DRX Steel

DRX Steel

Steel name: DRX
Diagram No.: 2041
Chemical composition in weight %: 0.50% C, 0.30% Si, 0.70% Mn, 3.25% Cr, 1.40% Mo
Steel group: Tool steels
Properties: No data
Applications: Finkl DRX is recommended for plastic molds that require higher wear resistance than available with typical mold steels.
Finkl DRX is recommended for hot heading, hot forging, hot punching, hot piercing, and hot trimming dies. DRX is also recommended for heavy duty hot and cold shear blades, forming tools, and bending tools.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: [1700-1750F] (925-950 C) soaking 30 min. Small sections - cool in air. Medium or Large sections - cool in oil.
Tempering: See figure; hold 1 hr. per inch (25 min. per cm) of thickness.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.