KeyLos 2311 Steel

KeyLos 2311 Steel

Steel name: KeyLos 2311
Diagram No.: 2556
Mat.No. (Wr.Nr.) designation: 1.2311
DIN designation: 40CrMnMo7
Chemical composition in weight %: 0.35-0.45% C, 0.20-0.40% Si, 1.30-1.60% Mn, 1.80-2.10% Cr, 0.15-0.25% Mo
Steel group: Plastic mould steels
Properties: KeyLos 2311 is a steel designed for the manufacture of small sized moulds.
Applications: Plastic moulding: Small and medium sized moulds for the automotive industry, moulds for food industry products, moulds for rubber pressing, pressure moulds (SMC, BMC), bolsters.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 860 °C. Soaking time: 60 min every 25 mm thickness. Oil or water quench.
Tempering: The tempering temperature to be applied to the material depends on the required mechanical properties.
Diagram note: No data

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.