Alphabetical Index
Browse by Elements
Keyword Search
ASTM Electrolytes
Macro Etchants
Micro Etchants
Named Etchants
New Etchants
Al and Al Alloys
Cu and Cu Alloys
Fe and Fe Alloys
Ni and Ni Alloys
Carbide Etchants
Fluoride Etchants
Nitride Etchants
Other Etchants
Oxide Etchants
Phosphide Etchants
Single Crystal Etchants
Thin Film Etchants
Wafer Etchants
Help
Home
Micro Etchants
(Al, Ti)C carbide - Chemical etching
(Al, Ti)N specimens - Chemical etching
(Al,Ti)C, VC - Chemical etching
(Al,Ti)N, AlN-Y2O3, TiN - Chemical etching
(Fe, Al)S samples - Chemical etching
(Fe, Si)C carbide - Chemical etching
(Ga,Al)As-Be p-type thin films - Chemical etching
(RE)N12 specimens - Chemical etching
(Th, U)C with a U/Th ratio of less than 3ThC2 - Chemical etching
(Th, U)C2 carbide - Chemical etching
(Th, U)C2 carbide - Chemical etching
(U,Pu)C - Chemical etching
(Y2O3)m(ZrO2)(1-m) (100) wafers - Chemical polishing
0.3P bearing stainless steel - Fe-18Cr-10Ni-0.3P
0.52C-15Cr steel - Chemical etching
100 etchant - Ge (100) wafers - Chemical etching
100Cr6 steel - Carbide contrasting
1045 forged steel - Chemical etching
1212 steels - Chemical etching
14CrMOV6-3 steel - Sample preparation
14MoV6-3 steel - Electrolytic-potentiostatic isolation of residues
15% Shibuichi - Sterling silver BiMetalb (Au-Ag) - One layer Shibuichi, one layer Sterling silver
17-4-PM stainless steel - 0.04C-16.5Cr-3.6Cu-4.25Ni-0.25Mn
18% Ni maraging steels - Chemical etching
18-8 type 304 stainless steel - Chemical etching
18/8 Stainless steels - Etching for delta ferrite
18/8 Stainless steels - Etching for delta ferrite
18/8 Stainless steels - Etching for delta ferrite
18/8 Stainless steels - Etching for delta ferrite
18/8 Stainless steels - Etching for delta ferrite
18/8 Stainless steels - Etching for delta ferrite
18/8 Stainless steels - Etching for delta ferrite
18/8 and 13-30% Cr steels - Revelas the grain boundaries of the matrix
18/8 stainless steels - Etching for delta ferrite
111 etchant - Ge (111) and Si (111) wafers - Chemical polishing/etching
20-20 and 25-20 Cr-Ni steels - For distinguishing carbides and sigma phase
22K/Sterling silver BiMetal (Au-Ag) - Alloy composition in the weight % 12.5% 22K gold, 87.5% sterling silver
22k gold-Au - Chemical etching
2XXX and 7XXX Al alloys - Chemical etching
3% Si-Fe specimen - Electrolytic polishing
3% Silicon iron - Electrolytic polishing
310 stainless steel - Fe-25Cr-21Ni-1.3Mn-0.7Si-0.3Mo-0.25Cu-0.04C
316 stainless steel - Fe-16/18Cr-10/14Ni-2/3Mo-max.2Mn-max.1Si (+ < 0.08 C)
316 stainless steels - Potentiostatic etching
347 stainless steel - Chemical etching
4 InO31 SnO2 specimens - Chemical etching
4FeO.2Fe2O3.2Si02.4H2O, (001) cleaved wafers - Dislocation etching
4In2O3-1SnO2 as thin film surface coatings - Chemical etching
5% Al and 2.5% Sn and Ti, 6% Al, and 3% Sn and Ti alloys - Chemical etching
51 etchant - GaAs (111) wafer - Chemical etching
6.6.1 etchant - For etch pits on InP, InPAs, GeInPAs
6061 aluminum - EBSD sample preparation
60Pb-40Sn #62 solder - Chemical cleaning
68Ni-31.9Fe-0.1Mg and 63Ni-35Fe-2Mo single crystals - Chemical etching
6XXX Al alloys - Chemical etching
718 alloy - Ni-0.03C-19Cr-3Mo-18Fe-0.6Al-1Ti-5Nb+Ta
72Fe-5.5Al-22Cr-0.5Co Kanthal - Chemical etching
79Ni-17Fe-44Mo (111) oriented Permalloy wafers - Electrolytic polishing
79Ni-17Fe-4Mo Permalloy single crystal specimens - Chemical polishing
7XXX Al alloys - Chemical etching
92.5.3 etchant - Steel for high temperatures
A etchant
A non electrolytic etchant for Kovar - Chemical etching
A/B etchant - Al2O3 clear fused sapphire blanks and (0001) single crystal oriented blanks
A/B etchant - GaAs (111) wafers with zinc diffusion - Chemical etching
A/B etchant - GaSb (100) wafers Te-doped - Chemical etching
A/B etchant - InAs (111), (110) and (100) wafers - Chemical etching
A/B etchant - InP (TTT)B wafers - Chemical etching
AB etchant (RCA) - Glass-thin film deposition and growth - Chemical cleaning
AB etchant, diluted - Alminium gallium arsenide (Al(x) Ga(1-x) As) - Dislocation etching
AB etchant, modified - Gallium arsenide
AB etchant, modified - Indium phosphide (InP) - Chemical etching
ABS, HIPS and PPO - Chemical etching
AFC 77 martensitic stainless steel - Chemical etching
AG-21's etchant for superalloy - Chemical etching
AHA etchant - For GaAs
AISI 304 steel - Dislocation etching
AISI 316 stainless steel - Fe-0.06C-<2Mn-<1Si-10/14Ni-16/18Cr
AISI 316 stainless steel - Fe-17.5Cr-10Ni-2.5Mo-2Mn-0.5Si-0.1C
AISI 321 stainless steel - Fe-18Cr-8Ni-0.4Ti
AISI 347 stainless steel - Fe-18Cr-8Ni-0.4Nb
AISI 4140N steel - Chemical etching
AISI T410 martensitic stainless steel - Revealing the grain size
ASTM dislocation etchant - Dislocation etching
ASTM etchant No. 1 - For Al base alloys
ASTM etchant No. 10 - Beryllium - Chemical etching
ASTM etchant No. 10 - For Be
ASTM etchant No. 10 - Ni superalloys - Chemical etching
ASTM etchant No. 100 - Fe + 12-20 Cr + 4-10 Ni + <7% steels - Chemical etching
ASTM etchant No. 100 - Ferric chloride - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 100 - Non stainless maraging steels - Chemical etching
ASTM etchant No. 101 - Chrome regia - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 101 - Fe + 15-30 Cr + 6-40 Ni + <5% steels - Chemical etching
ASTM etchant No. 102 - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 102 - Fe + 15-30 Cr + 6-40 Ni + <5% steels - Electrolytic etching
ASTM etchant No. 103 - Fe + 16-25 Cr + 3-6 Ni + 5-1C
ASTM etchant No. 103 - Fe + 16-25 Cr + 3-6 Ni + 5-1C steels - Chemical etching
ASTM etchant No. 103 - Fe + 16-25 Cr + 3-6 Ni + 5-1C steels - Chemical etching
ASTM etchant No. 104 - Fe + 16-25 Cr + 3-6 Ni + 5-1C steels - Chemical etching
ASTM etchant No. 104 - Fe + 16-25 Cr + 3-6 Ni + 5-1C steels - Chemical etching
ASTM etchant No. 104 - Frank's etchant - Fe + 16-25 Cr + 3-6 Ni + 5-1C
ASTM etchant No. 105 - 92-5-3 etchant - Steel for high temperatures
ASTM etchant No. 105 - High temperature steels - Chemical etching
ASTM etchant No. 105 - Ni superalloys - Chemical etching
ASTM etchant No. 106 - High temperature steels - Chemical etching
ASTM etchant No. 106 - Steel for high temperatures
ASTM etchant No. 107 - E-etchant (EI-IR etchant) - Steel for high temperatures
ASTM etchant No. 107 - High temperature steels - Electrolytic etching
ASTM etchant No. 107 - Ni superalloys - Electrolytic etching
ASTM etchant No. 107 - Ni superalloys - Electrolytic etching
ASTM etchant No. 107 - Ni-Fe alloys - Electrolytic etching
ASTM etchant No. 108 - High temperature steels - Electrolytic etching
ASTM etchant No. 108 - Pure Ni and high Ni alloys - Electrolytic etching
ASTM etchant No. 108 - Steel for high temperatures
ASTM etchant No. 109 - HCl-HNO3-CuCl2 x H2O - Non stainless maraging steels
ASTM etchant No. 109 - Non stainless maraging steels - Chemical etching
ASTM etchant No. 11 - Beryllium - Chemical etching
ASTM etchant No. 11 - For Be allloys
ASTM etchant No. 11 - Ti alloys - Chemical etching
ASTM etchant No. 110 - Tool steels
ASTM etchant No. 110 - Tool steels - Chemical etching
ASTM etchant No. 111 - Fe superalloys - Electrolytic etching
ASTM etchant No. 111 - Iron
ASTM etchant No. 111 - Ni superalloys - Chemical etching
ASTM etchant No. 112 - Pb + Ca alloys - Chemical etching
ASTM etchant No. 112 - Pb+Ca alloys
ASTM etchant No. 113 - Pb + Ca alloys - Chemical etching
ASTM etchant No. 113 - Acetic/nitric - Pb + <2 Sb alloys
ASTM etchant No. 113 - Pb + >2 Sb alloys - Chemical etching
ASTM etchant No. 114 - Acetic/nitric - Pb + <2 Sb alloys
ASTM etchant No. 114 - Pb + >2 Sb alloys - Chemical etching
ASTM etchant No. 114Pb + <2 Sb alloys - Chemical etching
ASTM etchant No. 115 - Pb + <2 Sb alloys
ASTM etchant No. 115 - Pb + <2 Sb alloys - Chemical etching
ASTM etchant No. 116 - Pb alloys
ASTM etchant No. 116 - Pb alloys - Chemical etching
ASTM etchant No. 116 - Sn-Pb alloys - Chemical etching
ASTM etchant No. 117 - Sn-Fe
ASTM etchant No. 117a - Sn-Fe alloys - Chemical etching
ASTM etchant No. 117b - Pb alloys - Chemical etching
ASTM etchant No. 118 - Glycol - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 118 - Magnesium - Chemical etching
ASTM etchant No. 118 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 118 - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 118 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 119 - Acetic glycol - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 119 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 119 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 119 - Mg-Mn alloys - Chemical etching
ASTM etchant No. 119 - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 119 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 119 - Pure magnesium - Chemical etching
ASTM etchant No. 12 - Aqua Regia - For chromium base alloys
ASTM etchant No. 12 - Chromium - Chemical etching
ASTM etchant No. 12 - Ni superalloys - Chemical etching
ASTM etchant No. 120 - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 120 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 120 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 120 - Mg-Rare Earth-Zr alloys - Chemical etching
ASTM etchant No. 120 - Mg-Zn-Th-Zr alloys - Chemical etching
ASTM etchant No. 120 - Pure magnesium - Chemical etching
ASTM etchant No. 121 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 121 - Mg-Rare Earth-Zr alloys - Chemical etching
ASTM etchant No. 121 - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 121 - Mg-Zn-Th-Zr alloys - Chemical etching
ASTM etchant No. 121 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 121 - Phospho picral - Mg-Al, Mg-Al-Zn (Al + Zn >5%
ASTM etchant No. 121 - Pure magnesium - Chemical etching
ASTM etchant No. 122 - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 122 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 122 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 122 - Mg-Mn alloys - Chemical etching
ASTM etchant No. 122 - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 122 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 122 - Pure magnesium - Chemical etching
ASTM etchant No. 123 - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 123 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Electrolytic etching
ASTM etchant No. 123 - Pure magnesium - Electrolytic etching
ASTM etchant No. 124 - Acetic-picral - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 124 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 124 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 124 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 124 - Mg-Mn alloys - Chemical etching
ASTM etchant No. 124 - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 124 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 125 - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 125 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 125 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 125 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 125 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 126 - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 126 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 126 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 126 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 126 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 127 - Acetic-picral - Mg-Al, Mg-Al-Zn (Al + Zn <5%
ASTM etchant No. 127 - Mg-Al, Mg-Al-Zn (Al + Zn <5% alloys - Chemical etching
ASTM etchant No. 127 - Mg-Al, Mg-Al-Zn (Al + Zn 5% alloys - Chemical etching
ASTM etchant No. 127 - Mg-Al, Mg-Al-Zn (Al + Zn >5% alloys - Chemical etching
ASTM etchant No. 127 - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 127 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 128 - Mg-Zn-Zr
ASTM etchant No. 128 - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 129 - Molybdenum
ASTM etchant No. 129 - Molybdenum - Chemical etching
ASTM etchant No. 129 - Molybdenum - Chemical etching
ASTM etchant No. 129 - Molybdenum - Chemical etching
ASTM etchant No. 129 - Niobium - Chemical etching
ASTM etchant No. 129 - Niobium - Chemical etching
ASTM etchant No. 13 - Oxalic acid - For Cr base alloys
ASTM etchant No. 130 - Molybdenum
ASTM etchant No. 130 - Molybdenum - Chemical etching
ASTM etchant No. 130 - Molybdenum - Electrolytic etching
ASTM etchant No. 131 - Molybdenum
ASTM etchant No. 131 - Molybdenum - Electrolytic etching
ASTM etchant No. 131 - Molybdenum - Electrolytic etching
ASTM etchant No. 131 - Tungsten - Electrolytic etching
ASTM etchant No. 131 - Tungsten - Electrolytic etching
ASTM etchant No. 132 - Molybdenum
ASTM etchant No. 132a - As cast molybdenum - Chemical etching
ASTM etchant No. 132a - As cast tungsten - Chemical etching
ASTM etchant No. 133 - Ni superalloys - Chemical etching
ASTM etchant No. 133 - Ni-Ti
ASTM etchant No. 133 - Ni-Ti alloys - Chemical etching
ASTM etchant No. 133 - Pure Ni and high Ni alloys - Chemical etching
ASTM etchant No. 134 - Ni-Cr
ASTM etchant No. 134 - Ni-Cr alloys - Electrolytic etching
ASTM etchant No. 134 - Ni-Fe alloys - Electrolytic etching
ASTM etchant No. 134 - Pure Ni and high Ni alloys - Electrolytic etching
ASTM etchant No. 135 - Pure Ni and high Ni alloys
ASTM etchant No. 135 - Pure Ni and high Ni alloys - Chemical etching
ASTM etchant No. 136 - Pure Ni and high Ni alloys
ASTM etchant No. 136 - Pure Ni and high Ni alloys - Chemical etching
ASTM etchant No. 137 - Pure Ni and high Ni alloys
ASTM etchant No. 137 - Pure Ni and high Ni alloys - Electrolytic etching
ASTM etchant No. 138 - Carapella's etchant - Ni-Ag
ASTM etchant No. 138 - Ni superalloys - Chemical etching
ASTM etchant No. 138 - Ni-Ag alloys - Chemical etching
ASTM etchant No. 139 - Ni-Ag
ASTM etchant No. 139 - Ni-Ag alloys - Chemical etching
ASTM etchant No. 13a - Fe + 15-30 Cr + 6-40 Ni + <5% - Electrolytic etching
ASTM etchant No. 13a - Ni superalloys - Electrolytic etching
ASTM etchant No. 13a - Ni-Cr alloys - Electrolytic etching
ASTM etchant No. 13b - Fe + 15-30 Cr + 6-40 Ni + <5% steels - Electrolytic etching
ASTM etchant No. 13b - Rhenium - Electrolytic etching
ASTM etchant No. 13c - Chromium - Electrolytic etching
ASTM etchant No. 14 - For Co
ASTM etchant No. 14 - Tool steels - Chemical etching
ASTM etchant No. 140 - Ni-Al
ASTM etchant No. 140 - Ni-Al alloys - Chemical etching
ASTM etchant No. 140 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 141 - Contrast etchant - Ni-Al
ASTM etchant No. 141 - Ni-Al alloys - Chemical etching
ASTM etchant No. 141 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 142 - Ni-Al
ASTM etchant No. 142 - Ni-Al alloys - Electrolytic etching
ASTM etchant No. 143 - Ni-Al
ASTM etchant No. 143 - Ni-Al alloys - Chemical etching
ASTM etchant No. 143 - Ni-Mo alloys - Chemical etching
ASTM etchant No. 143 - Ni-Ti alloys - Chemical etching
ASTM etchant No. 144 - Ni-Cr
ASTM etchant No. 144 - Ni-Cr alloys - Electrolytic etching
ASTM etchant No. 145 - Ni-Cr
ASTM etchant No. 145 - Ni-Cr alloys - Electrolytic etching
ASTM etchant No. 146 - Ni-Cr
ASTM etchant No. 146 - Ni-Cr alloys - Chemical etching
ASTM etchant No. 147 - Ni-Cr
ASTM etchant No. 147 - Ni-Cr alloys - Chemical etching
ASTM etchant No. 148 - Ni-Fe
ASTM etchant No. 148 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 149 - Ni-Fe
ASTM etchant No. 149 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 15 - For Co
ASTM etchant No. 150 - Ni-Fe
ASTM etchant No. 150 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 151 - Ni-Ti
ASTM etchant No. 151 - Ni-Ti alloys - Chemical etching
ASTM etchant No. 152 - Ni-Zn
ASTM etchant No. 152 - Ni-Zn alloys - Chemical etching
ASTM etchant No. 153 - Ni superalloys
ASTM etchant No. 153 - Ni superalloys - Chemical etching
ASTM etchant No. 154 - Ni superalloys
ASTM etchant No. 154 - Ni superalloys - Chemical etching
ASTM etchant No. 154 - Ni superalloys - Chemical etching
ASTM etchant No. 155 - Beraha's E etchant - Ni superalloys
ASTM etchant No. 155 - Ni superalloys - Chemical etching
ASTM etchant No. 156 - Ni superalloys
ASTM etchant No. 156 - Ni superalloys - Electrolytic etching
ASTM etchant No. 157 - Hastelloy-W - Chemical etching
ASTM etchant No. 157 - Ni Hastelloy-W
ASTM etchant No. 158 - Niobium
ASTM etchant No. 158 - Niobium - Chemical etching
ASTM etchant No. 158 - Niobium - Chemical etching
ASTM etchant No. 158 - Ta alloys - Chemical etching
ASTM etchant No. 158 - Tantalum - Chemical etching
ASTM etchant No. 158 - Ti alloys - Chemical etching
ASTM etchant No. 159 - Niobium
ASTM etchant No. 159 - Niobium - Chemical etching
ASTM etchant No. 159 - Niobium - Chemical etching
ASTM etchant No. 159 - Ta alloys - Chemical etching
ASTM etchant No. 159 - Tantalum - Chemical etching
ASTM etchant No. 16 - Co high temperature alloys - Electrolytic etching
ASTM etchant No. 16 - Fe as residual metal in vacuum systems - Chemical cleaning
ASTM etchant No. 16 - Hydrochloric acid - For Co, high temperature alloys
ASTM etchant No. 160 - Niobium
ASTM etchant No. 160 - Niobium - Chemical etching
ASTM etchant No. 160 - Niobium - Chemical etching
ASTM etchant No. 160 - Niobium - Chemical etching
ASTM etchant No. 161 - Niobium
ASTM etchant No. 161 - Niobium - Chemical etching
ASTM etchant No. 161 - Niobium - Chemical etching
ASTM etchant No. 161 - Ta alloys - Chemical etching
ASTM etchant No. 161 - TaN thin films - Chemical etching
ASTM etchant No. 161 - Tantalum - Chemical etching
ASTM etchant No. 162 - Niobium
ASTM etchant No. 162 - Niobium - Chemical etching
ASTM etchant No. 162B - Niobium - Chemical etching
ASTM etchant No. 163 - Niobium
ASTM etchant No. 163 - Niobium - Chemical etching
ASTM etchant No. 163 - Niobium - Chemical etching
ASTM etchant No. 163 - Ta alloys - Chemical etching
ASTM etchant No. 163 - Tantalum - Chemical etching
ASTM etchant No. 164 - Niobium
ASTM etchant No. 164 - Niobium - Chemical etching
ASTM etchant No. 164 - Niobium - Chemical etching
ASTM etchant No. 164 - Ta alloys - Chemical etching
ASTM etchant No. 164 - Tantalum - Chemical etching
ASTM etchant No. 164 - Tantalum - Chemical etching
ASTM etchant No. 165 - Vanadium
ASTM etchant No. 165a - Osmium - Electrolytic etching
ASTM etchant No. 165a - Osmium - Electrolytic etching
ASTM etchant No. 165a - Pd alloys - Electrolytic etching
ASTM etchant No. 165a - Pure palladium - Electrolytic etching
ASTM etchant No. 165b - Pure vanadium - Electrolytic etching
ASTM etchant No. 166 - Pd alloys
ASTM etchant No. 166 - Pd alloys - Chemical etching
ASTM etchant No. 166 - Pure palladium - Chemical etching
ASTM etchant No. 167 - Pt alloys
ASTM etchant No. 167 - Pt alloys - Chemical etching
ASTM etchant No. 167 - Pure platinum - Chemical etching
ASTM etchant No. 168 - Pt-10% Rh
ASTM etchant No. 168 - Pt-10% Rh alloy - Chemical etching
ASTM etchant No. 169 - Plutonium
ASTM etchant No. 169 - Plutonium - Electrolytic etching
ASTM etchant No. 17 - For Co
ASTM etchant No. 170 - Rhenium
ASTM etchant No. 170a - Rhenium - Chemical etching
ASTM etchant No. 170a - Ti alloys - Chemical etching
ASTM etchant No. 170a - U Beryllides - Chemical etching
ASTM etchant No. 170b - Pure vanadium - Chemical etching
ASTM etchant No. 171 - Hydrochloric acid - Rhodium
ASTM etchant No. 171 - Rhodium - Electrolytic etching
ASTM etchant No. 172 - Pure Ag
ASTM etchant No. 172 - Pure silver - Chemical etching
ASTM etchant No. 173 - Ag solders
ASTM etchant No. 173 - Ag solders - Chemical etching
ASTM etchant No. 173 - Ag-Pd alloys - Chemical etching
ASTM etchant No. 173 - Pure Ag - Chemical etching
ASTM etchant No. 174 - Ag alloys
ASTM etchant No. 174 - Ag alloys - Chemical etching
ASTM etchant No. 175 - Ag alloys
ASTM etchant No. 175 - Ag alloys - Chemical etching
ASTM etchant No. 176 - Ag solders
ASTM etchant No. 176 - Ag solders - Chemical etching
ASTM etchant No. 177 - Pure tantalum - Chemical etching
ASTM etchant No. 177 - Tantalum
ASTM etchant No. 177 - Tantalum - Chemical etching
ASTM etchant No. 177 - Zn-Co alloys - Chemical etching
ASTM etchant No. 178 - Ta alloys
ASTM etchant No. 178 - Ta alloys - Chemical etching
ASTM etchant No. 178 - Tantalum - Chemical etching
ASTM etchant No. 178 - Ti alloys - Chemical etching
ASTM etchant No. 179 - Ta alloys
ASTM etchant No. 179 - Ta alloys - Chemical etching
ASTM etchant No. 18 - Chromic acid - For Co alloys, high temperature alloys
ASTM etchant No. 18 - Hard-Facing and tool metals - Electrolytic etching
ASTM etchant No. 18 - High temperature alloys - Electrolytic etching
ASTM etchant No. 18 - Ni superalloys - Electrolytic etching
ASTM etchant No. 18 - Pure titanium - Electrolytic etching
ASTM etchant No. 180 - Pure tin - Chemical etching
ASTM etchant No. 180 - Tin
ASTM etchant No. 181 - Pure tin
ASTM etchant No. 181 - Pure tin - Chemical etching
ASTM etchant No. 182 - Sn-Pb
ASTM etchant No. 182 - Sn-Pb alloys - Chemical etching
ASTM etchant No. 183 - Sn coatings (on steel)
ASTM etchant No. 183 - Sn coatings (on steel) - Chemical etching
ASTM etchant No. 183 - Sn-Pb alloys - Chemical etching
ASTM etchant No. 184 - Babbitts
ASTM etchant No. 184 - Sn babbitts - Chemical etching
ASTM etchant No. 185
ASTM etchant No. 186 - Pure titanium
ASTM etchant No. 186 - Pure titanium - Chemical etching
ASTM etchant No. 186 - Ti alloys - Chemical etching
ASTM etchant No. 187 - Kroll's etchant - Ti alloys
ASTM etchant No. 187 - Ti alloys - Chemical etching
ASTM etchant No. 188 - Mg-Al, Mg-Al-Zn (Al + Zn <5 alloys - Chemical etching
ASTM etchant No. 188 - Pure titanium
ASTM etchant No. 188 - Pure titanium - Chemical etching
ASTM etchant No. 188 - Ti alloys - Chemical etching
ASTM etchant No. 189 - Ti-5 Al-2.5 Sn
ASTM etchant No. 189 - Ti-5 Al-2.5 Sn alloys - Chemical etching
ASTM etchant No. 19 - Co Hard-Facing and tool metals - Chemical etching
ASTM etchant No. 19 - Co high temperature alloys - Chemical etching
ASTM etchant No. 19 - Groesbeck's etchant - For Co alloys, high temperature alloys
ASTM etchant No. 190 - Ti-6 Al-6V-2 Sn
ASTM etchant No. 190 - Ti-6 Al-6V-2 Sn alloys - Chemical etching
ASTM etchant No. 191 - Ti-Al-Zr
ASTM etchant No. 191 - Ti-Al-Zr alloys - Chemical etching
ASTM etchant No. 192 - Kroll's etchant - Ti alloys
ASTM etchant No. 192 - Ti alloys - Chemical etching
ASTM etchant No. 192 - Ti alloys - Chemical etching
ASTM etchant No. 192 - Ti-13V-11Cr3 Al (aged) alloys - Chemical etching
ASTM etchant No. 192 - Ti-8Mn alloys - Chemical etching
ASTM etchant No. 193 - Ti-Si
ASTM etchant No. 193 - Ti-Si alloys - Chemical etching
ASTM etchant No. 194 - Ti alloys
ASTM etchant No. 194 - Ti alloys - Chemical etching
ASTM etchant No. 195 - Pure uranium
ASTM etchant No. 195 - Pure uranium - Electrolytic etching
ASTM etchant No. 195 - U alloys - Electrolytic etching
ASTM etchant No. 196 - Pure uranium
ASTM etchant No. 196 - Pure uranium - Chemical etching
ASTM etchant No. 196 - U alloys - Chemical etching
ASTM etchant No. 197 - Pure vanadium
ASTM etchant No. 197 - Pure vanadium - Electrolytic etching
ASTM etchant No. 198 - Pure vanadium
ASTM etchant No. 198 - Pure vanadium - Chemical etching
ASTM etchant No. 198 - V alloys - Chemical etching
ASTM etchant No. 199 - V alloys
ASTM etchant No. 199 - V alloys - Chemical etching
ASTM etchant No. 19b - Ni superalloys - Chemical etching
ASTM etchant No. 1a - Aluminum 1000 series - Chemical etching
ASTM etchant No. 1a - Aluminum 2000 series - Chemical etching
ASTM etchant No. 1a - Aluminum 3000 series - Chemical etching
ASTM etchant No. 1a - Aluminum 4000 series - Chemical etching
ASTM etchant No. 1a - Aluminum 5000 series - Chemical etching
ASTM etchant No. 1a - Aluminum 6000 series - Chemical etching
ASTM etchant No. 1a - Aluminum 7000 series - Chemical etching
ASTM etchant No. 1a - Pure aluminum - Chemical etching
ASTM etchant No. 1b - Pure aluminum - Chemical etching
ASTM etchant No. 1c - Ti alloys - Chemical etching
ASTM etchant No. 1c - Ti alloys - Chemical etching
ASTM etchant No. 1d - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 1d - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 2 - Aluminum 1000 series - Chemical etching
ASTM etchant No. 2 - Aluminum 2000 series - Chemical etching
ASTM etchant No. 2 - Aluminum 5000 series - Chemical etching
ASTM etchant No. 2 - Aluminum 6000 series - Chemical etching
ASTM etchant No. 2 - Aluminum 6000 series - Chemical etching
ASTM etchant No. 2 - Aluminum 7000 series - Chemical etching
ASTM etchant No. 2 - NaOH (Hatch's etchant) - Al alloys
ASTM etchant No. 2 - Pure aluminum - Chemical etching
ASTM etchant No. 20 - Co Hard-Facing and tool metals - Chemical etching
ASTM etchant No. 20 - Co high temperature alloys - Chemical etching
ASTM etchant No. 20 - For Co alloys, high temperature alloys
ASTM etchant No. 200 - Potassium etchant - Pure zinc
ASTM etchant No. 200 - Pure zinc - Chemical etching
ASTM etchant No. 201 - Zn-Cu
ASTM etchant No. 201 - Zn-Cu alloys - Chemical etching
ASTM etchant No. 202 - Zinc die castings
ASTM etchant No. 202 - Zn Die castings - Chemical etching
ASTM etchant No. 203 - Zn-Cu
ASTM etchant No. 203 - Zn-Cu alloys - Electrolytic etching
ASTM etchant No. 204 - Zirconium
ASTM etchant No. 204 - Zirconium - Chemical etching
ASTM etchant No. 205 - Zirconium
ASTM etchant No. 205 - Zirconium - Chemical etching
ASTM etchant No. 206 - Zirconium
ASTM etchant No. 206 - Zirconium - Chemical etching
ASTM etchant No. 207 - U alloys
ASTM etchant No. 207 - U alloys - Chemical etching
ASTM etchant No. 208
ASTM etchant No. 209 - Molybdenum - Chemical etching
ASTM etchant No. 209 - Tungsten - Chemical etching
ASTM etchant No. 209 - W-Th
ASTM etchant No. 209 - W-Th alloys - Chemical etching
ASTM etchant No. 21 - Co high temperature alloys - Chemical etching
ASTM etchant No. 21 - For high temperature alloys
ASTM etchant No. 22 - HCl+H2O2 - For high temperature alloys
ASTM etchant No. 220 - Stainless steels - Chemical etching
ASTM etchant No. 22a - Ni superalloys - Chemical etching
ASTM etchant No. 22b - Co high temperature alloys - Chemical etching
ASTM etchant No. 23 - HCl-methanol
ASTM etchant No. 24 - Co high temperature alloys - Chemical etching
ASTM etchant No. 24 - HCl-HNO3-FeCl3 - For high temperature alloys
ASTM etchant No. 25 - Co high temperature alloys - Chemical etching
ASTM etchant No. 25 - High temperature steels - Chemical etching
ASTM etchant No. 25 - Marble's etchant - For high temperature alloys
ASTM etchant No. 25 - Ni superalloys - Chemical etching
ASTM etchant No. 25 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 25 - Pure Ni and high Ni alloys - Chemical etching
ASTM etchant No. 26 - Cu alloys - Chemical etching
ASTM etchant No. 26 - For Cu and alloys
ASTM etchant No. 26 - Pure copper - Chemical etching
ASTM etchant No. 27 - Cu alloys - Chemical etching
ASTM etchant No. 27 - For Cu and alloys
ASTM etchant No. 27 - Pure copper - Chemical etching
ASTM etchant No. 28 - Cu alloys - Chemical etching
ASTM etchant No. 28 - Cu alloys - Chemical etching
ASTM etchant No. 28 - Ferric nitrate - For Cu and alloys
ASTM etchant No. 28 - Pure copper - Chemical etching
ASTM etchant No. 28 - Pure copper - Chemical etching
ASTM etchant No. 29 - Cu alloys - Chemical etching
ASTM etchant No. 29 - Potassium dichromate - For Cu and alloys
ASTM etchant No. 29 - Pure copper - Chemical etching
ASTM etchant No. 3 - Aluminum 000 series - Chemical etching
ASTM etchant No. 3 - Aluminum 1000 series - Chemical etching
ASTM etchant No. 3 - Aluminum 2000 series - Chemical etching
ASTM etchant No. 3 - Aluminum 4000 series - Chemical etching
ASTM etchant No. 3 - Aluminum 5000 series - Chemical etching
ASTM etchant No. 3 - Aluminum 6000 series - Chemical etching
ASTM etchant No. 3 - Aluminum 7000 series - Chemical etching
ASTM etchant No. 3 - Keller's etchant - For Al and alloys
ASTM etchant No. 3 - Pure aluminum - Chemical etching
ASTM etchant No. 30 - Ag-Cu alloys - Chemical etching
ASTM etchant No. 30 - Cu alloys - Chemical etching
ASTM etchant No. 30 - NH4OH+H2O - For Cu and alloys
ASTM etchant No. 30 - Pure copper - Chemical etching
ASTM etchant No. 31 - Amonium persulphate - For Cu, Cu-Al, Cu-Ni-Zr, Cu alloys
ASTM etchant No. 31a - Fe + C - Chemical etching
ASTM etchant No. 31b - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 31c - Fe + 12-20 Cr + 4-10 Ni + <7% - Electrolytic etching
ASTM etchant No. 31c - Fe + 12-20 Cr + 4-10 Ni + 7% - Electrolytic etching
ASTM etchant No. 31c - Pure Ni and high Ni alloys - Electrolytic etching
ASTM etchant No. 31d - Pure copper - Chemical etching
ASTM etchant No. 31d - Cu alloys - Chemical etching
ASTM etchant No. 31d - Cu-Al (aluminum bronze) - Chemical etching
ASTM etchant No. 31d - Nickel silver - Chemical etching
ASTM etchant No. 32 - Chromic acid - For Cu, Cu-Ni-Zn, Cu alloys
ASTM etchant No. 32 - Cu alloys - Chemical etching
ASTM etchant No. 32 - Nickel silver - Chemical etching
ASTM etchant No. 32 - Pure copper - Chemical etching
ASTM etchant No. 33 - Chromic/hydrochloric - For Cu, Cu-Al, Cu-Ni, Cu alloys
ASTM etchant No. 33 - Cu alloys - Chemical etching
ASTM etchant No. 33 - Nickel silver - Chemical etching
ASTM etchant No. 33 - Pure copper - Chemical etching
ASTM etchant No. 34 - Cu-Ni alloys - Chemical etching
ASTM etchant No. 34 - For Cu, Cu-Al, Cu-Ni, Cu alloys
ASTM etchant No. 34b - Cu alloys - Chemical etching
ASTM etchant No. 34b - Cu-Al (aluminum bronze) - Chemical etching
ASTM etchant No. 34b - Pure copper - Chemical etching
ASTM etchant No. 35 - Cu alloys - Chemical etching
ASTM etchant No. 35 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 35 - Grard's No.1 etch - For Cu, Cu-Al, Cu alloy
ASTM etchant No. 35 - Pure copper - Chemical etching
ASTM etchant No. 36 - Cu alloys - Chemical etching
ASTM etchant No. 36 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 36 - For Cu, Cu-Al, Cu alloys
ASTM etchant No. 36 - Pure copper - Chemical etching
ASTM etchant No. 37 - Cu alloys - Chemical etching
ASTM etchant No. 37 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 37 - For Cu, Cu-Al, Cu alloys
ASTM etchant No. 37 - Pure copper - Chemical etching
ASTM etchant No. 38 - Cu alloys - Chemical etching
ASTM etchant No. 38 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 38 - Ni-Ag alloys - Chemical etching
ASTM etchant No. 38 - Pure copper - Chemical etching
ASTM etchant No. 38- For Cu, Cu-Al, Cu alloys
ASTM etchant No. 39 - Cu alloys - Chemical etching
ASTM etchant No. 39 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 39 - For Cu, Cu-Al, Cu alloys
ASTM etchant No. 39 - Pure copper - Chemical etching
ASTM etchant No. 3a - Ti alloys - Chemical etching
ASTM etchant No. 3b - Aluminum 7000 series - Chemical etching
ASTM etchant No. 4 - For Al and Al base alloys
ASTM etchant No. 4 - Pure aluminium - Electrolytic etching
ASTM etchant No. 40 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 40 - Cu-Ni alloys - Chemical etching
ASTM etchant No. 40 - For Cu, Cu-Al, Cu alloys
ASTM etchant No. 40 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 40 - Pure copper - Chemical etching
ASTM etchant No. 41 - Cu alloys - Chemical etching
ASTM etchant No. 41 - Cu-Be alloys - Chemical etching
ASTM etchant No. 41 - Cu-Cr alloys - Chemical etching
ASTM etchant No. 41 - Cu-Mn alloys - Chemical etching
ASTM etchant No. 41 - Cu-Si alloys - Chemical etching
ASTM etchant No. 41 - For Cu, Cu-Be, Cu-Cr, Cu-Mn, Cu-Si, Cu-Ni-Zn, Cu alloys
ASTM etchant No. 41 - Nickel silver - Chemical etching
ASTM etchant No. 41 - Pure copper - Chemical etching
ASTM etchant No. 42 - Cu alloys - Chemical etching
ASTM etchant No. 42 - For Cu, Cu-Ni-Zn, beta-brass
ASTM etchant No. 42 - Nickel silver - Chemical etching
ASTM etchant No. 42 - Pure copper - Chemical etching
ASTM etchant No. 43 - Cu alloys - Chemical etching
ASTM etchant No. 43 - For Cu and alloys
ASTM etchant No. 43 - Pure copper - Chemical etching
ASTM etchant No. 44 - Ammonium/peroxide - For Cu-Al, Cu alloys
ASTM etchant No. 44 - Cu alloys - Chemical etching
ASTM etchant No. 44 - Cu-Al (Aluminum bronze) - Chemical etching
ASTM etchant No. 45 - Cu-Al (Aluminum bronze) - Electrolytic etching
ASTM etchant No. 45 - Cu-Be alloys - Electrolytic etching
ASTM etchant No. 45 - For Cu-Al, Cu-Be
ASTM etchant No. 46 - Cu-Be
ASTM etchant No. 46 - Cu-Be alloys - Chemical etching
ASTM etchant No. 47 - Cu-Ni alloys - Chemical etching
ASTM etchant No. 47 - Cyanide/persulphate - For Cu-Ni
ASTM etchant No. 47 - Pure Ni and high Ni alloys - Chemical etching
ASTM etchant No. 48 - Cu-Ni alloys - Chemical etching
ASTM etchant No. 48 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 48 - For Cu-Ni
ASTM etchant No. 49 - Cu alloys - Electrolytic etching
ASTM etchant No. 49 - Cu alloys - Electrolytic etching
ASTM etchant No. 49 - Cu-Ni alloys - Electrolytic etching
ASTM etchant No. 49 - For Cu-Ni, Cu-Ni-Zn, Cu alloys, beta-brass
ASTM etchant No. 49 - Nickel silver - Electrolytic etching
ASTM etchant No. 5 - Aluminum 1000 series - Electrolytic etching
ASTM etchant No. 5 - Aluminum 3000 series - Electrolytic etching
ASTM etchant No. 5 - Aluminum 5000 series - Electrolytic etching
ASTM etchant No. 5 - Aluminum 6000 series - Electrolytic etching
ASTM etchant No. 5 - Aluminum 7000 series - Electrolytic etching
ASTM etchant No. 5 - Barker's etchant - For Al base alloys and brass
ASTM etchant No. 5 - Pure aluminum - Electrolytic etching
ASTM etchant No. 50 - Cu-Ni alloys - Chemical etching
ASTM etchant No. 50 - Ni-Ag alloys - Chemical etching
ASTM etchant No. 50 - Ni-Al alloys - Chemical etching
ASTM etchant No. 50 - Ni-Cr alloys - Chemical etching
ASTM etchant No. 50 - Ni-Fe alloys - Chemical etching
ASTM etchant No. 50 - Ni-Ti alloys - Chemical etching
ASTM etchant No. 50 - Nitric/acetic - For Cu-Ni
ASTM etchant No. 51 - Cu-Sn (Tin bronze) - Chemical etching
ASTM etchant No. 51 - For Cu-Sn
ASTM etchant No. 51 - Pure tin - Chemical etching
ASTM etchant No. 52 - Cu-Sn (Tin bronze) - Chemical etching
ASTM etchant No. 52 - Cu-Sn (tin bronze)
ASTM etchant No. 53 - Cu alloys - Chemical etching
ASTM etchant No. 53 - For Cu alloys (polish)
ASTM etchant No. 54 - Cu alloys - Electrolytic etching
ASTM etchant No. 54 - For brass
ASTM etchant No. 55 - Dysprosium - Chemical etching
ASTM etchant No. 55 - Erbium - Chemical etching
ASTM etchant No. 55 - For Dy, Er, Gd, Ho
ASTM etchant No. 55 - Gadolinium - Chemical etching
ASTM etchant No. 55 - Holmium - Chemical etching
ASTM etchant No. 56 - Dysprosium - Chemical etching
ASTM etchant No. 56 - Erbium - Chemical etching
ASTM etchant No. 56 - For Dy, Er, Gd, Ho
ASTM etchant No. 56 - Gadolinium - Chemical etching
ASTM etchant No. 56 - Holmium - Chemical etching
ASTM etchant No. 57 - Acetic acid/peroxide - For Gd
ASTM etchant No. 57 - Gadolinium - Chemical etching
ASTM etchant No. 57 - Pb + <2 Sb - Chemical etching
ASTM etchant No. 57 - Pure lead - Chemical etching
ASTM etchant No. 58 - For Ge
ASTM etchant No. 58 - Germanium - Chemical etching
ASTM etchant No. 59 - For Ge
ASTM etchant No. 59 - Germanium - Chemical etching
ASTM etchant No. 6 - Aluminum 1000 series - Chemical etching
ASTM etchant No. 6 - Aluminum 2000 series - Chemical etching
ASTM etchant No. 6 - Aluminum 3000 series - Chemical etching
ASTM etchant No. 6 - Aluminum 5000 series - Chemical etching
ASTM etchant No. 6 - Aluminum 6000 series - Chemical etching
ASTM etchant No. 6 - Aluminum 6000 series - Chemical etching
ASTM etchant No. 6 - Aluminum 7000 series - Chemical etching
ASTM etchant No. 6 - For Al base alloys
ASTM etchant No. 60 - CP4 etchant - For Ge
ASTM etchant No. 60 - Germanium - Chemical etching
ASTM etchant No. 61 - >90% noble metals - Chemical etching
ASTM etchant No. 61 - >90% noble metals - Chemical etching
ASTM etchant No. 61 - >90% noble metals - Chemical etching
ASTM etchant No. 61 - Ag alloys - Chemical etching
ASTM etchant No. 61 - For Au and noble metals (> 90%)
ASTM etchant No. 61 - Pure gold - Chemical etching
ASTM etchant No. 61 - Pure palladium - Chemical etching
ASTM etchant No. 62 - Ag alloys - Chemical etching
ASTM etchant No. 62 - Au alloys - Chemical etching
ASTM etchant No. 62 - For Au and alloys
ASTM etchant No. 62 - Pd alloys - Chemical etching
ASTM etchant No. 62 - Pure Ag - Chemical etching
ASTM etchant No. 62 - Pure gold - Chemical etching
ASTM etchant No. 62 - Pure palladium - Chemical etching
ASTM etchant No. 63 - Au alloys - Chemical etching
ASTM etchant No. 63 - For Au (polish) and Au alloys
ASTM etchant No. 63 - Pure gold - Chemical etching
ASTM etchant No. 64 - For Au alloys
ASTM etchant No. 64a - Pd alloys - Chemical etching
ASTM etchant No. 64a - Pure platinum - Chemical etching
ASTM etchant No. 64b - Au alloys - Chemical etching
ASTM etchant No. 64b - Pt alloys - Chemical etching
ASTM etchant No. 65 - <90% noble metals - Chemical etching
ASTM etchant No. 65 - <90% noble metals - Chemical etching
ASTM etchant No. 65 - <90% noble metals - Chemical etching
ASTM etchant No. 65 - Ag alloys - Chemical etching
ASTM etchant No. 65 - For noble metals (< 90%)
ASTM etchant No. 66 - For Hf alloys
ASTM etchant No. 66 - Hafnium - Chemical etching
ASTM etchant No. 66 - Niobium - Chemical etching
ASTM etchant No. 66 - Niobium - Chemical etching
ASTM etchant No. 66 - Ta alloys - Chemical etching
ASTM etchant No. 66 - Tantalum - Chemical etching
ASTM etchant No. 66 - Zirconium - Chemical etching
ASTM etchant No. 67 - For Hf base alloys
ASTM etchant No. 67 - Hafnium - Chemical etching
ASTM etchant No. 67 - Pure titanium - Chemical etching
ASTM etchant No. 67 - Pure uranium - Chemical etching
ASTM etchant No. 67 - Ti alloys - Chemical etching
ASTM etchant No. 67 - U alloys - Chemical etching
ASTM etchant No. 67 - Zirconium - Chemical etching
ASTM etchant No. 68 - For Hf base alloys
ASTM etchant No. 68 - Hafnium - Electrolytic etching
ASTM etchant No. 68 - Pure titanium - Electrolytic etching
ASTM etchant No. 68 - Ti alloys - Electrolytic etching
ASTM etchant No. 68 - U + Zr alloys - Electrolytic etching
ASTM etchant No. 68 - Zirconium - Electrolytic etching
ASTM etchant No. 69 - For Hf base alloys
ASTM etchant No. 69 - For Hf base alloys
ASTM etchant No. 69 - Hafnium - Electrolytic etching
ASTM etchant No. 69 - Pure titanium - Electrolytic etching
ASTM etchant No. 69 - Pure uranium - Electrolytic etching
ASTM etchant No. 69 - Ti alloys - Electrolytic etching
ASTM etchant No. 69 - U alloys - Electrolytic etching
ASTM etchant No. 69 - Zirconium - Electrolytic etching
ASTM etchant No. 7 - Aluminum 1000 series - Chemical etching
ASTM etchant No. 7 - Aluminum 2000 series - Chemical etching
ASTM etchant No. 7 - Aluminum 3000 series - Chemical etching
ASTM etchant No. 7 - Aluminum 6000 series - Chemical etching
ASTM etchant No. 7 - For Al base alloys
ASTM etchant No. 70 - For Hf base alloys
ASTM etchant No. 70 - Hafnium - Chemical etching
ASTM etchant No. 71 - For Hf base alloys
ASTM etchant No. 71 - Hafnium - Chemical etching
ASTM etchant No. 71 - Zirconium - Chemical etching
ASTM etchant No. 72 - For Hf base alloys
ASTM etchant No. 73 - For Ir base alloys
ASTM etchant No. 73a - Pt alloys - Electrolytic etching
ASTM etchant No. 73a - Pure platinum - Electrolytic etching
ASTM etchant No. 73b - Ruthenium - Electrolytic etching
ASTM etchant No. 73b - Ruthenium - Electrolytic etching
ASTM etchant No. 73c - Iridium - Electrolytic etching
ASTM etchant No. 74 - Nital - For steels
ASTM etchant No. 74a - Fe + C - Chemical etching
ASTM etchant No. 74a - Fe + C - Chemical etching
ASTM etchant No. 74a - Mg-Al, Mg-Al-Zn (Al + Zn <5% - Chemical etching
ASTM etchant No. 74a - Mg-Al, Mg-Al-Zn (Al + Zn >5% - Chemical etching
ASTM etchant No. 74a - Mg-Mn alloys - Chemical etching
ASTM etchant No. 74a - Mg-Th-Zr alloys - Chemical etching
ASTM etchant No. 74a - Mg-Zn-Zr alloys - Chemical etching
ASTM etchant No. 74a - Pure iron - Chemical etching
ASTM etchant No. 74a - Pure magnesium - Chemical etching
ASTM etchant No. 74a - Tool steels - Chemical etching
ASTM etchant No. 74a - Zn-Fe alloys - Chemical etching
ASTM etchant No. 74b - Pb + <2 Sb - Chemical etching
ASTM etchant No. 74b - Pb + >2 Sb - Chemical etching
ASTM etchant No. 74b - Pb Babbitt - Chemical etching
ASTM etchant No. 74b - Sn-Pb alloys - Chemical etching
ASTM etchant No. 74d - Pure tin - Chemical etching
ASTM etchant No. 74d - Sn-Cd alloys - Chemical etching
ASTM etchant No. 74d - Sn-Fe alloys - Chemical etching
ASTM etchant No. 74e - Ni-Fe alloys - Chemical etching
ASTM etchant No. 74e - Ni-Mn alloys - Chemical etching
ASTM etchant No. 75 - Gorsuch's etchant - Iron
ASTM etchant No. 75 - Pure iron - Chemical etching
ASTM etchant No. 76 - Fe + C - Chemical etching
ASTM etchant No. 76 - Picral - Fe + C
ASTM etchant No. 77 - Fe + C - Chemical etching
ASTM etchant No. 77 - Fe + C - Chemical etching
ASTM etchant No. 77 - Super picral - Fe + C
ASTM etchant No. 78 - Fe + <1C + <4% additions
ASTM etchant No. 78 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 78 - Fe + 1C + <4% additions - Chemical etching
ASTM etchant No. 78 - Fe + C - Chemical etching
ASTM etchant No. 79 - Fe + C - Chemical etching
ASTM etchant No. 79 - Fry's etchant - Fe + C
ASTM etchant No. 8 - For Al-Cu, Al-Mg, Al-Si, Cu
ASTM etchant No. 80 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 80 - Fe + 12-20 Cr + 4-10 Ni + <7% - Chemical etching
ASTM etchant No. 80 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 80 - Tool steels - Chemical etching
ASTM etchant No. 80 - Vilella - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 81 - Fe + <1C + <4% additions
ASTM etchant No. 81 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 81 - Steels, carbon and alloy types - Chemical etching
ASTM etchant No. 82 - Acid ferric chloride - Fe + <1C + <4% additions
ASTM etchant No. 82 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 83 - Fe + <1C + <4% additions
ASTM etchant No. 83 - Fe + <1C + <4% additions - Electrolytic etching
ASTM etchant No. 83 - Ni-Cr alloys - Electrolytic etching
ASTM etchant No. 83 - Ni-Fe alloys - Electrolytic etching
ASTM etchant No. 83a - Fe + 15-30 Cr + 6-40 Ni + <5% - Electrolytic etching
ASTM etchant No. 83b - Non-stainless maraging steels - Electrolytic etching
ASTM etchant No. 84 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 84 - Howarth's etchant - Fe + <1C + <4% additions
