H10 Mod. Steel

H10 Mod. Steel

Steel name: H10 Mod.
Diagram No.: 473
AISI/SAE designation: H10A
Chemical composition in weight %: 0.35% C, 1.00% Si, 0.30% Mn, 3.30% Cr, 2.45% Mo, 0.65% V, 2.00% Co
Steel group: Hot work tool steels
Properties: No data
Applications: H10 Mod. is recommended for difficult hot work tooling applications such as hot punches, die casting dies, forging dies, hot shear blades, hot gripper dies, and extrusion tooling.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 1038^oC/air, gas, oil
Tempering: See the diagram
Diagram note: Air cooled and double tempered.

Hardenability Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as the become available.