Formvar Steel

Formvar Steel

Steel name: Formvar
Diagram No.: 2014
Chemical composition in weight %: 0.35% C, 0.20% Si, 0.50% Mn, 5.00% Cr, 2.30% Mo, 0.60% V
Steel group: Hot work tool steels
Properties: No data
Applications: No data
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 1000–1030°C (1830–1890°F). Recommended quenching media: High speed gas/circulating atmosphere. Vacuum (high speed gas with sufficient positive pressure). An interrupted quench at 320–450°C (610–840°F) is recommended where distortion control and quench cracking are a concern. Martempering bath, salt bath or fluidized bed at 450–550°C (840–1020°F). Martempering bath, salt bath or fluidized bed at 180–200°C (360–390°F). Warm oil, approx. 80°C (180°F)
Tempering: Tempering in the range of 500–550°C (930–1020°F) for the intended final hardness will result in a lower toughness.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.