ASTM etchant No. 85 - Alkaline sodium picrate - Fe + <1C + <4% additions
ASTM etchant No. 85 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 86 - Fe + <1C + <4% additions - Chemical etching
ASTM etchant No. 86 - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 86 - Fe + 12-20 Cr + 4-10 Ni + <7% - Chemical etching
ASTM etchant No. 86 - Fe + 16-25 Cr + 3-6 Ni + 5-1C - Chemical etching
ASTM etchant No. 86 - High temperature steel - Chemical etching
ASTM etchant No. 86 - Non-stainless maraging steels - Chemical etching
ASTM etchant No. 86 - Tool steels - Chemical etching
ASTM etchant No. 87 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 87 - Glyceregia - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 88 - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 88 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 89 - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 89 - Fe + 12-20 Cr + 4-10 Ni + <7% - Chemical etching
ASTM etchant No. 89 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 89 - High temperature steels - Chemical etching
ASTM etchant No. 89 - Ni-Al alloys - Chemical etching
ASTM etchant No. 89 - Non-stainless maraging steels - Chemical etching
ASTM etchant No. 8a - Aluminum 2000 series - Chemical etching
ASTM etchant No. 8a - Aluminum 3000 series - Chemical etching
ASTM etchant No. 8a - Aluminum 5000 series - Chemical etching
ASTM etchant No. 8a - Aluminum 6000 series - Chemical etching
ASTM etchant No. 8a - Aluminum 6000 series - Chemical etching
ASTM etchant No. 8b - Admiralty metal - Electrolytic etching
ASTM etchant No. 8b - Pure copper - Electrolytic etching
ASTM etchant No. 9 - Beryllium - Chemical etching
ASTM etchant No. 9 - For Be
ASTM etchant No. 9 - Pure cobalt - Chemical etching
ASTM etchant No. 90 - HNO3-HF in glycerol - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 91 - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 91 - Fe + 12-20 Cr + 4-10 Ni + <7% - Chemical etching
ASTM etchant No. 91 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 92
ASTM etchant No. 93
ASTM etchant No. 94 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 94 - Kalling's etchant No. 2 - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 94 - Ni superalloys - Chemical etching
ASTM etchant No. 95 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 95 - Kalling's etchant No. 1 - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 96 - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 96 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 97 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 97 - High temperature steels - Chemical etching
ASTM etchant No. 97 - Potassium hydroxide - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 98 - Fe + 15-30 Cr + 6-40 Ni + <5% - Chemical etching
ASTM etchant No. 98 - Murakami's etchant - Fe + 15-30 Cr + 6-40 Ni + <5%
ASTM etchant No. 98 - Ni-Cr alloys - Chemical etching
ASTM etchant No. 98c - Molybdenum - Chemical etching
ASTM etchant No. 98c - Pure tungsten - Chemical etching
ASTM etchant No. 98c - Rhenium - Chemical etching
ASTM etchant No. 99 - Beraha's etchant - Fe + 12-20 Cr + 4-10 Ni + <7%
ASTM etchant No. 99 - Fe + 12-20 Cr + 4-10 Ni + <7% - Chemical etching
ASTM etchant No. 99 - Fe + 16-25 Cr + 3-6 Ni + 5-1C - Chemical etching
ASTM etchant No. 99 - Non-stainless maraging steels - Chemical etching
ASTM etchant No.57 - Pb + >2 Sb - Chemical etching
AW-6061 aluminium matrix composite alloy - Dislocation etching
Abraham's AB etchant - - Gallium arsenide
Accary etchant - U-C alloys - Electrolytic etching
Accary etchant - Uranium - Chemical etching
Accary etchant - Uranium - For etching U carbide
Acetic glycol etchant - Magnesium - Chemical etching
Acetic glycol etchant - Rare earth - Chemical etching
Acetic-glycol etchant - Mg and alloys - Chemical etching
Acetic-picral etchant - Magnesium - Chemical etching
Acetic-picral etchant - Magnesium - Chemical etching
Acetic-picral etchant - Magnesium - Chemical etching
Acrylonitrile-butadiene-styrene - Chemical etching
Adcock etchant - Lead - Electrolytic etching
Adcock etchant - Pb-Sb alloys - Electrolytic etching
Adler's etchant - Stainless steel - Chemical etching
Adler's etchant - Co and Co-Al alloys - Chemical etching
Adler's etchant - For the investigation of the cast structure and the heat-affected zone in welds in steels
Adler's etchant - High-alloy, corrosion-resistant steels, Co and Ni alloys
Adler's etchant - Ni brazing alloys when brazed to steels - Galvanic Ni coatings - Chemical etching
Adler's etchant - Pd-Ga alloy (Pd5Ga2) - Chemical etching
Adler's etchant - Stainless steel
Adler's etchant - Stainless steel
Adler's etchant - Steel for turbine blades - Chemical etching
Ag (001) wafers - Chemical polishing
Ag (001) wafers - Dislocation etching
Ag (001) wafers - Electrolytic sawing
Ag (111) and (100) wafers - Chemical polishing
Ag (111) wafers, Ag natural crystals, Ag native single crystals
Ag 100 a thick thin film - Chemical etching
Ag alloys - Chemical etching
Ag alloys - Chemical etching
Ag alloys - Chemical etching
Ag alloys - Chemical etching
Ag alloys - Electrolytic etching
Ag as high purity pre-forms and silver alloy pre-forms - Chemical cleaning
Ag high purity pre-forms and plated parts
Ag pellets in an expoxy matrix - Chemical etching
Ag pellets in an expoxy matrix - Chemical etching
Ag single crystal specimens - Electrolytic polishing
Ag single crystal sphere - Gas etching
Ag single crystal sphere - Thermal forming
Ag single crystals - Chemical etching
Ag solders - Chemical etching
Ag specimen blanks - Chemical etching
Ag specimen blanks - Chemical etching
Ag specimens - Chemical polishing
Ag specimens - Electrolytic polishing
Ag specimens - Gas corrosion
Ag specimens - Gas oxidation
Ag specimens used in a thermal etching study - Electrolytic polishing
Ag specimens used in a thermal etching study - Gas etching
Ag thin film coatings on Si, Al2O3 and ZrO2 substrates - Chemical etching
Ag thin film deposits - Chemical cleaning/etching
Ag thin films - Chemical etching
Ag thin films - Chemical etching
Ag thin films - Chemical etching
Ag thin films electroplated on brass - Chemical etching
Ag, Ag solders and Pg-Pd alloys - Chemical etching
Ag-Al alloy - Alloy with < 20 wt.% Ag
Ag-Al alloy - Alloy with 15% Ag
Ag-Al alloy - Alloy with 20 wt.% Ag
Ag-Al alloy - Alloys with < 27 at.% Al
Ag-Al alloy - Chemical etching
Ag-Al alloy - Electrolytic thinning
Ag-Al alloy - Electrolytic thinning
Ag-Al alloy - Electrolytic thinning
Ag-Al alloys - Electrolytic polishing
Ag-Au evaporated thin films - Chemical etching
Ag-Au single crystal alloy ingots - Chemical etching
Ag-B system
Ag-Cd alloy - Alloy with 44% Cd
Ag-Cd alloy - Alloy with 45 at.% Cd
Ag-Cd alloy - Alloy with 45 at.% Cd
Ag-Cd alloy - Alloy with 45 at.% Cd
Ag-Cd alloy - Alloy with 70% Ag and 30% Cd
Ag-Cd alloy - Alloys with 1-7% Cd
Ag-Cd alloy - Beta Ag Cd-50 at.% Cd
Ag-Cd alloy - Electrolytic thinning
Ag-Cd single crystal - 0.8 at.% Cd - Chemical thinning
Ag-Cd-Zn alloys - Electrolytic polishing
Ag-Cu alloy - In heterogeneius alloys attacks Cu rich areas faster then Ag rich
Ag-Cu alloys - Chemical etching
Ag-Cu-Ge system - Chemical ecthing
Ag-Cu-Ge-Sb system - Chemical etching
Ag-Cu-Sb system - Chemical etching
Ag-Epoxy - Chemical etching
Ag-Epoxy - Gas cleaning
Ag-Ga-S allloy - Chemical etching
Ag-Ge alloy - Alloy with 21 at.% Ge
Ag-Ge eutectic - Chemical polishing
Ag-I alloy - Electrolytic thinning
Ag-I alloys - Chemical etching
Ag-I system - Beta-AgI single crystal
Ag-In selenide - Chemical ecthing
Ag-In telluride - Chemical etching
Ag-Mg alloy - Ag-0.1% MgO
Ag-Mg alloy - Electrolytic machinning
Ag-Mg single crystal - 0.8 at.% Mg
Ag-Mo and Ag-W alloys, Ag-WC - Chemical etching
Ag-Nd system - Chemical etching
Ag-Ni and Ag-Mg-Ni alloys - Chemical etching
Ag-Ni, Ag-Mg-Ni, Ag-Sn alloys - Chemical etching
Ag-Pb-Te system - No etching required
Ag-Pr system - Chemical etching
Ag-Sb alloys - Electrolytic polishing
Ag-Sn (1%) single crystal alloys - Electrolytic polishing
Ag-Sn alloy - Ag3Sn-Sn section
Ag-Sn alloy - Alloys with 1-8 at.% Sn
Ag-Sn alloys - Electrolytic polishing
Ag-Sn alloys
Ag-Sn and Ag-Pb-Sn alloys - Chemical etching
Ag-Sn-Hg alloys (hardened) - Chemical etching
Ag-Sn-Hg alloys - Attack polishing
Ag-Sn-Zn-Cu alloys - Chemical etching
Ag-Th alloys - Chemical etching
Ag-Th alloys - Chemical etching
Ag-Zn alloy - Alloy with 38 at.% Zn
Ag-Zn alloy - Alloy with 38% Zn
Ag-Zn alloy - Alloy with 50 wt.% Ag and 50 wt.% Zn
Ag-Zn alloy - Electrolytic thinning
Ag-Zn alloy - Electrolytic thinning
Ag-Zn alloy specimens - Chemical etching
Ag-Zn alloys - Chemical polishing
Ag2Al (0001) wafers - Dislocation etching
Ag2Al (0001) wafers - Dislocation etching
Ag2Al single crystal specimens - Electrolytic polishing
Ag2Al single crystal sphere - Chemical polishing
Ag2Hg (110) single crystal - Chemical polishing/etching
Ag2Se (100) wafers - Chemical polishing
Ag2Se (100) wafers and other orientations - Chemical polishing
Ag2Se (100) wafers and other orientations - Chemical polishing
Ag2Te (100) wafers - Chemical polishing
Ag3Ni specimens - Electrolytic polishing
Ag6Ge10P12 single crystal ingots - Chemical etching
AgB alloys - Chemical cleaning
AgBr (100) and (111) wafers - Dislocation etching
AgBr (110) wafers - Abrasive polishing
AgBr, AgCl - Dislocation etching
AgCd single crystal specimens - Chemical etching
AgCl (100) bars, AgCl single crystal specimens - Chemical etching
AgCl (100) wafers - Chemical cleaning
AgCl (100) wafers - Chemical cleaning
AgCl (100) wafers - Chemical polishing
AgCl single crystal oriented bars - Chemical cleaning
AgCl specimens - Pressure, thinning
AgFeTe2 single crystal specimens - Chemical polishing
AgGaS2 thin films
AgGaSe3 single crystals - Chemical etching
AgGaTe2 single crystals - Chemical etching
AgI powder
AgI single crystals - Chemical cleaning
AgInSe2 single crystals - Chemical etching
AgInTe2 single crystals - Chemical etching
AgMg single crystal specimens - Chemical cleaning
AgS single crystal whiskers - Chemical etching
AgS single crystal whiskers - Electrolytic polishing
AgSbTe2 single crystal specimens - Chemical etching
AgSbTe2 single crystal specimens - Chemical polishing
AgSbTe2 single crystal specimens - Dislocation etching
AgTiSe single crystal material - Chemical polishing
AgZn specimens - Chemical cleaning
Age-hardenable stainless steels - Electrolytic etching
Agua Regia - Au thin films and specimens - Chemical etching
Agua Regia - AuSn (20%) alloy as an evaporated thin film - Chemical etching
Agua Regia - Cr and Cr alloys - Chemical etching
Agua Regia - Ir crystalline specimens as wire, rod, sheet - Chemical etching
Agua Regia - Ir thin films deposited on silicon (100), n-type - Chemical etching
Agua Regia - IrPt as alloy mixtures - Chemical etching
Agua Regia - IrV and Ir80V20 thin films - Chemical etching
Agua Regia - Mo specimens - Chemical polishing
Agua Regia - Ni superalloys, Ni-Cr alloys - Chemical etching
Agua Regia - Ni-Cr thin films evaporated on (111) and (100) oriented Si - Chemical etching
Agua Regia - Pd-H as powdered "Palladium Black" with absorbed hydrogen
Agua Regia - PdAg alloy - Chemical etching
Agua Regia - PdNiP, PtNiP, and PtCuP metallic glasses - Chemical etching
Agua Regia - Pt and Au evaporated on silicon (111) - Chemical etching
Agua Regia - PtRh (2-15%) as thermocouple wires - Chemical cleaning
Agua Regia - Pure Au, Au-Pt and Au-Ag alloys with more than 80% Au - Chemical etching
Agua Regia - Rare earth nickelides - Chemical etching
Agua Regia - Si (111) and (100) wafers - Chemical cleaning
Agua Regia - Si3N4, oxynitrides, SiO2 as thin films or glass and quartzware - Chemical cleaning
Agua Regia - SiO2 as single crystal natural quartz, artificial quartz, and vitreous silica (fused glass)
Agua Regia - Sn (100) single crystal - Chemical etching
Agua Regia - SnGe (1%) thin films - Chemical etching
Agua Regia - Te (10T0) cleaved wafers - Chemical polishing/etching
Agua Regia - Th specimen - Chemical polishing
Agua Regia - Ti0.3W0.7Si2 thin films - Chemical polishing
Agua Regia - Ti3W7Si2 thin films on silicon wafers, (111), (110) and (100) - Chemical etching
Agua Regia - TiO2 single crystal natural rutile crystals - Chemical cleaning
Agua Regia - TiW (1% Ti) thin films - Chemical etching
Agua Regia - TlBiTe2 single crystal n-type - Chemical polishing/etching
Agua Regia - V specimens - Chemical ething
Agua Regia - W specimens - Chemical etching
Agua Regia - Zr specimens - Chemical etching
Agua Regia - a-Zr2Pd thin films - Chemical polishing/etching
Agua Regia - a-Zr3Rh amorphous thin films - Chemical polishing/etching
Agua Regia, dilute - Pd thin films - Chemical cleaning
Agua Regia, modified - Ni specimens - Chemical etching
Al (001) wafers - Al (001) wafers and other orientations
Al (001) wafers - Al, (001) wafers used in a study of lithium precipitation along dislocations
Al (001) wafers - Dislocation etching
Al (100) specimen - Al (100) and other orientations used in a study of thermal etching
Al (100) specimens - Electrolytic polishing
Al (100) wafer-Al, (100) wafer surfaces preferentially etched in this solution
Al (100) wafers - Thermal etching
Al (100) wafers used in an oxidation study - Electrolytic polishing
Al 5083 alloy - Al-4Mg-0.3Fe-0.75Mn-0.2Si
Al 5454 alloy - Al-2.6Mg-0.3Fe-0.8Mn-0.1Si
Al alloy #6061 - Tg sheet-Proton damage
Al alloy 1100-Al-0.5Fe-0.1Si
Al alloy 3003 - Al-1Mn-0.6Fe-0.2Si - Electrolytic polishing
Al alloy 7004 - Al-1.6Mg-4.5Zn-0.5Mn-0.2Fe-0.2Si
Al alloys as sheet, plate and rod - Electrolytic etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Chemical etching
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys - Electrolytic polishing
Al and Al alloys with less than 2% Si - Electrolytic polishing
Al and Al alloys, Al-Cu alloys, Al-Zn alloys - Chemical etching
Al and Al-Si and Al-Cu alloys - Chemical etching
Al and Ti nitride - Chemical etching
Al and alloy - Al, specimens and alloys with low aluminum content
Al and alloy - Polishing
Al and alloys - Chemical polishing
Al and aluminum alloy - Used as a general cleaning and polishing etch
Al bronze - Chemical etching
Al bronze - Chemical etching
Al bronze - Chemical etching
Al bronzes - Chemical etching
Al bronzes, Cu-Be alloys - Electrolytic etching
Al cast alloys - Chemical etching
Al cold-rolled specimens - Electrolytic polishing
Al evaporated on KCl - Al, evaporated on KCl, (100) and (111) cleaved substrates as oriented thin films
Al foil - Al, foil used in a study of change with AC etching
Al foil with an Al2O3 thin Film
Al high purity slugs - Chemical cleaning
Al material in growing AlGaAsP single crystals - Chemical cleaning
Al polycrystalline sheet - Chemical cleaning
Al single crystal specimen - Physical etching
Al single crystal specimens - Electrolytic polishing
Al single crystal specimens - Electrolytic polishing
Al single crystal specimens - Electrolytic polishing
Al single crystal sphere - Gas oxidation
Al single crystal wafers - Electrolytic thinning
Al specimens - Chem/mech machinning
Al specimens - Chemical etching
Al specimens - Chemical etching
Al specimens - Mechanical, deformation
Al specimens - Oxidation
Al specimens - Solution used as a preferential etch on aluminum
Al specimens - Solution will develop etch figures
Al specimens and alloy - Abrasive polishing
Al specimens as Al-Si (20%) - Electrolytic etching
Al specimens cutting - Acid, cutting
Al thin film - Ketone, lift-off
Al thin film on (100) silicon wafers - Chemical etching
Al thin film on quartz substrate - Gas, removal
Al thin films and crystalline aluminum sheet - Solution shown was used to etch channels in the aluminum
Al thin films deposited on GaAs - Physical etching
Al thin films deposited on silicon substrates - Physical etching
Al thin films evaporated on SiO2, Al2O3, and ZrO2 substrates - Alkali, removal
Al, Al-Si alloys - Electrolytic polishing
Al, and A12O3/A1N thin films - Gas etching
Al-Ag alloys - Chemical polishing
Al-Ag alloys - Electrolytic polishing
Al-Ag alloys - Electrolytic thining
Al-Ag polycrystalline and single crystal ingots - Chemical etching
Al-Ag polycrystalline and single crystal ingots - Chemical etching
Al-Au (2%) specimens - Electrolytic etching
Al-Au alloy - Al-Al2Au eutectic
Al-Au alloy - Chemical etching
Al-Au alloys - Electrolytic polishing
Al-Be (38%) alloy - Chemical cleaning
Al-Be (38%) polycrystaline wire - Chemical cleaning
Al-Be alloy - Alloys with < 0.1% Be
Al-Be alloy - Electrolytic thinning by Mirand-Saulnier technique
Al-Ca alloy - Al-7.6Ca eutectic alloy
Al-Ca alloy - Al4Ca
Al-Cd alloy - Alloys with 0.5-1.0% Al
Al-Co alloys - Electrolytic polishing and etching
Al-Cr alloy - Electrolytic thinning by Mirand-Saulnier technique
Al-Cr-Mo-Ni-Ti alloy - Ni-4/13Al-6.5/20.5Cr-0.25/4.75Ti-<6Mo (in at.%)
Al-Cr-Nb-Ni alloy - Ni-20Nb-6Cr-2.5Al
Al-Cu alloy (4% Cu) - Electrolytic polishing and thinning
Al-Cu alloy - Al-Al2Cu eutectic
Al-Cu alloy - Al-Cu alloy specimens
Al-Cu alloy - Al-Cu eutectic
Al-Cu alloy - Al-CuAl2 eutectic
Al-Cu alloy - Al-CuAl2 eutectic - Electrolytic polishing
Al-Cu alloy - Al-CuAl2 eutectic
Al-Cu alloy - Al-CuAl2 eutectic - Electrolytic thinning
Al-Cu alloy - Alloy with 0.34 wt.% Cu
Al-Cu alloy - Alloy with 11.8 wt.% Al
Al-Cu alloy - Alloy with 12% Al
Al-Cu alloy - Alloy with 2-5% Cu
Al-Cu alloy - Alloy with 3-5% Cu - Electrolytic polishing
Al-Cu alloy - Alloy with 36 wt.% Cu
Al-Cu alloy - Alloy with 4 wt.% Cu
Al-Cu alloy - Alloy with 4.5 wt.% Cu
Al-Cu alloy - Alloy with 9.5% Al
Al-Cu alloy - Alloys with 10-45% Cu
Al-Cu alloy - Electrolytic thinning
Al-Cu alloy - Electrolytic thinning
Al-Cu alloy - Electrolytic thinning
Al-Cu alloy - Electrolytic thinning
Al-Cu alloy - Electrolytic thinning
Al-Cu alloy - Electrolytic thinning by PFTE holder technique
Al-Cu alloy - Eletrolytic thinning
Al-Cu alloys - Chemical etching
Al-Cu alloys - Chemical polishing
Al-Cu alloys - Chemical polishing
Al-Cu alloys - Electrolytic polishing
Al-Cu single crystal - Chemical etching
Al-Cu single crystal - Chemical etching
Al-Cu single crystal - Chemical etching
Al-Cu-Mg alloy - Electrolytic thinning
Al-Cu-Mg alloys - Electrolytic polishing
Al-Cu-Mg eutectic alloy - Electrolytic thinning and chemical etching
Al-Cu-Mg-Ag alloy - Foil preparation for TEM
Al-Cu-Mg-Mn alloy - 3-4% Cu, 0.5-1% Mg, 0.5% Mn
Al-Cu-Mg-Mn-Fe-Si alloy - 2124 T4, Al-3.8Cr-1.3Mg-0.5Mn-0.1Fe-0.05Si
Al-Cu-Mn alloy - Cu(2+x) Mn(1-x) Al, x=0.6-0.8
Al-Cu-Mn alloy - Cu2MnAl - Chemical thinning and electrolytic thinning
Al-Cu-Mn system - Approx. Cu2MnAl
Al-Cu-Mn-Zn-Fe-Mg-Si alloy - 2024-T4 Al-4.5Cu-1.4Mg-0.6Mn-0.3Fe-0.2Zn-0.15Si
Al-Dy alloy - Al rich alloys
Al-Fe alloy - Alloys with 5-10% Al - Electrolytic thinning
Al-Fe alloy - Alloys with 65-90% Fe
Al-Fe-Cr alloy - Al-7Fe-0.5/1.5 Cr - Electrolytic thinning
Al-Fe-Cr-Ti-V-Zr alloy - Al-7Fe-1Cr-0.2Ti-0.2V-0.2Zr
Al-Fe-Ni system - Alloys with 32-53% Al, 8-14% Ni, 19-60% Fe
Al-Ge alloy - Alloy with 50 wt.% Ge
Al-Ge alloy - Eutectic composition
Al-Ge alloys - Chemical polishing
Al-Hf alloy - Alloy with 1.8 wt.% Hf
Al-Ho alloy - Anodising
Al-Ho alloy - For Al rich alloys
Al-In alloy - Selective etch for SEM
Al-In alloys - Chemical polishing
Al-Li alloy (0.4% Li) - Chemical etching
Al-Li alloy - Chemical polishing
Al-Li-Cu-Zr alloy - Al-3Li-2Cu-0.2Zr
Al-Li-Cu-Zr-Cd alloy - Al-3Li-2Cu-0.2Zr-0.2Cd
Al-Mg alloy - Al-5/10Mg
Al-Mg alloy - Al-8Mg alloy
Al-Mg alloy - Alloy with 1-8 at.% Mg
Al-Mg alloy - Alloy with 7% Mg
Al-Mg alloy - Alloy with 86% Mg
Al-Mg alloy - Alloys with 1-4.5% Mg
Al-Mg alloy - Chemical polishing
Al-Mg alloy - Electrolytic thinning
Al-Mg alloy - Electrolytic thinning
Al-Mg alloy - Electrolytic thinning by Mirand-Saulnier technique
Al-Mg alloys - Chemical etching
Al-Mg alloys - Chemical etching
Al-Mg alloys - Chemical etching
Al-Mg alloys - Chemical etching
Al-Mg alloys - Electrolytic polishing
Al-Mg, Al-Mg-Si, Al-Zn-Mg, Al-Cu-Mg alloys - Chemical polishing
Al-Mg-Mo-O system - Chemical etching
Al-Mg-Si alloy - Al-1-2% Mg2Si
Al-Mg-Si alloy - Alloy 6063 Al-0.7Mg-0.4Si
Al-Mg-Si alloy - Electrolytic thinning
Al-Mg-Zn alloy - Al-2.6Mg-6.3Zn
Al-Mg-Zn alloy - Electrolytic thinning by PTFE holder technique
Al-Mn alloy - Al-1 wt.% Mn - Electrolytic polishing
Al-Mn alloy - Al45Mn55 - Electrolytic polishing
Al-Mn alloy - Alloy with 1-4% Mn
Al-Mn alloy - Electrolytic thinning by Mirand-Saulnier technique
Al-Mn-C alloy - Al43 x Mn55 x C2
Al-Mo-O system - Al2O3-< 5% Mo
Al-Ni alloy - Al-Al3Ni eutectic
Al-Ni alloy - Ni3Al - Electrolytic thinning
Al-Ni alloy thin film - Chemical etching
Al-Ni alloy thin films - Flux etching and cleaning
Al-Ni system - Beta 2 alloys 45-55% Ni
Al-Ni, alloy thin film coatings - Etching
Al-Pt alloy - Al-Al2Pt5 eutectic
Al-Pt alloys - Grain size can be determined by polarised light
Al-Sb alloy - Al-AlSb eutectic
Al-Sb alloys - Chemical etching
Al-Si (12%) alloy - Chemical etching
Al-Si (5%) foil - Chemical cleaning
Al-Si alloy - Al, Al-Si alloys, Fe-Si alloys
Al-Si alloy - Chemical etching
Al-Si alloy - Chemical etching
Al-Si alloy - Particullary good for Al-Si alloys
Al-Si alloys - Electrolytic polishing
Al-Si alloys - For Al-Si alloys with Si bellow of 34 weight %
Al-Si and Al-Cu alloys, segregations, grain boundaries - Chemical etching
Al-Si specimens - Chemical polishing and etching
Al-Si-Cu foundary alloys, Color etchants - Chemical etching
Al-Si-Ni eutectic - Al-11Si-4.9Ni
Al-Sm alloys - Al rich alloys
Al-Ti alloy specimen - Al-Al3Ti section
Al-Ti-N system - (Al, Ti)N
Al-Ti-Zr-Sn-Mo alloy - Ti-6Al-2Sn-4Zr-2Mo
Al-Ti-Zr-Sn-Mo alloy - Ti-6Al-2Sn-4Zr-2Mo - Williams-Blackburn' electrolyte
Al-Tm alloys - Electrolytic polishing
Al-Tm alloys - Etchant for alloy with 0-40% Tm
Al-U alloys - Chemical etching
Al-U alloys - Electrolytic thinning
Al-Zn (10%) alloy sheet - Electrolytic polishing
Al-Zn alloy - Alloy with 22% Al
Al-Zn alloy - Electrolytic polishing
Al-Zn alloy - Electrolytic polishing
Al-Zn alloy - Electrolytic thinning
Al-Zn alloy - For alloy with 38 at.% Zn
Al-Zn alloy - For alloys with 20% Al
Al-Zn alloy - For alloys with 21.5% Zn
Al-Zn alloy - For alloys with 25 at.% Zn
Al-Zn alloy - For alloys with 29 at.% Zn
Al-Zn alloys - Alloys with more then 8% Zn
Al-Zn alloys - Chemical etching
Al-Zn alloys - Electrolytic thinning
Al-Zn alloys - Electrolytic thinning
Al-Zn alloys - For alloys with < 20% Zn
Al-Zn alloys - For alloys with 6.5 at.% Zn
Al-Zn, Cu alloy specimens - Physical etching
Al-Zn-Mg alloy - 7039 alloy 4% Zn, 2.8-3% Mg
Al-Zn-Mg alloy - Al, 53% Zn, 1.7% Mg (+0.04% Ti)
Al-Zn-Mg alloy - Alloy with 5.3% Zn, 2.5% Mg
Al-Zn-Mg alloy - Alloy with 6% Zn and 2% Mg
Al-Zn-Mg alloy - Alloy with 6.86% Zn, 2.30% Mg
Al-Zn-Mg alloy - Alloys with 4-6% Zn, 1-4% Mg
Al-Zn-Mg alloy - Electrolytic thinning
Al-Zn-Mg-Cu alloy - 7075 alloy - Electrolytic polishing
Al-Zn-Mg-Cu alloy - 7075 alloy 5.5-5.8% Zn, 2.1-2.6% Mg, 1.6-1.7% Cu
Al-Zn-Mg-Cu alloy - Al-5.5Zn-2.5Mg-1.5Cu
Al-Zn-Mg-Cu alloy - Al-5/7Zn-2/3Mg-1/3Cu
Al-Zn-Mg-Cu alloys - Chemical etching
Al-Zn-Mn alloy - Alloy with 5% Zn, 2% Mg
Al-Zr alloy - For alloy with 0.8% Zr - Al-Zr alloy
Al-killed drawing steel - Fe-0.07C-0.3Mn-0.03/0.05Al
Al/Ni specimen surface coatings - Electrolytic removal
Al203 as (0001) or (01T2) sapphire blanks - Thermal cleaning
Al2NiO4 specimens - Chemical etching
Al2O3 (0001) wafers - Chemical cleaning
Al2O3 (0001) wafers - Chemical etching
Al2O3 (0001) wafers - Metal etching
Al2O3 (0O01) natural corundum - Etching
Al2O3 (ruby and sapphire) - Dislocation etching
Al2O3 - Chemical etching
Al2O3 - Chemical etching
Al2O3 - Chemical etching
Al2O3 - Chemical etching
Al2O3 - Chemical etching
Al2O3 - Dislocation etching
Al2O3 - Dislocation etching
Al2O3 and Al2PxOy thin films - Solvent, cleaning
Al2O3 anodized coating - Chemical cleaning
Al2O3 as fused sapphire parts in amorphous form - Chemical cleaning
Al2O3 as natural corundum - Molten flux removal
Al2O3 as natural single crystals - Chemical cleaning
Al2O3 as natural single crystals - Cleaning
Al2O3 clear fused sapphire blanks and (0001) single crystal oriented blanks - Chemical cleaning
Al2O3 clear fused sapphire blanks and (0001) single crystal oriented blanks - Solvent degreasing
Al2O3 clear fused sapphire blanks and (0001) single crystal oriented blanks - Surface treatment
Al2O3 pressed powder - Chemical cleaning
Al2O3 pressed powder - Gas cleaning
Al2O3 pressed powder substrates - Chemical etching
Al2O3 single crystal - Vacuum, cleaning
Al2O3 single crystal sapphire - Dislocation etching
Al2O3 single crystal spheres - Thin film coating
Al2O3 specimens - Chemical cleaning
Al2O3 substrate - Cleaning
Al2O3 substrate blanks - Cleaning
Al2O3 substrate blanks - Gas cleaning
Al2O3 thin film - Chemical etching
Al2O3 thin film - Electrolytic etching
Al2O3 thin film deposition on InGaAsP/InP - Oxide, passivation
Al2O3 thin films DC reactively sputtered on (111) silicon wafers - Chemical etching
Al2O3, CeO2 and Cr2O3 - Physical etching
Al2O3, mixture of Al2O3 and MgO, or SnO2 - Thermal etching
Al2O3, native oxide films on AlAu alloys - Chemical etching - (cleaning)
Al2O3, thin film deposited on silicon - Photochemical, forming
Al2O3-TiC sintered cermets - Chemical etching
Al2O3-Zr (1%) doped single crystal - Physical etching
Al2SiO5 specimens - Chemical etching
Al2TiO5, grain boundary etchant - Chemical etching
AlAs (110) wafers - Gas, oxidation
AlAs thin films - Chemical polishing
AlFe alloy - Thermal etching
AlGaAs (100) wafer - Chemical cleaning
AlN on Si and GaAs substrates - Chemical etching
AlN specimens - Chemical etching
AlN thin film on (100) gallium arsenide - Chemical etching
AlN thin film on (111) silicon wafer - Chemical etching
AlN thin films (100) and (111)-Acid, float-off
AlN thin films - Thermal etching
AlN thin films deposited on GaAs-Zn doped - Chemical etching
AlN-La2O3 - Chemical ecthing
AlNi2 single crystal - Chemical etching
AlP single crystal wafer - Chemical polishing
AlPO4 single crystal - Chemical etching
AlSb (111) wafers - Chemical etching
AlSb - Dislocation etching
AlSb ingot material preparation - Chemical cleaning
AlSb wafers - Chemical etching
AlSb wafers - Chemical polishing
AlSb wafers - Chemical polishing
AlSb wafers - Chemical polishing
AlSb/GaSb wafers - Chemical etching
AlSi (5%) spheres - Gas, cleaning
AlSi thin film layers - Physical etching
AlSi-671, S-816 alloys - Chemical etching
AlSi0671, S-816 alloys - Chemical etching
AlSiCuSn cast alloys - Color etchant
Aldridge's etchant - Chemical etching
Alexander's etchant - Chemical etching
Alkaline sodium picrate etchant - Chemical etching
Alkaline sodium picrate etchant - High carbon steels - Electrolytic etching
Alkaline sodium picrate etchant - Tool steels - Chemical etching
Alkaline sodium picrate etchant - Tool steels - Electrolytic etching
Alkaline sodium picrate etchant - Tool steels - Electrolytic etching
Alkaline sodium picrate etchant - Tool steels - Electrolytic etching
Alkaline sodium picrate etchant - W-Co eutectic alloys - Chemical etching
All Mg alloys in the as cast or heat treated condition, grain-boundary etchant - Chemical etching
All materials - EBSD sample preparation
All materials - EBSD sample preparation
All materials - EBSD sample preparation
All materials - EBSD sample preparation
All materials - EBSD sample preparation
All materials - EBSD sample preparation
Allen's etchant - InSb (111) wafers - Chemical polishing
Alloy 800 - 0.04/0.05C-0.2/0.5Si-0.5/0.6Mn-33/34.5Ni-21.5/22.5Cr-0.2/0.55Ti-0.1/0.2Al-0/0.1Cu
Alloy Al69Nb20Ni11 - Twin jet polishing mehod
Alloy C73 - Chemical etching
Alloy Co67Ta33 - Twin jet micro mehod
Alloy Fe47Ni44Al9 - Twin jet polishing mehod
Alloy Fe67Al24C6 - Twin jet polishing mehod
Alloy K42B - Chemical etching
Alloy MA 6000 - Twin jet polishing mehod
Alloy Ni33Al33Cr34 - Twin jet polishing mehod
Alloy Ni50Al50 - Twin jet polishing mehod
Alloy Ni50Co18Al32 - Twin jet polishing mehod
Alloy Ni74Al25C1 - Twin jet polishing mehod
Alloy Ni76Al17Ti6 - Twin jet polishing mehod
Alloy Ni89Al11 - Twin jet polishing mehod
Alloy NiAl - Electrolytic polishing
Alloy No. 152 - Chemical etching
Alloy No. 25 - Chemical etching
Alloy SRR99 - Twin jet polishing mehod
Alloy Ti42Si38 - Twin jet polishing mehod
Alloy Ti52Al48 - Twin jet polishing mehod
Alloy Ti52Al48 - Twin jet polishing mehod
Alloy Ti52Al48V1 - Twin jet polishing mehod
Alloy Ti83Co12Al5 - Twin jet polishing mehod
Alloy and high speed steels - Universal electrolyte
Alloy steel specimens - Color etching - Colors pearlite and hardened structures of unlloyed steel specimens
Alloy steels - Color etchant
Alloy steels - Color etching - For carbon, alloy and Fe-Mn (5-18% Mn) steels
Alloy steels - Color etching - For carbon, alloy and manganese steels - Colors ferrite grains, carbides and phosphides remain white
Alloy steels - Color etching - For carbon, alloy and tool steels
Alloy steels - Color etching - Colors ferrite grains - Reveals banded structures
Alloy steels - Color etching - Colors the martensite in Fe-C alloys
Alloy steels - Color etching - For Mn, Mn-C, Mn-Cr steels
Alloy steels - Electrolytic polishing
Alloy steels - Electrolytic polishing
Alloy steels - Electrolytic polishing
Alloy steels - Revealing prior austenite grain in alloy steels
Alloy steels with Ni, Co - Chemical etching
Alloy steels with Ni, Co - Chemical etching
Alloyed ferrite steels - Electrolytic polishing - 26NiCrMo(V)14-6 steel
Alloyed ferrite steels - Electrolytic polishing - 26NiCrMo(V)14-6 steel
Alloyed ferrite steels - Electrolytic polishing - 100Cr6 steel
Alloyed ferrite steels - Electrolytic polishing - 10CrMo9-10 steel
Alloyed ferrite steels - Electrolytic polishing - 20CrMoV4-10 steel
Alloyed ferrite steels - Electrolytic polishing - 26NiCrMo(V)14-6 steel
Alloyed ferrite steels - Electrolytic polishing - 26NiCrMo(V)14-6 steel
Alloyed ferrite steels - Electrolytic polishing - 26NiCrMo(V)14-6 steel
Alloyed ferrite steels - Electrolytic polishing - 26NiCrMo(V)14-6 steel
Alloyed ferrite steels - Electrolytic polishing - 8CrMoNiNb9-10 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X12CrMoS-17 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X17CrMoVNb-12-1 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X20CrMoWV12-1 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X22CrMoV12-1 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X40Cr6 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X40Cr6 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X40CrMoV5-1 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X7CrNiAl17-7 steel
Alloyed steels with up to 9% Ni - Electrolytic polishing - X8CrMoTi-17 steel
Alloys of WC and Co - Electrolytic etching
Alloys with < 40 at.% Ni
Alminium gallium arsenide (Al(x) Ga(1-x) As) - Chemical etching
Alminium gallium arsenide (Al(x) Ga(1-x) As) - Chemical etching
Alminium gallium arsenide (Al(x) Ga(1-x) As) - Chemical polishing
Alnico V, iron alloy - Chemical etching
Alpha Ti - Chemical etching
Alpha brass (Cu-Zn) - Electrolytic etching
Alpha brass (Cu-Zn) - Electrolytic polishing
Alpha brass (Cu-Zn) - Physical etching
Alpha brass (Cu-Zn) - Physical etching
Alpha brass (Cu-Zn) single crystal - Electrolytic polishing, electro etching
Alpha brass - Chemical polishing
Alpha brass - Electrolytic etching
Alpha or alpha plus beta brass - Electrolytic polishing
Alpha or beta brass - Electrolytic polishing
Alpha phase in Pb-Bi and Pb-Sb alloys - Chemical etching
Alpha sulphur - Chemical etching
Alpha-Al2O3 (0001) wafers - Chemical etching
Alpha-Al2O3 powder material - Molten, flux, removal
Alpha-Beta brass - Electrolytic etching
Alpha-Beta brass - Potentiostatic etching
Alpha-HgI2 single crystal specimens - Chemical polishing
Alpha-HgI2 single crystal specimens - Chemical polishing
Alpha-Np - Electrolytic etching
Alpha-Pu - Electrolytic etching
Alpha-Pu and alloys - Electrolytic etching
Alpha-SiC (0001) wafers - Dislocation etching
Alpha-SiC (0001) wafers - Gas polishing
Alpha-U specimens - Electrolytic polishing
Alpha-U specimens - Electrolytic cleaning
Alpha-brass [(Cu-Zn) with 29.38% Cu)] - Chemical cleaning
Alpha-brass single crystals - Cutting
Alum, KAl(SO4)2 x 12H2O (111) wafers - Chemical etching
Alum, KAl(SO4)2 x 12H2O single crystals - Dislocation etching
Alumel alloy - 95Ni-1.6Al-1.5Si-1.3Mn-0.3Co
Alumina (Al2O3) - Chemical etching
Alumina (Al2O3) - Chemical etching
Alumina (Al2O3) - Chemical etching
Alumina (Al2O3) - Chemical thinning
Alumina (Al2O3) - Dislocation etch pits
Alumina (Al2O3) - Irregular grain boundary attack
Alumina (Al2O3) - Physical etching
Alumina (Al2O3) - Physical etching
Alumina (Al2O3) - Physical etching
Alumina (Al2O3) - Physical etching and chemical etching
Alumina (Al2O3) - Pure aluminia
Alumina (Al2O3) single crystal - Chemical etching
Alumina (Al2O3) single crystal - Chemical etching
Alumina (Al2O3)-titania (TiO) system - 89% Al2O3, 11% TiO
Alumina (Beta-Al2O3) - Chemical etching
Alumina (Beta-Al2O3) - Physical etching
Alumina Al2O3 - Etching
Alumina dispersed Nichrome - Ni-20% Cr-0.6/1.5% Al2O3 - Electrolytic thinning
Alumina rich spinel single crystal (MgAl2O4) - Chemical etching
Alumina-Al2O3 - Chemical polishing
Alumina-Al2O3 - Chemical polishing
Alumina-Al2O3 with 0.04% Cr - Chemical polishing
Alumina-silica system - 60% Al2O3, 40% SiO2
Alumina-silical-lime-nitride glasses - 20.2-25.3% Si, 8.3-14.3% Al, 3.4-4.3% Cu, 43.5-60.6% O, 2.2-16.8% N
Alumina-silicon-phosphorous trioxide-Yttria glass - 49.2 mol.% Al2O3-38.8% SiO2-9.0% P2O3-9.0% Y2O3
Aluminia-lanthanum oxide dispersed Nichrome - Ni-20Cr-0.04Al2O3-0.04La2O3
Aluminium (99.99%) - Dislocation etching
Aluminium (CP or dilute alloy) - Dislocation etching
Aluminium (CP, SP) - Dislocation etching
Aluminium (CP, SP) - Dislocation etching
Aluminium (CP, UP) - Dislocation etching
Aluminium (UP) - Dislocation etching
Aluminium - A general electrolytic polishing for aluminum
Aluminium - Alumina (Al2O3) alloy - Electrolytic thinning
Aluminium - Alumina (Al2O3) alloy - Electrolytic thinning
Aluminium - Alumina (Al2O3) alloy - Low oxide alloys - Jet electrolytic polishing
Aluminium - Alumina (Al2O3) alloys - Chemical etching
Aluminium - Anodising
Aluminium - Attack polishing
Aluminium - Cathodic etching
Aluminium - Chemical cleaning
Aluminium - Chemical etching
Aluminium - Chemical etching
Aluminium - Chemical etching
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing
Aluminium - Chemical polishing - Only suitable for very thin specimen
Aluminium - Differentiation of intermediate phases in Al with high contents of Cu, Mn, Mg, Fe, Be, Ti, Fe3Al
Aluminium - Distinct grain boundaries in corrosion sensitive alloys
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing
Aluminium - Electrolytic polishing, chemical polishing
Aluminium - Electrolytic thinning
Aluminium - Electrolytic thinning
Aluminium - Electrolytic thinning
Aluminium - Electrolytic thinning
Aluminium - Electrolytic thinning
Aluminium - Especially for Cu-Al alloys (also useful in macroetching)
Aluminium - Etching for dislocations
Aluminium - Etching for etch pits
Aluminium - Etching for etch pits
Aluminium - Etching for etch pits on glide dislocation
Aluminium - Etching for grain size
Aluminium - Etching for grain size
Aluminium - For most of Al and Al alloys, especially those containing Cu
Aluminium - For most types of Al and Al alloys
Aluminium - For most types of Al and Al alloys
Aluminium - Grain boundaries, slip lines in high purity Al
Aluminium - Ion etching
Aluminium - Physical etching
Aluminium - Precipitates of beta Al8Mg5 or Mg2
Aluminium - Precipitates, grain boundaries, Al-Si and Al-Cu alloys
Aluminium - Pure Al, Al-Cu, Al-Mn, Al-Mg, Al-Mg-Si alloys
Aluminium - Pure Al, Al-Mg and Al-Mg-Si alloy - Etch figures
Aluminium - Pure Al, Al-Zn, Al-Mn, Al-Mg-Si, Al-Zn-Mg, Al-Mn-Mg alloys
Aluminium - Pure Al, alloys of Cy-Al, Mg-Si-Al, Mg-Al, and Zn-Al
Aluminium - Universal electrolyte
Aluminium - magnesium oxide (Al2O3 + MgO) - Chemical etching
Aluminium 7075 alloy - Al-5.5Zn-2.5Mg-1.5Cu-0.3Cr
Aluminium alloy 6061 - Al-1Mg-0.6Si-03Cu-03.Fe
Aluminium alloy and cast aluminum - Solution used as a general micro-etch in the study of surface structure
Aluminium alloys - 1xxx series alloys
Aluminium alloys - 1xxx series alloys, all wrought alloys and casting alloys
Aluminium alloys - 2xxx series alloys, Al-Cu or Al-Zn casting alloys
Aluminium alloys - 2xxx, 3xxx series; Al-Cu and Al-Mn casting alloys
Aluminium alloys - 2xxx, 7xxx series; Al-Cu or Al-Zn alloys, hot worked and heat treated alloys
Aluminium alloys - 3xxx, 5xxx series; Al-Mg casting alloys
Aluminium alloys - 7xxx series alloys, Al-Zn casting alloys
Aluminium alloys - Al alloys as sheet material and as an evaporated thin film on other materials
Aluminium alloys - Alloy 6061, 6xxx series alloys, hot worked and heat treated alloys
Aluminium alloys - Alloys 2017, 2024 and artificially aged tempers
Aluminium alloys - Brazing sheet. Examination for cladding thickness
Aluminium alloys - Chemical etching
Aluminium alloys - Colors etching
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - Electrolytic polishing
Aluminium alloys - For examination of grain size and shape, cold working incomplete recrystallization
Aluminium alloys - Grain boundary eutectic formations
Aluminium alloys - Hot worked and heat treated alloys
Aluminium alloys - One of the best electrolyte for universal use
Aluminium and alloys - Chemical polishing
Aluminium and alloys - Cleaning etch
Aluminium and alloys - Electrolytic polishing
Aluminium and alloys - Electrolytic polishing
Aluminium and alloys - Electrolytic thinning
Aluminium and alloys - Electrolytic thinning
Aluminium and alloyss - Chemical etching
Aluminium and aluminium alloys - Al alloys - Forgings and castings
Aluminium and aluminium alloys - Al alloys of all types - Forgings and castings
Aluminium and aluminium alloys - Al-Cu-Mg alloys - Al Alloys of all types
Aluminium and aluminium alloys - Electrolytic polishing
Aluminium and aluminium alloys - Electrolytic polishing
Aluminium and aluminium alloys - Electrolytic polishing
Aluminium and aluminium alloys - Electrolytic polishing
Aluminium and aluminium alloys - Electrolytic polishing
Aluminium and aluminium alloys - Grain size determination and determination orientation
Aluminium and aluminium alloys - Pure aluminium and Al alloys - To reveal grain structure and slip lines
Aluminium bronze - Chemical etching
Aluminium nitride (AlN) - AlN with La2O3
Aluminium nitride (AlN) - AlN with Y2O3
Aluminium nitride (AlN) - Chemical etching
Aluminium nitride (AlN) - Chemical etching
Aluminium nitride (AlN)
Aluminium nitride AlN - Etching
Aluminium oxide (Al2O3) - Chemical etching
Aluminium oxide (Al2O3) - Chemical etching
Aluminium oxide (Al2O3) - Chemical etching
Aluminium oxide (Al2O3) - Chemical etching
Aluminium oxide (Al2O3) - Chemical etching
Aluminium oxide (Al2O3) - Physical etching
Aluminium oxide (Al2O3) - Physical etching
Aluminium oxide - Chemical etching
Aluminium polycrystalline sheet - Chemical cleaning
Aluminium silicate (Al2SiO5) - Physical etching
Aluminium single crystal
Aluminium single crystal - Electrolytic polishing
Aluminium single crystal - Electrolytic polishing
Aluminium single crystal specimens - Chemical polishing
Aluminium single crystal specimens - Chemical polishing
Aluminium thin film - Chemical etching
Aluminium thin film - Cleaning etch
Aluminium thin film - Cleaning etch
Aluminium thin film - Cleaning etch
Aluminium thin film - Reactive ion etching
Aluminium thin films - Chemical cleaning
Aluminium thin films deposited on GaAs and Si (100) wafers - Cleaning etch
Aluminium thin films evaporated on GaAs - Al thin films evaporated on GaAs, (100) substrates used in fabricating GaAs FETs
Aluminium thin films evaporated on silicon and Gallium arsenide - Chemical etching
Aluminium thin films on semiconductor wafers - Cleaning etch
Aluminium-magnesium oxide (Al2O3 + MgO) - Chemical etching
Aluminum alloys - Color etching - Coloring of the matrix grains
Aluminum alloys - Color etching - Colors CuAl2 and Mg2Si phases
Aluminum alloys - Color etching - Colors phases
Aluminum alloys - Color etching
Aluminum alloys - Color etching
Aluminum alloys - Color etching
Aluminum alloys - Color etching - Intergranular corrosion
Aluminum antimonide (AlSb) - Chemical polishing
Aluminum antimonide (AlSb) - Chemical polishing
Aluminum etchant type A - VLSI - Chemical etching
Aluminum, brass - EBSD sample preparation
Am2O3 - Chemical etching
AmO(2-x), AmO(2-x) with Am2O3 - Chemical etching
Amberg's etchant - High speed steels - Chemical etching
Amberg's etchant - Martensitic stainless steels - Chemical etching
Ambler and Slattery's etchant - UO2 - Chemical etching
Ambler and Slattery's etchant - Uranium - Electrolytic etching
Ambler's etchant - Zr3Al alloys - Chemical etching
Ambler's etchant - Zr3Al-based alloys - Chemical etching
Amine Gallate etching of silicon wafers I - Chemical etching
Ammonium persulphate etchant - Steels - Chemical etching
Amyl nital - Iron and steels - Chemical etching
Amyl nital etchant - Steels - etching
Anderson's etchant - For etching pure Mn and lean alloys - Chemical etching
Anderson's etchant - Manganese - Chemical etching
Antimonium - Dislocation etching
Antimonium - Dislocation etching
Antimony - Electrolytic polishing
Antimony - For pure and technically pure types of Sb
Antimony - Sb and Sb alloys
Antimony - Sb and Sb alloys
Antimony - Sb and Sb alloys, Pb-Sb, Bi-Sn and Bi-Cd alloys
Antimony - Sb, Bi and their alloys
Antimony - Sb-Pb alloys
Antimony etchant - Ge and Si wafers - Chemical etching
Antimony selenide - Arsenic selenide system
Antimony specimens - Electrolytic mechanical polishing
Antimony specimens - Electrolytic polishing
Antimony specimens - Electrolytic polishing
Antimony specimens - Etch pits etching
Antimony specimens - Etch pits etching
Antimony specimens - For pure and technically pure types of Sb - Low alloy Sb
Aqua Regia - Aluminium - Chemical etching - Electrolytic polishing
Aqua Regia - Au-Al alloys - Chemical etching
Aqua Regia - Austenitic stainless steels
Aqua Regia - Austenitic stainless steels - Chemical etching
Aqua Regia - Austenitic stainless steels - Chemical etching
