X210Cr12 Steel

X210Cr12 Steel

Steel name: X210Cr12
Diagram No.: 569
DIN designation: X210Cr12
Mat.No. (Wr.Nr.) designation: 1.2080
Chemical composition in weight %: 2.00% C, 0.35% Si, 0.30% Mn, 11.50% Cr
Steel group: Cold work tool steels
Applications: High performance blanking and punching dies for sheet thickness up to 3 mm; circular and flat shear blades for sheet thickness up to 2 mm; cold drawing tools, broaches; tools for the production of nails, screws, nuts and rivets; cold extrusion tools; cold hobbing tools; flanging rolls; guide rolls; rollers of all shapes for continous production of steel tubes and profiles; cold forming tools for ceramics and powder metallurgy and similar tools.
Reference: Not shown in this demo version.

Heat Treatment
Hardening: 930-960^oC/oil, hot bath
Tempering: See the diagram
Diagram note: Specimen diameter: 25 mm, Hardening: 950^oC/oil.

Tempering Diagram

Price: 20.00 US $
Buy Online Tempering Diagram

Other Steel Data links
Carbides in Steel
CCT and TTT Diagrams of Steels
CCT and TTT Diagram Calculating Service
Hardenability Diagrams of Steels
Hardenability Calculating Service
Macro Defects in Steel
Metal Etchants
Non-Metallic Inclusions in Steel
Semiconductor Etchants

Disclaimer: The material data is a central depository of information based on global actual tests and calculated software data that is available to the public for a fee. The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. There is no representation that the recipient of this literature will receive updated editions as the become available.