FSR Steel

FSR Steel

Steel name: FSR
Diagram No.: 2500
Chemical composition in weight %: 1.20% C, 0.30% Si, 0.30% Mn, 11.50% Cr, 1.40% Mo, 1.70% V, 2.40% W
Steel group: Cold work tool steels
Properties: FSR is a cold-work tool steel based on 11.5% Cr. The remaining alloying elements give FSR the necessary tempering resistance and wear resistance. Compared to a similarly used high-speed steel HS6-5-2C, FSR is characterized by better toughness at comparable performance.
Applications: Cutting tools with special wear resistance for processing silicided or austenitic sheets or hardened strip steel, fine blanking tools. Cold extrusion tools. Thread rolling tools. Broaches. Extruder screws.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 1150 - 1180 °C. Hot strip from 450 - 550 °C or oil, interrupt oil cooling at approx. 400 °C.
Tempering: 540 - 550 °C.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.