Aqua Regia - Chromium - Chemical etching
Aqua Regia - Fe-Ni-Cr heat resistant casting alloys - Etchant for delineating general structure
Aqua Regia - Gold - Chemical etching
Aqua Regia - Heat resistant alloys - Chemical etching
Aqua Regia - Lead sulphide (PbS) - Chemical polishing
Aqua Regia - Lead sulphide-selenide (PbS(1-x) x Se(x)) - Chemical etching
Aqua Regia - Molybdenum - Chemical etching
Aqua Regia - Ni-Cr-Fe alloys (Inconel) - Chemical etching
Aqua Regia - Pd thin film - Chemical cleaning
Aqua Regia - PdAu deposited as a 11 mixture on glass, quartz, and aapphire substrates - Chemical etching
Aqua Regia - Platinum - Chemical etching
Aqua Regia - Pt and alloys - Chemical etching
Aqua Regia - Pt-Tb alloys (20-35 at.% Tb) - Etch for TbPt3
Aqua Regia - Pure Au and alloys
Aqua Regia - Pure gold - Chemical etching
Aqua Regia - Refactaly steel - Chemical etching - General microstructure
Aqua Regia - Rh alloys - Chemical etching
Aqua Regia - Rh specimens as wire, rods, sheets, and plated coatings - Chemical etching
Aqua Regia - Rhodium - Chemical etching
Aqua Regia - Ru specimens - Chemical etching
Aqua Regia - Se Chemical etching
Aqua Regia - Selenium - Chemical etching
Aqua Regia - Stainless steel - Chemical etching
Aqua Regia - Stainless steel - Chemical etching
Aqua Regia - Wrought heat-resistant steels - Chemical etching
Aqua Regia - ZnTe thin film deposits - Chemical etching
Aqua Regia 5% - 73 J (Co-20Cr-6Mo) alloy - Chemical etching
Aqua Regia 6% - Cemented carbides (Co) - Electrolytic etching
Aqua Regia plus acetic acid etchant - Ferritic stainless steels - Chemical etching
Aqua Regia, dilute - Austenitic stainless steels - Chemical etching
Aqua Regia, dilute - Pb-Te-Co system - Lead telluride-Cobalt section
Aqua Regia, modified - GaP (111) wafers - Chemical etching
Armco Fe - Dislocation etching
Arsenic single crystal - Polishing and etching
As (0001) cleaved specimens - Chemical polishing
As (0001) wafers - Solution used as a general removal etch
As (111) specimens - Chemical polishing
As (111) specimens - Dislocation etching
As-Cd-Ge-Se system - For CdSe-Ge1.5-As0.5-Se3 section
As-Pb-Ge-Se system - PbSe-Ge1.5As0.5Se3 section
As-Sb system (single crystal) - Etching for pit etch
Astraloy - Ni-16/18Co-15/16Cr-4.5/5.5Mo-3.85/4.15Al-3.35/3.65Ti-0.03/0.09C (+B)
Au (100) single crystal thin films - Specimen preparation
Au (111) and (100) single crystal blanks - Chemical etching
Au (111) wafers and other orientations - Chemical etching
Au alloys - Chemical etching
Au alloys - Chemical etching
Au alloys - Chemical etching
Au alloys - Chemical etching
Au and Au alloys - Chemical etching
Au and Au alloys - Electrolytic etching
Au and alloys - Chemical etching
Au and alloys - Electrolytic etching
Au and alloys - Electrolytic etching
Au as hard gold coatings on copper substrates - Metal plating
Au as single crystal blanks - Abrasive polishing
Au diffused into silicon - Chemical etching
Au diffused into silicon wafers - Chemical etching
Au foil - Eletrolytic polishing
Au polycrystalline specimens - Acid, float-off
Au single crystal spheres - Thermal forming
Au slugs or wire - Chemical cleaning
Au specimens - Chemical etching
Au specimens - Electrolytic polishing
Au specimens - Electrolytic polishing
Au specimens - Oxide removal
Au specimens and thin films - Chemical etching
Au spherulitic particles - Chemical etching
Au thin film deposited by CVD - Metal diffusion
Au thin film deposited on glass - Chemical etching
Au thin film deposits on silicon wafers - Chemical etching
Au thin films - Chemical ecthing
Au thin films - Electrolytic polishing
Au thin films - Gas, diffusion
Au thin films - Thermal etching
Au thin films deposited on (0001) muscovite mica substrates - Acid, float-off
Au thin films deposited on (100) NaCl substrates - Acid, float-off
Au thin films deposited on glass - Chemical etching
Au thin films deposited on soda-lime glass - Thermal, structure
Au thin films evaporated on alumina substrates - Gas, drying
Au thin films pulse plated on alumina blanks - Gold plating
Au-20Sn & Sn-36Pb-2Ag alloys - Chemical etching
Au-Ag-Cu alloys - Chemical etching
Au-Ag-Cu alloys - Chemical etching
Au-B alloys - Chemical etching
Au-Cd alloy - Electrolytic polishing
Au-Cd alloy specimens - Chemical polishing
Au-Cd alloys - Also etches dislocation, grain boundaries
Au-Cd alloys - Chemical etching
Au-Co alloys - Electrolytic thinning
Au-Co alloys - For alloys with bellow 22 at.% Co
Au-Cr alloys - Cast alloys with < 41.5 at % Cr and > 95 at.% Cr
Au-Cr alloys - Electrolytic thinning
Au-Cr alloys - Jet electrolytic polishing
Au-Cu alloy - Cu3Au - Electrolytic thinning
Au-Cu alloy - Cu3Au - Electrolytic thinning
Au-Cu alloy - Cu3Au - Electrolytic thinning
Au-Cu alloy - Cu3Au- Electrolytic thinning
Au-Cu alloy - Electrolytic polishing
Au-Cu alloy - Electrolytic polishing and etching
Au-Cu alloy - For alloys with 25 at.% Au
Au-Cu alloys - For cast alloys
Au-Cu-Ag alloy - Au-36 at.% Cu-11 at.% Ag
Au-Cu-Ag alloys - Chemical etching
Au-Cu-Ag alloys - For Au-Cu-Ag alloys
Au-Cu-Co alloys - Chemical etching
Au-Fe alloys - For cast alloys with bellow 24 at.% Fe
Au-Ga alloys - For cast alloys with less then 12.7 at.% Ga
Au-Ga system - Chemical etching
Au-Ga thin films EB evaporated on NaCl (100) substrates - Gas, aging defects
Au-Ge alloys - For cast alloys with < 2.5 at.% Ge
Au-In alloy specimens - Chemical polishing
Au-In-Pb system - Alloys with 40-95 wt.% Pb, 30-5% AuIn2 may be examined unetched
Au-In-Te - Chemical etching
Au-Mn alloy - Electrolytic thinning
Au-Mn alloys - Electrolytic polishing
Au-Ni alloys - Electrolytic polishing
Au-Ni-Fe system - Fe-4Au-2Ni
Au-Ni-Fe system - Used on gold plated Ni-Fe alloys for intermediate layer diffusion
Au-Pb-Sn alloys - Chemical etching
Au-Sn-Pb alloys - AuSn-Pb section of diagram Au-Sn-Pb
Au-Sn-Pb alloys - Chemical etching
Au-Ti alloys - For cast alloys <12.3 at.% Ti
Au-V alloy (Au4V) - Electrolytic thinning
Au-V alloys - For cast alloys with < 60 at.% V and > 41.5 at.% V
Au-V system - Chemical etching
Au-Zn alloys - For cast alloys with < 30 at.% Zn
Au-Zn as an evaporated metal contact on InGaAsP/InP(100) - Chemical ecthing
Au/TiW thin - Films on Al film deposited on (111) silicon wafers-xgas, blister forming
Au2Bi specimens - Chemical etching
Au2Bi specimens as Bi-Au2Bi - Chemical etching
Au2Cs specimens - Chemical etching - Aqua Regia, dilute
Au2Ga thin films - Ionized gas thinning
AuAg(x) single crystal ingots - Chemical etching
AuGa2 (100) oriented thin films on NaCl - Chemical etching
AuGe (13%) alloy as Au/AuGe/Ni evaporated multilayered films - Chemical etching
AuGe (13%) alloy as pellets, sheets - Chemical etching
AuHg alloy specimens - Chemical polishing
AuSn (20%) alloy as evaporated thin films - Chemical etching
AuSn (20%) alloy ribbon - Chemical etching
AuSn (20%) alloy ribbon - Chemical etching - Tri-iodine etchant, modified
AuTi thin films - Chemical thinning
Austenite grain boundaries in case-hardened steels - Chemical etching
Austenite grain boundaries in case-hardened steels and steels for hardening and tempering - Chemical etching
Austenite grain boundaries in cold-worked steels - Chemical etching
Austenite grain boundaries in cold-worked steels - Chemical etching
Austenite grain boundaries in valve steels. Hardening and tempering steels, case-hardening steels - Chemical etching
Austenitic 18/8 stainless steels - Potentiostatic etching
Austenitic Mn steels - Chemical etching
Austenitic Mn steels - Chemical etching
Austenitic heat resistant materials - 80% Ni-20% Cr, 35% Ni-20%-45% Fe
Austenitic heat resistant materials - Austenitic heat resistant materials; 80% Ni-20% Cr, 35% Ni-20% Cr-45% Fe
Austenitic nickel steels - Chemical etching
Austenitic stainless steel - Chemical polishing
Austenitic stainless steel - Chemical polishing
Austenitic stainless steel - Fe-0.02/0.13C-0.2/1.6Si-0.4/8.0Mn-16/27Cr-5/21Ni-0.1/5.0Mn-0/01.9N
Austenitic stainless steel - Fe-0.02/0.13C-0.3/1.6Si-0.4/8.0Mn-16/27Cr-5/21Ni-0.1/5.0Mo-0/0.8Nb
Austenitic stainless steel - Fe-0.02/0.13C-0.3/1.6Si-0.7/8.0Mn-16/27Cr-5/21Ni-0.1/5.0Mo
Austenitic stainless steel - Fe-0.02/0.13C-0.3/1.6Si-0.7/8.0Mn-16/27Cr-5/21Ni-4.0/5.0Mo-0/0.6Ti
Austenitic stainless steel
Austenitic stainless steels - Attacks carbides and sigma phase
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Chemical etching
Austenitic stainless steels - Color etching
Austenitic stainless steels - Electrolytic etching
Austenitic stainless steels - Electrolytic etching
Austenitic stainless steels - Electrolytic etching
Austenitic stainless steels - Potentiostatic etching
Austenitic stainless steels and high alloy nickel steels - Electrolytic etching
Austenitic stainless steels and high alloy nickel steels - Electrolytic etching
Austenitic stainless steels and welds - Color etching - Reveals delta ferrite in welds
Austenitic steels, CrNi steels - Electrolytic polishing
Austenitic steels, CrNi steels, N-alloyed - Electrolytic polishing
Austenitic steels, CrNiMo steels - Electrolytic polishing - 17Cr, 17Ni, 4.5 Mo steels
Austenitic steels, CrNiMo steels - Electrolytic polishing - X120Mn12 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X2CrNiMoN18-4 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X2CrNiMoN20-15 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X2NiCoMo18-8-5 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X35Mn18 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X45CrMnN23-8 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X5CrNiMo18-10 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X6CrNi1-11 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X6CrNiMo17-13 steel
Austenitic steels, CrNiMo steels - Electrolytic polishing - X6CrNiMoN17-13 steel
B as boron nitride test blanks - Metal, removal/preferential
B etchant - For Ti
B etchant - Silicon - Chemical etching
B grown as thin films - Growth
B single crystal ingot - Chemical etching
B-C alloys - Chemical etching
B-C alloys - Electrolytic etching
B-Ge system
B-Pt alloys - Chemical etching
B-Si alloys - Chemical etching
B-doped SiC - Thermal etching
B1900 alloy - Ni-8Cr-6Mo-1Ti-6Al-10Co-4Ta-0.1C (+B, Zr)
B2 high temperature steel - Fe-9.3Cr-1.55Mo - High temperature ferritic-martensite steel
B2Te3 single crystal - Chemical etching
B4C - Electrolytic etching
B4C - Electrolytic etching
B4C - Electrolytic etching
B4C ceramic with SiC - Electrolytical etching
B4Ge3Ol2 single crystal - Chemical cleaning
B4Si specimens - Chemical etching
BCK-111 etchant - InP (100) wafers - Chemical etching
BF (100) oriented thin film - Chemical etching
BF3 etchant - Si single crystal spheres - Chemical ecthing
BHF etchant - NxSiO2 thin films - Chemical etching
BHF etchant - Si (100), p-type, 2 Ohm cm resistivity wafers - Chemical etching
BHF etchant - Si thin film epitaxy grown on (100) silicon wafer substrates
BHF etchant - Si3N4 thin film amorphous deposits - Chemical etching
BHF etchant - Si3N4 thin films RF plasma grown on silicon - Chemical etching
BHF etchant - Si3N4 thin films deposited on (100) silicon wafers - Chemical cleaning
BHF etchant - SiO2 thin films thermally evaporated - Chemical etching
BHF etchant - Ta (111) and (100) wafers - Chemical etching
BHF etchant - TiN thin films - Chemical etching
BHF etchant - TiN thin films deposited on poly-Si epitaxy layers - Chemical etching
BHF etchant - Zr specimens used for electroplating
BHF etchant, modified - Si3N4 and Si3NxOy thin films - Chemical etching
BHF etchant, modified - Si3N4 thin films - Chemical etching
BJ etchant - Ge (111) wafers - Chemical polishing
BN (100) cubic boron nitride - Metal, removal
BN amorphous thin films - Chemical etching
BN as pressed powder test blanks
BN as pressed powder test blanks - Chemical etching
BN as pressed powder test blanks - Chemical etching
BN as pressed powder test blanks - Chemical etching
BN single crystal films-Gas, crystallization
BP (100) and (111) single crystals - Molten flux
BP single crystal wafers - Electrolytic etching
BPK-221 etchant - InP (100) wafers - Chemical etching
BRM etchant - InP (100) n-type wafers - Chemical polishing
BRM etchant - WS2 single crystal specimens - Chemical polishing
BRM etchant - WSe2 single crystal specimens - Chemical polishing
BRM etchant - p-GaSb (111) wafers - Chemical etching
BSG as borosilicate glass on silicon - Metal diffusion
BSG etchant - SiO22 as a BSG glassy layer on silicon - Chemical etching
Ba specimen - A general removal and polish etch for barium
Ba specimen - This and other single acids can be used as general etchants for barium
Ba-Zr-S system (BaZrS3) - Chemical etching
Ba2Si2TiO2 single crystal - Chemical etching
Ba2TiO3 polycrystalline hemispheres - Cut, forming
Ba2TiO3 single crystal - Thermal processing
Ba2TiO3 specimens - Chemical polishing
BaF2 (111) specimen - Gas cleaning
BaF2 (111) wafers - Acid, float-off
BaF2 (111) wafers - Chemical polishing
BaF2 (111) wafers - Chemical polishing
BaF2 specimens - Chemical etching
BaF3 (111) wafers - Chemical etching
BaO in BaTi3O7, grain boundary etchant - Physical etching
BaSO4 - Chemical etching
BaTiO3 - Chemical etching
BaTiO3 - Dislocation etching
BaTiO3 and BaSrTiO3 - Chemical etching
BaTiO3 and BaTi3O7 - Chemical etching
BaTiO3 specimens - Chemical etching
BaWO4 single crystal - Chemical polishing
Bain-Vilella's etchant - Steel specimens - To reveal the prexisting austenite grain boundaries and tempered steels
Baker's etchant - Pure Al, Al-Zn, Al-Mn, Al-Mg-Si, Al-Zn-Mg and Al-Mn-Mg alloys - Electrolytic etching
Barber's etchant - NaCl (100) wafers - Chemical etching
Barium chloride (fluoride) - Chemical etching
Barium sulphate - Chemical polishing
Barium - Electrolytic polishing
Barium Magnesium titanate - Bax-Ti(8-x)-Mgx-O16, 1.14>x>0.6
Barium Sodium Niobate - This gives square etch pits with sides parallel to [110]T
Barium fluoride (BaF2) - Chemical etching
Barium fluoride (BaF2) - Chemical polishing
Barium fluoride (BaF2) - Physical etching
Barium fluoride single crystal (BaF2) - Chemical etching
Barium oxide (BaO) - Chemical etching
Barium oxide (BaO) - Chemical etching
Barium silicate (3BaO x 5SiO2) - Chemical etching
Barium titanate (Samarium doped) - Chemical etching
Barium titanate - Also used for La, Ne and Sc doped material
Barium titanate - BaTiO3, BaTi3O7
Barium titanate - Chemical etching
Barium titanate - Chemical etching
Barium titanate - Chemical polishing
Barium-lead-titanate-zirconate - (Pb0.7Ba0.3) x (Zr0.7TiO.3)3
Barker's anodizing solution for grain structure - Al and Al alloys - Chemical etching
Barker's etchant - 1000 series aluminium
Barker's etchant - Aluminium alloys - 1xxx, 3xxx, 5xxx, 6xxx series alloys, most casting alloy
Basic rules for obtaining damage-free mechanically polished specimens - EBSD sample preparation
Be (001), (100), and (110) wafers - Electrolytic polishing
Be alloys, precipitates - Chemical etching
Be dispersed Ni - Ni-1 vol.% BeO
Be dispersed Ni-Co-Mo alloys - Ni-4.5Mo-30Co-2 vol.% BeO
Be polycrystaline spheres - Thermal processing
Be single crystal - Electrolytic polishing
Be specimens - Chemical etching
Be specimens - Chemical etching
Be thin film - Acid, removal
Be thin film - Electrolytic thinning
Be thin film - Freeze etchant
Be-3% Fe alloy - Electrolytic thinning
Be-Ag alloy - Alloys with < 10% Ag
Be-Ag alloys - Chemical etching
Be-Al alloy - Alloys with < 1% Al
Be-B alloys - For alloys with up to 10% B
Be-Bi alloys - Alloy with 0.5% Bi
Be-Bi alloys - Alloy with 0.5% Bi
Be-C alloys - Chemical etching
Be-Ca alloys - For alloys with up to 1% Ca
Be-Ca alloys - For alloys with up to 1% Ca
Be-Ce alloy - Chemical cleaning
Be-Co alloys - Chemical etching
Be-Co alloys - For alloys with up to 10% Co
Be-Cr alloys - Chemical etching
Be-Cu alloys - For alloys with up to 15% Cu
Be-Cu alloys with high Cu content, Be-Ag and Be-Al-Ti alloys - Chemical etching
Be-Cu specimens - Chemical etching
Be-Fe alloys - Chemical etching
Be-Fe alloys - Electrolytic polishing and chemical thinning
Be-Fe alloys - For alloys with up to 6% Fe
Be-Fe alloys - Jet etching
Be-Ge alloys - Chemical etching
Be-Mg alloys - Chemical etching
Be-Mn alloys - Chemical etching
Be-Mo alloys - For alloys with < 1% Mo
Be-N alloys - Chemical etching
Be-Nb alloys - For alloys with up to 10% Nb
Be-Ni alloys - For alloys with up to 10% Ni
Be-O alloys - Chemical etching
Be-Os alloys - For alloys with up to 10% Os
Be-Pd alloys - For alloys with up to 10% Pd
Be-Pt alloys - For alloys with up to 20% Pt
Be-Rh alloys - For alloys with up to 10% Rh
Be-Ru alloys - For alloys with up to 10% Ru
Be-S alloys - Chemical etching
Be-Se alloys - Chemical etching
Be-Si alloys - Chemical etching
Be-Sn alloys - Chemical etching
Be-Sn alloys - Chemical etching
Be-Ta alloys - For alloys with < 1% Ta
Be-Th alloys - For alloys with up to 10% Th
Be-Ti alloys - For alloys with < 10% Ti
Be-U alloys - For alloys with up to 5% U
Be-U alloys!!!, Be-Nb, Be-Y, and Be-Zr alloys - Chemical etching
Be-U-Y system - Chemical etching
Be-W alloys - For alloys with < 1% W
Be-Zn alloys - For alloys with < 0.6% Zn
Be-Zr alloys - For alloys with up to 5% Zr
BeO (0001) single crystal wafers - Chemical ecthing
BeO (0001) single crystals - Mechanical, defect
BeO (0001) wafer - Chemical etching
BeO (0001) wafer - Chemical etching
BeO (0001) wafer - Chemical etching
BeO (0001) wafer - Chemical etching
BeO (0001) wafers and pressed powder substrates - Chemical etching
BeO - Chemical etching
BeO - Chemical etching
BeO - Chemical etching
BeO - Dislocation etching
BeO - Dislocation etching
BeO - Dislocation etching
BeO specimens - Chemical etching
BeO+UO2+Y2O3 - Chemical etching
BeO, BaO, MgO, ZrO2 and Zr2O3 - Chemical etching
Beaujard and Tordeux's tint etchant - Tint etchant for steels
Beaujard and Tordeux`s tint etchant - Reveals grain boundaries and ferrite orientations
Beaujard's tint etchant - Tint etchant for steels
Beaujard's tint etchant - Tint etchant for steels
Bechet and Beaujard's etchant - Martensitic and bainitic steels - Chemical etching
Beck's solution - Aluminium
Beck's solution - Aluminium - Dislocation etching
Beraha's E etchant - Ni superalloys
Beraha's I etchant - Unalloyed and low alloy steels
Beraha's II etchant - Austenitic CrNi steels - Chemical etching
Beraha's II etchant - High-alloy steels
Beraha's III I etchant - Ni-base alloys, Hastelloy X, Hastelloy
Beraha's III etchant - Ni base casting alloys - Chemical etching
Beraha's III etchant - Ni-base alloys with more than 9Mo, Hastelloy X, Hastelloy C - Chemical etching
Beraha's III etchant - Ni-base and Co-base alloys
Beraha's cadmium sulfide tint etchant - For Fe, steel, and ferritic and martensitic stainless steel - Chemical etching
Beraha's etchant - Al and Al alloys - Chemical etching
Beraha's etchant - Cu alloys, cast irons, ferritic and martensitic stainless steels
Beraha's etchant - Iron, steels, cast irons - Tint etchant for pure iron and carbon steels, cast iron, and alloyed steels
Beraha's etchant - Martensitic chromium steels - Tint etching
Beraha's etchant - Martensitic chromium steels - Tint etching
Beraha's etchant - Steels specimen - Sulfides are colored yelow and matrix dark
Beraha's lead sulfide tint etchant - Iron and steels - Chemical etching
Beraha's martensite etchant - Color etching for ADI iron
Beraha's selenic acid etchant for copper
Beraha's selenic acid etchant for steels and superalloys
Beraha's sodium molybdate etchant - For steels
Beraha's tint etchant - For Al alloys - Chemical etching
Beraha's tint etchant - Al and Al alloys - Tint etching
Beraha's tint etchant - Austenitic stainless steels, maraging steels, PH gredes
Beraha's tint etchant - Brass and Cu-Be alloys - Tint etching
Beraha's tint etchant - Cast Ti alloys - Tint etching
Beraha's tint etchant - Co-based alloys - Tint etching
Beraha's tint etchant - Cu and Cu alloys - Tint etching
Beraha's tint etchant - Cu, brass, bronze alloys - Tint etching
Beraha's tint etchant - Ferritic and martensitic stainless steels, Mn steels, tool steels
Beraha's tint etchant - For cast irons, steels, tool steels, Mn steels, and ferritic and martensitic stainless steels - Chemical etching
Beraha's tint etchant - For ferrite - Chemical etching
Beraha's tint etchant - For irons, steels, tool steels
Beraha's tint etchant - For pearlitic steels and and cast irons - Chemical etching
Beraha's tint etchant - For stainless steels
Beraha's tint etchant - For stainless steels
Beraha's tint etchant - Ni superalloys - Tint etching
Beraha's tint etchant - Ni-base alloys
Beraha`s tint etchant - For iron and steels
Beraha`s tint etchant - For stainless steels
Beraha`s tint etchant - For Fe, Ni, or Co base heat resistant alloys
Beraha`s tint etchant - For cast iron and steels
Beraha`s tint etchant - For stainless steels
Beryllia (BeO) - Thermal and chemical etching
Beryllia single crystals (BeO) - Dislocation etching
Beryllia-Tellurium system - Chemical etching
Beryllium - Attack polishing
Beryllium - Attack polishing
Beryllium - Attack polishing
Beryllium - Attack polishing
Beryllium - Attack polishing
Beryllium - Attack polishing
Beryllium - Be and Be alloys
Beryllium - Be and Be alloys
Beryllium - Be, grain boundary etch
Beryllium - Be-Ag and Be-Al-Ti alloys
Beryllium - Be-U, Be-Nb, Be-Y and Be-Zr alloys
Beryllium - Beryllia alloys (BeO) - Electrolytic thinning by Mirand-Saulnier technique
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching - For Be and Be alloys
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical etching
Beryllium - Chemical polishing
Beryllium - Chemical polishing, chemical thinning, electrochemical thinning
Beryllium - Chemical thinning
Beryllium - Chemical thinning
Beryllium - Dislocation etching
Beryllium - Electrolytic etching
Beryllium - Electrolytic etching
Beryllium - Electrolytic etching
Beryllium - Electrolytic etching
Beryllium - Electrolytic lapping
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing
Beryllium - Electrolytic polishing and etching
Beryllium - Electrolytic polishing and etching
Beryllium - Electrolytic thinning
Beryllium - Electrolytic thinning by Mirand-Saulnier technique
Beryllium - Electrolytic thinning by window technique
Beryllium - Electrolytic thinning by window technique and electrolytic polishing
Beryllium - Electrolytic thinning of large specimens
Beryllium - Electrolytical etching
Beryllium - For most types of Be and Be alloys
Beryllium - Grinding and polishing
Beryllium - Grinding and polishing
Beryllium - Heat tint etching
Beryllium - Jet electrolytic polishing
Beryllium - Jet electrolytic polishing
Beryllium - One of the best electrolyte for universal use
Beryllium - Polishing and chemical etching
Beryllium - Precipitates
Beryllium - Precipitates, grain boundary
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical etching
Beryllium oxide (BeO) - Chemical polishing
Beryllium oxide (BeO)-single crystal - Chemical etching
Berzelius etchant - For dissolving the Fe matrix in the steel samples
Beta SiC thin films grown on Si, (100) wafers - Chemical etching
Beta alumina - 418 90.5% Al2O3, 9.25% Na2O, 0.25% Li2O. A 90.2% Al2O3, 9.0% Na2O, 0.8% Li2O
Beta alumina - 90.4% Al2O3, 8.9% Na2O, 0.7% Li2O
Beta alumina - 90.6% Al2O3, 8.7% Na2O, 0.7% Li2O
Beta alumina - Physical etching
Beta brass (45% Zn) - Chemical and electrolytic polishing
Beta brass (Cu-Zn) - Alloys with 45-48% Zn
Beta brass (Cu-Zn) - Chemical polishing and electrolytic thinning
Beta brass - Chemical etching
Beta-Al2O3Na doped substrate - Chemical cleaning
Beta-Al2O3Na doped substrate - Cleaning
Beta-III titanium alloy - Ti-11.5Mo-5-6Zr-4.5Sn
Beta-III titanium alloy - Ti-11.5Mo-6Zr-4.5Sn
Beta-III titanium alloy - Ti-11.5Mo-6Zr-4.5Sn
Beta-III titanium alloys - Chemical polishing
Beta-Si3N4 - Chemical etching
Beta-SiC (0001) wafers - Molten flux etching
Beta-SiC (001) single crystal blanks - Ionized gas ecthing
Beta-SiC (001) single crystal blanks - Thermal cleaning
Beta-SiC thin films grown on (100) silicon - Chemical cleaning
Beta-alumina-silica system - Al2O3-up to 7.5% SiO2
Beta-phase Zircaloy - Chemical etching
Beta-tin (Sn) - Chemical etching
Bi (0001) wafers - Chemical etching
Bi (0001) wafers - Chemical polishing
Bi and Sb alloys - Chemical etching
Bi sellenide - Chemical etching
Bi single crystal - Chemical etching
Bi telluride - Chemical etching
Bi(2-y)Sb(y)Te(x)Se(3-x)-BiSbTeSe alloys
Bi(2-y)Sb(y)Te(x)Se(3-x)-BiSbTeSe alloys
Bi-Cd alloy and single crystal specimens - Chemical etching
Bi-Cd alloys - Chemical etching
Bi-In alloys - Chemical etching
Bi-In alloys - Chemical etching
Bi-In alloys - Chemical etching
Bi-Mn system - Bi-MnBi eutectic
Bi-Sb-Te system - Bi0.5 x Sb1.5 x Te3+x
Bi-Sb-Te-Se system - Bi0.52 x Sb1.48 x Se0.13 x Te3.09
Bi-Sb-Te-Se system - Chemical etching
Bi-Se system - Bi2Se3+x alloys
Bi-Sn alloy (50 at.% Sn) - Chemical etching
Bi-Sn alloys (5-25% Sn) - Chemical etching
Bi-Sn and Bi-Cd alloys - Chemical etching
Bi-Sn, Bi-Cd and Bi-Pb eutectic alloys - Chemical etching
Bi-Te system - Chemical etching
Bi-Te-Tl alloys - Chemical etching
Bi12-GeO20 specimens - Chemical polishing
Bi12GeO20 single crystal - Chemical etching
Bi12SiO20 single crystal - Chemical etching
Bi2O3 deposited as a thin film - Chemical etching
Bi2Se3 (0001) cleaved wafers - Electrolytic, oxidizing
Bi2Se3 (0001) wafers - Chemical cleaning
Bi2Se3 (0001) wafers - Chemical polishing
Bi2Se3 single crystal ingot - Chemical polishing
Bi2Te3 (0001) wafers - Chemical ecthing
Bi2Te3 (0001) wafers - Chemical etching
Bi2Te3 (0001) wafers - Chemical etching
Bi2Te3 (0001) wafers - Chemical etching
Bi2Te3 specimens - Etchant for revealing dislocations in Bi2Te3
Bi2Te3 specimens - Thermal etching for etch pits
BiSb alloys - Chemical polishing
BiSb single crystals Te doped - Dislocation etching
BiSe - Dislocation etching
BiSn alloy and single crystal specimens - Chemical etching
BiTe - Dislocation etching
BiTe and BiSe - Electrolytic etching
BiTe and GaP - Chemical etching
Bichromate finish dip etchant - Brass (70Cu-30Zn), bronze, and copper parts - Chemical etching
Billig's etchant - For Ge, Si
Bismuth - Attack polishing
Bismuth - Attack polishing
Bismuth - Bi-Sn eutectic, Bi-Cd alloys
Bismuth - Chemical etching
Bismuth - Chemical etching
Bismuth - Chemical etching
Bismuth - Chemical polishing and etching
Bismuth - Dislocation etching
Bismuth - Dislocation etching
Bismuth - Dislocation etching
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing
Bismuth - Electrolytic polishing and etching
Bismuth - Physical etching
Bismuth - Physical etching
Bismuth - Sb, Bi and their alloys
Bismuth selenide and bismuth telluride - Electrolytic etching
Bismuth telluride - Electrolytic jet polishing
Bismuth-single crystal - Electrolytic polishing
Bismuth-single crystal - Etching for etch pits
Bitter-technique - Magnetic materials
Blackburn and William's solution - A286 stainless steel - Standard and modified
Blackburn and William's solution - Ti-Mo alloy - Alloy with 11.6% Mo
Blackburn and William's solution - Ti-Mo-Al-Sn-Zr alloy - Titanium 6246-6Al-2Sn-4Zr-6 Mo
Blackburn and Williams's solution - Ti-Mo alloys
Blackburn-William's electrolyte - Ti-Al-Nb alloy - Ti3Al-Nb
Borides of Hf, Nb, Ti, V or Zr - Attack polishing
Boron carbide (B4C) - Chemical etching - For revealing dislocations
Boron carbide (B4C) - Chemical etching
Boron carbide (B4C) - Electrolytic etching
Boron carbide (B4C) - Electrolytic etching
Boron carbide (B4C) - Electrolytic etching - For revealing dislocations
Boron carbide (B4C) - For revealing dislocations
Boron carbide (B4C) - Physical etching - For revealing dislocations
Boron carbide (BC)-Silicon carbide system (SiC) - Electrolytic etching
Boron carbide B4C - Etching
Boron nitride (BN) - Chemical etching
Boron nitride (BN) - Chemical etching
Boron specimens - Chemical etching
Boss's etchant - Al and Al alloys - Chemical etching
Bossert's etchant - Al and Al alloys - Chemical etching
Brass (70Cu-30Zn) - Chemical etching
Brass (70Cu-30Zn) - Scale dip or fire-off dip
Brass (70Cu-30Zn) and bronze parts - Chemical etching
Brass (70Cu-30Zn), bronze, and copper alloys - Chemical etching
Brass - Potentiostatic etching
Brass specimens (70Cu-30Zn) - Chemical etching
Brass specimens (Cu-Zn) - Electrolytic etching
Brass specimens - Acid, cutting
Brass specimens - Electrolytic etching
Brass specimens - Electrolytic polishing
Brass specimens - Electrolytic polishing
Brass specimens - Electrolytic polishing
Brass specimens - Electrolytic polishing
Brass specimens and parts (70Cu-30Zn) - Chemical etching
Brass, as single crystal alpha-brass - Electrolytic polishing
Brass, bronze, and copper alloy parts - Chemical etching
Brasses (Cu-Zn) specimens - Electrolytic polishing
Brasses, alpha bronze, Alpaca, Cu-Be, Cu-Cr, Cu-Mn, Cu-Ni, and Cu-Si alloys - Chemical etching
Bright dip etchant - Brass, bronze, and copper alloy
Bright-field etchant for U - Electrolytic etching
Brilliant's etchant - Cu and Cu alloys
Brilliant's etchant - Cu and Cu alloys - Chemical etching
Brite dip etchant - Aluminium and alloys
Bromine etchant - As (111) specimens - Dislocation etching
Bronze (up to 6% Sn) - Electrolytic polishing
Bronze (up to 9% Sn) - Electrolytic polishing
Bronze - Electrolytic polishing
Bronze and brass cryogenic trailer piping - Chemical cleaning
Bronze and brass cryogenic trailer piping - Chemical cleaning
Bronze specimen - Chemical etching
Bronze specimens - Electrolytic polishing
Bulk polypropylene - Chemical etching
C (0001) cleaved pyrolytic graphite - Physical etching
C (0001) specimens - Molten flux etching
C (diamond) - Dislocation etching
C (diamond) - Dislocation etching
C (synthetic diamond) - Dislocation etching
C as both carbon and graphite parts - Chemical etching
C as bulk graphite or thin film deposit - Acid reduction
C as bulk graphite or thin film deposit - Chemical etching
C as graphite single crystal material - Stress, defect
C as natural graphite - Chemical etching
C as natural graphite specimens - Chemical etching
C as single crystal graphite - Cleave
C as single crystal graphite specimens - Gas oxidation
C as single crystal graphite specimens - Metal decoration
C as thin films - Cleaning
C doped Nb-Al alloy - Nb3Al + up to 0.4 at.% C
C specimens - Chemical cleaning
C4F8 (octofluorocyclobutane)
CMSX-6 alloy - Electrolytic polishing
CO2 as solid "Dry Ice" - Alcohol, chilling
CO2 single crystal - Cryogenic gas, forming
CP4 etchant - LiF - Dislocation etching
CP4 etchant - Antimonium - Dislocation etching
CP4 etchant - For Si, Ge, Sb, TiC, InSb, InAs
CP4 etchant - InSb (111) wafers - Chemical polishing
CP4 etchant - LiF (10O) cleaved wafers - Dislocation etching
CP4 etchant - Si wafers - Chemical etching
CP4 etchant - Si-Ge single crystal ingots - Chemical etching
CP4 etchant - Silicon - Chemical polishing
CP4 etchant - Te (0001) cleaved wafers - Chemical etching
CP4 etchant - ZnO thin film deposit - ZnO thin film deposit formed by oxidation of ZnSe
CP4 etchant, modified - InAs (111) wafers used in a polarity study - Chemical etching
CP4 etchant, modified - Silicon specimens - Chemical etching
CP4 etchants, dilute CP4, modified - Ge (111), (100), (110), and (211) wafers - Chemical etching
CP4, variety CP4A etchant - InSb (111) wafers and other orientation - Chemical polishing
CP4A etchant - FeGe2 (100) and (110) wafers - Chemical etching
CP4A etchant - InSb (111) wafers - Chemical etching
CP4A etchant - Si (111) wafers and other orientations - Chemical polishing
CP4A or CP8 etchants - Silicon - Final chemical polishing
Ca metal - Acid, reactive
Ca metal - Metal, reactive
Ca pure metal specimens - Oxidation
Ca specimens - Chemical removal
Ca(x)Zr(10-x)O(y) - Chemical etching
Ca-Cu alloy - Approx. Cu5Ca
Ca-In alloys - Chemical etching
Ca-Yb system - Electrolytic polishing
Ca2B6O11 x 5H2O (010) cleaved wafers- Chemical etching
Ca2N3 thin films - Chemical etching
Ca3Al2Ge3O12 single crystal ingot - Chemical cleaning
Ca5(PO4)1F-Nd single crystals - Chemical etching
Ca5(PO4)3F - Physical polishing
CaCO3 (1011) cleaved substrates - Chemical polishing
CaCO3 (1011) cleaved wafers - Dislocation etching
CaCO3 (10l1) cleaved wafers - Dislocation etching
CaCO3 - Chemical polishing
CaCO3 - Dislocation etching
CaCO3 r(1011) cleaved wafers - Acid cleaning
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaCO3 r(1011) cleaved wafers - Dislocation etching
CaF2 (100) cleaved wafers - Cleaning
CaF2 (100) thin films deposited on GaAs, (100) substrates - Chemical etching
CaF2 (111) cleaved wafers - Chemical etching
CaF2 (111) cleaved wafers - Dislocation etching
CaF2 (111) wafers - Chemical etching
CaF2 - Dislocation etching
CaF2 - Dislocation etching
CaF2 - Dislocation etching
CaF2 natural fluorite crystals - Chemical polishing and cleaning
CaF2 specimen - Chemical etching
CaF2 specimen - Chemical etching
CaF2 specimen - Chemical etching
CaF2 specimens - Cleaning
CaMoO4 single crystals
CaO - Chemical etching
CaO - Chemical etching
CaO and MgO - Chemical etching
CaO, MgO - Chemical etching
CaSiF2 single crystals - Chemical etching
CaSnF2 thin film - Chemical etching
CaTiO3 - Chemical etching
CaW04 (100) wafers - Chemical etching
CaW04 single crystal specimens - Chemical polishing
CaW04 single crystal specimens - Dislocation etching
CaWO4 (001) wafers - Chemical etching
CaWO4 (001) wafers - Chemical etching
CaWO4 (001) wafers - Chemical etching
CaWO4 single crystal specimens - Chemical polishing
CaWO4 single crystals - Pressure processing
Cadmium - Alpha or beta brass, Cu-Fe, Cu-Co, Co, Cd
Cadmium - Cathodic etching
Cadmium - Cd and Cd alloys
Cadmium - Cd and solder alloys containing Cd
Cadmium - Cd, In, Tl, In-Sb and In-As alloys
Cadmium - Cd-Sn and Cd-Zn eutectics
Cadmium - Chemical etching
Cadmium - Chemical etching
Cadmium - Chemical etching
Cadmium - Chemical etching
Cadmium - Chemical polishing
Cadmium - Chemical polishing
Cadmium - Chemical polishing
Cadmium - Chemical polishing
Cadmium - Chemical thinning
Cadmium - Dislocation etching
Cadmium - Dislocation etching
Cadmium - Dislocation etching
Cadmium - Electrolytic etching
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic polishing
Cadmium - Electrolytic-mechanical polishing
Cadmium selenide (CdSe) - Chemical etching
Cadmium selenide (CdSe) hexagonal single crystal - Chemical etching
Cadmium selenide (CdSe) single crystal - Etch for (0001) facet
Cadmium single crystal - Chemical etching
Cadmium single crystal - Chemical polishing
Cadmium single crystal - Chemical polishing
Cadmium single crystal - Chemical-mechanical polishing
Cadmium specimens - Chemical etching
Cadmium sulphide (CdS) - Chemical etching
Cadmium sulphide (CdS) - Chemical etching
Cadmium sulphide (CdS) - Chemical polishing
Cadmium sulphide (CdS) - Chemical polishing and etching
Cadmium sulphide (CdS) - Electrolytic-mechanical polishing and etching
Cadmium sulphide (CdS) - Removal of surface damage
Cadmium sulphide (CdS) single crystal - Chemical etching
Cadmium sulphide (CdS) single crystals - Chemical polishing and etching
Cadmium sulphide (CdS) single crystals - Chemical polishing and etching
Cadmium telluride (CdTe) - Chemical polishing
Cadmium telluride (CdTe) - Chemical polishing
Cadmium telluride (CdTe) - Chemical polishing
Cadmium telluride (CdTe) - Chemical polishing and etching
Cadmium telluride (CdTe) - Chemical polishing and etching
Cadmium telluride (CdTe) - Dislocation etching
Cadmium telluride (CdTe) - This will remove work hardened layer
Cadmium telluride (CdTe) - To distinguish from Cd(x)Hg(1-x)Te, CdTe may be stained with above etchant
Cadmium telluride (CdTe) single crystal - Chemical polishing
Cadmium-Copper (Cd-Cu) - Electric contact material
Cain's B etchant - For Hf
Cain's etchant - Hf, Zr and allloys - Chemical etching
Cain's etchant - Hf-W eutectoid alloys - Chemical etching
Calcium fluoride (CaF2) - Chemical etching
Calcium fluoride (CaF2) - Chemical etching
Calcium fluoride (CaF2) - Etch pit etch
Calcium fluoride (CaF2) - Etching for etch pits
Calcium fluoride (CaF2) - Final chemical polishing
Calcium fluoride (CaF2) - Jet chemical thinning
Calcium fluoride (CaF2) - Thermal etching
Calcium fluoride (CaF2) - This etchant produce etch pits parallel to <111> cleavage planes
Calcium fluoride (CaF2) - This will produce etch pits
Calcium oxide (CaO) - Chemical etching
Calcium oxide (CaO) - Chemical etching
Calcium oxide (CaO) - Chemical etching
Calcium oxide (CaO) - Chemical etching
Calcium phosphate - Ca3(PO4)2
Calcium specimen - Electrolytic polishing
Calcium tartrate crystals - CaC4H4O6 x 3H2O
Calcium zirconate (Ca0.16 xZr0.34 x O1.84) - Chemical etching
Californium - Chemical etching
Camp No. 2 (Superoxol) etchant - Si (111) n-type wafers and p-doped with 60Co - Chemical etching
Camp No. 2 (Superoxol, CP2) etchant - Ge (111) wafers - Chemical etching
Camp No. 3 (CP3) etchant - Ge (111) wafers - Chemical etching
Camp No. 4 (CP4) etchant - Ge (100) wafers and other orientations - Chemical polishing/etching
Camp No. 8 (CP8) etchant - Si (111) wafers - Chemical etching
Canada's etchant - Nickel superalloy 718 - Chemical etching
Carapella's etchant - Fe-Ni, Ni-Cu, and Ag alloys, Ni-base superalloys, Monel metal
Carapella's etchant - Ni and Ni-Cu (Monel) alloys - Chemical etching
Carbides in steels - Chemical ecthing
Carbon (diamond) - Chemical etching
Carbon (graphite carbon fibre composite) - Chemical etching
Carbon - Chemical etching
Carbon alloys - Electrolytic polishing
Carbon and alloy steels - Etches some alloy steels
Carbon and alloy steels - For grading inclusions
Carbon and alloy steels - For resolution of hardened structures
Carbon and alloy steels - Good general-purpose electrolyte
Carbon and alloy steels - Produces good contrast in as-quenched martensitic structures
Carbon and alloy steels - Reveals integranular oxidation
Carbon and alloy steels - Reveals lead inclusions
Carbon and alloy steels - Reveals lead inclusions by coloring them red
Carbon and alloy steels - Reveals maximum detail in pearlite, untempered and tempered martensite
Carbon and alloy steels - Reveals pearlite colonies
Carbon and alloy steels with medium carbon content - Examination of inclusions
Carbon and alloy steels with medium carbon content - For resolution of hardened structures
Carbon and alloy steels with medium carbon content - Reveals intergranular oxidation
Carbon and alloy steels with medium carbon content - Reveals lead inclusions
Carbon dioxide (CO2)-Gas oxidation
Carbon specimens - Cemical cleaning
Carbon specimens - Chemical etching
Carbon specimens - Gas cleaning
Carbon specimens - Thermal, forming
Carbon steel - Chemical polishing
Carbon steels - Chemical polishing
Carbon steels - Color etching - Banded structures
Carbon steels - Color etching - Colors the martensite
Carbon steels - Color etching
Carbon steels - Electrolytic polishing
Carbon steels - Electrolytic polishing
Carbon steels - Electrolytic polishing
Carbon steels - Electrolytic polishing
Carbon steels - Electrolytic polishing
Carbon steels, alloy steels, tool steels - Color etching - For sulfides and other phases
Carbon steels, alloy steels, tool steels - Color etching
Carbon steels, alloy steels, tool steels - Color etching
Carbon steels, slloy steels, tool steels - Color etching - For sulfides and other phases
Carbon steels, tool steels - Color etching
Carbon, alloy and Fe-Mn (5-18% Mn) steels - Color etching
Carbon, alloy and manganese steels - Color etching
Carbon, alloy and tool steels - Color etching
Carbon-Carbon composites - Chemical etching
Carburized steels - Electrolytic etching
Caro's etch, modified - Si (111) p-type wafers used for diffusion of antimony from glass
Caro's etchant - GaAs (100) n-type wafers grown by LEC as ingots - Chemical etching
Caro's etchant - Si (111) wafers and other orientations - Chemical cleaning
Caro's etchant, modified - Si (111) wafers used in a study of ion bombardment cleaning - Chemical polishing
Carpella's etchant - Ni-B alloys - Chemical etching
Carpenter special #4 etchant - AerMet 310/340, AerMet 100 steels - Chemical etching
Carpenter special #5 etchant - Co-Ni alloys - Chemical etching
Cast alloy steels - Chemical etching
Cast alloy steels - Chemical etching
Cast alloy steels - Chemical etching
Cast and carburized NiCr 8020 steel - Chemical etching
Cast iron - Chemical etching
Cast iron specimens - Electrolytic polishing
Cast iron specimens - One of the best electrolyte for universal use
Cast iron, low-alloy steels - Chemical polishing
Cast irons (gray, white, or nodular) - Electromechanical polishing
Cast irons - Austenite cast irons
Cast irons - Blackens cementite
Cast irons - Blacknens cementite
Cast irons - Chemical etching
Cast irons - Chemical etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Color etching
Cast irons - Electrolytic polishing - Cast irons with spher. graphite
Cast irons - General purpose etching of all pearlitic gray, melleable and ductile cast irons
Cast irons - General purpose etching of all pearlitic gray, melleable and ductile cast irons
Cast irons - Good general-purpose electrolyte
Cast irons - High chromium irons
Cast irons - High-silicon irons (14 to 16% Si)
Cd (111) and (100) single crystal wafers - Chemical polishing
Cd as single crystals and alloy specimens - Chemical etching
Cd dislocation free single crystals - Mechnical, defect
Cd powder used for epitaxy growth of CdSe and (Cd,Se)(1-x)Zn(x) - Chemical cleaning
Cd pre-forms and alloy wire - Chemical cleaning
Cd single crystal specimens - Chemical thinning
Cd single crystal specimens - Physical etching
Cd single crystal wafer-Mechanical, orientation
Cd single crystals - Dislocation etching
Cd specimens - Chemical polishing
Cd specimens and alloys - Chemical cleaning
Cd spheres - Plastic, forming
Cd tellerude - CdTe2O5
Cd, Cd-Ag alloys (up to 3% Ag) - Chemical polishing
Cd-1.5% Zn alloy - Chemical polishing
Cd-Ag alloys - Chemical etching
Cd-Cu alloy - Cd-CuCd3 eutectic
Cd-Ga alloy - Selective etchant for Cd to allow SEM examination
Cd-Ga-S-Se system - CdGa2S(1-x)Se(4x)
Cd-Ge alloy - Alloy with eutectic composition
Cd-Hg-Te system - Cd(0.15)Hg(0.85)Te
Cd-Hg-Te system - Chemical etching
Cd-Hg-tellerude - Dislocation etching
