SXACE Steel

SXACE Steel

Steel name: SXACE
Diagram No.: 1832
Chemical composition in weight %: No data. SKS3 steel: 0.95% C, 0.25% Si, 1.05% Mn, 0.75% Cr, 0.75% W.
Steel group: Tool steels
Properties: SXACE Cold work tool steel with superior toughness and excellent machinability.
Applications: All cold work press dies, punches, shear blades, wear resistant jigs, pins, etc. (In addition to applications of blanking dies where SX105V will not last, well-suited to bending and drawing dies).
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 1030 C/30 min
Tempering: See the diagram.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.