Vanadis 4 Extra SuperClean Steel

Vanadis 4 Extra SuperClean Steel

Steel name: Vanadis 4 Extra SuperClean
Diagram No.: 1997
Chemical composition in weight %: 1.40% C, 0.40% Si, 0.40% Mn, 4.70% Cr, 3.50% Mo, 3.70% V
Steel group: Cold work tool steels
Properties: No data
Applications: Vanadis 4 Extra SuperClean is especially suitable for applications where adhesive wear and/or chipping are the dominant failure mechanisms.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: Austenitising temperature: 940-1150°C. Normally 1020°C. For large sections >70 mm, use 1060°C or above. For the very best wear resistance, use 1100-1150°C. Holding time: 30 min. up to 1100°C, 15 min. above 1100°C. Quenching media: N2 with sufficient overpressure quenching in vacuum furnace. Martempering bath or fluidised bed at 500-550°C. Martempering bath or fluidised bed at 200-350°C
Tempering: See the diagram.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.