Cd-Hg-tellerude - Etching for etch pits
Cd-Hg-tellerude - Hg(1-x)Cd(x)Te
Cd-Mg alloy (low Mg) - Chemical polishing and etching
Cd-Mg alloy - Mg3Cd - Thinning for TEM
Cd-Pb eutectic - Chemical etching
Cd-Pb eutectic - Physical etching
Cd-Zn eutectic alloys - Chemical polishing
Cd-Zn eutectic alloys - Electrolytic polishing
Cd-Zn alloys - Chemical etching
Cd-Zn eutectic alloy - Chemical etching
Cd-Zn eutectic alloy - Electrolytic polishing
Cd-Zn eutectic alloy - Electrolytic polishing
Cd3As2 single crystal specimen - Chemical polishing
CdF2 single crystal ingots - Thermal, annealing
CdF2 specimen - Chemical polishing
CdF2 specimen - Chemical polishing-etching
CdI2 (0001) wafers - Chemical polishing
CdIn2Se4 single crystal specimens - Chemical etching
CdIn2Se4 single crystal specimens - Chemical polishing
CdIn2Te4 wafers - Chemical polishing
CdO as a surface oxide - Chemical cleaning
CdO native oxide - Chemical etching
CdP2 deposited as a thin film on InP - Chemical etching
CdS (0001) and (1010) wafers - Chemical etching
CdS (0001) and (1013) wafers - Chemical etching
CdS (0001) wafer - Chemical etching
CdS (0001) wafer - Chemical etching
CdS (0001) wafer - Chemical ething
CdS (0001) wafer - Chemical/mechanical polishing
CdS (0001) wafers - Chemical cleaning
CdS (0001) wafers - Chemical cleaning
CdS (0001) wafers - Chemical etching
CdS (0001) wafers - Chemical etching
CdS (0001) wafers - Chemical etching
CdS (0001) wafers and CdSe (1010) cleaved wafer-Light, reactive
CdS (100) wafer - Chemical polishing
CdS (100) wafers - Chemical etching
CdS (1010) wafers - Chemical etching
CdS (1010) wafers - Chemical etching
CdS (111) wafer - Chemical etching
CdS (111) wafers - Chemical polishing
CdS (111) wafers - Chemical polishing
CdS - Chemical etching
CdS - Dislocation etching
CdS - Dislocation etching
CdS single crystal specimen - Chemical and thermal etching
CdS speciman - Chemical etching
CdS wafers copper plated - Chemical etching
CdSb (100) wafer - Chemical polishing
CdSe (0001) - Chemical cleaning
CdSe (0001) - Chemical cleaning
CdSe (0001) - Chemical cleaning
CdSe (0001) - Chemical etching
CdSe (0001) or (1120) wafers - Chemical etching
CdSe (0001) wafers - Chemical etching
CdSe (0001) wafers - Chemical etching
CdSe (0001) wafers - Chemical etching
CdSe (0001) wafers - Chemical etching
CdSe (0001), (1010) and (1120) wafers - Chemical etching
CdSe (0001), (lOlO) and (1120) - Chemical etching
CdSe (1010) cleaved wafers - Light, reactive
CdSe - Dislocation etching
CdSe - Dislocation etching
CdSe and (Cd,Se)xZn(1-x) single crystal thin films - Chemical etching
CdSe as a deposited polycrystalline thin film - Chemical etching
CdSe polycrystalline thin film - Chemical polishing
CdSe thin film - Chemical etching
CdSe thin film - Chemical etching
CdSe(120) n-type wafers - Chemical etching
CdSiAs2 (001) and (111) wafers - Chemical etching
CdTe (100) wafers - Chemical polishing
CdTe (100), (111), and (110) wafers - Chemical etching
CdTe (111) - Electrolytic oxidation
CdTe (111) n-type wafers - Chemical polishing
CdTe (111) wafers - Acid, burn
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical etching
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Chemical polishing
CdTe (111) wafers - Dislocation etching
CdTe (111) wafers and ingots - Chemical etching
CdTe (111), (100) and (110) wafers - Chemical etching
CdTe (111), (100), and (110) wafers - Thermal etching
CdTe single cystal ingot - Chemical cleaning
CdTe thin film - Chemical float-off
CdTe-HgTe specimens - Chemical polishing-etching
Ce and alloys - Chemical etching
Ce-Ag alloys - Chemical etching
Ce-Ag alloys - Chemical etching
Ce-Al alloy - Anodising
Ce-Au alloys - Chemical etching
Ce-Bi system - Chemical etching
Ce-Co alloys (CeCo5) - Electrolytic polishing
Ce-Co alloys - Chemical etching
Ce-Mg alloy - Alloys with 0-10 wt.% Mg
Ce-Mn alloy - Alloys with 0-20 at.% Mn
Ce-Ni alloy (Laves phase CeNi2) - Chemical etching
CeAl3 single crystal - Chemical etching
CeB6 ingots - Thermal annealing
CeBr (001) specimens - Metal decoration
CeBr (100) specimens - Chemical polishing
CeC2 - Chemical etching
CeCu6 single crystal - Chemical etching
CeO2 - Chemical etching
CeO2 - Chemical etching
CeO2 - Chemical etching
CeO2 - Chemical etching
CeO2 or Ce2O3 specimens - Chemical etching
CeO2, SrTiO3, Al2O3, and ZrO-ZrC - Chemical etching
CePt specimens - Chemical etching
CeSi2 specimens - Chemical etching
Cellulose nitrate - Chemical etching
Cemented carbides (Co) - Chemical etching
Cemented carbides (Co) - Chemical etching
Cemented carbides (Co) - Chemical etching
Cemented carbides (Co) - Chemical etching
Cemented carbides - Can be used for all compositions - Chemical etching
Cemented carbides, Kovar (Fe) - Chemical etching
Ceramic - EBSD sample preparation
Ceramic Cr-SiO2 (30%) - Chemical etching
Ceramic Cr-SiO2 (30%) - Chemical etching
Ceramic specimens - Metal, contacts
Ceramics, borides - CrB2, MoB2
Ceramics, borides - HfB2-NbB2 mixtures
Ceramics, borides - TaB2, LaB4
Ceramics, borides - TiB2
Ceramics, borides - TiB2
Ceramics, borides - ZrB2
Ceramics, borides - ZrB2, TiB2
Ceramics, carbides - (U, Pu)C high in U. UC-PuN mixtures
Ceramics, carbides (Fe, Si)-(Fe,Si)C
Ceramics, carbides - (Th, U)C with U/Th ratio, ThC2
Ceramics, carbides - (Th, U)C2
Ceramics, carbides - (U, Ou)C high in Pu
Ceramics, carbides - (U, Pu)C
Ceramics, carbides - B4C
Ceramics, carbides - CrC, HfC, VC, (Al, Ti)C
Ceramics, carbides - KC
Ceramics, carbides - MoC2, CrC2
Ceramics, carbides - NbC, NbC2
Ceramics, carbides - PuC (dendritic)
Ceramics, carbides - PuC
Ceramics, carbides - SiC
Ceramics, carbides - SiC
Ceramics, carbides - SiC
Ceramics, carbides - SiC
Ceramics, carbides - Ta(C, N, O)
Ceramics, carbides - TaC
Ceramics, carbides - ThC
Ceramics, carbides - ThC2
Ceramics, carbides - ThO2
Ceramics, carbides - TiC
Ceramics, carbides - TiC, TaC
Ceramics, carbides - UC, U(C, O), UC-UC2, UC2-U2C3 mixtures, (U, Pu)C high in C, U(C, N) UC-ZrC
Ceramics, carbides - UC-Cr23C6 mixtures
Ceramics, carbides - UC-Pu mixtures
Ceramics, carbides - WC
Ceramics, carbides-ThC
Ceramics, nitrides - (Al, Ti)N
Ceramics, nitrides - NbN (yelow), Nb2N (light red)
Ceramics, nitrides - Si3N4
Ceramics, nitrides - Si3N4
Ceramics, nitrides - Si3N4
Ceramics, nitrides - Si3N4, UN
Ceramics, nitrides - UN
Ceramics, nitrides - UN
Ceramics, nitrides - UN
Ceramics, nitrides - UN
Ceramics, nitrides - UN, UN-U2N mixtures
Ceramics, nitrides - UN-U(N2O)-U2N3 mixtures
Ceramics, nitrides - UN-U2N3 mixtures
Cerium - Chemical etching
Cerium - Chemical polishing
Cerium dicarbide - Chemical etching
Cerium oxide (CeO2) - Chemical etching
Cerium oxide - Chemical etching
Cerium oxide-silicon nitride system - (1Si3N41CeO2)
Cerium specimens - Chemical etching
Cerium specimens - Chemical etching
Cerium specimens - Chemical etching
Cerium specimens - Chemical solution
Cerium specimens - Electrolytic polishing
Cerium specimens - Electrolytic polishing
Cermets - (Y3Al)C-Y3C-Y
Cermets - Cr23C6-UF2, US-U, UC2-UNi5
Cermets - NbCz-NbFe-Nb
Cermets - PuC-Pu
Cermets - TiC-Ni
Cermets - TiCN-Co, TiN-Fe, TiN-Mo, TiN-W
Cermets - UN-U, UN-W
Cermets - UO2-Al
Cermets - UO2-Cr
Cermets - UO2-Mo
Cermets - UO2-Nb
Cermets - US-Co, UC22-Fe, (UZr)C-Nb, (UZr)C-Ta, (UZr)C-W
Cermets - ZrO2-W, ThO2-W, W2C-W, UC-Cr, UC-Fe, UC-Ni, UC-UFe2
Cermets, sintered carbides - Attack polishing
Chase's etchant - Ag-30% Zn alloy - Chemical polishing
Chemical and electrolytic polishing of cobalt and cobalt alloys
Chemical polishing of 6061 aluminum - EBSD sample preparation
Chen-Hendrickson's etchant - For Ag
Chi phase (M18C or Fe36Cr12Mo10) in steels - Chemical etching
Chlorine - Electrolytic, gas jet
Chlorine - Gas etching
Chlorine water - Acid, disinfectant
Chrome dislocation etchant - Si (100) and (110) wafers - Dislocation etching
Chrome etchant - Au thin films and specimens - Chemical etching
Chrome etchant - Au-Cr thin films - Chemical etching
Chrome etchant - Cr thin films - Chemical etching
Chrome etchant - Cr2O3 amorphous thin films - Chemical etching
Chrome etchant - For Cr thin films
Chrome etchants, modified - Cr thin film deposits on glass substrates
Chrome regia etchant - Fe + 15-30 Cr + 6-40 Ni + <5%
Chrome regia etchant - Si wafers both float zone ingot material and epitaxy thin film deposit
Chrome regia etchant - Si3N4 oxynitrides and SiO2 thin films - Chemical cleaning
Chrome regia etchant - Stainless steels - Chemical etching
Chromium - Chemical-Mechanical polishing
Chromium - Cr and Cr alloys
Chromium - Cr and Cr base alloys, Fe-Cr alloys and V
Chromium - Cr, Mo, Mo-Cr alloys (up to 80% Cr)
Chromium - Cr, Nb, and alloys
Chromium - Electrolytic etching
Chromium - Electrolytic etching
Chromium - Electrolytic and chemical etching
Chromium - Electrolytic etching
Chromium - Electrolytic etching
Chromium - Electrolytic etching and electrolytic thinning
Chromium - Electrolytic mechanical polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic thinning for electron microscopy
Chromium - Physical etching
Chromium - Physical etching
Chromium - Produces etch pits on surface near to (111)
Chromium - Ta, Nb, and their alloys, Cr and Cr silicide. Re silicide, W-Th alloys
Chromium - Attack polishing
Chromium - Attack polishing
Chromium - Chemical etching
Chromium - Cr and Cr base alloys
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Electrolytic polishing
Chromium - Good general-purpose elctrolyte
Chromium and chromium alloys - Electrolytic polishing
Chromium and chromium alloys - Electrolytic polishing
Chromium and chromium alloys - Electrolytic polishing
Chromium and its alloys - Electrolytic polishing
Chromium boride (CrB2) - Chemical etching
Chromium films - Chemical etching
Chromium films - Physical etching
Chromium oxide (Cr2O3) - Chemical etching
Chromium plating
Chromium silicide - Chemical etching
Chromium-Copper (Cr-Cu) - Electric contact material
Chromosulfuric acid - For polypropylene
Cl2 single crystal - Pressure
Co (0001) wafers- Co (0001) wafers and other orientations used in a structure study
Co (0001) wafers- Electrolytic polishing
Co (0001) wafers- Electrolytic polishing
Co alloys - Chemical etching
Co alloys - Chemical etching
Co alloys - Chemical etching
Co alloys - For cobalt oxides and sulphides
Co alloys - For grain boundaries - Co-97.2 Cu alloy
Co alloys - Revels oxide in sulphides
Co and Co alloys - Chemical etching
Co and Co alloys - Chemical etching
Co and Co alloys - Electrolytic polishing
Co and Co alloys - Electrolytic polishing
Co and Co alloys - Electrolytic polishing
Co and Co alloys - Electrolytic polishing
Co and Co alloys - Electrolytic polishing
Co and Co high-temperature alloys - Electrolytic etching
Co and Co-Al alloys - Chemical etching
Co and Co-Al alloys - Electrolytic etching
Co and Co-Fe alloys - Chemical etching
Co binder phase - Chemical etching
Co boride - Chemical etching
Co borides - Chemical etching
Co hard-facing alloys - Chemical etching
Co hard-facing alloys - Electrolytic etching
Co hard-facing alloys and Co high-temperature alloys - Electrolytic etching
Co high-temeprature alloys - Chemical etching
Co high-temperature alloys - Electrolytic etching
Co high-temperature alloys - Electrolytic etching
Co oxide (CoO) - Chemical etching
Co oxide (CoO) - Electrolytic thinning
Co oxide (CoO) - Physical etching
Co oxide (CoO) single crystal - Chemical etching
Co oxide single crystal - Chemical etching
Co oxide single crystal - Chemical etching and electrolytic thinning
Co silicide - Chemical etching
Co silicides - Chemical etching
Co sintered carbides - Chemical etching
Co specimens - Physical etching
Co spheres - Electrolytic polishing
Co superalloys - Chemical etching
Co-Al alloys - Chemical etching
Co-Al alloys - Electrolytic etching
Co-B alloys - Chemical etching
Co-B compounds - Chemical etching
Co-C-Si-W-Fe-Cr alloy - 64Co-1.2C-1.1Si-4.8W-0.25Fe-28.6Cr, Stellite 6
Co-Ce alloys (Co5Ce) - Chemical etching
Co-Ce-Al alloy - Co5CeAl0.2
Co-Ce-Cu-Fe alloy - Approx. Co(3.5)Fe(0.5)CuCe
Co-Ce-Ni alloy - Laves phase, Ce(Co(1-x)Ni(x))2 0<=x<=0.17
Co-Cr (40%)-Ni-Fe alloys - Electrolytic etching
Co-Cr alloys - Electrolytic etching
Co-Cr-C alloys - Chemical etching -
Co-Cr-C alloys - Co-25.3Cr-0.25C
Co-Cr-C alloys - Co-25/33 Cr-0.2/0.3 C
Co-Cr-C alloys - Co-41Cr-2.4C
Co-Cr-C alloys - Preferential etch for non-carbides
Co-Cr-Mo alloy - Electrolytic thinning by Bollmann technique
Co-Cr-Mo alloys - Chemical etching
Co-Cr-Mo alloys - Chemical etching
Co-Cr-Mo-(Nb) dental alloys - Electrolytic etching
Co-Cr-Mo-C alloy - Co-2>Cr-5.5Mo-0.15C
Co-Cr-Mo-C alloy - Hynes Stellite 21
Co-Cr-Mo-C alloy - Vitallium or H.S.21, Co-27/30Cr-5.5Mo-0.15/0.3C
Co-Cr-Mo-C-Mn-Fe-Ni alloy - Co-28.3Cr-5.4Mo-0.26C-0.66Mn-0.39Fe-0.12Ni
Co-Cr-Mo-Ni alloys - Chemical etching
Co-Cr-Mo-Ni alloys - Chemical etching
Co-Cr-Mo-Ni-C-Fe-Si-Mn alloy - Co-28.5Cr-6Mo-2.2Ni-0.3C-0.4Fe-0.4Si-0.5Mn, HS21 alloy
Co-Cr-Ni-Ta alloy - 35% Cr, 15% Ni, 6% Ta
Co-Cr-Ni-Ta carbide alloy - Co-15Cr-25Ni-13Ta
Co-Cr-Ni-W-Si-C alloy - Stellugine 778, Co-25/29Cr-1.3/22.5Ni-1.6/1.7C-8.5/11.5W-0.9/2.7Si
Co-Cr-Ta carbide alloy - Co-15Cr-13Ta
Co-Cr-W alloys - Chemical etching
Co-Cu-Ce alloys ((Co, Cu)5Ce) - Chemical etching
Co-Cu-Ce alloys ((Co, Cu)5Ce) - Electrolytic micro and chemical etching
Co-Cu-Fe-Sm alloy - Modified Co5Sm - Etch for sintered alloy
Co-Cu-Pr alloy - (Co, Cu)5Pr
Co-Dy-Ag alloy - Co5DyAg0.2
Co-Dy-Al alloy - Co5DyAl0.2
Co-Dy-Au alloy - Chemical etching
Co-Dy-C alloy - Co5DyC0.7
Co-Dy-Cr alloy - Co5DyCr0.2
Co-Dy-Cu alloy - Co5DyCu0.2
Co-Dy-Fe alloy - Co5DyFe0.2
Co-Dy-Ga alloy - Co5DyGa0.2
Co-Dy-Ge alloy - Co5DyGe0.2
Co-Er-Al alloy - Co5ErAl0.2
Co-Fe alloy - Alloys with up to 11.2 at.% Fe
Co-Fe alloy - Electrolytic thinning
Co-Fe alloy - Fe-24-28% C
Co-Fe alloys - Chemical etching
Co-Fe alloys - Chemical etching
Co-Fe single crystal - Co-8 wt.% Fe
Co-Fe-Au alloys - Chemical etching
Co-Fe-C system - FeCo-0.5/2C
Co-Fe-Nb alloy - 85Co-12Fe-3Nb
Co-Fe-Nb alloy - 85Co-12Fe-3Nb
Co-Fe-Ni-V alloy - ((Fe,Co,Ni)3) - 30 at.% Fe, 37.5 at.% Co, 7.5 at.% Ni
Co-Fe-V alloy - ((Fe,Co)3V - 11/25% Fe - 64/50% Co - 25% V
Co-Fe-V alloy - 49 Co-47 Fe-3 V
Co-Fe-V alloy - FeCo-V
Co-Fe-V, Co-Ni-V, Co-Fe-Zn alloys - Chemical etching
Co-Fe-Zn alloys - Chemical etching
Co-Ga alloy - 48.5 at.% Ga
Co-Ga, Co-Fe-V, and Co-Ni-V alloys - Chemical etching
Co-Gd alloy - Laves phase GdCo2
Co-Gd alloys (Approx. GdCo) - Chemical etching
Co-Gd alloys - Chemical etching
Co-Gd-Al alloy - Co5GdAl0.2
Co-Ge-Si system - Chemical etching
Co-Hf alloys (HfCo2) - Chemical etching
Co-Ho-Al alloy - Co5HoAl0.2
Co-La-Al alloy - Co5LaAl0.2
Co-Mo alloys - Chemical etching
Co-Mo alloys - Electrolytic etching
Co-Nd-Al alloy - Co5NdAl0.2
Co-Ni-Al-Fe alloys - Chemical etching
Co-Ni-Cr alloy - Cu-29Ni-3Cr - Electrolytic thinning
Co-Ni-Cr carbide system - Co2Ni-Cr23C6
Co-Ni-Cr-Mo-C alloy (Vitallium) - >20%Co-26% Cr-6% Mo-0.4 or 1.0% C-Ni
Co-Ni-Cr-Nb-Al superalloy - 40Co-38Ni-17Cr-2.0Nb-1.5Al by weight
Co-Ni-Cr-Nb-Fe alloys - Electrolytic polishing
Co-Ni-Cr-Ta alloy - 29-31 wt.% Ni, 28-32% Co, 31-34% Cr, 3-11% Ta
Co-Ni-Cr-W-Fe alloy - Haynes No.25 Co-10Ni-20Cr-14W-3Fe (+C)
Co-Ni-Cr-W-Fe alloy - Stellite X40, Haynes 31 55Co-25Cr-10Ni-8W-1Fe (+C,Mn,Si)
Co-Ni-O system - Approx. (Co0.81Ni0.2)O
Co-Ni-V alloy - ((Co,Ni)3V - 32 at.% Co - 43Ni-25V)
Co-Pr alloy - Co5Pr
Co-Pr alloys - Chemical etching
Co-Pr-Al alloy - Co5PrAl0.2
Co-Pt alloys - Chemical etching
Co-Sb-Zr alloy - ZrSbCo - Aqua Regia
Co-Si alloy - Alloy with 11.8 at.% Si
Co-Si alloys - Chemical etching
Co-Si-Al alloys - Chemical etching
Co-Si-Ta alloy - Co-25at.% Si-5 at.% Ta
Co-Si-W alloy - Co - 25at.% Si - 5 at.% W
Co-Sm alloy - Co5Sm
Co-Sm alloy - Sintered Co5Sm
Co-Sm alloys - Chemical etching
Co-Sm alloys - Chemical etching
Co-Sm alloys - Chemical etching
Co-Sm alloys - Chemical etching
Co-Sm alloys, grain boundary etchant - Chemical etching
Co-Ta alloy - Co-Co2Ta eutectic
Co-Ti alloys - Chemical etching
Co-Ti in carbide system - Co-2.3/5 mol.% TiC
Co-V alloy - Co3V
Co-W alloys - Electrolytic etching
Co-Zr alloy - ZrCo
Co-Zr alloy - ZrCo2
Co-base casting material and rolling stock, stellite, color etchant - Chemical etching
Co-base superalloys, color etchant - Chemical etching
Co3S4 single crystal sphere - Chemical etching
CoFeO (100) wafers - Chemical etching
CoO (100) wafers- Chemical etching
CoO (100) wafers- Gas oxidation
CoO (100) wafers- Thermal processing
CoO - Chemical etching
CoO - Chemical etching
CoSi2 (100) wafers - Dislocation etching
CoSi2 thin film grown on substrates of Si, (111) and (100) - Chemical etching
CoSi2 thin films grown on Si substrates-Ionized gas, removal
Coated Hastelloy-X - Chemical etching
Coated cutting insert - Chemical etching
Coated steel sheet - Steel sheeet coated with Zn for automotive industry
Coates's etchant - Pb-Sn-Te alloys
Coates's etchant - Pb-Sn-Te alloys (Pb(1-x)Sn(x)Te, x <= 0.03) - Chemical polishing and etching
Cobalt - Cemented carbides with Co binder phase
Cobalt - Chemical polishing
Cobalt - Chemical polishing
Cobalt - Electrolytic etching
Cobalt - Electrolytic polishing
Cobalt - Electrolytic polishing
Cobalt - Electrolytic polishing
Cobalt - Electrolytic polishing
Cobalt - Electrolytic polishing
Cobalt - Electrolytic polishing
Cobalt - Electrolytic polishing
Cobalt Stellite - Chemical etching
Cobalt Stellite - Chemical etching
Cobalt Stellite - Electrolytic etching
Cobalt Stellite - Show grain size, general structure
Cobalt alloy - Co + dispersed oxides, TiO2, etc
Cobalt alloy - Co-Cr + dispersoids alloys
Cobalt alloys - Chemical etching
Cobalt alloys - Co silicide
Cobalt alloys - Co silicide
Cobalt alloys - Co-In + other alloys
Cobalt alloys - Co-In rich alloys
Cobalt alloys - Electrolytic polishing
Cobalt aluminate (CoAl2O4) - Chemical etching
Cobalt and alloys - Alpha or beta brass, Cu-Fe, Cu-Co, Co, Cd
Cobalt and alloys - Cemented carbides and other Co base alloys
Cobalt and alloys - Chemical ecthing
Cobalt and alloys - Chemical etching
Cobalt and alloys - Co base wear resistant alloys and materials used for cutting tools
Cobalt and alloys - Co-Fe alloys
Cobalt and alloys - Co-Ga alloys
Cobalt and alloys - Co-Sm alloys
Cobalt and alloys - Electrolytic polishing
Cobalt and alloys - Electrolytic polishing
Cobalt and alloys - Electrolytic polishing
Cobalt and alloys - Electrolytic polishing
Cobalt and alloys - Electrolytic thinning by window technique
Cobalt and alloys - Grain boundary etchant
Cobalt and alloys - Hexagonal Co - For optical and electron microscopy
Cobalt and alloys - Physical etching
Cobalt and alloys - Pure Co, Co base superalloys
Cobalt and alloys - Pure Co, Co-Al alloys
Cobalt and alloys - Pure Co, Co-Fe alloys, WC-TiC-NbC-Co type cemented carbides
Cobalt and alloys - Stellite up to 70% Co, Co base superalloys, Co silicides
Cobalt and alloys - WC-TiC-(Ta, Nb)C-Co tye cemented carbides
Cobalt and alloys - WC-TiC-NbC-Co type cemented carbides
Cobalt and alloys - WC-TiC-TaC-Co and WC-NbC-Co type cemented carbides
Cobalt and alloys - Worked + recrystallized Co
Cobalt and alloys - Worked + recrystallized Co
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt and cobalt alloys - Electrolytic polishing
Cobalt base alloys - Cobalt wrought alloys
Cobalt base alloys
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type)
Cobalt base alloys - Heat resistant high temperature (superalloys) (Co-Cr-X type), Hayness No, 1, 2, 3,4, 6 alloys
Cobalt base superalloy L605 - Chemical etching
Cobalt hard facings alloys - Chemical etching
Cobalt oxide (CoO) - Chemical etching
Cobalt single crystal - Chemical polishing
Cobalt wrought alloys - Chemical etching
Cobalt wrought alloys - Chemical etching
Cobalt wrought alloys - Chemical etching
Cobalt wrought alloys - Chemical etching
Cobalt wrought alloys - Electrolytic etching
Cobalt wrought alloys - Electrolytic etching
Cold-worked brass - Electrolytic etching
Cole and Brook's anodizing solution - Al alloys - Chemical etching
Color etch for U3Si - Chemical etching
Color etching Ni-Cr alloys - Chemical etching
Color tint etch for Mo - Chemical etching
Commercial Zn alloys - Chemical etching
Complex Mg alloys containing Al, Bi, Cd, Zn - Electrolytic etching
Contrast etchant - Ni-Al alloys
Cook's etchant - NaCl (100) wafers - Chemical etching
Coon's electrolytic etchant - Bi alloy and 5% Sb
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper (impure) - Dislocation etching
Copper (pure) - Dislocation etching
Copper - All types of Cu, cartridge brass, Tombac, Muntz metal, easily machinable brasses
Copper - Al bronzes which are difficult to etch otherwise
Copper - Al bronzes, Cu-Be alloys
Copper - All types of Cu, Cu-Be alloys
Copper - Alpha-beta brass, special brass, Al brass, red cast bronze, German silver, Cu-Sn alloys
Copper - An extremely useful electrolyte for certain applications, but dangerous
Copper - Attack polishing
Copper - Attack polishing
Copper - Attack polishing
Copper - Beta brasses, German silver, Monel and Cu-Ni alloys
Copper - Brasses, alpha bronze
Copper - Brasses, especially brasses containing Co
Copper - Cathodic etching
Copper - Cathodic etching
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing
Copper - Chemical polishing and etching
Copper - Chemical thinning
Copper - Color and grain contrast etchant for Cu
Copper - Color etchant and grain size contrast of bronzes
Copper - Cu, brasses, bronzes, Al bronzes, Cu-Ni and Cu-Ag alloys, German silver
Copper - Dislocation etching
Copper - Dislocation etching
Copper - Electrolytic etching
Copper - Electrolytic lapping
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing
Copper - Electrolytic polishing and thinning
Copper - Electrolytic thinning
Copper - Electrolytic thinning
Copper - Electrolytic thinning
Copper - Electrolytic thinning by window technique
Copper - Electrolytic thinning by Bollman technique
Copper - Electrolytic thinning by Mirand-Saulnier technique
Copper - Electrolytic thinning by modified voltage technique
Copper - Electrolytic thinning by window or Bollman technique
Copper - Electrolytic thinning by window technique
Copper - Electrolytic thinning by window technique
Copper - Electrolytic thinning by window technique
Copper - Electrolytic thinning in P.T.F.E. holder
Copper - Fast, good polish and etch for Cu and Cu with oxide and sulfide inclusions
Copper - For revealing the grain boundaries
Copper - Grain surface etching
Copper - Ion beam etching
Copper - Most types of Cu and Cu Alloys, Cu-Ag solder layers, Mn, P, Be, Al-Si bronzes
Copper - Multiple constituent Sn bronzes - Delta phase
Copper - Physical etching
Copper - Physical etching
Copper - Physical etching
Copper - Thinning of Cu wire for electron microscopy
Copper - This etchant reveals segregation structure and grain boundaries in 99.999% Cu
Copper alloys - Color etching - Enhances chemical contrast
Copper alloys - Color etching
Copper alloys - Color etching
Copper alloys - Electrolytic polishing
Copper alloys - Electrolytic polishing
Copper and copper alloys - Aluminium bronze, free-cutting brass
Copper and copper alloys - Aluminium bronze, free-cutting brass
Copper and copper alloys - Attack polishing of Copper and some copper alloys
Copper and copper alloys - Attack polishing of brasses and bronzes
Copper and copper alloys - Beryllium copper and aluminium bronze
Copper and copper alloys - Cartridge brass, free-cutting brass, admirality, gilding metal
Copper and copper alloys - Chemical etching
Copper and copper alloys - Chemical etching
Copper and copper alloys - Cold worked brasses
Copper and copper alloys - Copper alloys of Be, Mn, and Si; nickel silver; bronzes, chromium copper
Copper and copper alloys - Copper, brasses, bronzes, aluminium bronzes
Copper and copper alloys - Copper, brasses, bronzes, nickel silver
Copper and copper alloys - Copper, brasses, bronzes, nickel silver
Copper and copper alloys - Copper, brasses, bronzes, nickel silver, Al bronze
Copper and copper alloys - Copper, brasses, nickel silver; darkening large areas of beta in alpha-beta brass
Copper and copper alloys - Copper-nickel alloys
Copper and copper alloys - Electrolytic etching
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Electrolytic polishing
Copper and copper alloys - Especially for copper and brass - For revealing the microstructure
Copper and copper alloys - Etching and attack polishing of Copper and Cu alloys
Copper and copper alloys - For Cu-Sn Alloys
Copper and copper alloys - For copper an alpha brass
Copper and copper alloys - For copper and alpha brass
Copper and copper alloys - For nickel silver and bronzes
Copper and copper alloys - Good contrast between tha alpha phase and beta phase in brass
Copper and copper alloys - Jet electrolytic polishing (0.1 cm jet)
Copper and copper alloys - Jet electrolytic polishing (0.15 cm jet) of discs
Copper and copper alloys - Jet machinning
Copper and copper alloys - To reveal the (100) texture in copper
Copper and copper alloys - To reveal the (100) texture in copper
Copper and copper alloys except Tin-bronze - Electrolytic polishing
Copper and copper base alloys - Electrolytic polishing
Copper base alloys - Color etchant
Copper britte dip etchant - Cu specimens and parts - Chemical polishing
Copper chloride (CuCl) - Chemical etching
Copper dislocation etchant - Si single crystal wafers of different orientations - Chemical etching
Copper etchant - Si (111) wafers and other orientations - Chemical etching
Copper polyerystalline parts - Chemical cleaning
Copper single crystal - Chemical etching
Copper single crystal - Chemical polishing, electrolytic etching, etch pit etching
Copper single crystal - Electrolytic etching for etch pits
Copper single crystal - Electrolytic polishing
Copper single crystal - Etching for etch pits
Copper single crystals - Electrolytic polishing
Copper specimens - Chemical etching
Copper specimens - Chemical etching
Copper thin films - Chemical etching
Copper, brasss, bronzes - Electrolytic polishing
Copper, brasss, bronzes - Electrolytic polishing
Copper-Cobalt-Beryllium (Cu-Co-Be) - Electric contact material
Copper-Cobalt-Beryllium (Cu-Co-Be) - Electric contact material
Copper-Cobalt-Silicon (Cu-Co-Si) - Electric contact material
Copper-Cobalt-Silicon (Cu-Co-Si) - Electric contact material
Copper-Graphite (Cu-C) - Electric contact material
Copper-Tungsten (Cu-W) - Electric contact material
Corke and Amelincky's electropolish solution - Cu-Pt alloy - Electrolytic etch
Corning glass #7059 - Acid, float-off
Corning glass #7059 used as substrates for a-ZnGeAs2 epitaxy - Solvent cleaning
Corning glass 7720 - Chemical cleaning
Corning glass 7720 - Chemical cleaning
Corning glass 7740 (borosilicate) - Chemical cleaning
Coronze CDA 638 alloy - Electrolytic thinning
Corrosion resistant cast steel HU - The composition is 37-41% Ni, 17-21% Cr, 2.5% max. Si, 0.35-0.75% C
Cr and Cr alloys - Chemical etching
Cr and Cr alloys - Chemical etching
Cr and Cr alloys - Electrolytic etching
Cr and Cr alloys - Electrolytic etching
Cr and Cr alloys - Electrolytic etching
Cr and Cr alloys - Electrolytic etching
Cr and Cr alloys - Electrolytic etching
Cr and Cr alloys, C-Fe alloys, Mo (grain-contrast etchant), Re and Re-base alloys, V and V-base alloys - Electrolytic etching
Cr and CrNi steels - Electrolytic etching
Cr and Hf carbides - Chemical etching
Cr and Mo carbides - Chemical etching
Cr as evaporated deposits in vacuum systems - Chemical cleaning
Cr as evaporated deposits in vacuum systems - Chemical cleaning
Cr carbide-Ni alloy - 83% carbide-15% Ni
Cr evaporated thin films - Chemical etching
Cr evaporation deposits - Chemical etching
Cr specimens - Chemical etching
Cr steel - Fe-0.9/1.5C-1/8Cr
Cr steel specimens - 0.4.1.0 C-3.6 Cr-Fe
Cr steels - Electrolytic etching
Cr steels - Fe-4Cr-0.25/0.35C
Cr steels specimen - Fe-4Cr-0.3C
Cr thin films - Chemical etching
Cr thin films - Gas oxidation
Cr thin films - Physical etching
Cr thin films deposits - Chemical etching
Cr, Mo, Nb, Ta, V, W and their alloys - Chemical-Mechanical polishing
Cr-Alumina alloy (Al2O3) - 70% Cr-30% Al2O3
Cr-Fe alloy - Electrolytic thinning
Cr-Fe alloy - Fe-24/25Cr - Electrolytic thinning
Cr-Hf carbide - 0.5 mol % HfC
Cr-Ir alloys - Chemical etching
Cr-Mo alloys (Mo-rich) - Chemical etching
Cr-Mo steel - Electrolytic etching
Cr-Mo steel - Fe-0.05C-10Cr-2Mo-0.5Mo-0.5Mn-0.4/0.6Si
Cr-Mo steel - Fe-0.1C-2.2Cr-0/1.5Mo
Cr-Mo steel - Fe-0.1C-2.3Cr-1Mo
Cr-Mo-Nb-V steel - Fe-0.05C-10Cr-2Mo-0.2V-up.to 0.1Nb-0.5Mn-0.4/0.6Si
Cr-N system (Cr-rich) - Chemical etching
Cr-Nb alloys - Chemical etching
Cr-Nb carbide - 0.5 mol % NbC
Cr-Nb-Zr-C alloy - 0.7% Zr, 1.0% Nb, 0.04% C
Cr-Ni stainless steels - Chemical etching
Cr-Ni-Si steel - Fe-0.3C-1.7Cr-3.5Ni-0.6Si
Cr-Re alloy - Thinning for electron microscopy
Cr-Rh system - Electrolytic etching
Cr-Ru alloys - Electrolytic etching
Cr-Sc alloy - May be examined unetched
Cr-Si alloys (2-76 wt.% Si) - Attack polishing
Cr-Si system - For alloys with up to 40 at.% S and over
Cr-Ta boride - Chemical etching
Cr-Ta carbide - 0.5 mol % TaC
Cr-Ti carbide - 0.5 mol % TiC
Cr-Ti carbide - Chemical etching
Cr-Ti steel - Fe-4Cr-0.25/0.35C-0/0.2Ti
Cr-W - Attack polishing
Cr-W alloy - Alloys with 29-40 at.% W
Cr-Y alloy - May be examined unetched
Cr-Zr carbide - Chemical etching
Cr-Zr carbide -0.5 mol % ZrC
Cr-Zr-C alloys - Electrolytic etching
Cr2O3 (0001) and (1011) wafers- Chemical etching
Cr2O3 (0001) wafers- Chemical etching
Cr2O3 (111) single crystal - Material growth
Cr2O3 and Al2O3 - Chemical etching
Cr2O3 thin film - Chemical etching
Cr3B2 specimens - Chemical etching
Cr3B2 specimens - Chemical etching
Cr3B2 specimens - Chemical etching
CrB2 specimens - Chemical etching
CrB2, MoB2 - Chemical etching
CrC and HfC - Chemical etching
CrSi2 thin films deposited on silicon substrates - Gas oxidation
Crowell's etchant - Ag-Sn-Zn-Cu alloys, Cu-Sn-Ag dental alloys
Crowell's etchant - Ag-Sn-Zn-Cu dental amalgam alloys - Chemical etching
Crowell's etchant - Cu-Sn-Ag dental alloys - Chemical etching
Crowell's etchant - Cu-Sn-Ag dental alloys - Chemical etching
Cs metal specimens - Chemical etching
Cs2O (111) wafers - Chemical cleaning
CsBr (001) wafers - Alcohol polishing
CsCl single crystal - Chemical etching
CsI (100) oriented single crystal wafers - Chemical polishing/etching
Cu (100) wafers - Chemical polishing
Cu (111) single crystal - Chemical cleaning
Cu (111) single crystal wafers - Dislocation etching
Cu (111) wafers - Electrolytic polishing
Cu (111) wafers - Gas cleaning
Cu (111) wafers- Chemical etching
Cu (111) within 2-3? orientation - Dislocation etching
Cu (1O0) single crystal wafers - Gas removal
Cu (OFHC), Cu-30% Zn alloy - Dislocation etching
Cu OFHC copper specimens - Chemical etching
Cu alloys, Cu-Si alloys - Chemical etching
Cu alloys, brasses, Cu-Be alloys, Al bronzes without eutectoid, Alpaca - Chemical etching
Cu and Cu alloy parts - Chemical etching
Cu and Cu alloy specimens - Chemical etching - General etchant
Cu and Cu alloys - Chemical cleaning
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical etching
Cu and Cu alloys - Chemical polishing
Cu and Cu alloys - Chemical polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys - Electrolytic polishing
Cu and Cu alloys as sheet or foil - Chemical cleaning
Cu and Cu alloys except Sn bronze - Electrolytic polishing
Cu and Cu alloys, Be bronzes - Chemical etching
Cu and Cu-Zn and Cu-Sn alloys - Chemical etching
Cu and Cu-base alloys - Electrolytic polishing
Cu and alloy - For copper, brass and nickel silver
Cu and alloy parts - Chemical etching
Cu and alloys - Chemical etching
Cu and alloys - Chemical etching
Cu and alloys - Chemical etching
Cu and alloys - Chemical etching
Cu and alloys - Chemical etching
Cu and alloys - Chemical etching
Cu and alloys - Chemical etching
Cu bicrystals - Chemical etching
Cu brases, bronzes - Chemical etching
Cu cryogenic trailer piping - Chemical cleaning
Cu ferrite - CuO 0.33/2.5 Fe2O3
Cu oxide (Cu2O) - Chemical polishing, thinning
Cu oxide - Chemical polishing, thinning
Cu oxides - Chemical ecthing
Cu oxides - Chemical etching
Cu oxides-single crystals - Chemical polishing
Cu parts as sheet, pans and piping - Mineral cleaning
Cu piping - Chemical cleaning
Cu piping on cryogenic transport tailers - Chemical cleaning
Cu single crystal ingots - Chemical etching
Cu single crystal specimens - Acid cleaning
Cu single crystal specimens - Chemical etching
Cu single crystal specimens - Chemical etching
Cu single crystal specimens - Chemical polishing
Cu single crystal specimens - Chemical polishing
Cu single crystal specimens - Chemical polishing
Cu single crystal specimens - Electrolytic polishing
Cu single crystal specimens - Electrolytic polishing
Cu single crystal specimens - Electrolytic polishing
Cu single crystal specimens - Physical etching
Cu single crystal sphere - Acid oxidation
Cu single crystal sphere - Chemical etching
Cu single crystal sphere - Gas, preferential
Cu single crystal spheres - Electrolytic polishing
Cu single crystal spheres - Electrolytic polishing
Cu single crystal spheres - Electrolytic polishing
Cu single crystal spheres - Electrolytic oxide removal
Cu single crystal spheres - Salt, removal/preferential
Cu single crystal spheres - Acid oxidation
Cu single crystal spheres - Gas, preferential
Cu single crystal spheres - Thermal forming
Cu single crystal spheres - Thermal forming
Cu single crystal wafers - Chemical etching
Cu single crystal wafers - Chemical etching
Cu single crystal wafers - Dislocation etching
Cu single crystal wafers of various orientations - Dislocation etching
Cu single crystals - Chemical cleaning
Cu single crystals - Deformation
Cu specimens - Acid cutting
Cu specimens - Chemical etching
Cu specimens - Chemical etching
Cu specimens - Chemical etching
Cu specimens - Chemical polishing
Cu specimens - Electrolytic polishing
Cu specimens - Electrolytic polishing
Cu specimens - Gas corrosion
Cu thin films evaporated on NaCl - Acid, float-off
Cu wire and OFHC copper parts - Chemical polishing/cleaning
Cu wire and coupons - Chemical cleaning
Cu, 25% Pb, 0.75% Ag alloy - Chemical etching
Cu, alpha brass - Chemical polishing
Cu, brass (high Zn content) - Attack polishing
Cu-30% Zn alloy - Attack polishing
Cu-30% Zn alloy - Dislocation etching
Cu-30% Zn alloy - Dislocation etching
Cu-35% Zn alloy - Dislocation etching
Cu-4.85% Si alloy - Chemical polishing
Cu-48.9% alloy (atomic %) - Dislocation etching
Cu-8% Al alloy, Cu-0.5% Be alloy, Cu-5% Al-2% Si alloy - Chemical polishing
Cu-Ag alloy - Alloy with 20 wt % Ag
Cu-Ag alloy - Electrolytic thinning
Cu-Ag alloys - Grain boundary etching (primary and deformed)
Cu-Ag-Al alloy - Electrolytic polishing
Cu-Ag-Ni alloy - 23Cu-75Ag-2Ni
Cu-Al alloy - Alloys with 5.5-7.5% Al
Cu-Al alloy single crystal - Alloy with 0.3-0.7 at.% Al
Cu-Al alloys (to 50%) - Dislocation etching
Cu-Al and Cu-Be alloys - Electrolytic etching
Cu-Al system - Electrolytic thinning by Bollmann technique
Cu-Al-Fe alloy - Alloy with 9% Al and up to 4% Fe
Cu-Al-Fe alloy - Ampco 8 6.3% Al, 2-5% Fe
Cu-Al-Mn system - Electrolytic thinning
Cu-Al-Ni alloy - 82-83% Cu, 14-15% Al, 3% Ni
Cu-Al-Ni alloy - Chemical polishing
Cu-Al-Ni alloys - Chemical etching
Cu-Al-Ni-Fe alloy - Cu-10Al-5Ni-5Fe
Cu-Al-Si-Co alloy - Coronze CDA 638 95Cu-2.8Al-1.8Si-0.4Co
Cu-Al-Ti alloy - Cu-2% Ti-2.3-5% Al
Cu-Al-Ti alloy - Cu-9.5Al-0.75/2.5Ti
Cu-As alloys - Chemical etching
Cu-Au alloys - Chemical etching
Cu-Au alloys - Electrolytic polishing
Cu-Au alloys - Electrolytic polishing and micro etching
Cu-Au alloys - Electrolytic polishing and micro etching
Cu-Au alloys - Electrolytic thinning
Cu-Au alloys - Electrolytic thinning
Cu-Au alloys - Electrolytic thinning
Cu-Au alloys - Primary etching (cast structures, segregation)
Cu-Au alloys - Secondary etching
Cu-Au and Cu-Au-Zn alloys - Electrolytic polishing
Cu-Au single crystal (Cu3Au) - Electrolytic polishing
Cu-B alloys - Chemical etching
Cu-Be alloys - Chemical etching
Cu-Be alloys - Chemical etching
Cu-Be alloys - Electrolytic thinning
Cu-Be alloys - Electrolytic thinning
Cu-Be alloys - Electrolytic thinning
Cu-Be alloys - Electrolytic thinning by Bolmann technique
Cu-Be alloys - Electrolytic thinning by Mirand-Saulnier technique
Cu-Be spring shim stock - Chemical cleaning
Cu-Be-Co alloys - Cu-2% Be-0.3% Co
Cu-Be-Ni alloy specimens - Chemical etching
Cu-Bi alloys - Electrolytic etching
Cu-Ce alloy - Electrolytic and chemical etching
Cu-Co alloy - Alloy with 2 at.% Co
Cu-Co alloy - Alpha or beta brass, Cu-Fe, Cu-Co, Co, Cd
Cu-Co alloy - Cast alloys <= 7 at.% Co
Cu-Co alloy - Cu-2/3% Co
Cu-Co alloy - Electrolytic thinning
Cu-Cr alloy - Alloys with < at.% Cr
Cu-Cr eutectic alloy - Chemical etching
Cu-Cr-Zr alloy - Chemical etching
Cu-Fe alloy - Alloy with < 5.5 at.% Fe
Cu-Fe alloy - Alloy with 2.5% Fe - Physical etching
Cu-Fe alloy - Alloy with 50% Cu
Cu-Fe alloy - Alpha or beta brass, Cu-Fe, Cu-Co, Co, Cd
Cu-Fe single crystal - Up to 1.58 wt.% Fe
Cu-Fe, Cu-Co alloys - Electrolytic polishing
Cu-Fe-Ni alloy - 19Cu-61Fe-20Ni
Cu-Fe-Ni alloy - Electrolytic thinning by window technique
Cu-Ga - In selenide-CuGa(x)In(1-x)Se2
Cu-Ga alloy - Alloys with < 14.5 at.% Cu - Chemical polishing
Cu-Ga alloy - Beta phase quenched alloys
Cu-Ga alloy specimens - Chemical etching
Cu-Ga alloy specimens - Chemical etching
Cu-Ga alloys - Chemical polishing
Cu-Ga sulphide (CuGeS2 single crystal) - Chemical etching
Cu-Ga-Zn alloy - Cu-20.4 at.% Zn-12.5 at.% Ga
Cu-Ge alloy - Alloy with 6 at.% Ge - Electrolytic polishing
Cu-Ge alloy - Alloy with 8.5 at.% Ge - Chemical thinning
Cu-Ge alloy - Alloys with < 9.5 at.% Ge - Chemical polishing
Cu-Ge alloy - Electrolytic polishing
Cu-Ge alloy - Electrolytic thinning
Cu-Ge alloy - Electrolytic thinning by window technique
Cu-Ge alloys - Electrolytic polishing
Cu-Ge alloys - Electrolytic polishing
Cu-Ge alloys - Electrolytic polishing
Cu-Ge oxide system - Cu-GeO2 - Electrolytic polishing
Cu-Ge-Sn alloys - Chemical etching
Cu-In alloy - Alloy with 9% In - Chemical etching and electrolytic thinning
Cu-In alloy - Electrolytic thinning by window technique
Cu-In eutectoid-31.4% In
Cu-In-Se (CuInSe2) - Chemical polishing
Cu-In-Se (CuInSe2) - Chemical polishing
Cu-In-Se single crystals (CuInSe2) - Chemical etching - Aqua Regia
Cu-In-Te - Chemical etching
Cu-Mg alloy - Electrolytic thinning
Cu-Mg-Ca alloys - Chemical etching
Cu-Mn alloy - Alloys with < 50 at.% Mn
Cu-Nb alloy - Cu-15-20Nb
Cu-Nb-Sn system - Cu-0.3/1.0Nb-0.2/0.5Sn
Cu-Ni alloy - Electrolytic thinning
Cu-Ni alloy - Electrolytic thinning by window technique
Cu-Ni alloys - Electrolytic etching
Cu-Ni alloys - Physical etching
Cu-Ni-Al alloys - Chemical etching
Cu-Ni-Co alloys - Chemical thinning
Cu-Ni-Cr alloy - Cu-32Ni-2Cr - Electrolytic thinning
Cu-Ni-Fe alloy - Cathodic etching
Cu-Ni-Fe alloy - Chemical and electrolytic polishing
Cu-Ni-Fe system - 32-64% Cu, 27-46% Ni, 9-23% Fe
Cu-Ni-Fe system - 50/70 at.% Cu - 33/19 at.% Ni - 15/11 at.% Fe
Cu-Ni-Mn alloy - Cu-20Ni-20Mn
Cu-Ni-Nb alloy - Cu-30Ni-1Nb
Cu-Ni-Sn alloy - Cu-15Ni-8Sn
Cu-Ni-Ti alloy - 27/47Ni-7/29Cu-44/46Ti - TiNixCu(1-x)
Cu-Ni-Ti alloy - Cu-5Ni-2.5Ti
Cu-Ni-Ti alloy - Jet electrolytic thinning - Cu-5-16Ni-4-4.5Ti
Cu-Ni-Zn alloys - Chemical etching
Cu-Ni-Zr alloy - Ni-30Cu+0.2Zr - alloy Monel
Cu-P alloy - Cu-5-10% P
Cu-Pb alloy - Selective etchant to allow SEM examination
Cu-Pb alloys - Attack polishing
Cu-Pb alloys - Good up to 30% Pb
Cu-Pd thin film - Chemical etching
Cu-Pt alloy - Chemical etching
Cu-Pt alloy - Electrolytic thinning as Corke
Cu-Pt alloy - Electrolytic thinning by window technique
Cu-Si alloy - Cu-0.24% SiO2
Cu-Si alloy - Electrolytic thinning
Cu-Si alloys - Chemical etching
Cu-Si alloys - Electrolytic polishing
Cu-Si system - Electrolytic thinning by Bollman technique
Cu-Si system - For alloys with 1% Si - Dislocation etch
Cu-Si system - For alloys with 17-25 at.% Si
Cu-Si-Zn alloy - Copper rich alloys
Cu-Si-Zn alloys - Chemical etching
Cu-Sn (30%) standard bronze - Chemical etching
Cu-Sn alloy - Electrolytic thinning by modified Mirand-Saulnier technique
Cu-Sn alloy - Electrolytic thinning by window technique
Cu-Sn alloys - For alloys with 5 at.% Sn - Electrolytic polishing
Cu-Sn-As alloys - Chemical etching
Cu-Sn-Zn alloy - Cu-34 wt.% Zn-4% Si
Cu-Te alloy - Electrolytic thinning
Cu-Ti alloy - Cu-1% Ti - Electrolytic polishing
Cu-Ti alloys - Electrolytic polishing
Cu-Ti alloys - For alloys with < 5 wt.% Ti
Cu-Ti alloys - For alloys with < 9.5 at.% Ti
Cu-Ti alloys - For alloys with 1-4% Ti
Cu-V alloy - For alloys with < 14.7 at.% V and > 94 at.% V
Cu-W composite - Electrolytic polishing
Cu-Zn alloy - 52.55 at.% Cu - 48.45 at.% Zn
Cu-Zn alloy - 58 at % Cu - 42 at.% Zn
Cu-Zn alloy - Alloys with low Zn content
Cu-Zn alloy - Alloys with up to 35% Zn
Cu-Zn alloy - Copper and Cu-Zn alloys
Cu-Zn alloy - Electrolytic polishing
Cu-Zn alloy - Electrolytic thinning
Cu-Zn alloy - Electrolytic thinning by Bollmann technique
Cu-Zn alloy - Electrolytic thinning by window technique
Cu-Zn alloy - Electrolytic thinning by window technique
Cu-Zn alloy - Zn rich alloys
Cu-Zn alloy specimens - Chemical etching
Cu-Zn alloys (90-10 brass) - Chemical etching
Cu-Zn alloys (alpha-brass) - Chemical etching
Cu-Zn alloys (alpha-brass) - Electrolytic polishing
Cu-Zn alloys (gamma brass) - Electrolytic thinning
Cu-Zn alloys - Electrolytic etching
Cu-Zn alloys - Electrolytic polishing
Cu-Zn alloys - For alloys with < 30 at.% Zn
Cu-Zn alloys - For alloys with 38% Zn
Cu-Zn-Al alloy - 47Cu-21Zn-2Al
Cu-Zn-Al alloy - Chemical etching
Cu-Zn-Al alloy - Cu68Zn15Al17
Cu-Zn-Al alloy - Electrolytic thinning and polishing
Cu-Zn-Be alloys - Cu-20/30% Zn-0.11% Be - Chemical thinning and electrolytic polishing
Cu-Zn-Ga alloys - Electrolytic polishing
Cu-Zn-Mn alloy - 44-48% Zn, 1-4% Mn
Cu-Zn-Ni alloy - 45-48% Zn, 2-5% Ni
Cu-Zn-Ni alloy - IN 836 48Cu-37Zn-15Ni
Cu-Zn-Ni-Mn alloy - Alloy IN 629 Cu-28Ni-15Ni-13Mn. alloy IN 836 Cu-38Zn-16Ni-0.1Mn
Cu-Zn-Ni-Mn alloy - Alloy IN 829 44Cu-28Zn-15Ni-13Mn
Cu-Zn-Sn alloy - 64 at.% Cu-33.5 at.% Zn-2.5 at.% Sn
Cu-Zn-Sn alloy - No etching
Cu-Zr alloy (CuZr) - Chemical etching
Cu-Zr alloys - Chemical etching
