K305 Steel

K305 Steel

Steel name: K305
Diagram No.: 2566
Mat.No. (Wr.Nr.) designation: 1.2363
DIN designation: X100CrMoV5
AISI/SAE designation: A2
JIS designation: SKD12
Chemical composition in weight %: 1.00% C, 0.30% Si, 0.55% Mn, 5.20% Cr, 1.10% Mo, 0.25% V
Steel group: Cold work tool steels
Properties: Air hardening cold work tool steel with good dimensional stability, high resistance to wear and good machining properties.
Applications: Machine knife (for producers). Rolling Cold Forming. Fine Blanking, Stamping, Blanking.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 950-980 C. Oil, salt bath 428 to 482°F or 932 to 1022°F (220 to 250°C or 500 to 550°C), air, gas Holding time after temperature equalization: 15 to 30 minutes. After hardening, tempering to the desired working hardness, see tempering chart.
Tempering: See the diagram.
Diagram note: Hardening temperature: 970C. Specimen size: square 20 mm.

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.