Thermodur 2344 Steel

Thermodur 2344 Steel

Steel name: Thermodur 2344
Diagram No.: 2372
Mat.No. (Wr.Nr.) designation: 1.2344
AISI/SAE designation: H13
AFNOR designation: Z40CDV5
Chemical composition in weight %: 0.40% C, 1.00% Si, 5.30% Cr, 1.40% Mo, 1.00% V
Steel group: Hot work tool steels
Properties: High hot-wear resistance and hot tensile strength as well as good toughness, thermal conductivity and insusceptibility to hotcracking. Can be water-cooled to a limited extent.
Applications: Besides applications typical for the area of hot-work steels, this grade is mainly used for ejector pins, tool holders and shrink fit chucks.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 1020 – 1050 C, air, oil or salt bath 500-550 C.
Tempering: See the diagram.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.