VP ATLAS Steel

VP ATLAS Steel

Steel name: VP ATLAS
Diagram No.: 1942
Mat.No. (Wr.Nr.) designation: 1.2711, 1.2714
AISI/SAE designation: P20 mod.
Chemical composition in weight %: No data
Steel group: Plastic mould tool steels
Properties: No data
Applications: No data
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 880-900 C/oil
Tempering: During tempering, the surface of the molds must be protected against decarburization and oxidation. Heat slowly and evenly at (100 C/h) until 400°C and then at most 300 C/h to the temperature of austenitization, between 880 and 900 C. Keep in temperature until complete homogenization of every piece. The cooling must be carried out in oil suitable for tempering, stirred and heated between 40 and 70 C until the mold temperature reaches 100 C. Then cool to the calm air between 50 and 70 C.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.