LO-QPM T15 Steel

LO-QPM T15 Steel

Steel name: LO-QPM T15
Diagram No.: 2534
Mat.No. (Wr.Nr.) designation: 1.3251
AISI/SAE designation: AISI T15
Chemical composition in weight %: 1.55% C, 0.30% Si, 0.30% Mn, 4.00% Cr, 5.00% V, 12.00% W, 5.00% Co
Steel group: PM high speed steels
Properties: Powder metallurgically produced high-performance high-speed steel. High tungsten alloy grade with increased cobalt and vanadium content for higher requirements in the field of compressive strength and wear resistance as well as hot strength.
Applications: Is used for highly stressed punches and dies for punching medium-hard to spring-hard materials, especially in stainless steel, press punches for cold and semi-hot forming as well as machining tools for high-strength and difficult-to-machine materials.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 1100 - 1260 °C, depending on the selected hardening temperature.
Tempering: 560 °C, cooling down to room temperature.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.