Cu-Zr alloys - For alloys with 40 wt.% Zr
Cu20 thin films - Acid oxidation
Cu2O native oxide-Oxide removal
Cu2O as a native oxide - Chemical etching
Cu2O as a native oxide on copper surfaces - Acid removal
Cu2O as a native oxide thin film on surfaces - Oxide removal
Cu2O material - Chemical polishing
Cu2O specimens - Chemical etching
Cu2O thin films - Chemical cleaning
Cu2Sb and SbAu2Sb specimens - Chemical etching
Cu3Au single crystal specimens - Electrolytic polishing
Cu3Au single crystal specimens - Electrolytic polishing
Cu4Te3 specimens - Chemical etching
Cu6PS3-halogens - Chemical etching
Cu6PS5-I single crystal - Chemical etching
CuBr single crystals - Chemical polishing
CuCl single crystals - Chemical polishing
CuGaS2 single crystals - Chemical cleaning
CuGaSe3 single crystal - Chemical etching
CuGaTe2 single crystals - Chemical etching
CuGe2P3 single crystal ingots - Chemical etching
CuI single crystals - Chemical polishing
CuInS2 (112) wafers - Dislocation etching
CuInS2 (112) wafers - Dislocation etching
CuInS2 (112) wafers - Dislocation etching
CuInS2 n-type wafers - Chemical polishing
CuInS2 n-type wafers - Photo etch-polishing
CuInS2 wafer - Chemical polishing
CuInS2 wafers - Chemical etching
CuInSe2 p-type wafers - Chemical cleaning
CuInSe2 single crystal - Chemical polishing/staining
CuInSe2 wafers - Chemical etching
CuInTe2 single crystals - Chemical etching
CuInTe2 thin films - Acid, float-off
CuInTe2 thin films - Chemical thinning
CuNi single crystal specimens - Chemical etching
CuS specimens - Chemical etching
CuZn (30%) specimens - Chemical etching
CuZn (30%) specimens - Chemical etching
Curan's etchant - Stainless steels - Chemical etching
Czochralski's - Antimony specimens - Grain contrast etch
Czochralski's etchant - Antimony - Chemical etching
Czochralski's etchant - Sb alloys
D (100), (111), and (110) oriented wafers - Physical etching
D (111) oriented small parts - Detergent cleaning
D (111) platelets - Physical etching
D (111) single crystal specimens - Thermal processing
D (111) specimens - Sample preparation
D (111) wafers - Chemical cleaning
D (111) wafers - Ionized gas
D (111) wafers - Metal, implatantion
D, fabricated as artificial diamond
D43 alloy - Nb-10W-12V-0.1C
DE-100 etchant - SiO2 thin films deposited by Silox system method on (100) silicon and GaAs-Cr (SI) wafers - Ionized gas etching
Dash etchant - Sb (0001) specimen
Dash etchant - Sb (0001) specimen cleaved in LN2
Dash etchant - Sb (0001) specimen cleaved in LN2
Dash etchant - Sb (OOO1) specimen
Dash etchant, modified - Sb (0001) specimen cleaved in LN2
Dash etchant, modified - Sb (0001) specimen cleaved in LN2
Dash's copper decoration etchant - Si (111) wafers - Metal difusion
Dash's etchant - Si (111) wafers and other orientations, both n- and p-type of different resistivity levels
Dash's etchant, modified - Si (100), (111), (110) and (112) wafers
Dash's etchant, modified - Si (111) wafers - Chemical etching
Delta Pu and alloys - Electrolytic etching
Delta ferrite phase in 316LS austenite stainless steel - Electrolytic etching
Deutron - Particle, transmutation
Diamond
Dickenson's etchant - Fe-As alloys - For alloys with 0.6 - 4.6 at.% As
Dickenson's etchant - For cast steels
Different steels - Chemical etching
Disapol A2 electrolyte
Disapol D2 electrolyte
Disapol D2 solution
Dispersion strengthened ceramics - Thermal etching
Dix-Keller's etchant - Foamed Al, Al alloys, Al-Zr-Ti alloys
Dix-Keller's etchant - For most Al types and alloys except for Al alloys with high Si content, Al foils - Chemical etching
Dix-Keller's etchant - Pure Al and Al alloys
Doped ZnO-ZnO-0.5 mole % each of Bi2O3, CaO, MnO, SnO2
Dow's etchant
DuPont Nb etchant - Nb-Hf and Nb alloys - Chemical etching
Dual phase steel etchants - Chemical etching
Duaraluminium and Al cast alloys - Chemical etching
Dunn's method for revealing crystal orientation in Ta - Electrolytic etching
Duplex stainless steel - Selective etching
Duplex stainless steel - Selective etching
Duraluminium - Cathodic etching
Duraluminium - Chemical etching
Dy as single crystal spheres - Chemical etching
Dy-, Er-, Ho-, La-base alloys, RE-Co alloys - Chemical etching
Dy-Ag alloys - Chemical etching
Dy-Al alloy - Anodising
Dy-Au alloys - Chemical etching
Dy-Bi system - Chemical etching
Dy-Er alloy - Electolytic polishing and etching
Dy-Ho alloys - Electrolytic polishing and etching
Dy-Pb system - Electrolytic polishing
Dy-Pd alloys - Chemical etching
Dysprosium - Chemical etching
Dysprosium - Dy, Er, Gd, Ho base allyos, Rare Earths - Co alloys
Dysprosium - Electrolytic polishing
Dysprosium - Polishing and chemical etching
Dysprosium oxide-zirconia system (Dy2O3 x ZrO2) - Chemical etching
E etchant - Ni superalloys
E etchant - Zn (0001) wafers - Chemical etching
EAg1 etchant - CdTe (100), (111) and (110) wafers - Chemical etching
EAg2 etchant - CdTe (100), (111), and (110) wafers - Chemical etching
EBSD sample preparation - All materials - Dislocation etching
EDP etchant for single crystal silicon - Chemical etching
EDP etching of silicon wafers I - Chemical etching
EDP etching of silicon wafers II - Chemical etching
EDTA etchant - CaCO3 r(1011) cleaved wafers - Acid cleaning
EDTA etchant - Li-alumina-silica glass - Li2O x Al2O3 x SiO2
EI-IR etchant - Steels for high temperatures
EPW etchant - Si (111) and (100), p-type 1 - 10 Ohm cm and n-type wafers - Chemical etching
Electroless Ni - For revealing the grain structure
Electrolyte A2
Electrolyte V2A 'Micro'
Electrolytes for TEM preparation od intermetallics
Electrolytic etching in chlorhydric acid - Martensitic chromium steels - Electrolytic etching
Electrolytic polishing NiTi alloys
Electrolytic polishing of pure titanium - EBSD sample preparation
Ellis's No. 1 etchant - Ge spheres and hemispheres - Chemical etching
Ellis's No. 5 etchant - Ge spheres and hemispheres - Chemical etching
Ellis's No. 7 etchant - Ge spheres and hemispheres - Ge spheres and hemispheres
Emanuel's etchant - Cast steels - Chemical etching
Emanuel's etchant - Fe-Ni-Cr heat resistant casting alloy - Attacks sigma phase with little or no effect on carbide particles
Ence and Margolin's etching solution (H-etch) - Ti alloys - Electrolytic etching
Epsilon phase in Pb-Sb-Sn alloys - Chemical etching
Er as an evaporated thin film - Chemical etching
Er single crystal specimens - Thermal processing
Er-Ag alloys - Chemical etching
Er-Al alloys - Anodise
Er-Au alloys - Chemical etching
Er-Bi system - Chemical etching
Er-Fe system - Chemical polishing
Er-Ho alloys - Electrolytic polishing and chemical etching
Er-Tb alloys - Electrolytic polishing and chemical etching
Er-Y alloys - Electrolytic polishing and chemical etching
ErH2 and ErH3 - Acid, float-off
ErSi2 thin films grown on Si (100) - Thermal forming
Erbium alloy - Dy, Er, Gd, Ho base allyos, rare earths-Co alloys
Erbium alloy - Polishing, chemical etching
Erbium alloys - Electrolytic polishing
Erbium hydride (ErH2) - Chemical etching
Erhard's etchant - Si (111) wafers - Dislocation etching
Etch pits etchant - Nickel oxide (NiO)
Etch pits etchant - Selenium
Etch-polish of 304 stainless steel - Dislocation etching
Etchant No. 2 - InSb (100) and (110) wafers - Chemical etching
Etchant for 316 SS Coreloy - This etchant should reveal the general microstructure
Etchant for ZnO varistor materials - For etching commercial ZnO varistors
Etchant for copper wire - Chemical etching
Etchant for delta ferrite in stainless steels - Chemical etching
Etchant for neodymium - Chemical etching
Etchant for titanium aluminide - Chemical etching
Etchant of del Corral and de Castro y Mosquera - Temper embrittlement in steels - Chemical etching
Etchants for Inconel-X alloy
Etchants for ZK60 Mg alloy - Chemical etching
Etchants for revealing prior austenite grain in alloy steels
Etches the (100) texture of Cu - Chemical etching
Etching 14k Gold - For alloy with 70% Cu, 20% Ag, 10% Zn and also some amount of Si
Etching Rene 80 alloy - Electrolytic etching
Etching agent for 80Ni-20Fe - Chemical etching
Etching for grain boundaries in microalloyed steel
Etching of Zr-10% Ag - Chemical etching
Etching of gold - Chemical and electrolytic etching
Etching on a 90% Pb-Sn - Grain bondaries etching
Eu-Ag alloys - Chemical etching
Eu-Pb system - Electrolytic polishing
Eu-Zr system - Chemical etching
Eu2O3 - Chemical etching
Eu2O3 specimens - Chemical etching
Eu3Sc2Fe3OI2 single crystal
Europium - Electrolytic polishing
Europium
Europium - The method of Roman can be used for polishing and etching
Europium oxide (Eu2O3) - Chemical etching
Eutectoid steel - Fe-0.8C-0.5Mn-0.2Si
Evans etchant - Inconel 617 - Chemical etching
Evidence of susceptibility for intercrystalline corrosion in Al-Mg alloys - Chemical etching
Exhaust valve steel - Fe-19Cr-8Ni-0.4C
Extraction replica etchant for Cu alloys - Chemical etching
Extraction replica etchant for high chromium and alloy steels - Chemical etching
Extraction replica etchant for high speed steels - Chemical etching
Extraction replica etchant for mild and low alloy steels - Chemical etching
Extraction replica etchant for nickel alloys - Chemical etching
Extraction replica etchant for stainless steels - Chemical etching
Extraction replica etchant for titanium alloys - Chemical etching
F (Fast) etchant - Silicon - Chemical etching
F etchant - LiF - Dislocation etching
Fe (100) wafers - Chemical etching
Fe (100) wafers - Dislocation etching
Fe (100) wafers and other orientations - Chemical etching
Fe (100) wafers used in a magnetics study - Chemical etching
Fe 3% Si steel - Electrolytic polishing
Fe and Fe-C alloys - Electromechanical polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe and steel - Electrolytic polishing
Fe as SST 305 - Gas cleaning
Fe as SST 401 wire 0.020 diameter - Electrolytic forming
Fe as flat soft iron lap platens - Chemical cleaning
Fe as flat soft iron lap platens - Chemical cleaning
Fe as grey iron flame hardened - Chemical etching
Fe as grey iron specimens - Chemical etching
Fe as iron alloy specimens - Ionized gas cutting
Fe as stainless steel tubing - Chemical cleaning
Fe cast alloy - Will develop concentrations of Steatite
Fe colloidal spheres - Electrolytic forming
Fe polycrystalline discs - Electrolytic polishing
Fe polycrystalline specimens - Chemical cleaning
Fe polycrystalline specimens - Chemical etching
Fe polycrystalline specimens - Electrolytic polishing
Fe polycrystalline whiskers - Electrolytic polishing
Fe single crystal and polycrystalline spheres - Thermal forming
Fe single crystal spheres - Chemical etching
Fe single crystal whiskers - Chemical etching
Fe single crystal whiskers - Thermal etching
Fe single crystal whiskers etched in this solution to observe dislocations
Fe single crystals - Chemical etching
Fe specimen - Cleaning and removal solution with some preferential attack
Fe specimens - Chemical etching
Fe specimens - Chemical etching
Fe specimens - Chemical etching
Fe specimens - Heat cleaning
Fe specimens - Solution used as a general removal and surface cleaning etch
Fe specimens - Solution used as a polishing etch
Fe specimens of alpha-iron - Electrolytic thinning
Fe thin films deposited by MBE on GaAs, (110) wafer substrates - Chemical etching
Fe(3-x)Ti(x)O4 single crystal - Chemical etching
Fe, Fe-C alloys, low-iron alloys - Electromechanical polishing
Fe, Fe-Si alloys - Chemical polishing
Fe, low-carbon steels - Chemical polishing
Fe, low-carbon steels - Chemical polishing
Fe, low-carbon steels, Fe-20% Ni-5% Mn alloy - Chemical polishing
Fe, low-carbon steels, low-alloy steels - Chemical polishing
Fe, single crystal iron spheres - Chemical etching
Fe-26Cr-1Mn alloy (oxidised) - Electrolytic polishing and electrolytic etching
Fe-3% Si alloy - Chemical polishing
Fe-3% Si alloy - Dislocation etching
Fe-Ag alloys - Chemical etching
Fe-Al alloy - Al-Al9Fe eutectic
Fe-Al alloy - Alloy with 35.5 at.% Al
Fe-Al alloy - Alloy with 8 wt.% Fe
Fe-Al alloy - Alloys with 2-6% Fe
Fe-Al alloy - Alloys with 49-54% Fe
Fe-Al alloy - Electrolytic thinning
Fe-Al alloys - Chemical etching
Fe-Al alloys - Chemical etching
Fe-Al alloys - Chemical etching
Fe-Al alloys - Electrolytic polishing
Fe-Al alloys - Electrolytic polishing with double jet
Fe-Al-C alloy - Alloys with 7% Al and 1-2% C
Fe-Al-C alloy - Fe-0.3C-0.5-10Al
Fe-As alloys - For alloys with 0.2 - 1.4% As
Fe-Au alloys - Electrolytic polishing
Fe-Au alloys - For alloys with 4% Au
Fe-B alloy - Fe80-B20 - Electrolytic thinning
Fe-B alloy - Fe80-B20 - Electrolytic thinning
Fe-B alloy - Fe80-B20
Fe-B alloy - Fe83-B17 - Electrolytic thinning
Fe-B-Si alloy - Electrolytic thinning for TEM
Fe-Be (20%) polycrystalline wire - Electrolytic cleaning
Fe-C (1.5%)-Ni (5%) alloy specimens - Chemical polishing
Fe-C-Cr alloy - Fe-0.1C-3Cr
Fe-C-Mn alloy - Fe-0.1C-3.1Mn
Fe-C-Ni alloy - Fe-0.1/0.4C-3.3/7.5Ni
Fe-C-Ni alloy - Fe-0.6C-20Ni
Fe-C-Si alloy - Fe-0.4C-1.7Si
Fe-Co alloys - Electrolytic polishing
Fe-Co magnetic alloys - Chemical etching
Fe-Co-Al alloy - Alloy with 15% Co and 11% Al
Fe-Co-Ni alloys - Chemical etching
Fe-Co-Ni-C-Cr-Mo alloy - HY-180M steel, Fe-0.16C-14Co-10Ni-2Cr-1Mo
Fe-Co-Si alloys - Electrolytic polishing
Fe-Co-Ti alloy - 10-20% Co, 2-6% Ti
Fe-Co-Ti alloy - 82% Co-12% Fe-6% Ti
Fe-Co-V alloy - Chemical etching - ASTM etchant No. 74
Fe-Cr alloy - 14-18% Chromium ferrite stainless steel
Fe-Cr alloy - Alloys with 15-20% Cr
Fe-Cr alloy - Electrolytic polishing, electrolytic etching, chemical etching
Fe-Cr alloy - Electrolytic thinning
Fe-Cr alloy - Fe-10/50 at.% Cr - Electrolytic thinning
Fe-Cr alloy - Fe-10Cr - Electrolytic thinning
Fe-Cr alloy - Fe-26Cr
Fe-Cr alloy - Thinning for electron microscopy
Fe-Cr, Fe-Cr-Ni and Fe-Cr-Mn alloys - Chemical etching
Fe-Cr, Fe-Cr-Ni and Fe-Cr-Mn steels - Chemical etching
Fe-Cr-Al system - Chemical etching and thinning
Fe-Cr-Al system - Fe-10/50 at.% Cr-5/40 at.% Fe
Fe-Cr-C alloy - Chemical etching
Fe-Cr-C alloy - Chemical etching
Fe-Cr-C alloy - Electrolytic thinning
Fe-Cr-C alloy - Fe-0.2C-5/10Cr
Fe-Cr-C alloy - Fe-0.8/1.2C-5/6Cr
Fe-Cr-C alloys - Fe-4.9% Cr-1.1% C
Fe-Cr-Co alloy - Fe-28Cr-10.5Co
Fe-Cr-Mn-C alloys - Chemical etching
Fe-Cr-Mn-Mo-C alloy - Chemical etching
Fe-Cr-Mn-Ti alloy - 10Cr-4/5Si-12/16Mn-0.5/2Ti - Electrolytic thinning
Fe-Cr-Mo alloy - 14-18 Cr - 2 Mo (+ 0.05% Ti), ferritic stainless steel
Fe-Cr-Mo alloy - Fe-24Cr-3Mo - Electrolytic thinning
Fe-Cr-Mo-C alloy - Chemical etching
Fe-Cr-Mo-Ni alloy - Fe-29Cr-4Mo-2Ni, stainless steel
Fe-Cr-Mo-Ti alloy - Fe-13Cr-1.5Mo-2.5Ti - Electrolytic polishing
Fe-Cr-Nb alloy - Pseudo-binary eutectic at 13.3% Nb and 23% Cr
Fe-Cr-Ni alloy - Alloy 800, Fe-30/35Ni-19/23Cr - Electrolytic polishing
Fe-Cr-Ni alloy - Fe-16/18Cr-10/14Ni - Electrolytic polishing
Fe-Cr-Ni alloy - Fe-28Cr-5Ni - Electrolytic thinning
Fe-Cr-Ni-C alloy - Chemical etching
Fe-Cr-Ni-C-Mo-Mn-Si alloy - Fe-9Cr-8Ni-3Mn-3Si-4Mo-026C
Fe-Cr-Ni-Mn-C alloy - Chemical etching
Fe-Cr-Ni-Mn-Mo-Si alloy - Fe-24.5Cr-5.5Ni-3.1Mo-0.6Mo-0.4Si - Electrolytic thinning
Fe-Cr-Ni-Mo alloy - Fe-24Cr-3Mo-5Ni - Electrolytic thinning
Fe-Cr-Ni-Mo-Cu-Mn-Si alloy - U50 alloy Fe-21Cr-7.4Ni-2.4Mo-1.8Cu-0.6Mn-0.5Si
Fe-Cr-Ni-Nb stainless steel - Fe-20Cr-25Ni-0.5Nb (+ C) - Electrolytic polishing
Fe-Cr-Si-Ti alloy - Fe-10/16Cr-4.5/6Si-2Ti - Electrolytic thinning
Fe-Cr-Ta alloy - Fe-1 at.% Ta-7 at.% Cr - Electrolytic polishing
Fe-Cr-Ti-Mo alloy - Fe-12Cr-2Mo-2.5Ti - Electrolytic polishing
Fe-Cr-Ti-Mo-Nb alloy - Fe-13Cr-2Mo-2.5Ti-1Nb - Electrolytic polishing
Fe-Cu-Ni alloy - Fe-2Cu-2Ni - Electrolytic polishing
Fe-Mn (1%) single crystal specimens - Chemical etching
Fe-Mn alloy - Alloys with 5-20% Mn
Fe-Mn alloy - Electrolytic thinning
Fe-Mn alloy - Electrolytic thinning
Fe-Mn alloy - Electrolytic thinning by Bollman technique
Fe-Mn alloy - Fe-1 at.% Mn
Fe-Mn alloy - Fe-12% Mn
Fe-Mn alloys - Chemical thinning
Fe-Mn alloys - Chemical thinning
Fe-Mn system - Electrolytic polishing
Fe-Mn system - Electrolytic thinning
Fe-Mn-Al-C alloy - Electrolytic thinning
Fe-Mn-Al-C-Co alloy - Electrolytic thinning
Fe-Mn-Al-C-Cr alloy - Electrolytic thinning
Fe-Mn-Al-C-Cu alloy - Electrolytic thinning
Fe-Mn-Al-C-Mo alloy - Electrolytic thinning
Fe-Mn-Al-C-Nb alloy - Electrolytic thinning
Fe-Mn-Al-C-Si alloy - Electrolytic thinning
Fe-Mn-Al-C-Ti alloy - Electrolytic thinning
Fe-Mn-Al-C-V alloy - Electrolytic thinning
Fe-Mn-C alloy - Fe-14% Mn-0.4% C, plus Cr, V, Mo
Fe-Mn-Si-Ti alloy - Fe-9Mn-4.7Si-2.5Ti
Fe-Mn-Zn pressed powder blanks - Chemical cleaning
Fe-Mo alloy - Alloys with 1.94% Mo
Fe-Mo alloy - Alloys with 11 at.% Mo
Fe-Mo alloy - Alloys with 12-20 at.% Mo
Fe-Mo alloy - Alloys with 8% Mo
Fe-Mo alloys - Electrolytic polishing
Fe-Mo solid solution alloys - Chemical polishing
Fe-Mo-Al alloys - Electrolytic polishing
Fe-Mo-C alloy - Fe-0.5/5Mo-1C with impurities
Fe-Mo-Mn-C alloys - Chemical etching
Fe-Mo-N alloy - Alloys with 3 at.% Mo, 2-3 at.% N
Fe-Mo-Ni-C alloys - Chemical etching
Fe-N alloy - Alloys with 1.5% N2
Fe-Ni (65%) alloy specimens - Chemical etching
Fe-Ni alloy - Alloys with 3-9% Ni
Fe-Ni alloy - Electrolytic thinning
Fe-Ni alloy - Electrolytic thinning by Bollman technique
Fe-Ni alloy - Electrolytic thinning by Bollmann technique
Fe-Ni alloy - Electrolytic thinning by Bollmann technique
Fe-Ni alloy - Fe-10-40% Ni - Chemical and electrolytic polishing
Fe-Ni alloy - Fe-12 at.% Ni - Chemical polishing and electrolytic thinning
Fe-Ni alloy - Fe-12Ni - Chemical and electrolytic polishing
Fe-Ni alloy - Fe-40/80Ni
Fe-Ni alloy - Jet electrolytic polishing
Fe-Ni alloy - Low voltage electrolytic thinning
Fe-Ni alloys - Chemical and electrolytic thinning
Fe-Ni alloys - Chemical etching
Fe-Ni alloys - Chemical etching
Fe-Ni alloys - Chemical etching
Fe-Ni alloys - Chemical thinning
Fe-Ni alloys - Electrolytic polishing
Fe-Ni alloys - Electrolytic polishing
Fe-Ni alloys from 5-25% Ni - Color etching - Colors martensite
Fe-Ni and Fe-Co magnetic alloy - Recommended for electron microscopy - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Fe-Co magnetic alloys - Grain size, structure
Fe-Ni and Ni-Al alloys - Chemical etching
Fe-Ni or Fe-Co alloys - Electrolytic polishing
Fe-Ni oxide couple - Chemical etching
Fe-Ni thin film - Chemical cleaning
Fe-Ni-Al alloy - Alloys with 10-60% Fe, 30-80% Ni, 4-30% Al
Fe-Ni-Al-C alloy - Electrolytic thinning
Fe-Ni-Al-C-Co alloy - Electrolytic thinning
Fe-Ni-Al-C-Cr alloy - Electrolytic thinning
Fe-Ni-Al-C-Cu alloy - Electrolytic thinning
Fe-Ni-Al-C-Mo alloy - Electrolytic thinning
Fe-Ni-Al-C-Nb alloy - Electrolytic thinning
Fe-Ni-Al-C-Si alloy - Electrolytic thinning
Fe-Ni-Al-C-Ti alloy - Electrolytic thinning
Fe-Ni-Al-C-V alloy - Electrolytic thinning
Fe-Ni-Al-Ti alloy - Fe-3.4Ni-1.9/2.3Al-0.7/2.1Ti
Fe-Ni-As system - Chemical etching
Fe-Ni-B alloy - Fe40-Ni40-B20 - Electrolytic polishing
Fe-Ni-B alloy - Fe50-Ni30-B20 - Electrolytic thinning
Fe-Ni-C alloy - 10-40% Ni, 0.1% C
Fe-Ni-C alloy - 21-33 wt.% Ni, < 0.6 wt.% C
Fe-Ni-C alloy - Alloy with 31% Ni and 0.3% C
Fe-Ni-C alloy - Alloys with 20-30% Ni and < 0.6% C
Fe-Ni-C alloy - Electrolytic polishing
Fe-Ni-C alloy - Fe-24Ni-0.5C
Fe-Ni-C alloy - Fe-31Ni-0.3C
Fe-Ni-C system - Fe-27Ni-0.03C
Fe-Ni-Co alloy - Fe, 29 wt.% Ni, 18 wt.% Co
Fe-Ni-Co alloy - Ni, 68% Fe, up to 15% Co
Fe-Ni-Co-Ta alloy - Fe, 18/29 Ni, 8/20 Co, 2/3 Ta
Fe-Ni-Co-W system - Fe-17/18.5 Ni-8/9 Co-5/10 W
Fe-Ni-Cr alloy - Fe-15Ni-15Cr-single crystal - Electrolytic polishing
Fe-Ni-Cr alloy - Very low C stainless steel
Fe-Ni-Cr heat resistant casting alloy - Stains austenite, then sigma phase, then carbide particles
Fe-Ni-Cr heat resistant casting alloys - Blackens sigma phase without oylining other phases
Fe-Ni-Cr heat resistant casting alloys - Electrolytic etching
Fe-Ni-Cr heat resistant casting alloys - Electrolytic etching
Fe-Ni-Cr heat resistant casting alloys - Etchant for delineating general structure
Fe-Ni-Cr heat resistant casting alloys - Etchant for delineating general structure
Fe-Ni-Cr heat resistant casting alloys - Etchant for delineating general structure
Fe-Ni-Cr heat resistant casting alloys - Etchant for staining or film forming
Fe-Ni-Cr heat resistant casting alloys - Etchant for staining or film forming
Fe-Ni-Cr heat resistant casting alloys - Etchant for staining or film forming
Fe-Ni-Cr heat resistant casting alloys - Etchant for staining or film forming
Fe-Ni-Cr heat resistant casting alloys - Intermediate etch between Vilella's and ammonium hydroxide (electrolytic)
Fe-Ni-Cr heat resistant casting alloys - Outlines carbide and sigma
Fe-Ni-Cr heat resistant casting alloys - Used after Glyceregia; outlines carbides particles, stains sigma phase
Fe-Ni-Cr-Al-Y alloy - Austenite alloy, FeNi45Cr20Al5Y0.02
Fe-Ni-Cr-Mo-Nb-Ti-Al alloy - Inconel 718, Fe-22Ni-19Cr-5Mo-5Nb-1Ti-0.5Al
Fe-Ni-Cr-Nb-Ti-Al alloy - Fe-40% Ni-15.8% Cr-2.5% Nb-1.6% Ti-0.20% Al+C, Mn, B, superalloy 706
Fe-Ni-Cr-Ti-Al alloy - Fe-35Ni-15Cr-3(Ti+Al), Fe-35Ni-20Cr-3(Ti+Al)
Fe-Ni-Mn alloy - Fe-19-24% Ni-3-5% Mn
Fe-Ni-Mn alloy - Fe-6-8% Ni- 2-4% Mn
Fe-Ni-O alloys - Chemical etching
Fe-Ni-P alloys - Chemical and electrolytic thinning
Fe-Ni-Pt alloy - Etch for Pt rich, high Fe alloys
Fe-Ni-Ta alloy - Fe-32 at.% Ni-3 at.% Ta
Fe-Ni-Ti alloy - Fe-30Ni-6Ti
Fe-Ni-Ti alloy - Fe-33Ni-3Ti
Fe-Ni-Ti alloys - Chemical polishing and eletro thinning
Fe-Ni-Ti-Al alloy - Fe-34Ni-3Ti-0.5Al
Fe-Pd alloy - For Pd rich alloys
Fe-Pt alloy - Alloys with 20.5% Pt
Fe-Pt alloys (approx. Fe3Pt) - Electrolytic polishing
Fe-Pt system - Chemical etching
Fe-Rh alloy - Alloy with approx. 50 at.% Rh
Fe-Sb alloys - For alloys with < 5% Sb
Fe-Si (3%) single crystal specimens - Electrolytic polishing
Fe-Si (4%) polycrystalline rods - Chemical etching
Fe-Si alloy - Al, Al-Si alloys, Fe-Si alloys
Fe-Si alloy - Electrolytic thinning
Fe-Si alloy - Electrolytic thinning
Fe-Si alloy - Electrolytic thinning
Fe-Si alloy - Electrolytic thinning by Bollman technique
Fe-Si alloy - Particullary good for Al-Si alloys
Fe-Si alloy - Universal electrolyte
Fe-Si alloy sheet steel - Chemical etching
Fe-Si alloys (1.75% Si) - Electrolytic polishing and etching
Fe-Si alloys (3% Si) - Dislocation etch pit etch
Fe-Si alloys (3% Si) - Electrolytic polishing
Fe-Si alloys (approx. FeSi2) - Chemical etching
Fe-Si alloys - Dislocation etching
Fe-Si alloys - Electrolytic polishing
Fe-Si alloys - Electrolytic polishing
Fe-Si alloys - Electrolytic polishing
Fe-Si alloys - Electrolytic polishing
Fe-Si alloys - Electrolytic polishing
Fe-Si single crystals - Chemical and elctrolytic etching
Fe-Si specimens - Electrolytic etching
Fe-Sn alloy (1.3% Sn) - Electrolytic thinning
Fe-Sn alloy (Alpha-Fe alloys) - Chemical etching
Fe-Sn alloy (Alpha-Fe alloys) - Chemical polishing
Fe-Ta alloy - Alloys with low Ta
Fe-Ta alloy - Alloys with low Ta
Fe-Ti alloy (FeTi) - Chemical etching
Fe-Ti alloy - Electrolytic thinning
Fe-Ti system (< 1.4% Ti) - Chemical polishing
Fe-Ti-Al alloy - Fe-0/24 at.% Al -
Fe-TiC sintered carbides - Chemical etching
Fe-V alloys (0.1 wt.% V) - Electrolytic polishing
Fe-V alloys (0.49% V) - Electrolytic thinning
Fe-V alloys - Chemical etching
Fe-W alloys (0.31% W) - Electrolytic thinning
Fe-W alloys - Electrolytic polishing
Fe-W-C alloy - Fe-0.21/0.75C-6.3/23W
Fe-W-Cr-V alloy - Fe-0.75C-18W-1.1V-4Cr
Fe-W-Mo-Cr-V-C alloy - M2 alloy, Fe-3.5W-3Mo-3.5Cr-1V-0.5C
Fe-W-Mo-Cr-V-Cr alloy - Etchants for carbides
Fe-Zn system - Actually used for distunguishing layer in galvanised plate
Fe/Ni specimen - Chemical polishing
Fe/Ni specimen - Electrolytic polishing
Fe2Al3Si3O12 as natural single crystal almandite - Chemical cleaning
Fe2Mo3O8 single crystals - Chemical etching
Fe2O3 natural single crystals - Chemical etching
Fe2O3 specimens and powder - Molten flux, removal
Fe2O3 thin film - Chemical etching
Fe3C in cast iron - Dislocation etching
Fe3C-Fe specimens - Chemical etching
Fe3Ge2 as a crystalline deposit - Chemical etching
Fe3Ge3 thin films - Chemical etching
Fe3O4 artificial single crystal magnetite - Cutting
Fe3O4 as fine natural single crystal - Chemical cleaning
Fe3O4 grown as a single crystal ingot - Chemical cleaning
Fe3O4 single crystal - Chemical etching
Fe3O4 single crystals - Chemical etching
Fe3O4 specimen - Chemical polishing
Fe3O4 specimens - Chemical etching
FeAl intermetalics - Chemical etching
FeAl single crystal specimens - Chemical etching
FeC single crystal alloys - Chemical thinning
FeGe2 (100) and (110) wafers - Chemical etching
FeO x nH2O the natural mineral limonite - Chemical cleaning
FeO(x) as thin film - Chemical cleaning
FeO(x) thin films - Chemical etching
FeP2 as precipitate - Chemical etching
FePd (100) and crystalline thin films - Gas corrosion
FeS2 as artificial and natural single crystals - Pressure
FeS2 single crystal ingot - Chemical polishing
FeSi (7.7%) single crystal (100) - Thermal de-stress
FeSi specimens - Gas etching
FeWSi thin films deposited on silicon, (100) wafers - Chemical etching
Ferric cyanide etchant - Ge hemispheres - Chemical etching
Ferrite specimens - Thermal etching
Ferritic and austenitic stainless steels - Chemical etching
Ferritic and martensitic stainless steels - Color etching
Ferritic chromium steels-Ferritic chromium steels, min. 12% Cr
Ferritic stainless steel with 17% Cr - Electrolytic polishing
Ferritic stainless steels - Chemical etching
Ferritic stainless steels - Chemical etching
Ferromanganese, manganese silicate and Mn-Si-Cr alloys - Chemical etching
Fine-grained, heavily deformed steels - Chemical etching
Finlay's A etchant (Remington's A etchant) - For Ti and Ti/Zr
Finlays B etchant - For Ti
Fisher-Marcinkowski's electropolish solution
Flat's etchant - Ni-Ti alloys
Flick's etchant - Pure Al and Al alloys
Flint glass - Etching for revealing recrystallization effects
Fluor regia - Silicon - Chemical etching
Fluor regia etchant - Cr and Cr alloy - Chemical etching
Fluor regia etchant - Nb and alloys - Chemical etching
Fluor regia, modified - Beryllium - Chemical etching
Fluorapatite-Cu5FP3O12 - Chemical polishing
Fluorine specimen
For Co and Co alloys - Chemical etching
For most Al materials and Al alloys - Chemical etching
For most Al type alloys, Al-Be alloys - Chemical etching
For most Al types an alloys, especially Cu-containing alloys - Chemical etching
For most Ti materials and Ti alloys, Ti-Mn and Ti-V-Cr-Al alloys - Chemical etching
For most alloys of RE metals, CeMM alloys - Chemical etching
Franchini's color etchant - Al-Si-Cu-Ni cast alloys - Chemical etching
Frank's etchant - Fe + 16-25 Cr + 3-6 Ni + 5-1C
Frey's etchant - Flow lines in low carbon N2 steels, convertor steels - Chemical etching
Fry's etchant (2)
Fry's etchant - Fe pure metal samples - Chemical etching
Fry's etchant - Fe-Si specimens and other iron alloys - Chemical etching
Fry's etchant - Iron - Dislocation etching
Fry's etchant - Iron and steels - Chemical etching
Fry's etchant - Iron, steels, cast irons - Normalized steels
Fry's etchant - Ni-Ge alloys - Chemical etching
Fry's etchant - Ni-Pd-Ga alloys - Chemical etching
Fry's etchant - Ni-Pt-Ga alloys - Chemical etching
Fry's etchant - Nimonic alloys - Nimonic alloys PE7, PE11, and PE16, Nimonic Pk 31
Fry's etchant - Stainless steels - Chemical etching
Fry's etchant - Wrought stainless steels - General structure
Fry's etchant, modified - Fe, mild steel - Dislocation etching
Fuss's etchant - Wrought aluminium alloy - Chemical etching
G etchant - For Fe/Ni
G etchant - Steels for high temperatures
GE Turbo-chrome etchant - Martensitic stainless steel and high-alloy steels - Chemical etching
GE Turbo-chrome etchant - P91 (X10CrMoV91) steel - Chemical etching
GE Turbo-chrome etchant - Stainless steels - Chemical etching
GTD-111 alloy etching
GX6CrNi13-4 steel - Electrolytic-potentiostatic isolation of residues
GX6CrNi13-4 steel - Sample preparation
Ga (100) wafers - Chemical cleaning
Ga arsenide - Chemical polishing
Ga as a constituent in single crystal GaAs p-type wafers - Chemical etching
Ga as solid material - Chemical cleaning
Ga as solid material - Chemical cleaning
Ga as solid material - Chemical etching
Ga phosphide - Chemical polishing
Ga-As-P alloy (GaAsP) - Chemical polishing and etching
Ga-As-P specimens - (111) faces etched as cleaved - Dislocation etch in Abraham's AB etch
Ga-As-P specimens - GaAs(1-y)P(x), 0.6 >x<1
Ga-As-P system - Dislocation etching for (111)A -(111)B faces
Ga-As-P-Sb specimens - GaAs(x)Sb(y)P(1-x-y)
Ga-Au alloys - Chemical etching
Ga-Gd garnet - Gd3Ge4O12 - Dislocation etch
Ga-In-As phosphide - Chemical etching
Ga-In-As phosphide - Chemical polishing
Ga-In-As phosphide - Chemical polishing
Ga-In-As phosphide - Chemical polishing
Ga-In-As phosphide - Etching for pit etch
Ga-In-As phosphide - In a study of etching characteristics of InGaAsP/InP wafers
Ga-In-As phosphide - Selective etching for GaInAsP against InP
Ga-In-Sb specimens - In(x)Ga(1-x)Sb
Ga-Nd garnet - Nd3Ga5O12
Ga2O3 and Ga(OH)3 on GaAs, (100), p-type wafers - Chemical etching
Ga2O3 as a native oxide on gallium arsenide wafers - Chemical cleaning
Ga2O3 as native oxide on GaAs (100) wafers - Physical etching
Ga2O3 as native oxide on GaAs - Physical etching
Ga2O3 doped with iron and grown as single crystal ferrites - Chemical etching
Ga2O3 thin film growth of GaAs, (100), p-type wafers - Chemical oxidizing
GaAs (100) Si-doped wafers - Chemical cleaning
GaAs (100) Si-doped wafers - Chemical etching
GaAs (100) Te-doped wafer - Chemical cleaning
GaAs (100) Te-doped wafers - Chemical etching
GaAs (100) Zn-doped wafer - Chemical cleaning
GaAs (100) Zn-doped, p-type wafers - Chemical etching
GaAs (100) and (111) wafers - Chemical cleaning
GaAs (100) and (111) wafers - Chemical cleaning
GaAs (100) and (111) wafers - Chemical etching
GaAs (100) and (111) wafers - Acid oxide removal
GaAs (100) and (111) wafers doped with Se, Te, Zn, and Pd - Dislocation etching
GaAs (100) and GaAs (111) wafers - Electrolytic oxidation
GaAs (100) and InSb (100) wafers - Etch cleaning
GaAs (100) ingot and wafers - Dislocation etching
GaAs (100) n+ wafers - Chemical etching
GaAs (100) n-type wafers - Chemical cleaning
GaAs (100) n-type wafers - Chemical etching - /polishing/cleaning
GaAs (100) n-type wafers - Chemical etching
GaAs (100) n-type wafers - Chemical etching
GaAs (100) n-type wafers - Chemical etching
GaAs (100) n-type wafers - Chemical polishing
GaAs (100) n-type, 0.001-0.04 Ohm cm resistivity wafers - Chemical thinning
GaAs (100) n/n +, Si-doped wafers - Chemical cleaning
GaAs (100) p-type wafers - Chemical cleaning
GaAs (100) p-type wafers - Chemical etching
GaAs (100) substrates - Chemical etching
GaAs (100) undoped wafers - GaAs (100) undoped wafers
GaAs (100) wafer Zn-doped - Chemical etching
GaAs (100) wafer substrates - Chemical thinning
GaAs (100) wafers - Chemical cleaning
GaAs (100) wafers - Chemical cleaning
GaAs (100) wafers - Chemical cleaning
GaAs (100) wafers - Chemical cleaning
GaAs (100) wafers - Chemical cleaning
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Chemical polishing
GaAs (100) wafers - Chemical polishing
GaAs (100) wafers - Chemical polishing
GaAs (100) wafers - Chemical polishing
GaAs (100) wafers - Chemical polishing
GaAs (100) wafers - Chemical polishing/cleaning
GaAs (100) wafers - Chemical thinning
GaAs (100) wafers - Dislocation etching
GaAs (100) wafers - Dislocation etching
GaAs (100) wafers - Electrolytic, oxidation
GaAs (100) wafers - Cemical thinning
GaAs (100) wafers - Chemical etching
GaAs (100) wafers - Ionized gas
GaAs (100) wafers - Lift-off
GaAs (100) wafers - Metal, replication
GaAs (100) wafers - Physical thinning
GaAs (100) wafers Be diffused - Chemical etching
GaAs (100) wafers Cut 2?-off plane toward (110) - Chemical cleaning
GaAs (100) wafers and other low index planes - Chemical thinning
GaAs (100) wafers and other orientations - Chemical etching
GaAs (100) wafers and other orientations - Chemical etching
GaAs (100) wafers and other orientations - Dislocation etching
GaAs (100) wafers as substrates - Chemical etching
GaAs (100) wafers cut within 2-3? of plane - Chemical polishing
GaAs (100) wafers cut within ?/2? of plane, Te-doped - Chemical etching
GaAs (100) wafers doped with germanium - Chemical etching
GaAs (100) wafers fabricated as Schottky barrier diodes - Chemical thinning
GaAs (100) wafers fabricated as diodes - Electrolytic polishing
GaAs (100) wafers ion implanted with Si, Zn, and Be - Chemical thinning
GaAs (100) wafers ion implanted with zinc - Chemical etching
GaAs (100) wafers used as substrates for Gunn diode - Chemical etching
GaAs (100) wafers used as substrates for LPE growth of GaAlAs - Chemical etching
GaAs (100) wafers used as substrates for MBE deposition of AlGaAs - Chemical cleaning
GaAs (100) wafers used as substrates for OMVPE growth of GaInAs and GaInP layers - Dislocation etching
GaAs (100) wafers used as substrates for deposition of AlN - Chemical cleaning
GaAs (100) wafers used for epitaxy growth of InGaAs - Chemical cleaning
GaAs (100) wafers used for zinc diffusion at 85O?C - Chemical polishing
GaAs (100) wafers used in a study of zinc diffusion - Chemical polishing
GaAs (100) wafers used in a study of zinc diffusion at 850?C - Chemical polishing
GaAs (100) wafers used to fabricate Schottky barrier diodes - Chemical polishing
GaAs (100) wafers with epitaxy grown heterostructure - Chemical etching
GaAs (100) wafers zinc diffused - Chemical etching
GaAs (100) wafers zinc diffused - Chemical etching
GaAs (100) wafers, Zn diffused - Chemical etching
GaAs (100), (111) and (110) wafers - Chemical etching
GaAs (100), (111) and (110) wafers - Chemical etching
GaAs (100), (111) and (110) wafers - Chemical etching
GaAs (100), (111), (110), (211) wafers - Chemical etching
GaAs (100), Te-doped, n-type wafers - Chemical cleaning
GaAs (100), and InP, (100) wafers - Chemical thinning
GaAs (100), n-type wafers - Chemical cleaning
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), n-type wafers - Chemical etching
GaAs (100), wafers, Si or Be doped wafers - Chemical cleaning
GaAs (110) wafers were cleaved under UHV - Vacuum cleaning
GaAs (110), (111), (100) wafers - Chemical polishing
GaAs (110), (111), and (211) wafers - Chemical etching
GaAs (111) and (100) wafers - Chemical etching
GaAs (111) and (100) wafers - Chemical etching
GaAs (111) and (100) wafers - Chemical polishing
GaAs (111) and (100) wafers - Chemical polishing
GaAs (111) as single crystal wafers and spheres - Chemical etching
GaAs (111) n-type and undoped material - Chemical polishing
GaAs (111) wafers - Chemical cleaning
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical etching
GaAs (111) wafers - Chemical polishing
GaAs (111) wafers - Chemical polishing
GaAs (111) wafers - Chemical polishing
GaAs (111) wafers - Chemical polishing
GaAs (111) wafers - Chemical polishing
GaAs (111) wafers Cr, Te, and Zn doped - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical etching
GaAs (111) wafers and spheres - Chemical polishing
GaAs (111) wafers fabricated as Esaki diodes - Chemical polishing
GaAs (111) wafers used as substrates for epitaxy growth of Ge and ZnSe - Chemical etching
GaAs (111) wafers used in a polarity etching study - Chemical etching
GaAs (111) wafers used in a polarity study - Chemical etching
GaAs (111) wafers used in a polarity study - Chemical etching
GaAs (111) wafers used in a polarity study - Chemical etching
GaAs (111) wafers used in a polarity study of III-V compound semiconductors - Chemical etching
GaAs (111) wafers used in an etch development study - Chemical etching
GaAs (111) wafers used in an etch development study - Chemical etching
GaAs (111) wafers used in an etch development study - Chemical etching
GaAs (111) wafers with (111) Ga surface polished - Chemical polishing
GaAs (111), (100) and (110) wafers - Dislocation etching
GaAs (111), (100), and (110) wafers - Chemical etching
GaAs (111), n-type, 5-30 Ohm cm resistivity wafers - Chemical etching
GaAs (111), n-type, 5-30 Ohm cm resistivity wafers - Chemical polishing
GaAs (111)A and (TTT)B wafers - Chemical polishing
GaAs (111)A wafer - Chemical etching
GaAs (111)A wafer surfaces - Chemical etching
GaAs (111)As, (100) and (110) oriented wafers - Chemical cleaning
GaAs (111)B and (100) both n-type and undoped wafers - Chemical etching
GaAs (1OO), n-type wafers - Chemical etching
GaAs - Dislocation etching
GaAs - Etchant for revealing twin lamellae by staining (211) and etching the (211)
GaAs - Etchant for revealing twin planes
GaAs - Etchant for revealing twin planes
GaAs and GaP (100) and (111)B high n-type wafers - Chemical polishing
GaAs and GaP, etches A and B planes in GaAs - Chemical etching
GaAs and Si (100) wafers - Chemical etching
GaAs as thin film epitaxy grown on germanium substrate - Chemical etching
GaAs grown as a (111) ingot - Chemical etching
GaAs single crystal sphere - Chemical etching
GaAs single crystal spheres - Chemical etching
GaAs single crystal spheres - Chemical etching
GaAs specimens cut as cylinders and hemispheres - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical etching
GaAs wafers - Chemical polishing
GaAs wafers - Chemical polishing
GaAs wafers grown by orizontal Bridgman (HB) technique - Chemical etching
GaAs wafers of various orientations - Chemical polishing
GaAs, (100) wafers - Chemical cleaning
GaAsB (111) n-type wafers and (100) undoped wafers - Chemical etching
GaAsBe (100) p-type wafers - Metal passivation
GaAsBe (110) p-type wafers - Chemical cleaning
GaAsCR (100)(SI) wafers - Chemical polishing/cleaning
GaAsCr (100) (SI) or n+ diffused wafers - Chemical etching
GaAsCr (100) (SI) wafers - Chemical cleaning
GaAsCr (100) (SI) wafers - Chemical cleaning
GaAsCr (100) (SI) wafers - Chemical cleaning
GaAsCr (100) (SI) wafers - Chemical cleaning
GaAsCr (100) (SI) wafers - Chemical cleaning/etching
GaAsCr (100) (SI) wafers - Chemical etching
GaAsCr (100) (SI) wafers - Chemical etching - /polishing
GaAsCr (100) (SI) wafers - Chemical etching
GaAsCr (100) (SI) wafers - Chemical etching
GaAsCr (100) (SI) wafers - Chemical etching
GaAsCr (100) (SI) wafers - Chemical polishing
GaAsCr (100) (SI) wafers - Chemical polishing
GaAsCr (100) (SI) wafers - Chemical polishing
GaAsCr (100) (SI) wafers - Chemical polishing/etching
GaAsCr (100) (SI) wafers - Etch cleaning
GaAsCr (100) (SI) wafers - Oxidation/cleaning
GaAsCr (100) (SI) wafers used as substrates for GaAs growth by MBE - Chemical cleaning
GaAsCr (100) (SI) wafers used as substrates-Oxide removal
GaAsCr (100) (SI) wafers used in a study of surface cleaning - Chemical polishing/cleaning
GaAsCr (100) wafers - Chemical cleaning
GaAsCr (100) wafers within 1/2 degrees of plane - Chemical etching
GaAsCr (100), (111) (SI) and n-type Si doped wafers - Molten flux
GaAsCr, (100) (SI) and InPFe (100) (SI) wafers - Molten flux
GaAsCr, (100) (SI) wafers - Halogen, polish
GaAsTe (100) n-type wafer substrates - Chemical cleaning
GaAs; Zn, (100) wafers cut 2-3?-off plane toward (110) - Chemical polishing
GaAsP wafers as highly p-type doped with Mn - Dislocation etching
GaFeO3 single crystal ingot - Acid, removal
GaN (0001) single crystal thin films - Chemical etching
GaN (0001) single crystal thin films - Electrolytic etching
GaN thin films - Chemical etching
GaN thin films grown by MBE on (0001), and (01.12) single crystals sapphire substrates to 1000 A thickness - Thermal cleaning
GaOxNy surface contamination of gallium arsenide wafers - Chemical etching
GaP (100) and (111) wafers - Chemical polishing
GaP (100) and (111) wafers - Gas polishing
GaP (100) and (111)B, p-type, 0.2 Ohm cm resistivity wafers - Chemical polishing
GaP (100) n-type wafers - Chemical polishing
GaP (100) wafers - Chemical etching
GaP (100), (111)A and (111)B wafers - Chemical polishing
GaP (110) undoped wafers - Chemical polishing
GaP (111) and (100) wafers - Chemical polishing
GaP (111) and GaAs (111) wafers - Chemical polishing
GaP (111) and GaAs (111) wafers - Chemical polishing
GaP (111) and GaAs (111)A wafers - Chemical polishing
GaP (111) wafer - Chemical polishing
GaP (111) wafers - Chemical etching
GaP (111) wafers - Chemical etching
GaP (111) wafers - Chemical etching
GaP (111) wafers - Chemical etching
GaP (111) wafers - Metal decoration
GaP (111) wafers zinc diffused - Chemical etching
GaP (111), (100), (110) wafers - Chemical polishing
GaP (111)B wafers - Chemical etching
GaP (doped with S) - Dislocation etching
GaP - Dislocation etching
GaP material used for growth of AlGaAsP single crystal ingots - Chemical cleaning
GaP polycrystalline material - Chemical cleaning
GaPO4 single crystals - Chemical ecthing
GaS (100), n-type wafers - Chemical polishing
GaS - Dislocation etching
GaSb (100) both undoped and Te-doped wafers - Acid passivating
GaSb (100) both undoped and Te-doped wafers - Acid passivation
GaSb (100) undoped and Te-doped wafers - Chemical polishing
GaSb (100) undoped wafers - Chemical polishing
GaSb (100) undoped wafers - Chemical polishing
GaSb (100) undoped wafers - Chemical polishing
GaSb (100) undoped wafers - Chemical polishing
GaSb (100) wafers - Chemical etching
GaSb (100) wafers - Chemical polishing
GaSb (100) wafers - Chemical, oxide removal
GaSb (100), p-type wafers - Chemical etching
GaSb (111) and (100) wafers - Chemical etching
GaSb (111) and (100) wafers - Chemical etching
GaSb (111) and (100) wafers - Chemical etching
GaSb (111) and (100) wafers - Chemical etching
GaSb (111) and (100) wafers - Chemical etching
GaSb (111) and (100) wafers - Chemical polishing
GaSb (111) wafers - Chemical etching
GaSb (111) wafers - Chemical etching
GaSb (111) wafers - Chemical etching
GaSb (111) wafers - Chemical etching
GaSb (111) wafers - Chemical etching
GaSb (111) wafers - Chemical etching
GaSb (211) wafer - Chemical etching
GaSe (0001) wafers - Mechanical, dislocation
GaSe - Dislocation etching
GaTe specimens - Thermal etching for etch pits
Gadolinium - Chemical etching
Gadolinium - Chemical polishing and etching
Gadolinium - Electrolytic polishing
Gadolinium - Pure Gd, Rare Earths - Co alloys - Grain boundary etch
Gadolinium molybdate (Beta-Gd2(MoO4)3) - Chemical etching
Gadolinium molybdate (Gd-Mo-O) - Etch pits etching
Gadolinium molybdate (Gd2(MoO4)3) - For revealing the antiphase boundaries
