LO-K 2767 Steel

LO-K 2767 Steel

Steel name: LO-K 2767
Diagram No.: 2526
Mat.No. (Wr.Nr.) designation: 1.2767
DIN designation: 45NiCrMo16
BS designation: Type EN3OB
Chemical composition in weight %: 0.45% C, 1.40% Cr, 0.30% Mo, 4.00% Ni
Steel group: Tool steels
Properties: Tool steel with highest toughness, that can be used for both cold and hot work, with good polishability and good photoetchability.
Applications: LO-K 2767 is the standard grade for shear blades to cut big sheet thicknesses or for shearing and bending a wide range of material thicknesses, e.g. scrap shear blades. Other applications are in the field of highly polished plastic molds, embossing tools, cutlery punches, bending tools, reinforcing rings and as hot pressing tools with complex engravings for light and heavy metal processing.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 840 – 870 °C, air /oil /gas-stream.
Tempering: 220 – 240 °C.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.