Scana TM Steel

Scana TM Steel

Steel name: Scana TM
Diagram No.: 2033
Chemical composition in weight %: 0.26% C, 0.25% Si, 1.50% Mn, 1.40% Cr, 0.70% Mo, 2.00% Ni, + others
Steel group: Plastic mould tool steels
Properties: No data
Applications: Crack sensitive cavities for plastic injection moulds with special requirements on wear resistance, grainability and polishability. Mould steel for graining and high polishing, for decorative car parts, chromiump lated plastic parts, car lights, electronics, TV frames, whiteware, compression moulding, prossecing of strengthen plastics, moulds for weld less injection moulding etc.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 830-880 C/oil or water(down to 130°C)
Tempering: See the diagram.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.