Gadolinium telluride (GdTe) - Chemical etching
Gallium antimonide (GaSb) - Chemical etching
Gallium antimonide (GaSb) - Chemical etching
Gallium antimonide (GaSb) - Chemical etching
Gallium antimonide (GaSb) - Growth striations are revealed by this etchant
Gallium arsenide (GaAs polycrystalline) - Chemical etching
Gallium arsenide (GaAs) - Germanium junction - Chemical etching
Gallium arsenide (GaAs) - A study of the etching characteristics
Gallium arsenide (GaAs) - Chemical and electrolytic polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Chemical thinning
Gallium arsenide (GaAs) - Etch for selective removal
Gallium arsenide (GaAs) - Etch pits on (111) face
Gallium arsenide (GaAs) - Etching for etch pitch
Gallium arsenide (GaAs) - Etching for etch pitch
Gallium arsenide (GaAs) - For (001) face
Gallium arsenide (GaAs) - For (001) face - Anodic etch for dislocations
Gallium arsenide (GaAs) - For differentiation from InAs stain in sodium hypochloridesoln
Gallium arsenide (GaAs) - For etch pits etching
Gallium arsenide (GaAs) - For pitch etching
Gallium arsenide (GaAs) - Polishing and chemical etching
Gallium arsenide (GaAs) - Removing the surface damage
Gallium arsenide (GaAs) - Selective etch for dislocations on (111) plane
Gallium arsenide (GaAs) - The p-n junction
Gallium arsenide (GaAs) - To distingish p-n junction
Gallium arsenide (GaAs) - To distinguish between (111) Ga - (111)
Gallium arsenide (GaAs) - Chemical etching
Gallium arsenide (GaAs) - Chemical etching
Gallium arsenide (GaAs) - Chemical etching
Gallium arsenide (GaAs) - Chemical polishing
Gallium arsenide (GaAs) - Electrolytic etching
Gallium nitride (GaN) - Electrolytic etching
Gallium phosphide (GaP) - Chemical etching - Etching for etch pits
Gallium phosphide (GaP) - Chemical etching
Gallium phosphide (GaP) - Chemical etching
Gallium phosphide (GaP) - Chemical etching
Gallium phosphide (GaP) - Chemical etching
Gallium phosphide (GaP) - Chemical etching
Gallium phosphide (GaP) - Chemical polishing
Gallium phosphide (GaP) - Chemical polishing
Gallium phosphide (GaP) - Chemical polishing
Gallium phosphide (GaP) - Chemical polishing and etching
Gallium phosphide (GaP) - Chemical polishing and etching
Gallium phosphide (GaP) - Chemical polishing, chemical etching
Gallium phosphide (GaP) - Chemical thinning
Gallium phosphide (GaP) - Chemical thinning - Aqua Regia
Gallium phosphide (GaP) - Etching (chemical polishing)
Gallium phosphide (GaP) single crystals - Chemical etching
Gallium phosphide (GaP)-Etch pits on (111)A, (111)B(100)
Gallium phosphide (GaP)-S doped n-type, Zn doped p-type
Gallium specimens - Chemical etching
Gallium specimens - Electrolytic polishing
Gallium sulphide (GaS) - Dislocation etching
Gallium-selenium system (Ga-Se) - Chemical etching
Gallium-selenium system (Ga-Se) - Etch pits etching
Gallium-selenium system (Ga-Se) - Etch pits etching
Galvanized steel or Cd coatings - Chemical etching
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - Chemical etching
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - Chemical etching
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - Chemical etching
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - For aluminium-bearing galvanized coatings
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - For aluminium-bearing galvanized coatings
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - For aluminium-bearing galvanized coatings
Galvanneal and hot-dipped galvanized coatings (Fe-Zn) - For tight and extra tight galvanized coatings
Galvannel and hot-diped galvanized coatings on steels
Gamma phases in U-Mo alloys - Electrolytic etching
Gamma-TiAl and alpha 2-Ti3Al - Chemical etching
Gamma-prime-age hardening, Ni-base alloys, grain-boundaries etch - Chemical etching
Garnets as natural single crystals - Chemical etching
Gd single crystal specimens - Thermal etching
Gd-Ag alloys - Chemical etching
Gd-Al alloy - GdAl, Gd3Al, Gd2Al
Gd-Bi system - Chemical etching
Gd-Cd alloys - Chemical etching
Gd-Ce alloys - Chemical polishing
Gd-Fe alloy - Laves phase GdFe2
Gd-Ga garnet - Gd3Ga5O12
Gd-Ga garnet - Gd3Ga5O12
Gd-Ga garnets - Chemical polishing
Gd-Yb alloys - Electrolytic polishing
Gd3Ga5O12 (0001) wafers 3" in diameter - Ketone cleaning
Gd3Ga5O12 (110) wafers - Abrasive polishing
Gd3Ga5O12 (111) cut wafers - Chemical cleaning
Gd3Ga5O12 (111) wafers - Abrasive polishing
Gd3Ga5O12 garnet - Chemical etching
Gd3Ga5O12 garnets - Chemical etching
Gd3Se1.8Ga3.2O12 (0001) wafers - Chemical cleaning
GdN12 specimens - Chemical etching
GdTbFe thin films - Chemical etching
Ge (100) and (110) wafers - Chemical etching
Ge (100) and (111) wafers - Metal etching
Ge (100) specimens - Electrolytic machinning
Ge (100) very thin films grown by PECVD on NaCl, Ge wafers - Thermal cleaning
Ge (100) wafers - Vacuum cleaning
Ge (100) wafers cut within 1? of plane - Physical cleaning
Ge (111) 5-10 Ohm cm resistivity n-type wafers - Chemical etching
Ge (111) and (100) wafers - Chemical etching
Ge (111) and (100) wafers - Solution used as a preferential etch
Ge (111) and (100) wafers used as substrates - Chemical polishing
Ge (111) dendritic ribbon crystals - Dislocation etching
Ge (111) grown ingot with grown-in p-n junction - Electrolytic etching
Ge (111) grown ingots with grown-in p-n junction - Electrolytic etching
Ge (111) grown ingots with grown-in p-n junction - Electrolytic etching
Ge (111) ingots with grown-in p-n junction - Electrolytic etching
Ge (111) n-type wafers - Chemical etching
Ge (111) n-type wafers - Electrolytic etching
Ge (111) n-type, 0.004-40 Ohm cm resistivity wafers - Electrolytic polishing
Ge (111) rectangular bars with grown p-n junctions - Chemical etching
Ge (111) wafer with p-n junctions - Electrolytic etching
Ge (111) wafers - Chemical cleaning
Ge (111) wafers - Chemical cleaning
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical etching
Ge (111) wafers - Chemical polishing
Ge (111) wafers - Chemical polishing
Ge (111) wafers - Chemical polishing
Ge (111) wafers - Chemical polishing
Ge (111) wafers - Chemical polishing
Ge (111) wafers - Chemical polishing
Ge (111) wafers - Electrolytic etching
Ge (111) wafers - Electrolytic etching
Ge (111) wafers - Electrolytic etching
Ge (111) wafers - Electrolytic etching
Ge (111) wafers - Electrolytic etching
Ge (111) wafers - Electrolytic polishing
Ge (111) wafers - Electrolytic polishing
Ge (111) wafers - Electrolytic polishing
Ge (111) wafers - Electrolytic polishing
Ge (111) wafers - Electrolytic polishing
Ge (111) wafers - Electrolytic polishing
Ge (111) wafers - Electrolytic plating
Ge (111) wafers - Abrasive, damage
Ge (111) wafers - Acid, stress
Ge (111) wafers - Cleave
Ge (111) wafers - Junction testing
Ge (111) wafers - Metal, structure
Ge (111) wafers and cylinders - Metal diffusion
Ge (111) wafers and ingots - Chemical etching
Ge (111) wafers and other orientations - Chemical etching
Ge (111) wafers and other orientations - Chemical etching
Ge (111) wafers and other orientations - Chemical etching
Ge (111) wafers and other orientations - Electrolytic etching
Ge (111) wafers and other orientations - Gas oxidation
Ge (111) wafers angle lapped at 5?43' - Chemical etching
Ge (111) wafers fabricated as p-n junction diodes - Chemical etching
Ge (111) wafers fabricated with indium p-n junctions - Junction testing
Ge (111) wafers p-type - Chemical polishing
Ge (111) wafers used as substrates for Ge epitaxy growth - Chemical etching
Ge (111) wafers with epitaxy grown Ge layers - Gas ecthing
Ge (111) wafers with indium - Metal decoration
Ge (111) wafers with lithium diffused p-n junctions - Chemical etching
Ge (111) wafers, p-type, 4 Ohm cm resistivity - Chemical polishing
Ge (111), (100), (110) and (211) wafers - Chemical etching
Ge (111), (100), (110) and (211) wafers - Chemical etching
Ge (111), (100), (110) and (211) wafers - Chemical etching
Ge (111), (100), (110), and (211) wafers - Chemical etching
Ge (111), (100), (110), and (211) wafers - Chemical etching
Ge (111), (100), and (110) wafers - Chemical polishing
Ge (111), (110) and (100) wafers - Chemical etching
Ge (111), (110), (100), (211) wafers and single crystal spheres - Chemical etching
Ge (111), (110), (100), (211) wafers and single crystal spheres - Chemical etching
Ge (111), (110), and (211) wafers - Chemical etching
Ge (111), p- and n-type wafers - Electrolytic polishing
Ge and Ge alloys - Chemical etching
Ge and Ge alloys - Chemical etching
Ge and Ge alloys - Chemical etching
Ge and Ge alloys - Chemical etching
Ge and Ge alloys - Electrolytic etching
Ge and Ge alloys, GaAs, InAs, and AlAs, dislocations on the (111) planes, grain boundary etchant - Chemical etching
Ge and Ge alloys, grain-contrast etchant - Chemical etching
Ge and InP (100) and (111) wafers - Chemical thinning
Ge and Si discs
Ge and Si specimens - Halogen, laser
Ge and Si specimens - Metal, laser
Ge and Si wafers - Chemical polishing
Ge and Si wafers - Electrolytic oxidation
Ge and Si wafers - Ionized gas cleaning
Ge as alloy junction transistors - Molten flux polishing
Ge as alloyed p-n junctions devices - Chemical etching
Ge as cut cubes oriented (001)/(001)(110)/(110) - Chemical polishing
Ge as devices with evaporated metal contacts - Contact etching
Ge as polyerystalline spheres - Thermal forming
Ge as single crystal - Chemical polishing/etching
Ge as single crystal spheres - Chemical polishing
Ge as single crystal spheres - Molten flux etching
Ge as surface barrier diodes - Chemical etching
Ge both p- and n-type specimens - Electrolytic etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Chemical etching
Ge hemispheres - Ge hemispheres used in a preferential etching study
Ge ingot - Alkali, cutting
Ge n-p-n transistors - Electrolytic etching
Ge n-type wafers - Chemical polishing
Ge p-n diffused diode - Electrolytic etching
Ge p-n-p transistors - Acid passivation
Ge p-n-p transistors - Electrolytic passivation
Ge polycrystalline spheres - Gas cleaning
Ge samples - Irradiation
Ge single crystal - Acid, cover
Ge single crystal hemispheres - Chemical etching
Ge single crystal specimens
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal spheres - Chemical etching
Ge single crystal wire filaments - Electrolytic shaping
Ge single cyrstal spheres - Chemical etching
Ge specimens
Ge specimens - Acid oxidation
Ge specimens - Chemical cleaning
Ge specimens - Chemical cleaning
Ge specimens - Chemical cleaning
Ge specimens - Chemical cleaning
Ge specimens - Chemical cleaning
Ge specimens - Chemical oxidation
Ge specimens - Chemical polishing
Ge specimens - Electrolytic etching
Ge specimens - Electrolytic etching
Ge specimens - Electrolytic removing
Ge specimens - Electrolytic shaping
Ge specimens - Electrolytic shaping
Ge specimens - Electrolytic shaping
Ge specimens - Electrolytic shaping
Ge specimens - Electrolytic shaping
Ge specimens - Metal, optics
Ge specimens - Power, plasticity
Ge sphere - Chemical etching
Ge spheres of single crystal germanium and silicon - Chemical polishing
Ge thin films - Dislocation etching
Ge thin films evaporated on GaAsCr (SI) substrates - Chemical cleaning
Ge thin films evaporated on GaAsCr (SI) substrates - Chemical etching
Ge thin films evaporated on Si, Al, Al2O3, GaAs, C substrate - Physical etching
Ge wafers - Chemical etching
Ge wafers - Chemical etching
Ge wafers - Chemical etching
Ge wafers - Chemical etching
Ge wafers - Chemical polishing
Ge wafers - Chemical polishing/etching
Ge wafers - Chemical thinning
Ge wafers - Metal, contamination
Ge wafers doped with copper - Chemical polishing
Ge wafers of different orientations - Chemical cleaning
Ge wafers of different orientations - Dislocation etching
Ge wafers studied for neutron irradiation effects
Ge wafers used as substrates - Chemical polishing
Ge(x)Se(1-x) thin films - Chemical etching
Ge(x)Se(x-1) thin films - Chemical etching
Ge-In alloys - Chemical etching
Ge-In alloys with Ag, Au, Bi, and Cu additions, grain boundary etchant - Chemical etchant
Ge-Si alloys - Chemical etching
Ge-Zn eutectic - Chemical etching
Ge2O3, DC sputtered thin films - Chemical etching
Ge3N4 and Ge3O(1-x)N(x) - Chemical etching
Ge3N4 and Ge3OxNy thin films - Chemical etching
Ge3N4 thin films-Gas densification
GeAs (111) wafer - Chemical etching
GeAs (111) wafers - Chemical etching
GeAs (111) wafers - Chemical etching
GeAs (111) wafers - Chemical etching
GeAs (111) wafers - Chemical etching
GeO glass - Alcohol cleaning
GeO2 as glass blanks - Chemical cleaning
GeO2 thin films-Gas forming
GeS single crystal platelets - Chemical cleaning
GeTe single crystal specimens - Chemical etching
General-purpose solution - Electrolytic polishing - Dislocation etching
General-purpose solution - Electrolytic polishing - Dislocation etching
General-purpose solution - Electrolytic polishing - Dislocation etching
General-purpose solution - Electrolytic polishing - Dislocation etching
General-purpose solution - Electrolytic polishing - Dislocation etching
Germanium - Chemical etching
Germanium - Chemical etching
Germanium - Chemical etching
Germanium - Chemical etching
Germanium - Chemical etching
Germanium - Chemical etching
Germanium - Chemical polishing
Germanium - Chemical polishing
Germanium - Chemical polishing
Germanium - Chemical polishing
Germanium - Chemical polishing
Germanium - Chemical polishing
Germanium - Chemical polishing and etching
Germanium - Dislocation etching
Germanium - Dislocation etching
Germanium - Dislocation etching
Germanium - Dislocation etching
Germanium - Dislocation etching
Germanium - Electrolytic etching
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Electrolytic polishing
Germanium - Etch pits etching
Germanium - Etch pits on (111) face
Germanium - Etch pits on n-type (111) face
Germanium - Etchant for revealing twin planes
Germanium - Final chemical polishing
Germanium - For removal of surface damage
Germanium - Ge and its alloys - Grain boundaries
Germanium - Ge and its alloys - Grain contrast
Germanium - Ge and its alloys, GaAs, InAs, Al As - Grain boundaries, dislocations on (111) planes
Germanium - Ge, Te, Se, telurides, selenides and Zr silicide
Germanium - Ge-In alloys with Ag, Au, Bi, Cu additions
Germanium - Jet polishing, chemical polishing
Germanium - Jet thinning by chemical polishing
Germanium - Removal of work damage by ethching
Germanium - Se, Ge, and their alloys, InAs, InSb, GaSb, GaAs, AlSb, ZnTe, CdTe, InP
Germanium - Si, Ge, and their alloys
Germanium - Si, Ge, and their alloys
Germanium - Si, Ge, and their alloys, GaSb, InSb
Germanium telluride (GeTe) - Chemical etching
Gilman's etchant - Zinc - Chemical polishing and etching
Gilman's etchant I - For Cd
Gilman's etchant II - For Zn
Giometto and Capella's etchant - Martensitic chromium steels - Chemical etching
Glass - Microscope slides - Chemical etching
Glass as microscope slides - Chemical cleaning
Glass fiber reinforced epoxy resins - Chemical etching
Glass fiber reinforced epoxy resins - Chemical etching
Glass fiber reinforced polyester resins - Chemical etching
Glass reinforced polymeric materials - Chemical etching
Glass, soda-lime blanks - Chemical cleaning
Glass-borosilicate and soda-lime - Chemical cleaning
Glass-lead, soda-lime, borosilicate - Thermal processing
Glass-soda-lime - Chemical cleaning
Glass-soda-lime - Chemical lapping/etching
Glass-various types - Chemical cleaning
Glass-various types - Chemical cleaning
Glass-various types - Chemical cleaning
Glass-various types - Chemical cleaning
Glass-various types - Chemical etching
Glass-various types - Chemical etching
Glass-various types, as both sheet and rods - Chemical cleaning
Glyceregia (1) - Austenitic stainless steels
Glyceregia (2) - Fe + 15-30 Cr + 6-40 Ni + <5%
Glyceregia - Austenitic stainless steels - Chemical etching
Glyceregia - Cr and Cr alloys - Chemical etching
Glyceregia - Fe-Ni-Cr heat resistant casting alloys - Etchant for delineating general structure
Glyceregia - High alloy steels, austenitic Mn steels, stainless steels - Chemical etching
Glyceregia - Ni superalloys and Ni-Cr alloys - Chemical etching
Glyceregia - Steel and SST vacuum system parts - Chemical cleaning
Glyceregia - Wrought stainless steels - General structure
Glyceregia etchant - Stainless steel castings - General structure
Glycol - Mg and alloys - Chemical etching
Goeren's amyl picral - Iron and steels - Chemical etching
Gold - - Electrolytic polishing
Gold - - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Attack polishing
Gold - Attack polishing
Gold - Au alloys with less than 90% content of precious metals
Gold - Chemical etching
Gold - Chemical etching
Gold - Electrolytic lapping
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic polishing
Gold - Electrolytic thinning
Gold - Etching for etch pits
Gold - For Au alloys with high content of precious metals
Gold - Pt and Pt alloys, Au and Au alloys
Gold - Pure Au and Au-rich alloys, Pd and Pd alloys
Gold - Pure Au and Pd
Gold alloy - Electrolytic etching
Gold alloys - Chemical etching
Gold and gold alloys - Electrolytic polishing
Gold and high-noble metal alloys - Chemical etching
Gold and precious metals - Chemical etching
Gold etchant for silicon - Si wafers containing alloyed or diffused junctions - Chemical etching
Gold single crystal - Electrolytic polishing
Gold-Silver clad Palladium (Au-Ag, Pd) - Electric contact material
Gold-Silver-platinum (Au-Ag-Pt) - Electric contact material
Gorsuch's etchant - Pure iron
Graff and Sargent's etchant - 2XXX, 3XXX, 6XXX, 7XXX Al alloys - Chemical etching
Grain boundaries in heat treated Cr alloy steels - Chemical etching
Grain boundaries in martensitic microstructures - Chemical etching
Grain boundaries in zinc layer of electrogalvanized steel sheet
Graphite porous - Physical etching
Grard's No. 1 etchant - Cu alloys
Gray cast irons - Color etchant
Green's contrast etchant - Fe + 15-30 Cr + 6-40 Ni + <5%
Groesbeck etchant - Alloys with Cr and or Co
Groesbeck's etchant - High alloy steels and castings - Chemical etching
Groesbeck's etchant - High-alloy steels, cast steels
Groesbeck's etchant - Iron and steels - Chemical etching
Groesbeck's etchant - Stainless steels - Chemical etching
Groesbeck's etchant - Stainless steels - Color etchant
Gypsum single crystal - CaSo4 x 2H2O
H etchant - Ti alloys
H100 etchant - InSb (111) wafers - Chemical etching
H13 tool steel - Electrolytic polishing
HAFNIC 10 alloy - Ni-10Cr-5Al-5Co-8.3Hf-1.1Zr-0.7C
HSLA steels - Chemical etching
HT 12 steel - Fe-0.08C-1.5Mn-0.3Si-0.05Nb - Etch to differentiate old and recently formed ferrite by annealing
Hadfield Mn steel - Fe-1.13C-11
Hafnia - Chemical etching
Hafnia-scandia system - Chemical etching
Hafnium - Attack polishing
Hafnium - Chemical etching
Hafnium - Chemical etching
Hafnium - Chemical polishing
Hafnium - Chemical polishing
Hafnium - Electrolytic polishing
Hafnium - Electrolytic polishing
Hafnium - Electrolytic polishing
Hafnium - Electrolytic polishing
Hafnium - Electrolytic polishing
Hafnium - Hf base alloys
Hafnium - Thinning for transmission electron microscopy (TEM)
Hafnium - Used to polish Hf wires
Hafnium - Zr and Hf base alloys, Zr-Nb alloys
Hafnium - pure and low alloy Hf and Zr for observation in polarized light
Hafnium carbide (HfC) - Chemical polishing
Hafnium diboride (HfB2) - Chemical etching
Hafnium diboride (HfB2) - Chemical etching
Hafnium single crystal - Chemical polishing
Hard Au-Soft Au electroplate - Chemical etching
Hard facing alloys - Phsyical etching
Hard metals - Chemical etching
Hardmetals - Electrolytic polishing
Hasson's etchant - For Mo
Hasson's etchant - Molybdenum, color etchant - Chemical etching
Hasson's etchant - Pure Mo
Hastelloy B, B2, B3, N, and W alloys - Chemical etching
Hastelloy W - Chemical etching
Hastelloy X - Chemical etching
Hastelloy X - Chemical etching
Hastelloy X - Electrolytic etching
Hastelloy X - Ni-22Cr-18.5Fe-9Mo-0.6W
Hastelloy X etching - Electrolytic etching
Hastelloy and Haynes alloys - Electrolytic etching
Hasteloy B - Ni-28Mo-1Fe-0.7Cr+C
Hatch's etchant - For Al and Al alloys
Hayness No. 21 alloy - Electrolytic etching
Hayness No. 21 alloy - Electrolytical etching
Hayness No. 25 alloy - Shows magnetic domain
Hayness No. 30, X40 alloys - Electrolytic etching
Hayness No. 36 alloy - Electrolytic etching
He-Au alloys - Chemical etching
Healy's junction etchant - Si (111) n-type wafers - Acid, junction etcthing
Heat resistant steels - Chemical etching
Heat resisting alloy - One of the best electrolyte for universal use
Heat resisting alloys - Electrolytic polishing
Heat treated 18/8 steels - Chemical etching
Heat treated Ti alloys - Chemical etching
Heat treated steels - Chemical etching
Heat-resisting steels and alloys - Color etching - Colors carbides and phases
Heat-resisting steels and alloys - Color etching
Heat-resisting steels and alloys - Color etching
Heat-resisting steels and alloys - Color etching
Heppenstall's etchant - Inconel 625 alloy - Chemical etching
Heyn's etchant - Low-carbon steels
Hf and Zr alloys, Zr-Nb alloys - Chemical polishing
Hf single crystal wafers and HfN thin films - Chemical cleaning
Hf specimens - Chemical etching
Hf thin films deposited on silicon wafers - Chemical etching
Hf, Zr, and alloys - Electrolytic etching
Hf, Zr, and alloys - Electrolytic etching
Hf, Zr, and alloys - Electrolytic etching
Hf-Al-Pa system - HfAl1.67Pd0.23
Hf-C alloy - Etch for detecting free Hafnium
Hf-C alloys - Chemical etching
Hf-Cr alloy - Electrolytic etching
Hf-Cr alloys - Chemical etching
Hf-Cr and Hf-V alloys - Electrolytic etching
Hf-Er system - Chemical etching
Hf-Er-Sc system - Chemical etching
Hf-Ir system - Chemical and electrolytic etching
Hf-Nb alloys (Hf rich) - Electrolytic polishing and jet electrolytic thinning
Hf-Nb alloys - Chemical etching
Hf-Nb alloys - Chemical polishing and electrolytic polishing
Hf-Nb-B system - Chemical etching
Hf-Nb-Si system - Hf(85-x)Nb(x)Si(15); x< 45
Hf-O system - Chemical etching
Hf-O system - Hf-HfO2 section
Hf-Si system (Hf85Si15) - Electrolytic thinning
Hf-Ta alloys - Chemical polishing
Hf-V alloys - Electrolytic etching
Hf-V, Hf-Cr alloys - Attack polishing
Hf-V-Si system - Hf(85-x)V(x)Si(15); x < 37
Hf-W alloys - Chemical etching
Hf-W alloys - Chemical etching
Hf-Y-O system (HfO2-Y2O3) - Physical etching
Hf3Sn2 single crystal specimens - Chemical etching
HfB-TaB2 - Chemical etching
HfB2 and ZrB2 - Chemical etching
HfB2 with TaB2, ZrB2 - Chemical etching
HfB2-NbB2 - Chemical etching
HfB2-TaB2 - Chemical etching
HfC carbide - Chemical etching
HfN thin film - Chemical cleaning
HfO2 - Chemical etching
HfO2 - Thermal etching
Hg applied as a thin film - Chemical etching
Hg as a smeared surface contact - Ketone, freezing
Hg liquid frozen - Air etching
Hg liquid frozen by submersion in LN2 - Gas etching
Hg liquid frozen into solid form - Gas etching
Hg(1-x)Cd(x)Te (111) wafers - Chemical etching
Hg(1-x)Cd(x)Te single crystal - Chemical polishing
HgAg natural single crystal - Acid, removal
HgCdTe (111) thin films - Chemical etching
HgCdTe (111) wafers - Chemical polishing
HgCdTe (111) wafers and other orientations - Chemical polishing
HgCdTe single crystal ingots and wafers - Chemical etching
HgCdTe single crystal material - Chemical polishing/etching
HgCdTe single crystal wafers - Chemical polishing
HgCdTe specimens - Chemical polishing
HgCdTe thin films - Chemical etching
HgCdTe wafers - Chemical etching
HgI2 single crystals - Ketone, growth
HgO as a native oxide on mercury - Chemical etching
HgSe (111) wafers - Chemical etching
HgSe (111) wafers - Chemical etching
HgSe (111) wafers - Chemical polishing
HgSe - Dislocation etching
HgSe single crystal specimens - Chemical polishing
HgTe (111) wafers - Chemical etching
HgTe (111) wafers - Dislocation etching
HgTe - Dislocation etching
HgTe single crystal wafers - Chemical polishing
High Cr containing alloys, Cr silicide, galvanic Cr layers, Mo-Cr-Fe alloys, U-Nb alloys, V and V-base alloys, ferrovanadium - Electrolytic etching
High alloy content steels - Revelas different structural constituents in high alloy steels
High alloy steels - Electrolytic polishing
High carbon silicon steel - Fe-0.75/1C-2/2.4Si, 0.4/0.8Cr-0.5Mn
High carbon steel - Steel with 1.2% C
High carbon steels - Color etchant
High purity Al, most Al alloys, grain boundaries are preferentially attacked - Chemical etching
High purity alloy of Cu and 10% Zn - Chemical etching
High speed steels - Chemical etching
High speed steels - Chemical etching
High speed steels - Chemical etching
High speed steels - Chemical etching
High speed steels - Electrolytic etching
High speed steels - Electrolytic polishing
High speed steels - Electrolytic polishing
High speed steels - To reveal grain size in quenched and tempered high speed steels
High speed steels, martensitic and stainless steels - Chemical etching
High stregth steels - Extraction of the precipitates
High temperature CrMoN steels - Electrolytic polishing
High temperature CrMoN steels - Electrolytic polishing
High temperature nickel alloys - Chemical and Electrolytic etching
High temperature supercondictors (YBa2Cu3O7) - For revealing grain boundaries, twin boundaries and cracks
High-Cr cast irons - Chemical etching
High-Si irons - Chemical etching
High-Si irons and steels - Chemical etching
High-alloy steels - Electrolytic etching
High-alloy, corrosion-reistant steels - Chemical etching
High-purity U - Electrolytic etching
High-purity martensitic Fe-C alloys - Chemical etching
High-temperature alloys - Electrolytic polishing
Ho single crystal specimens - Thermal etching
Ho-Ag alloys - Chemical etching
Ho-Bi system - Chemical etching
Ho-Co alloy sputter deposited on Glass and NaCl, (100) substrates - Ionized gas cleaning
Ho-Fe alloys - Chemical etching
Ho-Fe alloys - Chemical etching
Ho-Tb alloys - Electrolytic polishing
Ho2Co14Fe3 specimens - Chemical polishing
Ho2O17 specimens - Chemical polishing
HoCu2Ge2 single crystal specimens - Chemical etching
Holmium specimens - Chemical etching
Holmium specimens - Electrolytic polishing
Holmium specimens - Sample preparation procedure
Hone and Pearson's anodizing solution - Pure Al - Chemical etching
Hone and Pearson's anodizing solution - Pure Al - Chemical etching
Hordon's etchant - Al-Cu alloy - Alloy with 7.5 at.% Al
Hot-dipped galvanized steels - Chemical etching
Howarth's etchant - Carbon and alloy steels - For detection of overheating and burning
Howarth's etchant - Carbon and alloy steels with medium carbon content - Detection of overheating and burning
Howarth's etchant - Fe + <1C + <4% additions
Huber and Linh's H etchant - For etch pits on InP
Hydal's etchant - For InBiSn
Hydrated tricalcium silicate - Chemical etching
Hydrated tricalcium silicate - Chemical etching
Hydrated tricalcium silicate iron oxide system - Chemical etching
Hydride in Zr-Nb alloys - Chemical etching
Hydrides in Ti, alpha-beta alloys - Chemical etching
Hydrochloric acid (HCl) - Gas cleaning
Hydroxyapatite - Ca5(PO4)3 x OH
Hypo etchant - AgCl (100) oriented material - Chemical etching
Hypoeutectoid and hypereutectoid alloy steels - Chemical etching
I.M.I. 685 alloy - Ti-6Al-6Zr-0.5Mo-0.25Si
IF steel - EBSD sample preparation - Dislocation etching
IN 100 alloy - 56.1Ni-5.0Al-4.5Ti-12Cr-3.2Mo-18.4Co-0.8V-0.09C (+B) by weight
IN 738 alloy - Electrolytic-potentiostatic isolation of residues
IN 738 alloy - Sample preparation
Identification of intermetallic phases in Al alloys - Chemical etching
In (100) wafers - Chemical etching
In and lean alloys - Chemical etching
In as pellets - Chemical cleaning
In preform sheet alloyed on germanium (111) wafer - Chemical etching
In rich alloys - Chemical etching
In single crystal ingot - Chemical etching
In single crystal wires - Electrolytic etching
In specimens - Chemical etching
In, In-Sb and In-As alloys - Chemical etching
In-738 superalloy - Ni-0.2C-3.5Al-3.6Ti-8.4Co-15.75Cr-1.7Mo-0.9Nb-1.8Ta-2.8W
In-Bi alloys - Chemical etching
In-Bi alloys - Chemical etching
In-Bi eutectic alloy specimen - Chemical etching
In-Bi-Sn alloys - InBi-BiSn subsystem
In-Fe alloys - Chemical etching
In-Ga-As system - Preferential etch to delineate from Gallium arsenide
In-Ga-As system - Preferential etch to delineate from indium phosphide
In-La system - Electrolytic polishing
In-Sb alloys - Chemical etching
In-Sb alloys - Chemical etching
In-Sb alloys - Chemical etching
In-Sb system - For revealing the segregation
In-Sb-Pb alloys - Chemical etching
In-Sn-Te alloy - In2Te3-SnTe section
In-Te-Bi alloys - In2Te3-Bi2Te3 section
In-Te-Bi alloys - InTe-InBi system
In-Ti alloys - Electrolytic etching
In-Zn alloys - Chemical etching
In-Zn alloys - Chemical etching
In203 specimens - Chemical etching
In2O3 (1010) deposited oriented thin film - Chemical etching
In2O3 (1010) grown as an oriented thin film - Chemical etching
In2O3 (1010) oriented thin films - Chemical etching
In2O3 as thin film - Chemical etching
In2O3 specimens - Chemical etching
In2O3 specimens - Chemical etching
In2Te3 specimens - Chemical polishing
In2Tl3 single crystal ingots - Chemical polishing
In5Bi3 single crystal specimens - Chemical polishing
InAs (100) n-type wafers - Chemical polishing
InAs (100), n-type wafers - Chemical etching
InAs (110), n-type wafers - Chemical polishing
InAs (111) wafers - Chemical etching
InAs (111) wafers - Chemical etching
InAs (111) wafers - Chemical etching
InAs (111) wafers - Chemical etching
InAs (111) wafers - Chemical etching
InAs (111) wafers - Dislocation etching
InAs (111) wafers and other orientations - Thermal processing
InAs (111) wafers used in X-ray studies - Chemical etching
InAs specimens - Chemical cleaning
InAs specimens - Chemical etching
InAs(x)P(x-1) polycrystalline ingot - Chemical polishing
InGaAs (001) thin film - Chemical etching
InGaAs (100) wafer - Chemical cleaning
InGaAsP as thin film layers - Chemical etching
InGaAsP epitaxy thin films - Chemical etching
InGaAsP thin film layer grown by LPE - Chemical etching
InGaSb deposited as a thin film on BaF2 substrate (111) - Chemical thinning
InGe used as a deposited Au/InGe alloy contact on (100) InP and GaAs wafers - Chemical etching
InP (100) Sn doped wafers - Chemical etching
InP (100) Zn doped p-type wafers - Chemical etching
InP (100) cleaved wafers - Chemical etching
InP (100) n-type wafers - Chemical cleaning
InP (100) n-type wafers - Chemical etching
InP (100) n-type wafers - Chemical etching
InP (100) n-type wafers - Chemical etching
InP (100) n-type wafers - Chemical native oxide removal
InP (100) n-type wafers - Chemical polishing
InP (100) p-type wafers - Chemical etching
InP (100) tin-doped, n-type wafer - Chemical etching
InP (100) wafer - Chemical etching
InP (100) wafer - Chemical etching
InP (100) wafer fabricated as Schottky diodes - Chemical polishing
InP (100) wafer substrates - Halogen, grooving
InP (100) wafer used as a substrate - Acid oxidation
InP (100) wafers - Chemical cleaning
InP (100) wafers - Chemical etching - A/B etchant, modified
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical etching
InP (100) wafers - Chemical polishing
InP (100) wafers - Chemical polishing
InP (100) wafers - Chemical polishing
InP (100) wafers - Chemical polishing/etching
InP (100) wafers - Chemical thinning
InP (100) wafers - Electrolytic etching
InP (100) wafers - Electrolytic etching
InP (100) wafers - Electrolytic oxidizing
InP (100) wafers - Acid, stain
InP (100) wafers - Ionized gas
InP (100) wafers - Ionized gas, removal
InP (100) wafers - Physical etrching
InP (100) wafers - Thermal cleaning
InP (100) wafers Cut 3?-off toward (110) - Chemical polishing
InP (100) wafers cut within 1? of plane - Chemical polishing
InP (100) wafers fabricated as Schottky diodes - Junction stain
InP (100) wafers used as substrates - Chemical etching
InP (100) wafers used as substrates for InP epitaxy - Chemical etching
InP (100) wafers used as substrates for LPE deposition of InGaAsP - Chemical etching
InP (100) wafers used as substrates for LPE of InGaAsP - Chemical etching
InP (100) wafers used for epitaxy growth of InGaAs/InGaAsP - Metal, etch-back
InP (100) wafers used for zinc deposition and anneal - Chemical thinning
InP (100) wafers used in a dislocation study - Dislocation etching
InP (100) wafers with channels in (011) and (011) directions - Chemical etching
InP (100) wafers with or without thin film InGaAsP epitaxy - Chemical etching
InP (100) wafers, S doped n-type - Ionized gas cleaning
InP (100) wafers, Zn doped p-type - Chemical etching
InP (100), n-type, 0.3-0.4 Ohm cm resistivity, and p-type, 7-8 Ohm cm wafers - Chemical cleaning
InP (110) wafer cleaved under UHV - Chemical polishing
InP (111) wafers - Chemical etching
InP (111) wafers - Chemical etching
InP (111) wafers - Chemical etching
InP (111) wafers - Chemical etching
InP (111) wafers - Chemical polishing
InP (111) wafers grown by LEC - Chemical etching
InP (111) wafers grown by LEC - Chemical polishing
InP (111)A and (100) wafers - Chemical etching
InP - Dislocation etching
InP ingot cut longitudinally on the (112) axis - Dislocation etching
InP ingot grown by LEC doped with both Ga and Sb - Dislocation etching
InP p-type single crystal wafers - Chemical polishing
InP-Fe (100) (SI) wafers - Chemical polishing
InP-Fe (100) wafers - Chemical cleaning
InPFe (100) (SI) wafers - Chemical etching
InPFe (100) (SI) wafers - Chemical etching
InPFe (100) (SI) wafers - Chemical etching
InPFe (100) (SI) wafers - Chemical polishing
InPFe (100) n-type wafers - InPFe (100) n-type wafers
InPFe (100) wafers - Chemical cleaning
InPFe (100) wafers used as substrates for MISFETT and EMISFET device fabrication - Chemical etching
InPFe (100) wafers within 5? of plane - Chemical etching
InPZn epitaxy film grown by LPE - Chemical etching
InS (100) and (110) wafers - Chemical polishing
InSb (001) wafers - Alcohol cleaning
InSb (100) and (110) wafers - Chemical etching - Etchant No. 1
InSb (100) n-type wafers - Chemical etching
InSb (100) n-type wafers used in a study of adsorption coefficients
InSb (100) n-type wafers zinc diffused - Chemical cleaning
InSb (100) wafers - Chemical etching
InSb (100) wafers - Chemical polishing
InSb (100) wafers - Chemical polishing
InSb (100) wafers - Chemical polishing
InSb (100) wafers - Chemical polishing
InSb (100) wafers - Ionized gas cleaning
InSb (100) wafers - Oxide removal
InSb (100) wafers and other orientations - Chemical polishing
InSb (100), (111)A and (111)B oriented wafers - Chemical etching
InSb (110) n-type and (100) p-type wafers - Chemical polishing
InSb (111) p-type wafers - Chemical polishing
InSb (111) specimens - Chemical etching
InSb (111) wafers - Chemical etching - /polishing
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical etching
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Chemical polishing
InSb (111) wafers - Electrolytic anodization
InSb (111) wafers - Electrolytic anodizing
InSb (111) wafers - Thermal etching
InSb (111) wafers - Ketone cleaning
InSb (111), (112) and other bulk orientations - Chemical polishing
InSb (111)A, (TTT)B and (100) wafers - Chemical cleaning
InSb (311) and (110) wafers - Electrolytic polishing
InSb (311) wafers - Chemical etching
InSb (311) wafers - Chemical polishing
InSb - Dislocation etching
InSb - Dislocation etching
InSb - Etchant for revealing twin planes
InSb cylinder - Chemical etching
InSb specimen - Chemical etching
InSb specimens - Etchant for revealing twin lamellae by staining (211) and etching the (211)
InSb thin films - Chemical polishing
InSb-Te (111) n-type wafers - Chemical cleaning
InSe (0001) as hand cleaved wafers - Chemical etching
InSn alloy specimen - Electrolytic etching
InSnO2 single crystal - Acid, flux, removal
Incaloy 800 - 19Cr-30Ni-45Fe+ C, Mn, P, S, Cu, Si, Al, Ti
Incaloy 800 - 44Fe-31Ni-21.6Cr-1Mn-0.5Cu-0.4Ti-0.4Al-0.3Si
Inco 713LC superalloy - Electrolytic etching
Inconel - Electrolytic polishing
Inconel 600 - Chemical etching
Inconel 617 - 54Ni-22Cr-12.5Co-9Mo-1Al-0.07C
Inconel 686 - Chemical etching
Inconel 690 - Chemical etching
Inconel 718 - For SEM examination to view gamma double prime in alloy 718 (no gamma prime)
Inconel 718 - Ni-0.5Al-0.05C-5Nb-0.2/0.4Co-18Cr-18/20Fe-3Mo
Inconel 718 - Ni-17Cr-22Fe-1Co-5Nb-0.8Ti-0.6Al-0.05C
Inconel 718 alloy - Chemical etching
Inconel X550, Inco 700, Waspaloy, M252 - Chemical etching
Inconel X550, Inco 700, Waspaloy, and M252 - Chemical etching
Indium - Dislocation etching
Indium - Electrolytic mechanical polishing
Indium - Electrolytic polishing
Indium - Electrolytic polishing
Indium - Electrolytic polishing
Indium - Electrolytic polishing
Indium - Electrolytic thinning
Indium - For etch pits etching
Indium - In and In rich alloys
Indium antimonide (InSb) - Chemical etching
Indium antimonide (InSb) - Chemical etching
Indium antimonide (InSb) - Chemical etching
Indium antimonide (InSb) - Chemical etching
Indium antimonide (InSb) - Chemical etching
Indium antimonide (InSb) - Chemical polishing
Indium antimonide (InSb) - Chemical polishing
Indium antimonide (InSb) - Chemical polishing and etching
Indium antimonide (InSb) - Chemical polishing and etching
Indium antimonide (InSb) - Electrolytic polishing
Indium antimonide (InSb) - Etch pit etching
Indium antimonide (InSb) - For etch pits
Indium antimonide (InSb) - Shallow etch pits are produced on (111) face
Indium arsenide (InAs) - Chemical etching
Indium arsenide (InAs) - For etch pits
Indium arsenide (InAs) - For revealing the defect density
Indium oxide (In2O3) - Etch pits etching
Indium phosphide (InP) - Chemical etching
Indium phosphide (InP) - Chemical etching
Indium phosphide (InP) - Chemical etching
Indium phosphide (InP) - Chemical polishing
Indium phosphide (InP) - Chemical polishing
Indium phosphide (InP) - Chemical polishing and etching
Indium phosphide (InP) - Chemical thinning
Indium phosphide (InP) - Dislocation etching
Indium phosphide (InP) - Dislocation etching
Indium phosphide (InP) - Etch for dislocations on (111)P, (100) and (110) faces
Indium phosphide (InP) - Etch pit etch for (111) face
Indium phosphide (InP) - Etch pits etch for (111) faces
Indium phosphide (InP, (001) face) - Chemical polishing
Indium phosphide arsenide (InP(x)As(1-x)) - Etching for etch pits
Indium single crystal - Chemical etching and polishing
Indium specimens - Chemical etching
Insb (111) wafers - Chemical etching
Intergranular oxidation in AISI 4150 steel - Chemical etching
Intermetallic compounds - Chemical ecthing
Invar-Tin alloy (Fe-Ni-Sn)-62Fe-35Ni-3 at.% Sn
Iodate etchant- PbTe (100) wafers - Chemical etching
Iodide Ti - Electrolytic etching
Iodide titanium - Chemical polishing
Iodine A etchant - Ba2TiO3 (111) and (100) wafers, single crystals - Chemical etching
Iodine etchant - Si (111) wafers, boron doped - Chemical etching
Iodine-doped bismuth telluride - Stain etching
Ir alloys - Electrolytic etching
Ir, Rh - Electrolytic etching
Ir-Mo system - Chemical etching
Ir-W alloy - Ir-0.3% W
Iridium - Chemical etching
Iridium - Electrolytic etching
Iridium - Electrolytic etching
Iridium - Electrolytic etching
Iridium - Electrolytic etching
Iridium - Electrolytic etching
Iridium specimen - Electrolytic etching
Iridium specimen - Electrolytic etching
Iridium specimen - Electrolytic thinning
Iridium specimen - Electrolytic thinning
Iridium specimen - Electrolytic thinning by window technique
Iridium specimen - Pt alloys, Rh, Ir
Iridium specimen - Rh base alloys, Pt-10% Rh alloys, Ir alloys, pure Pt and Pt alloys, Ru base alloys
Iron - Dislocation etching
Iron - Dislocation etching
Iron - Dislocation etching
Iron - Dislocation etching
Iron - Dislocation etching
Iron - Dislocation etching
Iron - Dislocation etching
Iron and iron alloys - Electrolytic polishing
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Chemical etching
Iron and steels - Electrolytic polishing
Iron and steels - Electrolytic polishing
Iron and steels - Etchant for determination of chemical and physical hetrogenity
Iron and steels - Potentiostatic etching
Iron and steels - Potentiostatic etching
Iron and steels - Potentiostatic etching
Iron and steels - Potentiostatic etching
Iron and steels - Thermal etching
Iron disilicide (FeSi2) - Chemical thinning
Iron oxide layers on iron - Chemical etching
Iron oxide layers on iron - Chemical etching
Iron oxide layers on iron - Chemical etching
Iron oxide layers on iron - Chemical etching
Iron oxide layers on iron - Electrolytic etching
Iron oxide scale - Chemical etching
Iron oxide scale - Chemical etching
Iron oxide scale - Fe2O3 - Chemical etching
Iron oxide scale - Fe2O3 - Chemical etching
Iron oxide scale - Fe3O4 - Chemical etching
Iron oxide scale - Fe3O4 - Chemical etching
Iron oxide scale - Fe3O4 - Chemical etching
Iron oxide scale - Fe3O4 - Electrolytic etching
Iron oxide scale - Fe3O4 - Electrolytic etching
Iron oxide scale - Fe3O4 - Electrolytic etching
Iron oxide scale - Fe3O4 - Electrolytic etching
Iron oxide scale - FeO - Chemical etching
Iron oxide scale - FeO - Electrolytic etching
Iron specimen - Chemical polishing
Iron specimen - Chemical polishing
Iron specimen - Chemical polishing
Iron specimen - Chemical polishing and etching
Iron specimen - Chemical polishing in hot etchant
Iron specimen - Chemical thinning
Iron specimen - Chemical thinning
Iron specimen - Chemical thinning
Iron specimen - Chemical thinning
Iron specimen - Dislocations in alpha-Fe whiskers
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic polishing
Iron specimen - Electrolytic thinning
Iron specimen - Electrolytic thinning
Iron specimen - Electrolytic thinning
Iron specimen - Electrolytic thinning
Iron specimen - Electrolytic thinning
Iron specimen - Electrolytic thinning by Bollman technique
Iron specimen - Electrolytic thinning by Mirand-Saulnier technique
Iron specimen - Electrolytic thinning by low voltage technique
Iron specimen - Electrolytic thinning by modified Mirand-Saulnier technique
Iron specimen - Electrolytic thinning by modified voltage technique
Iron specimen - Electrolytic thinning by window technique
Iron specimen - Electrolytic thinning in PTFE holder
Iron specimen - Electrolytic thinning using A.C.
