ANTINIT N680 Steel

ANTINIT N680 Steel

Steel name: ANTINIT N680
Diagram No.: 1998
Chemical composition in weight %: 0.54% C, 0.45% Si, 0.40% Mn, 17.30% Cr, 1.10% Mo, 0.10% V, +N
Steel group: Stainless steels
Properties: No data
Applications: Cutting tools of all kinds, requiring higher corrosion resistance and a durable cutting edge, e.g. knives for the meat processing industry. Cutting tools, blades of different shapes with high cutting hardness and toughness.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 980-1040 C/15-30 min
Tempering: See the diagram.
Diagram note: Tempering should immediately follow hardening. It is recommended to temper at least twice. Time in furnace: 1 hour for each 20 mm of workpiece thickness but at least 2 hours

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.