1.1730 Steel

1.1730 Steel

Steel name: 1.1730
Diagram No.: 2214
Mat.No. (Wr.Nr.) designation: 1.1730
DIN designation: C45U
AISI/SAE designation: 1045
Chemical composition in weight %: 0.45% C, 0.30% Si, 0.70% Mn
Steel group: Unalloyed tool steels
Properties: Unalloyed tool steel with excellent machinability; chilled cast steel, suitable for flame and inductive hardening.
Applications: Unhardenend parts for mould and jig construction or plates and frames for tools and dies.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 800 to 830 °C quenching in water obtainable hardness: 58 HRC, hardening depth: 3-5 mm, max. 15 mm through-hardening thickness.
Tempering: Slow heating to tempering temperature immediately after hardening, to 180 to 300 °C depending on desired hardness, 1 hour per 20 mm: min. 2 hours.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.