Iron specimen - Good general-purpose electrolyte
Iron specimen - Physical etching
Iron specimen - Universal electrolyte
Iron, steels, cast irons - Austenite grain boundaries
Iron, steels, cast irons - Austenite grain boundaries in case hardened steels
Iron, steels, cast irons - Austenite grain boundaries in cold work steel
Iron, steels, cast irons - Austenite grain size boundaries in cold work steels
Iron, steels, cast irons - Austenite grain size boundaries in tempered steels and case hardened steels
Iron, steels, cast irons - Carbides and phosphides in low alloy steels
Iron, steels, cast irons - Carbides, nitrides, phosphides, and sulfides are not attacked
Iron, steels, cast irons - Cementite (Fe3C) with up to 10% Cr is stained dark
Iron, steels, cast irons - Cr and Cr-Ni steels
Iron, steels, cast irons - Differntiation of cubic and tetragonal martensite
Iron, steels, cast irons - Fe-Cr-Ni cast alloy
Iron, steels, cast irons - Fe3C with more thn 10% Cr is stained more rapidly than Fe3C with less than Cr
Iron, steels, cast irons - Grain boundaries in heat treated tool steel
Iron, steels, cast irons - Grain boundaries in martensitic microstructures
Iron, steels, cast irons - Grain contrast of ferrite in low carbon steels
Iron, steels, cast irons - High alloy Cr-Ni steels
Iron, steels, cast irons - High alloy steels
Iron, steels, cast irons - Increases attack of Fe in alloyed steels
Iron, steels, cast irons - Mn alloyed Cr-Ni steels- Sigma phase and ferrite
Iron, steels, cast irons - Most common etchant
Iron, steels, cast irons - Sigma phase etching
Iron, steels, cast irons - Stainless steels with high Cr content, Cr-Ni cast steels
Iron, steels, cast irons - Steels with high Si content
Iron, steels, cast irons - Verification of sigma phase
Iron-manganese alloys - Electrolytic polishing
Iron-oxide layers on iron - Physical etching
Iron-oxide layers on iron - Physical etching
Iron-oxide layers on iron-Fe2O3 - Chemical etching
Iron-oxide layers on iron-Fe3O4 - Chemical etching
Iron-oxide layers on iron-Fe3O4 - Chemical etching
Iron-oxide layers on iron-FeO - Chemical etching
Iron-oxide layers on iron-FeO-Fe3O4-Fe2O3 - Chemical etching
Iron-oxide layers on iron-FeO-Fe3O4-Fe2O3 - Chemical etching
Iron-technetium system (Fe-Tc) - Fe-0.1 wt.% Tc
Iron-thorium (Fe-Th) - Th-2% Fe
Isotropic silicon etches of wafers - Chemical etching
Jacquet's etchant - Al, single crystal
Jacquet's etchant - Aluminium - Etching for etch pits
Jacquet's solution - For Al - Electrolytic polishing
Jewitt-Wise's etchant - Ni specimens - Chemical etching
Jong's color etchant - OFHC copper - Tint etching
K specimens - Alcohol polishing
K specimens - Alcohol polishing
K specimens - Chemical polishing
K specimens - Ketone polishing
K42B alloy - Chemical etching
KBr (001) wafers - Chemical etching
KBr (100) cleaved wafers - Chemical etching
KBr (100) wafers and single crystals - Water polishing
KBr - Dislocation etching
KBr and KI single crystal specimens - Solvent polishing
KBr specimens - Chemical etching
KBr, KCl - Dislocation etching
KCl (001) cleaved wafers - Chemical etching
KCl (100) cleaved wafers - Chemical etching
KCl (100) cleaved wafers - Chemical polishing
KCl (100) cleaved wafers - Gas etching
KCl (100) specimens - Chemical cleaning
KCl (100) wafers - Chemical etching
KCl (100) wafers - Alcohol cleaning
KCl (111) and (100) cleaved wafers - Chemical cleaning
KCl - Dislocation etching
KCl - Dislocation etching
KCl formed as dendritic structure - Acid, defect
KCl single crystal specimens - Acid forming
KCl single crystal specimens - Acid forming
KI (100) cleaved wafers - Chemical etching
KI (100) cleaved wafers - Chemical etching
KI (100) wafers - Chemical etching
KI (100) wafers - Alcohol polishing
KI - Dislocation etching
KI and KBr single crystal specimens - Polishing
KKI etchant - InP (100) wafers - Chemical etching
KMnFe3 single crystal sphere
KOH etching of silicon wafers I - Chemical etching
KOH etching of silicon wafers II - Chemical etching
KTaO3 iron doped single crystal wafer - Abrasive polishing
Kalling's 1 etchant - Martensitic stainless steels
Kalling's 1 etchant - Martensitic, stainless steels - Chemical etching
Kalling's 2 etchant - Ni-Cu alloys and Ni-base superalloys - Chemical etching
Kalling's 2 etchant - Stainless steel castings - General structure
Kalling's 2 etchant - Stainless steels - Chemical etching
Kalling's 2 etchant - Stainless steels - Chemical etching
Kalling's 2 etchant - Stainless steels, Ni-Cu alloys, Ni-base superalloys
Kalling's I etchant - Stainless steels - Chemical etching
Kalling's etchant - Cr stainless steels - Chemical etching
Kalling's etchant - Ho2Fe17 and Ho2Co14Fe3 specimens - Chemical etching
Kalling's etchant - Nickel specimens T.D. grade - Chemical etching
Kalling's etchant - SST 400 series - Chemical etching
Kalling's etchant - UCe2 specimen - Chemical polishing
Kalling's etchant - UCo2 specimen - Chemical polishing
Kalling's etchant - UNi2 specimen - Chemical polishing
Kalling's etchant - UPt3 specimen - Chemical polishing
Kalling's etchant - Wrought Fe-Ni-Cr heat resisting alloy - U-700 (AISI 687) - General structure
Kalling's etchant - Wrought heat-resistant steels
Kalling's etchant - Y2(CoM)17 single crystal ingots - Chemical polishing
Kallings 2 etchant - Ni-Cu alloys and superalloys - Chemical etching
Kallings's etchant - Wrought stainless steels - General structure
Kallings's etchant - Wrought stainless steels - General structure
Keller and Geisler's anodizing solution - Al and Al alloys - Chemical etching
Keller' etchant, modified - Ni-Cr-Th alloy - Ni-20Cr-2ThO2
Keller's etchant - Al and Al alloys - Chemical etching
Keller's etchant - Al-Cu-Ag-Mg-Ti alloy - 4.7% Cu, 0.6% Ag, 0.3% Mg, 0.3% Al, 0.2% Ti
Keller's etchant - Al-Cu-Ti alloy - Alloy with 4% Cu, and 0.1% Ti
Keller's etchant - Al-Ni system - Al-Al3Ni eutectic
Keller's etchant - Al-Zn-Mg alloy
Keller's etchant - Al-Zn-Mg alloy - Chemical etching
Keller's etchant - Al-Zn-Mg-Cu alloy - 7075 alloy 5-3% Zn, 2-7% Mg, 1.6 Cu
Keller's etchant - Al-Zn-Mg-Cu alloys (+Cr, Ti) - Chemical etching
Keller's etchant - Aluminium (99.945%) - Dislocation etching
Keller's etchant - Aluminium
Keller's etchant - Deep-etching of Al-Si - For most aluminum and aluminum alloys
Keller's etchant - RE-Al alloys - Chemical etching
Keller's etchant - Sleeve bearing materials (Pb, Al)-Pb-Sn-Cu overlay on Al-Cd alloy
Keller's etchant - Ti alloys - Chemical etching
Keller's etchant - Ti alloys - Chemical etching
Keller's etchant - Ti, Ti-Al alloys - Dislocation etching
Keller's etchant 1 - Pure Al and Al alloys, Ti alloys, RE-Al alloys
Keller's etchant 2 - For Al and Al alloys
Keller's etchant, diluted - Aluminium 7075, 7475 alloy - Al-5.1/5.7 Zn-2.1/2.3 Mg-1.5 Cu-0.2 Cr
Keller's etchant, modified - Al and Al alloys - Chemical etching
Keller's etchant, modified - Al and Al alloys - Chemical etching
Keller's etchant, modified - Al and Al alloys - Chemical etching
Keller's etchant, modified - Aluminium alloys - Alloy 7075, recrystalliyed
Klemm's I etchant - Alpha and beta brass - Tint etching
Klemm's I etchant - Iron and steels - Chemical etching
Klemm's I etchant - Iron and steels - Chemical etching
Klemm's I etchant - Pure Zn and low-alloy Zn - Chemical etching
Klemm's I etchant - Tint etchant for steels
Klemm's I etchant - Zn and lean alloys - Chemical etching
Klemm's I tint etchant - Brass, bronze
Klemm's II etchant - Alpha brass - Tint etching
Klemm's II etchant - Tin - Chemical etching
Klemm's II etchant - Tint etchant for steels
Klemm's II tint etchant - Steels, alpha brass, tin alloys
Klemm's III etchant - Bronze alloys - Tint etching
Klemm's III etchant - Ni alloys - Tint etching
Klemm's III tint etchant
Klemm's etchant
Klemm's etchant - Temper embrittlement in steels - Chemical etching
Klemm's etchant I - Etches segregations in unalloyed and low alloy steels - Chemical etching
Klemm's etchant I - Unalloyed and low-alloy steels, cast irons, Mn steels, pure Zn and low-alloy Zn
Klemm's etchant II - Cu and Cu alloys and soft solders
Klemm's etchant II - Cu and Cu alloys with soft solders - Chemical etching
Klemm's etchant III - Pure Cu and Cu alloys
Klemm's etchant III - Pure Cu, leaded bronze, bronzes, alpha/beta brasses, Al bronze, Be bronze - Chemical etching
Kodak's EB-5 etchant - Cr thin films - Chemical etching
Kovar alloy - Electrolytic etching
Kovar specimens - Chemical etching
Kovar specimens - Chemical polishing
Kovar specimens - Chemical polishing
Kovar, cemented carbides - Chemical etching
Kr (100) solid single crystal ingots - Pressure
Kr used as a gas ambient component in the RF magnetron sputter deposition of NbN thin films
Kroll's etchant - For most Ti materials, especially for Ti-Al-V-(Sn) alloys - Chemical etching
Kroll's etchant - Suited especially for Al-Cu alloys - Chemical etching
Kroll's etchant - Ti alloys - Chemical etching
Kroll's etchant - Ti and alloy - Ti-6Al-2Sn-1.5Zr-1Mo-0.35Bi-0.1Si
Kroll's etchant - Ti-Al-Mo alloy - 5.8-9.7% Al, 0.5-8.2% Mo
Kroll's etchant - Ti-Al-O alloy - Ti-6-10% Al-0.04-0.12% O
Kroll's etchant - Ti-Al-V alloy (6Al-4V) - Chemical etching
Kroll's etchant - Ti-Mo alloy - Ti-26Mo
Kroll's etchant - Ti-Mo-V-Al-Fe alloy - Ti-8Mn-8V-3Al-2Fe
Kroll's etchant - Ti-Mo-Zr-Sn alloy - Ti-11Mo-6.6Zr-4.6Sn
Kroll's etchant - Ti-Ni alloys - Chemical etching
Kroll's etchant - Ti-V-Cr-Zr-Mo-Al alloy - Ti-8V-6Cr-4Zr-4Mo-3Al
Kroll's etchant - Titanium - For many Ti raw materials, especially for Ti-Al-V alloys
Kroll's etchant - Titanium and titanium alloy
Kroll's etchant - Titanium and titanium alloys - General purpose etch - For most titanium alloys
Kroll's etchant 1 - Al-Cu alloys, Ti alloys, mainly Ti-Al-V (Sn) alloys
Kroll's etchant 2 - For Ti/Al
Krumm's etchant - Al thin films evaporated on GaAs, (100) wafer substrates
LBH etchant, modified - Steels - Chemical etching
La and Ce - Chemical etching
La specimens - Arc forming
La specimens - Chemical polishing
La, U and Th used as pressed powders - Pressure
La-Ag alloys - Chemical etching
La-Au alloys - Chemical etching
La-Bi system - Chemical etching
La-Co alloys (Approx. LaCo5) - Chemical etching
La-Co system - Chemical etching
La-Co-Cu alloy - (Co,Cu)5La
La-Pd alloy - Approx. La3Pd4
La-Rh system - Chemical ecthing
LaB single crystal filaments - Electrolytic polishing
LaB6 single crystal specimens - Acid, forming
LaB6 specimen - Ceramic compunds
LaB6, TaB2 - Electrolytic etching
LaBr3 (100) wafers - Chemical polishing
LaCu6 single crystal - Chemical etching
LaPera's etchant - For steels
LaPera's etchant - Low alloy dual-phase and TRIP steels - Chemical etching
LaPera's etchant - TRIP steel - Chemical etching
LaSrCoO3 single crystals - Chemical etching
LaSrCoO3 single crystals cleaved (001) - Salt polishing
LaSrFeO3 single crystals - Chemical etching
Laced picric acid etchant - Martensitic chromium steels - Chemical etching
Lacombe and Beaujard's etchant - Al and Al alloys - Chemical etching
Landyren's etchant - Si (111) wafers and other orientations - Chemical etching
Lanthanides (Rare Earths) - For most Rare Earths metals and their alloys
Lanthanides (Rare Earths) - For most Rare Earths metals and their alloys
Lanthanum - Chemical polishing and etching
Lanthanum - Electrolytic polishing
Lanthanum - Electrolytic polishing
Lanthanum - Electrolytic thinning
Lanthanum boride (LaB4) - Electrolytic etching
Lanthanum doped barium titanate - Thermal etching
Lead - All Pb alloys - Hard lead - High Pb white metals and type metals
Lead - Chemical and electrolytic etching
Lead - Chemical etching
Lead - Chemical polishing
Lead - Dislocation etching
Lead - Electrolytic etching
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Electrolytic polishing
Lead - Grain contrast
Lead - Lead solder - Pb-Sb alloys and high Pb white metals and type metals
Lead - Lead solders - Pb-Sn alloys
Lead - Pb and Pb alloys - Hard lead and high Pb white metals and type metals
Lead - Pb, Pb-Sb and Pb-Sn alloys
Lead - Pb, Pb-Sn, Pb-Cd, Pb-Ca alloys - Pb containing Cu and bronzes
Lead - Pure Pb, Pb-Sb, Pb-Ca alloys - Grain boundaries
Lead - Universal electrolyte
Lead alloys - Electrolytic polishing
Lead and lead alloys - Chemical etching
Lead and lead alloys - Chemical etching
Lead and lead alloys - Chemical etching
Lead and lead alloys - Chemical etching
Lead and lead alloys - Electrolytic etching
Lead and lead alloys - Electrolytic etching
Lead and lead alloys - Electrolytic polishing
Lead arsenic alloys (Pb-As) - For lead rich alloys
Lead free solder - Chemical etching
Lead glass (PbO-SiO2) - 25/35 mol.% PbO-75/65 mol.% SiO2
Lead niobate (modified) - Grain boundary etching
Lead oxide-boric oxide glass - Chemical etching
Lead oxide-vanadium oxide-germanium oxide glass (Ge-O-Pb-V) - 4/55 V2O5-1/36 PbO-65/9 GeO2
Lead single crystal - Chemical polishing
Lead specimen - Chemical etching
Lead specimen - Chemical etching
Lead sulphide (PbS) - Chemical polishing
Lead sulphide (PbS) - Chemical polishing and etching
Lead sulphide (PbS) - Sample preparation
Lead sulphide (PbS) - To delineate p-n junction
Lead sulphide-selenide (PbS(0.6)Se(0.4)) - To delineate p-n junction
Lead telluride (Pb-Te) - Chemical polishing
Lead telluride (Pb-Te) - Chemical polishing and etching
Lead telluride (Pb-Te) - Electrolytic polishing
Lead telluride (Pb-Te) - Etching for etch pits
Lead telluride (Pb-Te) - Ething for etch pits
Lead telluride (Pb-Te) - Polishing procedure
Lead telluride (Pb-Te) system - Electrolytic polishing
Lead-lanthanum zirconate titanate - (Pb-La) (Zr-Ti)O3
Lead-strontium-titanate zirconate - (Pb0.94Sr0.06) x (Zr0.53Ti0.43)O3
Lead-strontium-titanate zirconate - Thermal etching
Lenoir's etchant - Al-Zn-Mg alloy
Lenoir's etchant, modified - Cu-Al-Mn alloy - Alloys with 3-4% Cu, 0.5 Mn
Lenoir's solution - Ag-Al alloy - Alloy with 5% Ag
Lenoir's solution - Al-Zn-Mg alloy - Alloy with 6.86 wt.% Zn, 2.5 wt.% Mg
Lenoir's solution - For Al and U
Lenoir's solution - Nimonic PE16 alloy
Lenoir's solution, modified - Ag-Al-Cd alloy - 4.8 at.% Ag, 0.15 at.% Cd
Lenoir's solution, modified - Ag-Al-Cu alloy - 4.8 at.% Ag, 0.2 at.% Cu
Lenoir's solution, modified - Al-Cu alloy - Alloys with 1-5% Cu
Lenoir's solution, modified - Al-Cu-Mg alloy - Alloys with 1-5% Cu, 0.5-1.5% Mg
Lepito's etchant
Lepito's etchant
Lepito's etchant - Stainless steel
Levenstein-Robinson's etchant (and (Hen-Hen) Rickson's modification) - For Ag
Levenstein-Robinson's etchant - Silver single crystal - Chemical polishing and etching
Levinstein and Robinson's etchant - Silver - Chemical polishing
Li applied as molten LiOH on rutile - Salt removal
Li fluoride - Chemical polishing
Li powder in oil - Diffision
Li samples - Chemical etching
Li single crystal spheres - Thermal forming
Li specimens - Chemical etching
Li specimens - Chemical polishing
Li tantalate-silicon-alumina system - Chemical etching
Li(x)WO3 (blue) and Li(x)WO3 - Oxide, growth
Li-Al orthosilicate - Li2O x Al2O3 x 3,4 as 8 SiO2
Li-Ba-Ti-Zr glass - 73% SiO2, 14% Al2O3, 8.7% Li2O, 1.75% BaO, 1.5% TiO2, 1% ZrO2 (+ NdO2)
Li-Se alloys
Li-Se-Rb-Br system - Li2Se-Se-(LiBr/RbBr eutectic)
Li-Zn ferrite - Li0.44 x Zn6.09 x Fe2.47 x O4
Li3Bi single crystal ingots - Chemical polishing
LiBr (100) cleaved wafers - Chemical etching
LiCl cleaved wafers - Chemical etching
LiCl wafers - Dislocation etching
LiF (100) and (111) wafers - Chemical etching
LiF (100) cleaved wafers - Dislocation etching
LiF (100) single crystal specimens - Chemical etching
LiF (100) wafers - Chemical etching
LiF (100) wafers - Chemical etching
LiF (100) wafers - Chemical etching
LiF (111) cleaved wafers - Ulrasonic vibration
LiF - Dislocation etching
LiF - Dislocation etching
LiF - Dislocation etching
LiF specimen - Chemical etching
LiF-MgF2 system - LiF-MgF2 eutectic
LiInS2 (001) oriented thin films - Chemical etching
LiInS2 thin films on (111) silicon wafer substrates - Chemical etching
LiN thin films - Chemical etching
LiNbO3 - Dislocation etching
LiNbO3 single crystal specimens - Chemical etching
LiNbO3 single crystal specimens - Metal decoration
LiTaO3 single crystal specimens - Chemical etching
LiTaO3 single crystal wafers - Metal decoration
Lichtenegger's + Bloch's etchant - Austenitic CrNi steels - Chemical etching
Lichtenegger's + Bloch's etchant, modified - Ferritic Cr steels - Chemical etching
Lichtenegger-Bloech's etchant (L-B) - Austenitic CrNi steels
Lime-silica system - Chemical etching
Lithia dispersed Nichrome (Cr-Li-Ni-O)-Ni-20Cr-1.3Li2O
Lithia-zinc oxide-silica system - Chemical etching
Lithium carbonate single crystal - Chemical etching
Lithium ferrite (Li05 Fe25 O4) - Chemical polishing and etching
Lithium ferrite (Li05 Fe25 O4) - Thermal etching
Lithium fluoride (LiF) - Chemical polishing
Lithium fluoride (LiF) - Chemical polishing
Lithium fluoride (LiF) - Chemical polishing
Lithium fluoride (LiF) - Chemical polishing
Lithium fluoride (LiF) - For etch pits etching
Lithium fluoride (LiF) - For etch pits etching
Lithium fluoride (LiF) single crystal - Chemical etching
Lithium fluoride (LiF) single crystal - Chemical etching
Lithium fluoride (LiF) single crystal - Chemical etching
Lithium glass - 30.5 mol.% LiO2, 1.5 mol.% K2O, 1 mol.% Al2O3, 1 mol.% P2O5, 5 mol.% B2O5, 61 mol.% SiO2
Lithium glass - 70% SiO2, 6/12% Li2O, 5/9% Al2O3, 5/8% K2O, 3/5% B2O5
Lithium glass - 70% SiO2, 6/12% Li2O, 5/9% Al2O3, 5/8% K2O, 3/5% B2O5, bellow 2.5% P2O5
Lithium niobate (LiNbO3) - For etching patterns on (0001) and (10T0)
Lithium nitride-Li3N - Chemical thinning
Lithium oxide-potash-zinc oxide-silicate glass - Chemical thinning
Lithium silicate glass (Li2O?2SiO2) - Chemical thinning
Lithium specimens - Chemical etching
Lithium specimens - Chemical polishing and etching
Lithium tantalate (LiTa03) - For domain structure in single crystals
Livingstone's etchant - Al-Cu alloys - Electrolytic polishing and chemical etching
Livingstone's etchant - Chemical etching
Livingstone's etchant - For Al/Cu
Livingstone's etchant, Young's etchant - Copper single crystal - Etching for etch pits
Livingstone's solution - For Ni - Electrolytic polishing
Low Mn steel - Fe-0.6/1.5C-1.1Mn
Low Mn-V steel - Fe-0.14C-1.3Mn-0.35Si-0.1V (plus Al, N)
Low Mn-V steel - Fe-0.1C-1.4Mn-0.5Si-0.1V
Low Mn-V steel - Fe-0.1C-1.5Mn-0.5Si-0.1V
Low Nb steel - Fe-0.1/0.2C-1.2/1.4Nb-0/0.2Nb
Low V alloy steel - Steel with 0.2% C and 1% V
Low V alloy steel - Steel with 0.2% C and 1% V
Low alloy steel - Chemical thinning
Low alloy steel - Chemical thinning
Low alloy steels - Chemical thinning, electrolytic polishing
Low and high alloy steels - Carbon steels, low and high alloy steels, stainless steels
Low and high alloy steels - Electrolytic polishing
Low and high alloy steels - Electrolytic polishing
Low carbon and pearlitic steels - Physical etching
Low carbon steel - Chemical etching
Low carbon steel - Physical etching
Low carbon steels - Chemical etching
Low carbon steels - Chemical etching
Low carbon steels - Color etchant- General microstructure
Low-carbon steels - Chemical polishing
Low-carbon steels - Chemical polishing
Low-carbon steels, Mg - Chemical polishing
Low-density polyethylene - Chemical etching
Lu-Ag alloys - Chemical etching
Lu-Au alloys - Chemical etching
Lu-Pd alloy - Approx. Lu3Pd4
Lu-Yb alloys - Electrolytic polishing and chemical etching
Lucas's etchant - Ni3Al based alloys with 21-29 at. per cent Al - Chemical etching
Lucas's etchant - NiChrome 80-20 - Grain structure and matrix phases
Lucite sheet and parts - Alcohol, dissolve
Lucite sheet and parts - Chemical cleaning
Lucite sheet and parts - Chemical cleaning
Lutetium - Electrolytic polishing
M" (Medium) etchant - Silicon - Chemical etching
MA 956E alloy - Fe-19Cr-4.4Al-0.5Ti-0.4Ni-0.5Y2O3
MAR-M 509 alloy - Chemical etching
MCrAlY-coatings (NiCoCrAlY coating) - Chemical etching
MERL 76 alloy - 55Ni-5.1Al-4.2Ti-12Cr-3.3Mo-0.02C-18.4Co-1.3Nb-0.7Hf (+B)
MFeM2 material - Chemical cleaning
MP35N alloy - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical etching
Magnesia (MgO) - Chemical polishing
Magnesia (MgO) - Chemical polishing, chemical etching, jet thinning
Magnesia (MgO) - Chemical thinning
Magnesia (MgO) - Chemical thinning
Magnesia (MgO) - This etch produces pits on single crystal MgO on (100) and (110) faces
Magnesia (MgO) - Well defined square pyramidal pits form on (100) faces in after few minutes
Magnesia (MgO) single crystal - Chemical etching
Magnesia (MgO) single crystal - Chemical etching
Magnesia (MgO) single crystal - Chemical etching
Magnesia (MgO) single crystal - Chemical etrching
Magnesia (MgO) single crystal - Chemical polishing
Magnesia (MgO) single crystal - Chemical polishing and etching
Magnesia (MgO)-alumina (Al2O3) mixtures - Chemical etching
Magnesia (MgO)-alumina (Al2O3) system - MgO-MgAl2O4 section
Magnesium - All types of Mg alloys in cast or heat treated state - Grain boundaries etch
Magnesium - Attack polishing
Magnesium - Cathodic etching
Magnesium - Chemical etching
Magnesium - Chemical etching
Magnesium - Chemical polishing
Magnesium - Chemical polishing
Magnesium - Chemical polishing
Magnesium - Chemical polishing
Magnesium - Chemical polishing
Magnesium - Chemical polishing
Magnesium - Chemical thinning
Magnesium - Complex Mg alloys containing Al, Zn, Cd, Bi
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic polishing
Magnesium - Electrolytic thinning
Magnesium - Electrolytic thinning by window technique
Magnesium - Electrolytic thinning by window technique
Magnesium - Mg and Mg base alloys
Magnesium - Mg and Mg-Cu alloys, Mg die-casting alloys
Magnesium - Mg-Al alloys - Grain contrast in heat treated castings - Flow lines in forgings
Magnesium - Most types of Mg and its alloys, also casting and forgings
Magnesium - Pure Mg and most Mg alloys, also in cast and forged state
Magnesium - Pure Mg, Mg-Mn, Mg-Al, Mg-Al-Zr, Mg-Th-Zr, Mg-Zn-Zr alloys
Magnesium alloys - A universal etchant
Magnesium alloys - AZ31 (Mg + 3 wt.% Al + 1 wt.% Zn)
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching
Magnesium alloys - Chemical etching - Nital
Magnesium alloys - Darkens Mg17Al12 phase and leaves Mg32(Al, Zn)40 phase unetched and white
Magnesium alloys - Electrolytic polishing
Magnesium alloys - For estimating the amount of massive phase
Magnesium alloys - Grain structure and coring in Mg-Zn-Zr alloys
Magnesium alloys - Reveals grain boundaries more readily
Magnesium alloys - Sample preparation
Magnesium alloys - Shows general structure - Nital
Magnesium and magnesium alloys - Electrolytic polishing
Magnesium bronze - Chemical etching
Magnesium fluoride MgF2 - Chemical polishing
Magnesium fluoride MgF2 - For etching grains in hot pressed magnesium fluoride
Magnesium oxide (MgO) - Chemical etching
Magnesium oxide (MgO) - Chemical etching
Magnesium oxide (MgO) - Chemical etching
Magnesium oxide (MgO) - Chemical etching
Magnesium oxide (MgO) - Chemical etching
Magnesium single crystal - Chemical etching
Magnetite (Fe3O4) - Chemical etching
Magnetite (Fe3O4) - Chemical etching
Malette's etchant - Iron and steels - Chemical etching
Manganese (II) oxide - Chemical thinning
Manganese - Electrolytic polishing
Manganese - Electrolytic polishing
Manganese - Electrolytic polishing
Manganese - Electrolytic polishing
Manganese - Mn-Fe, Mn-Ni, Mn-Cu, Mn-Co alloys
Manganese - Mn-Ge, Mn-Si, Mn-Sn-Ge, Mn-Sn-Si alloys
Manganese - Mn-Si-Ca alloys - Ferromanganese
Manganese - Pure Mn, low alloy Mn containing Ni, Co, Fe, Ge, and Cu
Manganese zinc ferrite-Low calcium oxide body - Mn0.51 x Zn0.43 x Fe2.06 x O4 + CaO
Mar M247 - Electrolytic polishing
Maraging steel - Fe-0.02C-12/16Cr-8Ni-0.15Be
Marble's etchant - Austenitic and high-temperature-resistant steels, Co superalloys
Marble's etchant - Co high-temeprature alloys - Chemical etching
Marble's etchant - Co superalloys - Chemical etching
Marble's etchant - Co-Cr-Mo-Si alloy - Tribaloy 400, Tribaloy 800
Marble's etchant - Co-Mo-Si alloy - 55Co-35Mo-10Si
Marble's etchant - Etchant of M-type ferrites - Chemical etching
Marble's etchant - Fe-Ni and Fe-Co magnetic alloys - Grain size
Marble's etchant - For iron-nickel and cobalt-base superalloys
Marble's etchant - Hard facing alloys - Chemical etching
Marble's etchant - In-Ni eutectoid (30% Ni) - Chemical ecthing
Marble's etchant - Ni, Ni-Cu and Ni-Fe alloys and superalloys - Chemical etching
Marble's etchant - Ni-Cr alloys - Chemical etching
Marble's etchant - Ni-Cr-Th alloy - Etch for TD Ni-Cr
Marble's etchant - Ni-Mo-Cr-Si alloy - 50Ni-31Mo-15Cr-3Si
Marble's etchant - Nickel - Attack polishing
Marble's etchant - Nickel superalloy 718 - Chemical etching
Marble's etchant - Nickel superalloys - Production of thin foils for electron microscopy
Marble's etchant - Stainless steels - Chemical etching
Marble's etchant - Stainless steels - General etchant
Marble's etchant - Wrought Fe-Ni-Cr heat resisting alloy - U-700 (AISI 687) - Good for contrast
Marble's etchant, modified - For Ni-Nb alloys
Marble's etchant, modified - Stainless steels - Chemical etching
Marshall's etchant - 99.999% pure iron - For etching of all grain boundaries
Marshall's etchant - Galvannealed sample - Chemical etching
Marshall's etchant - Iron and steels - Chemical etching
Marshall's solution - Fe specimens - Chemical polishing
Martensitic and ferritic stainless steels - Chemical etching
Martensitic stainless steels - Chemical etching
Martensitic stainless steels - Chemical etching
Martensitic stainless steels - Color etching
Martensitic stainless steels - Electrolytic etching
Matte's dip etchant - Cu and Cu alloy parts
Medium and high carbon steel - Chemical etching
Medium and high carbon steels - Chemical etching
Medium carbon steel - Physical etching
Medium carbon steels - Chemical etching
Medium-carbon steels - Chemical polishing
Mercury - Electrolytic polishing
Mercury alloys - Ag-Sn-Hg alloys
Mercury alloys - For most amalgamates
Mercury alloys - Hg-Sn and Hg-Sn-Cu alloys
Mercury selenide (HgSe) - Chemical polishing and etching
Mercury telluride (HgTe) - Chemical polishing and etching
Mercury telluride (HgTe) - Dislocation etch
Meruric iodidie (HgI2) - Chemical polishing and etching
Meruric iodidie (HgI2) - Chemical polishing and etching
Meruric iodidie (HgI2) - Etch pits etching
Metal samples - EBSD sample preparation
Metallic glass - Electrolytic thinning
Methanolic Aqua Regia - Austenitic stainless steels - Chemical etching
Meyer and Eichholz's No. 2 etchant - For etching nitrided layer in steel
Mg (0001) wafers - Electrolytic polishing/etching
Mg alloys - Chemical etching
Mg alloys - Electrolytic etching
Mg alloys, 1% Zn, 0.6% Zr - Chemical etching
Mg and Mg alloys - Chemical etching
Mg and Mg alloys - Electrolytic polishing
Mg and Mg alloys - For differentiation of Mg4Al3 and Mg3Al2Zn3
Mg and Mg alloys - Mg alloys with low Al content, sheet metal
Mg and Mg alloys - Mg-Al alloys, castings and forgings
Mg and Mg alloys - Mg-Al alloys, catings, Mg-Zr alloys, castings and forgings
Mg and Mg alloys - Mg-Al alloys, homogenised castings and forgings
Mg and Mg alloys - Mg-Al alloys, in the homogenised state
Mg and Mg alloys - Mg-Zr alloys, forgings
Mg and alloys - Chemical etching
Mg and alloys - Chemical etching
Mg and alloys - Chemical etching
Mg and alloys - Chemical etching
Mg and alloys - Chemical etching
Mg and alloys - Chemical etching
Mg and alloys - Electrolytic etching
Mg and high Mg alloys - Electrolytic polishing
Mg and many alloys - Electrolytic etching
Mg and wrought alloys - Chemical etching
Mg doped beta-Alumina - 90Al2O3 - 8Na2O - 2MgO
Mg pieces - Chemical cleaning
Mg sialon - Mg3 Si2.455 Al0.545 O6.245 Ni.455
Mg single crystal specimens - Physical etching
Mg single crystal wafers - Chemical etching
Mg single crystal wafers - Electrolytic polishing
Mg soldered joints AZ31, AZ91, Zm50/ZnMg3Al, Mg48Zn43Al9 - Chemical etching
Mg specimens - Chemical etching
Mg specimens - Chemical etching
Mg specimens - Chemical polishing
Mg specimens - Electrolytic polishing
Mg specimens - Electrolytic polishing
Mg specimens - Electrolytic polishing
Mg specimens - Electrolytic polishing
Mg specimens and alloy - Acid cutting
Mg, Mg-Cu and Mg die-casting alloys - Chemical etching
Mg, Mg-MgO alloys (0-5% MgO) - Chemical polishing
Mg-Al (to 6% Al), Mg-Mn and Mg-Mn-Al-Zn alloys - Chemical etching
Mg-Al alloy (Magnox 12) - Alloy with 0.85% Al
Mg-Al alloy - Alloy with 0.9% Mg
Mg-Al alloy - Alloy with 3% Mg
Mg-Al alloy - Alloys with < 10% Mg
Mg-Al alloy - Electrolytic thinning by window technique
Mg-Al alloy - Mg-gama MgAl eutectic
Mg-Al alloys - Chemical etching
Mg-Al alloys - Chemical thinning
Mg-Al alloys up to 6% Al - Chemical etching
Mg-Al and Mg-Al-Zn alloys - Chemical etching
Mg-Al, Mg-Al-Zn and Mg-Zn-Zr alloys - Chemical etching
Mg-Al-Zn alloy - Al, 3-5% Mg, 4-5% Zn (+ Cu, Fe, Si, Ni, Cr)
Mg-Al-Zn alloys - Chemical etching
Mg-Al-Zn-Mn alloy - Mg-9Al-1Zn-0.3Mn
Mg-Ca alloy - Mg rich alloys
Mg-Ce alloy - Electrolytic etching
Mg-Cu alloy - Mg-Mg2Cu section
Mg-H system - Electrolytic polishing
Mg-Li alloy - Alloy with 10.5 at.% Li
Mg-Li-Al alloy - Mg rich alloys
Mg-Mn ferrite (Fe-Mg-Mn-O) - Chemical etching
Mg-Mn ferrite (Fe-Mg-Mn-O) - Rapid attack on grain boundaries
Mg-Mn wrought alloys - Chemical etching
Mg-Nd system - Alloys with low Nd (0.5 at.%)
Mg-Nd-Y-Zn-Zr alloy - Mg-1.5Y-2/4Nd-2/4Zn-0.6Zr
Mg-Ni alloy - Mg-Mg2Ni
Mg-Ni alloy - Mg-Mg2Ni eutectic
Mg-Pb alloy - Dendritic structure of cast alloys for SEM examination
Mg-Sb alloy - Mg-Mg3Sb2 section
Mg-Si alloy - Mg-Mg2Si section
Mg-Si alloys - Chemical etching
Mg-Si alloys - Chemical etching
Mg-Sn alloy - Mg-Mg2Sn section
Mg-Th alloys - Electrolytic polishing
Mg-Th-Zr alloy - Alloy with 3.9% Th and 0.4% Zr
Mg-U alloys - Chemical etching
Mg-Y alloy - Alloy with 10.8 wt.% Y
Mg-Y alloy - Alloy with 8.7% Y
Mg-Y-Zn-Zr alloy - Mg-1.5Y-2/4Zn-0.6Zr
Mg-Y-Zr alloy - Mg-1.5Y-0.6Zr
Mg-Zn alloy - Cathodic etching
Mg-Zn alloy - Electrolytic polishing
Mg-Zn alloy - Electrolytic thinning by window technique
Mg-Zn alloy - Initial chemical thinning
Mg-Zn alloys - Chemical etching
Mg-Zn alloys - Chemical etching
Mg-Zn alloys - Chemical etching
Mg-Zn alloys - Electrolytic polishing
Mg-Zn alloys - Electrolytic polishing and chemical thinning
Mg-Zn-Zr alloy - Mg-6Zn-0.5Zr
Mg-Zr alloy - Alloys with 0.5 wt.% Zr
Mg-Zr alloy - Alloys with low Zr content
Mg-Zr alloy - Electrolytic polishing and electrolytic thinning
Mg-Zr alloy - Electrolytic thinning
Mg-Zr alloy - Initial chemical thinning
Mg-Zr system - ZrO2-9/14 mol.% MgO
Mg-Zr-Mn alloy - Mg-0.5Zr-0.1Mn
Mg2G3 (111) wafers - Chemical polishing
Mg2Ge (111) cleaved wafers - Chemical etching
Mg2Ge (111) cleaved wafers - Cleave, cleaning
Mg2Ge (111) wafers - Chemical cleaning
Mg2Ge (111) wafers - Chemical cleaning
Mg2Ge (111) wafers - Chemical polishing
Mg2Si (111) cleaved wafers - Chemical etching
Mg2Si single crystals - Chemical etching
Mg2Sn (100) cleaved wafers
Mg2Sn single crystal specimens
Mg3N4 thin films deposited on Mg specimen blanks - Chemical etching
MgAl2O4 (spinel) (100) and (111) wafers - Chemical polishing
MgAl2O4 (spinel) (111) wafers - Chemical cleaning
MgAl2O4 (spinel) natural crystals - Molten flux decomposition
MgAl2O4 (spinel) natural crystals - Molten flux etching
MgF2 (100) specimens - Chemical etching
MgF2 (100) wafers - Chemical polishing/etching
MgF2 - Dislocation etching
MgO (100) cleaved wafers - Chemical etching
MgO (100) cleaved wafers - Chemical etching
MgO (100) specimens cleaved as rectangles - Chemical etching
MgO (100) substrates - Acid, float-off
MgO (100) wafers - Chemical cleaning
MgO (100) wafers - Chemical cleaning
MgO (100) wafers - Chemical etching
MgO (100) wafers - Chemical polishing
MgO (100) wafers - Chemical thinning
MgO (100) wafers - Dislocation etching
MgO (100) wafers - Metal decoration
MgO (111) cleaved substrates - Ionized gas, cleaning
MgO - Chemical etching
MgO - Dislocation etching
MgO - Dislocation etching
MgO - Dislocation etching
MgO - Dislocation etching
MgO - Dislocation etching
MgO - Dislocation etching
MgO and UO2 - Chemical etching
MgO sample prepration
MgO single crystal specimens - Electrolytic damage
MgO specimens - Chemical etching
MgO x Al2O3 (111) blanks - Gas etching
MgO, ThO2, Al3NiO4, and Y2O3 - ZrO2 - Chemical etching
MgO, UO2 (!!!) - Chemical etching
MgS single crystals - Chemical etching
MgSe single crystal - Chemical polishing
MgTe single crystals - Chemical etching
Mica and natural rock salt - Gas cleaning
Microalloyed steels - Electrolytic polishing
Microalloyed steels - Electrolytic polishing
Microalloyed steels - Electrolytic polishing
Microalloyed steels - Electrolytic polishing
Microalloyed steels - Electrolytic polishing
Microalloyed steels - Electrolytic polishing
Microstructure of Zr alloys - Chemical etching
Microstructures of Cr and CrNi steels - Electrolytic etching
Mild steel (0.2% C) - Electrolytic thinning
Mild steel - Chemical polishing
Mild steel - Electrolytic thinning by window technique
Mild steel - Electrolytic thinning in PTFE holder
Mild steel - Fe-0.15% C
Miller and Day's etchant - Ffor low-carbon steels - Chemical etching
Minerals - Attack polishing
Mixed sintered carbides - Electrolytic etching
Mixtures of acrylonitrile-butadiene-styrene - Chemical etching
Mn dual phase steel - 0.07C-1.26Mn-0.30Si-0.08V-0.08Mo-0.07Cr
Mn dual phase steel - 0.11C-1.47Mn-0.34Si-0.05Nb
Mn steel - Fe-0.16C-13Mn-0.24Si-0.22Cu-0.48Cr-0.03/0.13Nb
Mn steel - Fe-0.6/2.1C-0/0.5Mn
Mn steels-14% Mn steel (Hadfield steel)
Mn thin film deposits on ruthenium substrates - Chemical cleaning
Mn thin films - Chemical polishing/etching
Mn(x)Zn(1-x)Y(z)O12 single crystal specimens - Abrasive polishing
Mn, Mn-C, Mn-Cr steels - Color etching
Mn, Mn-Cu alloys - Electrolytic polishing
Mn-Cr dual phase steel - Fe-0.07C-1.4Mn-0.6Si-0.2Ce
Mn-Cr steel - Fe-20Mn-4Cr-0.5C
Mn-Cr-V-W steel - 0.9C-1.1Mn-0.5Cr-0.5W-0.2V
Mn-Cu alloy - Manganese and Mn-Cu alloys
Mn-Cu alloys - Electrolytic etching
Mn-Fe, Mn-Ni, Mn-Cu and Mn-Co alloys - Chemical etching
Mn-Ge system - Chemical etching
Mn-Ge, Mn-Si, Mn-Sn-Ge and Mn-Sn-Si alloys - Chemical etching
Mn-Sb alloy - Mn2Sb
Mn-Sb system - MnSb-Sb eutectic
Mn-Sb-V alloy - Mn1.8V0.2Sb
Mn-Se system (MnSe) - Chemical etching
Mn-Se-S system - MnSe-MnS solid solution - To remove disurbed layers
Mn-Se-Te system - MnSe-MnTe section
Mn-Si alloy - Alloys with 2-24 at.% Si
Mn-Sn system - Mn rich alloys
Mn-Sn system - Quoted for non-stoichometric Mn-Sn alloys
Mn-Te system (MnTe) - Chemical etching
Mn-Ti alloys (0-30% at.% Ti) - Chemical etching
Mn-Ti alloys (up to 30 Ti) - Chemical polishing
Mn-Ti-Co system - Chemical etching
Mn-Ti-Fe system - Chemical etching
Mn-Ti-Fe system - FeTi-0.25-1% Mn section
Mn-V alloys - Chemical etching
Mn-Zn ferrite (Fe-Mn-O-Zn) - Chemical etching
Mn-Zn ferrite (Fe-Mn-O-Zn)-Low Nb oxide body-Mn0.51 x Zn0.43 x Fe2.06 x O4 + Nb2O5
Mn-Zn ferrite (Fe-Mn-O-Zn)-Low Nd oxide body-Mn0.51 x Zn0.43 x Fe2.06 x O4 + Nd2O3
Mn-Zn ferrite (Fe-Mn-O-Zn)-Mn0.564 x Zn0.374 x Fe2.06 x 04
Mn-Zn ferrite (Fe-Mn-O-Zn)-Mn8.51 x Zn0.43 x Fe2.06 x O4
Mn-Zn ferrite - Low Pb oxide body (Fe-Mn-O-Pb-Zn)-Mn0.5 x Zn0.43 x Fe2.03 x O4 + PbO
Mn-Zn ferrite - Low Sb oxide body (Fe-Mn-O-Sb-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + Sb2O3
Mn-Zn ferrite - Low Si oxide body (Fe-Mn-O-Si-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + SiO2
Mn-Zn ferrite - Low Sn oxide body (Fe-Mn-O-Sn-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + SnO2
Mn-Zn ferrite - Low Sr oxide body (Fe-Mn-O-Sr-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + SrO
Mn-Zn ferrite - Low Ti oxide body (Fe-Mn-O-Ti-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + TiO2
Mn-Zn ferrite - Low V oxide body (Fe-Mn-O-V-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + V2O5
Mn-Zn ferrite - Low Y oxide body (Fe-Mn-O-Y-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + Y2O3
Mn-Zn ferrite - Low Zr oxide body (Fe-Mn-O-Zr-Zn)-Mn0.51 x Zn0.43 x Fe2.03 x O4 + ZrO2
Mn-Zn ferrite - Low copper oxide body-Mn0.51 Zn0.43 Fe2.06O4 + CuO
Mn-Zn ferrite-low Cd oxide body - Mn0.51 x Zn0.43 x Fe2.06 x O4 + CdO
Mn-Zn ferrite-low Ge oxide body - Mn0.5 x Zn0.43 xFe2.06 x O4 + GeO2
Mn-Zn ferrite-low alumina body - Mn0.51 Zn0.43 Fe2.00 O4 - Al2O3
MnFe2 single crystal sphere - Abrasive, forming
MnO single crystals doped with iron as ferrites - Chemical etching
MnO2 natural crystal specimens - Chemical etching
MnO2 single crystal specimens - Physical etching
MnTe2 single crystal specimens - Chemical polishing
Mo (100) specimens - Chemical polishing
Mo (111) wafers - Chemical cleaning
Mo (111) wafers - Chemical cleaning
Mo (111) wafers - Electrolytic polishing/thinning
Mo alloys - Chemical etching
Mo alloys - Chemical etching
Mo alloys - Electrolytic etching
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo alloys - Electrolytic polishing
Mo and Mo-Ni alloys - EBSD sample preparation
Mo and Mo-Ti alloys - Chemical etching
Mo and alloys - Chemical etching
Mo and alloys - Chemical etching
Mo and alloys - Electrolytic etching
Mo and alloys - Electrolytic etching
Mo and alloys - Electrolytic etching
Mo and alloys - Electrolytic etching
Mo and its alloys, Ta and its alloys, W and W-base alloys - Electrolytic etching
Mo and some alloys - Chemical etching
Mo and some alloys - Chemical etching
Mo crystalline specimens - Chemical etching - /thinning
Mo foil - Chemical cleaning/polishing
Mo poly sheet - Chemical cleaning
Mo pressed powder discs - Chemical etching
Mo sheet - Electrolytic polishing
Mo single crystal specimens - Electrolytic thinning
Mo specimens - Chemical cleaning
Mo specimens - Chemical cleaning
Mo specimens - Chemical cleaning
Mo specimens - Chemical cleaning
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching
Mo specimens - Chemical etching - polishing
Mo specimens - Chemical polishing
Mo specimens - Chemical polishing
Mo specimens - Chemical polishing
Mo specimens - Electrolytic etching
Mo specimens - Electrolytic etching
Mo specimens - Electrolytic polishing
Mo specimens subjected to Kr+ ion bombardment - Chemical etching
Mo specimens used for electroplating - Chemical polishing
Mo thin films - Chemical etching
Mo thin films and crystalline specimens - Chemical etching
Mo thin films and crystalline specimens - Chemical etching
Mo thin films and crystalline specimens - Metal alloying
Mo, Nb - Chemical-Mechanical polishing
Mo, Nb, Ta, W - Attack polishing
Mo, W - Chemical-Mechanical polishing
Mo, W - Electrolytic etching
Mo-Al and Mo-Co alloys - Chemical etching
Mo-C alloys - Attack polishing
Mo-Co alloy - Pre-etch for alpha Co alloys in 50% nitric acid
Mo-Fe alloys - Chemical etching
Mo-Ga alloy - Chemical etching
Mo-Hf alloy (1 at.% Hf) - Electrolytic thinning
Mo-Hf alloys - Electrolytic etching
Mo-Mn-Co system - Chemical etching, electrolytic etching
Mo-Nb alloy single crystal - Alloy with 5 at.% Nb
Mo-Ni alloy - Alloy with 33 at.% Mo
Mo-Ni alloy - Electrolytic thinning
Mo-Ni alloys - Chemical etching
Mo-Ni-C system - Chemical etching
Mo-Os alloys - Chemical and electrolytic etching
Mo-Pt alloy - Alloys with up to 55 at.% Pt
Mo-Re alloy (34% Re) - Alloy with 34 at.% Re
Mo-Re alloy (35% Re) - Electrolytic polishing
Mo-Re alloy - Alloy with 5 at.% Re
Mo-Re alloy - Electrolytic thinning
Mo-Re alloys - Chemical etching
Mo-Re alloys - Electrolytic polishing and etching
Mo-Re-C alloy - Mo-3.5Re-0.2C
Mo-Re-Hf-C system - Mo-1.6/2.3Re-0.2/1.0Hf-0.1/1.9C
Mo-Sc alloys - Chemical etching
Mo-Y alloys - Chemical etching
Mo-Zr alloy - Electrolytic thinning
Mo2B3 specimens - Chemical etching
Mo2B3 specimens - Chemical etching
Mo2B5 specimens - Chemical etching
Mo2C specimens - Chemical etching
Mo3Ge specimens - Chemical etching
Mo3Ge specimens and Mo3Ge2 - Chemical etching
MoB surface penetration film - Chemical etching
MoB2 specimen - Chemical etching
MoN and Mo2N thin films grown on (100) silicon wafers - Chemical etching
MoO2 as amorphous platelets on steel - Chemical etching
MoO3 thin film - Chemical etching
MoS2 as powdered lubricant - Chemical cleaning
MoS2 natural single crystal specimens - Ester, removal
MoS2 single crystal platelets - Tape, cleaning
MoS2 single crystal specimens - Chemical polishing
MoSe2 single crystal specimens - Chemical polishing
MoSeS2 single crystal platelets - Tape, cleaning
MoSi2 the films deposited on silicon substrates - Ionized gas etching
MoSi2 thin films - Gas forming
MoSi2 thin films deposited on silicon substrates - Ionized gas etching
MoTe2 single crystal specimens - Chemical polishing
Modification of Lacombe and Beaujard's etchant - Aluminium (HP) - Dislocation etching
Moly's etchant - Mo discs - Chemical cleaning
Molybdenium - Electromechanical polishing
Molybdenium - Electromechanical polishing
Molybdenium - Nb, Ta, Mo and their alloys
Molybdenum - Attack polishing
Molybdenum - Cathodic etching
Molybdenum - Chemical etching
Molybdenum - Chemical etching
Molybdenum - Chemical etching
Molybdenum - Chemical etching
Molybdenum - Chemical polishing
Molybdenum - Cr, Mo, Mo-Cr alloys (up to 80% Cr)
Molybdenum - Dislocation etching
Molybdenum - Dislocation etching
Molybdenum - Dislocation etching
Molybdenum - Electrolytic etching
Molybdenum - Electrolytic and chemical polishing
Molybdenum - Electrolytic etching
Molybdenum - Electrolytic etching
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing
Molybdenum - Electrolytic polishing - Mo thin foil preparation
Molybdenum - Electrolytic polishing and etching
Molybdenum - Electrolytic polishing and thinning
Molybdenum - Electrolytic polishing for sheets
Molybdenum - Electrolytic polishing, thinning and chemical etching
Molybdenum - Electrolytic thinning
Molybdenum - Electrolytic thinning
Molybdenum - Electrolytic thinning
Molybdenum - Electrolytic thinning
Molybdenum - Electrolytic thinning
Molybdenum - Electrolytic thinning by window technique
Molybdenum - Jet thinning
Molybdenum - Mo (grain contrast)
Molybdenum - Mo and Mo alloys
Molybdenum - Mo and Mo alloys
Molybdenum - Mo and Mo base alloys
Molybdenum - Mo and Mo-Ni alloys
Molybdenum - Mo, Ta, Nb, Mo-Ti alloys. Ta-Nb alloys. Pure V and V base alloys
Molybdenum - Mo, W and their alloys
Molybdenum - Mo, W and their alloys
Molybdenum - Mo, W and their alloys
Molybdenum - Particulary good for sintered Mo-32 to 80 F
Molybdenum - Pure Mo
Molybdenum - Pure Nb, Mo
Molybdenum - Ta and Ta base alloys, Nb and Nb base alloys
Molybdenum - W and W base alloys, Mo and Mo base alloys
Molybdenum boride (MoB2) - Chemical etching
Molybdenum disilicide (MoSi2) - Chemical etching
Molybdenum selenide (MoSe2) - MoSe2 single crystal
Molybdenum silicide (MoSi2 and Mo5Si3) - Electrolytic etching
Molybdenum single crystal - Electrolytic polishing
Molybdenum sulphide (MoS2) - Produces hexagonal etch pits on (0001) face
Molybdenum, Re alloys, Re-Mo alloys - Electrolytic polishing
Molybdenum, Tungsten - Attack polishing
Molybdenum, etch figures - Chemical etching
Molybdenum, sintered and cast - Electrolytic polishing
Molybdenum, sintered and cast - Electrolytic polishing
Molybdenum, tantalum, niobium - Electrolytic polishing
Molybenum - Attack polishing
Monel - Electrolytic polishing
Monel - Electrolytic polishing
Monel 400 - For the grain boundaries
Monel, Ni-Al and Ni-Fe alloys - Chemical etching
Moran's etchant - NaCl (100) wafers, NaCl single crystal whiskers - Chemical etching
Morris's electrolytic polishing solution - Dislocation etching
Morris's electrolytic polishing solution - Fe-3% Si alloy - Dislocation etching
Mullite (Al2O3 x SiO2), BeO, MgO, Ca(2)Zr(1-1x)O(y) - Chemical etching
Mullite (Al4OSi2 x Al2O12) - Chemical etching
Murakami's etchant - W and W alloys - Chemical etching
Murakami's etchant - Alumina (Al2O3) - Aluminia with additives
Murakami's etchant - Cast irons - 30% chromium irons
Murakami's etchant - Cast irons - High phosphorus irons
Murakami's etchant - Co-Cr-Mo-Ni-Fe-Si-C-Mn-Al-Ti alloy
Murakami's etchant - Co-Cr-Ni alloys - For identification of sigma phase
Murakami's etchant - Co-Sn0Sb alloys - For carbides
Murakami's etchant - Copper-Tungsten (Cu-W) - Electric contact material
Murakami's etchant - Cr and Cr alloys - Chemical etching
Murakami's etchant - Fe-Ni-Cr heat resistant casting alloys - Etchant for staining or film forming
Murakami's etchant - Gold-Plated Nickel-Iron (Au-Ni-Fe) - Electric contact material
Murakami's etchant - Iron - Selective carbides
Murakami's etchant - Iron and steels - Chemical etching
Murakami's etchant - Martensitic chromium steels - Chemical etching
Murakami's etchant - Mo and alloys - Chemical etching
Murakami's etchant - Mo specimens - Chemical etching
Murakami's etchant - Mo-C alloys - Chemical etching
Murakami's etchant - Mo-C alloys - Chemical etching
Murakami's etchant - Molybdenum - Chemical etching
Murakami's etchant - Molybdenum - Electric contact material
Murakami's etchant - Molybdenum-Silver (Mo-Ag) - Electric contact material
Murakami's etchant - Ni-Cu alloys and superalloys - Chemical etching
Murakami's etchant - Rhenium - Chemical etching
Murakami's etchant - Rhenium - Chemical etching
Murakami's etchant - Sb telluride - Chemical etching
Murakami's etchant - SiC alloy with 1% B4C - Chemical etching
Murakami's etchant - Silicon carbide (SiC) - For SiSiC
Murakami's etchant - Silver - Molybdenum (Ag-Mo) - Electric contact material
Murakami's etchant - Silver-Tungsten (Ag-W) - Electric contact material
Murakami's etchant - Silver-Tungsten carbide (Ag-WC) - Electric contact material
Murakami's etchant - Sn-Cd-Sb alloys - Chemical etching
Murakami's etchant - Stainless steel castings - General structure
Murakami's etchant - Stainless steel castings - General structure
Murakami's etchant - Stainless steels - Chemical etching
Murakami's etchant - Stainless steels - Color etchant
Murakami's etchant - Steels and other alloys
Murakami's etchant - Ta-Mo alloys - Chemical etching
Murakami's etchant - TiC coated steel - Chemical etching
Murakami's etchant - Tungsten - Electric contact material
Murakami's etchant - Tungsten - Mo, W and their alloys
Murakami's etchant - Tungsten-Copper (W-Cu) - Electric contact material
Murakami's etchant - Tungsten-Nickel (W-Ni) - Electric contact material
Murakami's etchant - Tungsten-rhenium-thoria system (O-Re-Th-W)-W - 3% Re-2% ThO2
Murakami's etchant - U-Zr alloys - Chemical etching
Murakami's etchant - U-Zr alloys, U-Fe-Co alloys, U-Al2-U3Si3 alloys - Chemical etching
Murakami's etchant - V and V-O alloys - Chemical etching
Murakami's etchant - Vanadium specimens - Chemical etching
Murakami's etchant - Vanadium-nitrogen system (V-N) - Electrolytic and chemical polishing
Murakami's etchant - W-Hf alloys (< 3% Hf) - Chemical etching
Murakami's etchant - W-Hf-N alloys alloy - < 3% Hf, nitrided
Murakami's etchant - W-Hf-Re alloys - Chemical etching
Murakami's etchant - W-Hf-Re-N alloys alloy - < 2% Hf, < 25% Re, nitrided
Murakami's etchant - W-Mo-Hf-Re alloy - < 20% Mo, < 2% Hf, < 30% Re
Murakami's etchant - W-Mo-Hf-Re-N alloy - < 20% Mo, < 2% Hf, < 30% Re, nitrided
Murakami's etchant - WC specimens - Chemical cleaning
Murakami's etchant - WC-Co, Eta phase appears multicolored; Co is white, WC-TiC-TaC-Co, WC-NbC-Co
Murakami's etchant - Wrought Fe-Ni-Cr heat resisting alloys - Inconel 706 and alloy 718, carbide particles
Murakami's etchant - Wrought stainless steels - General structure, sigma phase
Murakami's etchant, boiling - Aluminium nitride (AlN) - Chemical etching
Murakami's etchant, boiling - SiC-AlN specimens - SiC-10/80% AlN
Murakami's etchant, modified (Klemm) - Al-Si aloys - Chemical etching
Murakami's etchant, modified - AlN-Al2O3 - Chemical etching
Murakami's etchant, modified - Aluminium nitride (AlN) - AlN with Al2O3
Murakami's etchant, modified - Iron and steels - Chemical etching
Murakami's etchant, modified - Molybdenum - Mo, W and their alloys
Murakami's etchant, modified - Silicon carbide (SiC) - For RSiC - Reveals alpha/beta grain boundaries
Murakami's etchant, modified - Silicon carbide (SiC) - For alpha-SiC - Reveals alpha/alpha and alpha/beta grain boundaries
Murakami's etchant, modified - Stainless steels - Chemical etching
Murakami's etchant, modified - Stainless steels - Chemical etching
Murakami's etchant, modified - Stainless steels - Chemical etching
Murakami's etchant, modified - Stainless steels - Chemical etching
Murakami's etchant, modified - Ti-V-Mo alloys - Chemical etching
Murakami's etchant, modified - Tungsten - Mo, W and their alloys
Murakami's etchant, modified - W and lean alloys - Chemical etching
Murakmi's etchant - Austenitic and ferritic-Austenitic stainless steels - Chemical etching
Murkami's etchant - Steel specimens - Carbide etching
Murkami's etchant - TiC specimens - Chemical cleaning
Muscovite mica (0H)2KAl2(AlSi3O10) - Acid, float-off
Muscovite mica (0H)2KAl2(AlSi3O10) - Chemical cleaning
N-155 alloy - Chemical etching
N2, grown as a single crystal - Pressure, defect
NASA 11B7 alloy - 56.6Ni-3.4Al-0.7Ti-8.9Cr-2.0Mo-0.1C-9.1Co-7.5W-0.5V-10.2Ta-1.1Hf (+ 0.02 B) by weight
Na beta Al2O3 - Chemical etching
Na beta Al2O3 - Physical etching
NaBr single crystal specimens - Alcohol, cutting
NaBr specimens - Chemical etching
NaCl (100) blanks - Gas cleaning
NaCl (100) cleaved wafers - Chemical etching
NaCl (100) cleaved wafers - Chemical polishing
NaCl (100) cleaved wafers - Chemical polishing
NaCl (100) cleaved wafers - Chemical polishing
NaCl (100) cleaved wafers - Dislocation etching
NaCl (100) cleaved wafers - Dislocation etching
NaCl (100) cleaved wafers - Dislocation etching
NaCl (100) cleaved wafers - Thermal etching
NaCl (100) cleaved wafers - Thermal, float-off
NaCl (100) crystals
NaCl (100) wafers
NaCl (100) wafers - Chemical cleaning
NaCl (100) wafers - Chemical cleaning
NaCl (100) wafers - Chemical etching
NaCl (100) wafers - Chemical etching
NaCl (100) wafers - Chemical etching
NaCl (100) wafers - Chemical etching
NaCl (100) wafers - Chemical polishing
NaCl (100) wafers - Chemical polishing
NaCl (100) wafers - Dislocation etching
NaCl (100) wafers - Acid, float-off
NaCl (100) wafers - Gas cleaning
NaCl (100) wafers - Metal decoration
NaCl (100) wafers and single crystals - Chemical polishing
NaCl - Dislocation etching
NaCl - Dislocation etching
NaCl - Dislocation etching
NaCl - Dislocation etching
NaCl dendritic sample
NaCl single crystal specimens - Chemical etching
NaCl, NaF - Dislocation etching
NaKC4H4O6 x 4H2O (0001) wafers - Chemical cleaning
NaKC4H4O6 x 4H2O (0001) wafers - Chemical etching
NaNO3 single crystals - Base, removal
Nb (100) oriented single crystal cylinders - Thermal etching
Nb (100) oriented single crystal rods - Chemical polishing
Nb and 1% Zr alloys - Chemical etching
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys - Electrolytic polishing
Nb and Nb alloys, Ta and Ta-O alloys (industrial alloys), etch figures - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Chemical etching
Nb and alloys - Electrolytic etching
Nb oxide, NbO (blue), NbO2 (blue green), Nb2O5 (red brown) - Electrolytic etching
Nb oxides - Chemical etching
Nb polycrystalline samples - Chemical polishing
Nb specimens - Chemical cleaning
Nb specimens - Chemical cleaning
Nb specimens - Chemical etching
Nb specimens - Chemical etching
Nb specimens - Chemical etching
Nb specimens - Chemical polishing
Nb specimens - Chemical polishing
Nb specimens - Electrolytic oxidation
Nb specimens - Electrolytic polishing
Nb specimens - Hydrocarbon cleaning
Nb specimens used for electroplating - Electrolytic polishing
Nb thin films evaporated on glass - Gas oxidation
Nb, Mo, W - Electrolytic lapping
Nb, NbGa, Nb3Si-Anodizing
Nb, Ta - Chemical polishing
Nb, V, Ta - Chemical polishing
Nb, V, Ta - Chemical polishing
Nb, V, Ta - Chemical polishing
Nb, V, Ta - Chemical polishing
Nb-Al alloy - Nb3Al
Nb-Al alloy - Nb3Al
Nb-Al alloys - Chemical etching
Nb-Al-Ga system - Nb3Al-Nb3Ga section
Nb-Al-Ga-Ge system - Nb3Al.Nb3Ga-Nb3Ge section
Nb-Al-Ge system - Nb3Al-Nb3Ge section
Nb-Al-Si system - Chemical etching
Nb-C alloys - Chemical ecthing
Nb-Co system - Chemical etching
Nb-Co-Si alloys - Chemical etching
Nb-Cr alloys - Chemical etching
Nb-Ga system - Electro etching
Nb-Ga system - Nb3Ga
Nb-Ga-Ge system - Nb3Ga-Nb3Ge section
Nb-Gd alloys - Chemical etching
Nb-Ge alloy (Nb3Ge) - Chemical etching
Nb-Ge alloy (Nb3Ge) - Chemical etching
Nb-Ge alloy - Anodic etching
Nb-H allooys - Chemical polishing and etching
Nb-Hf alloys - Attack polishing
Nb-Hf alloys - Attack polishing
Nb-Hf-C alloy - Nb rich alloys
Nb-Ir alloys - Chemical and electrolytic etching
Nb-Mo alloy - Alloys with 1-8 at.% Mo
Nb-Mo alloy - Single crystal alloys
Nb-Mo-C alloys - Attack polishing
Nb-Mo-C alloys - Chemical etching
Nb-N alloys - Chemical etching
Nb-N system - Chemical etching
Nb-N system - Chemical etching
Nb-N system - Electrolytic etching
Nb-N system - Electrolytic polishing
Nb-Ni alloy (Ni60Nb40) - Electrolytic thinning
Nb-Ni alloy - Ni-Ni3Nb eutectic
Nb-O alloys - Chemical etching
Nb-Re alloys - Chemical etching
Nb-Rh alloys (<25 at.% Rh) alloys - Chemical etching
Nb-Rh alloys - Chemical and electrolytic etching
Nb-Rh alloys single crystal - Chemical polishing
Nb-Ru alloys - Electrolytic etching
Nb-Sc alloys - Chemical etching
Nb-Si alloy - Anodising
Nb-Sn alloy (Nb3Sn) - Chemical etching
Nb-Sn alloy (Nb3Sn) - Chemical etching
Nb-Sn alloy (Nb3Sn) - Electrolytic thinning and polishing
Nb-Sn alloy - Anodic etching, chemical etching
Nb-Sn alloy - Chemical etching
Nb-Sn alloy - Chemical etching
Nb-Sn alloys (single crystal Nb3Sn) - Chemical etching
Nb-Sn alloys - Chemical ecthing
Nb-Sn alloys - Chemical etching
Nb-Sn alloys - Chemical etching
Nb-Sn alloys - Electrolytic etching
Nb-Ta alloys - Chemical polishing
Nb-Tb and Nb noble metal alloys - Chemical etching
Nb-Ti alloy (20 at.% Nb) - Chemical polishing
Nb-Ti alloy (54.3 at.% Ti) - Chemical etching
Nb-Ti alloy - Electrolytic thinning
Nb-Ti alloys (18-40 at.% Nb) - Chemical thinning
Nb-Ti alloys - Chemical etching
Nb-V alloys - Chemical etching
Nb-V and Nb alloys - Chemical etching
Nb-W-Mo-Hf alloy - SU16 alloy 11% W, 3% Mo, 3% Hf, 0.08% C
Nb-W-Zr alloy (NB7-19% W, 2% Zr) - Chemical etching
Nb-Zn alloys - Chemical etching
Nb-Zr alloy (1% Zr) - Chemical etching
Nb-Zr alloy (15% Nb) - Electrolytic thinning
Nb-Zr alloy (16-40% Zr) - Electrolytic polishing
Nb-Zr alloy (2.5% Nb) - Chemical thinning for electron microscopy
Nb-Zr alloy (2.7% Nb) - Chemical etching
Nb-Zr alloy (25 at.% Zr) - Electrolytic polishing
Nb-Zr alloy (25% Zr) - Chemical etching
Nb-Zr alloy (up to 20% Nb) - Chemical etching
Nb-Zr alloy - Micro jet machinning
Nb-Zr alloy - Sample prepation
Nb-Zr alloys (Omega phase) - Chemical polishing
Nb-Zr alloys - Chemical etching
Nb-Zr alloys - Chemical etching
Nb-Zr alloys - Chemical etching
Nb-Zr alloys - Chemical etching
Nb-Zr alloys - Chemical polishing and etching
Nb-Zr alloys - Electrolytic etching
Nb-Zr alloys - Electrolytic etching
Nb-Zr and Nb-Zr-Re alloys - Chemical etching
Nb-Zr-O system (Nb rich) - Electrolytic etching
Nb-low carbon alloys - Chemical polishing
Nb/Nb2O3, E-Ni-Fe - Chemical-Mechanical polishing
Nb2O5 - Chemical etching
Nb2O5 as the natural mineral iron niobate FeNb2O6 - Chemical etching
Nb3B3 specimens - Chemical etching
Nb3B3 specimens - Chemical etching
Nb3B3 specimens - Chemical etching
Nb3Ge single crystal compound - Physical etching
Nb3Ge thin films - Chemical etching
Nb3Ge thin films on (100) Ge substrates - Chemical etching
Nb3Se (100) hexagonal platelets - Chemical cleaning
Nb3Si - Electrolytic etching
Nb3Sn - Anodizing
Nb3Sn - Chemical etching
Nb3Sn amorphous thin films - Heat, removal
Nb3Sn as single crystals - Chemical polishing
Nb3Te4 single crystal - Chemical cleaning
NbAl(y) as alloy specimens - Chemnical etching
NbC and NbC2 - Electrolytic etching
NbC specimens - Chemical etching
NbC specimens - Chemical etching
NbC thin films - Chemical etching
NbC/NbC2 - Electrolytic etching
NbH as powder - Chemical etching
NbH deposited on silicon wafers - Chemical etching
NbN (100) thin films deposited on NaCl - Ionized gas cleaning
NbN (yellow), Nb2N (pink) - Electrolytic etching
Nd specimens - Arc, forming
Nd-Ag alloys - Chemical etching
Nd-Al alloy
Nd-Co alloys - Chemical etching
Nd-Co alloys - Chemical etching
Nd-Co-Cu alloy - (Co,Cu)5Nd
Nd-Fe-B alloys, phase identification - Chemical etching
Nd-H system - Chemical etching
Nd2O3, U3O8 - Chemical etching
NdFeB alloy - Rare-Earth magnetic alloy
Ne grown as a single crystal - Pressure
Ne-Au alloys - Chemical etching
Ne-Bi system - Chemical etching
Neodymium doped barium titanate - Thermal and chemical etching
Neodymium oxide (Nd2O3) - Chemical etching
Neodymium oxide-Zirconia system - ZrO2-Nd2O3 eutectic
Neodymium specimens - Electrolytic polishing
Neodymium specimens - Electrolytic polishing
Neodymium-palladium alloys (Nd-Pd)-Approx. Nd3Pd4
Neodymium-zinc alloys (Nd-Zn) - Chemical etching
Neptunium - Electrolytic polishing
Neptunium - Electrolytic polishing
New etching procedure for Ni alloy 690
Ni (100) wafers - Chemical etching
Ni (100) wafers - Ionized gas cleaning
Ni alloys - Chemical etching
Ni alloys, some alloy steels - Attack polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni alloys - Electrolytic polishing
Ni and Ni-Cu alloys - Electrolytic etching
Ni and alloys - Chemical etching
Ni crystalline electrode rod - Alcohol cleaning
Ni evaporated as an AuNi coating on resistors - Chemical etching
Ni evaporated thin films - Chemical etching
Ni passive superalloys - Chemical etching
Ni polycrystalline specimens - Electrolytic etching
Ni silicide - Chemical etching
Ni single crystal sphere - Thermal forming
Ni single crystals - Electrolytic thinning
Ni specimens - Chemical cleaning
Ni specimens - Chemical cleaning
Ni specimens - Chemical etching
Ni specimens - Chemical etching
Ni specimens - Chemical etching
Ni specimens - Chemical polishing
Ni specimens - Chemical polishing
Ni specimens - Electrolytic etching
Ni specimens - Electrolytic polishing
Ni specimens - Electrolytic polishing
Ni specimens - Electrolytic polishing
Ni specimens - Electrolytic polishing
Ni specimens - Electrolytic polishing
Ni steel - Fe-0.4/1.3C-8/25Ni
Ni superalloys - Chemical etching
Ni superalloys - Chemical etching
Ni superalloys - Chemical etching
Ni superalloys - Chemical etching
Ni superalloys - Chemical etching
Ni superalloys - Chemical etching
Ni superalloys - Electrolytic etching
Ni superalloys - Electrolytic etching
Ni superalloys - Electrolytic etching
Ni superalloys - Electrolytic etching
Ni superalloys - Electrolytic etching
Ni superalloys, Hastelloy - Chemical etching
Ni thin film evaporation on glass - Chemical etching
Ni thin films - Chemical etching
Ni, 20% Cr and 2% ThO2 alloy - Electrolytic etching
Ni, Ni-Cr and Ni-Fe alloys - Electrolytic etching
Ni, Ni-Cu, Ni-Ti alloys - Chemical etching
Ni-20Cr and Ni-20Cr-45Fe - Chemical etching
Ni-Ag alloys - Chemical etching
Ni-Ag alloys and superalloys - Chemical etching
Ni-Ag, Ni-Al, Ni-Cr, Ni-Cu, Ni-Fe and Ni-Ti alloys - Electrolytic etching
Ni-Al alloy - 70Ni-30Al
Ni-Al alloy - Al-Al3Ni eutectic
Ni-Al alloy - Al-Al3Ni eutectic
Ni-Al alloy - Al-Al3Ni eutectic
Ni-Al alloy - Al-Al3Ni eutectic
Ni-Al alloy - Al-Al3Ni eutectic
Ni-Al alloy - Al-NiAl3 eutectic
Ni-Al alloy - Alloy with 0.1-0.5 at.% Al
Ni-Al alloy - Alloy with 4-8% Al
Ni-Al alloy - Beta type alloys
Ni-Al alloy - Electrolytic thinning
Ni-Al alloy - Electrolytic thinning
Ni-Al alloy - Electrolytic thinning
Ni-Al alloy - Electrolytic thinning
Ni-Al alloy - Electrolytic thinning
Ni-Al alloy - Ni rich NiAl - Electrolytic polishing
Ni-Al alloy - Ni-6/8Al - Electrolytic polishing
Ni-Al alloy - Ni3Al
Ni-Al alloys (3-25% Al) - Chemical etching
Ni-Al alloys - Chemical etching
Ni-Al alloys - Chemical etching
Ni-Al alloys - Chemical etching
Ni-Al alloys - Electrolytic polishing
Ni-Al system - Al-Al3Ni eutectic - Electrolytic polishing
Ni-Al system - Chemical etching
Ni-Al, Ni-Cr-Al and Ni-Cr-Ti alloys - Electrolytic etching
Ni-Al-Cu steel - Fe-0.3C-4Ni-1Al-1Cu
Ni-Al-Hf alloy - Ni-20/23Al-5/7.5Hf
Ni-Al-Mo alloy - 65Ni-8Al-27Mo
Ni-Al-Mo alloy - Ni-8Al-26.4Mo, Ni-6.3Al-31.2Mo
Ni-Al-Mo alloy - NiAl/Mo eutectic - Selective etch for Mo
Ni-Al-Mo alloy - Ternary eutectic of gama prime-Ni3Al, gamma-nickel rich f.c.c and alpha-Mo
Ni-Al-Nb alloy - Ni rich alloys
Ni-Al-Nb alloy - Ni3Al-Ni3Nb eutectic
Ni-Al-Ta alloy - Ni-20/29Al-2.5/7.5Ta
Ni-Al-Ti alloy - Ni3(Al,Ti) - Electrolytic thinning
Ni-Al-Ti alloy - Ni3AlTi - Electrolytic polishing
Ni-Al-Ti alloy - Ni3AlTi, etch pits
Ni-Al-Ti alloys - Electrolytic etching
Ni-B-P glass - Ni80-P10-B10 splat cooled alloy
Ni-B-Si-C alloy - Electrolytic polishing
Ni-Be-Cr alloys - Electrolytic thinning
Ni-C alloys - Chemical etching
Ni-Chrome - Electrolytic polishing
Ni-Chrome - Electrolytic polishing
Ni-Co (15%) specimens - Electrolytic thinning
Ni-Co alloy - Alloy with 32 at.% Ni
Ni-Co alloy - Electrolytic thinning
Ni-Co alloy - Electrolytic thinning by window technique
Ni-Co-Al alloys - Electrolytic polishing and etching
Ni-Co-Cr alloy - 29-34 wt.% Ni, 30-34 wt.% Co, 32-41 wt.% Cr
Ni-Co-Cr alloy - 29-34 wt.% Ni, 30-34 wt.% Co, 32-41 wt.% Cr
Ni-Co-Cr alloy - Electrolytic thinning
Ni-Co-Cr-Mo alloy - 30-32 wt.% Ni, 30-32 wt.% Co, 34 wt.% Cr, 2-7 wt.% Mo
Ni-Co-Cr-Mo alloy - 30/32 wt.% Ni-30/32 wt.% Co-34/30 wt.% Cr-1/7 wt.% Mo
Ni-Co-Cr-W alloy - 28-32 wt.% Ni, 28-32 wt.% Co, 32-34 wt.% Cr, 2-11 wt.% W
Ni-Co-Cr-W alloy - 28-32 wt.% Ni-28-32 wt.% Co-32-34 wt.% Cr-2-11 wt.% W
Ni-Co-Ti alloy - Ti4Co3Ni
Ni-Cr specimens - Electrolytic polishing
Ni-Cr alloy - Alloys with < 20% Cr
Ni-Cr alloy - Alloys with 10-12% Cr
Ni-Cr alloy - Electrolytic polish and etching
Ni-Cr alloy - Electrolytic thinning by window technique
Ni-Cr alloy - Ni2Cr - Electrolytic polishing
Ni-Cr alloy - Preferential electrolytic polishing for chromium rich phases
Ni-Cr alloys - Chemical etching
Ni-Cr alloys - Chemical etching
Ni-Cr alloys - Electrolytic etching
Ni-Cr alloys - Electrolytic etching
Ni-Cr alloys - Electrolytic etching
Ni-Cr alloys - Electrolytic etching
Ni-Cr alloys - Electrolytic etching
Ni-Cr alloys - Electrolytic etching
Ni-Cr alloys - Etching for carbides
Ni-Cr as an evaporated thin film on (100) oriented Si wafers - Chemical etching
Ni-Cr evaporated thin films on (100) Si wafers - Chemical etching
Ni-Cr matrix - TaC wire composite-Shows up fibre shape and facets (111) planes in FCC matrix
Ni-Cr residual metals - Chemical cleaning
Ni-Cr specimens - Chemical etching
Ni-Cr specimens - Electrolytic cutting
Ni-Cr specimens - Electrolytic thinning
Ni-Cr stainless steel - Fe-20Cr-25Ni-0.4Mn-0.5Nb-0.01C
Ni-Cr steel - Fe-3.5Ni-1.4Cr-0.3C
Ni-Cr steel - Fe-3.5Ni-1.7Cr-0.3C
Ni-Cr thin film deposition as a bimetallic layer of Au/Ni-Cr - Chemical etching
Ni-Cr-Al alloy - 82Ni-12Cr-6Al - Electrolytic polishing
Ni-Cr-Al alloy - Electrolytic thinning by window technique
Ni-Cr-Al alloy - Ni-Al/Cr eutectic
Ni-Cr-Al alloy - NiAl/Cr eutectic
Ni-Cr-Al alloy - NiAl0Cr eytectic 33 at.% Ni, 33 at.% Al, 34 at.% Cr
Ni-Cr-Al alloys - Chemical etching
Ni-Cr-Al-C alloy - Ni-15Cr-3/10Al-0.05/0.3C
Ni-Cr-Al-Mo alloy - (NiAl-Cr(Mo)) eutectic
Ni-Cr-Al-Mo-Nb-Ti-Zr alloy - Inco 713LC Ni-12Cr-6Al-0.8Ti-4.6Mo-1.5/2.5Nb-0.1Zr-(+C,B)
Ni-Cr-Al-Ta alloy - Ni-16Cr-5Al-4Ta - Reveals gama prime precipitates
Ni-Cr-Al-Ti alloy - 10-12 Cr, 5-6 Ni, 1 Ti
Ni-Cr-Al-Ti alloy - In 853 or Inconel MA 753, Ni-19Cr-1.2Al-2.4Ti (+Zr, B, Y2O3)
Ni-Cr-Al-Ti alloy - Ni-15Cr-3(Ti+Al), Ni-20Cr-3(Ti+Al), Ni-20Cr-4(Ti+Al)
Ni-Cr-Al-Ti alloy - Ni-4/13Al-6.5/20.5Cr-0.25/4.75Ti (at.%)
Ni-Cr-Al-Ti-C alloy - 10-12% Cr, 5-6% Al, 1% Ti, 0.1% C
Ni-Cr-Al-Ti-C alloy - Ni-15Cr-1/4.5Al-2.5/6Ti-0.15/0.25C
Ni-Cr-Al-Ti-Ta alloy - 10-12 Cr, 5-6 Al, 1 Ti, 0.15 Ta
Ni-Cr-Al-Ti-Ta-C alloy - 10/12Cr-5/6Al-1Ti-0/15Ta-0/1C
Ni-Cr-Al-Ti-W alloy - Ni-4/13Al-6.5/20.5Cr-0.25/4.75Ti-<4W (at.%)
Ni-Cr-Al-Ti-Y alloy - Inconel MA753 Ni-22Cr-1.6Al-2.7Ti-1.3Y2O3
Ni-Cr-Al-yttria alloy - 48Ni-16Cr-5Al-1Y2O3
Ni-Cr-C alloy - Fe-25Cr-0.25C
Ni-Cr-C alloys - Electrolytic etching
Ni-Cr-Co-C alloys - 25Cr-30Co-0.15C-Ni, Co-25Cr-10Ni-0.15/0.25 C
Ni-Cr-Co-Mo-Ti-Al-Fe-C alloy - Waspaloy Ni-0.06C-19Cr-4Mo-14Co-0.5Fe-1.4Al-3Ti
Ni-Cr-Fe alloy - Alloys with up to 40% Fe - Reveals chromium rich alpha and sigma phases
Ni-Cr-Fe alloy - Electrolytic thinning by Bollmann technique
Ni-Cr-Fe alloys (Inconel) - Electrolytic thinning
Ni-Cr-Fe aloys - Chemical etching
Ni-Cr-Fe aloys - Chemical etching
Ni-Cr-Fe-Al alloy - Up to 40% Fe and 2% Al - Electrolytic polishing
Ni-Cr-Fe-Mo alloys - Hastelloy X Ni-21Cr-18Fe-9Mo (+C)
Ni-Cr-Fe-Mo-Co-Mn-W-C alloy - Ni-21Cr-19Fe-8.6Mo-2Co-0.6Mn-0.5W-0.1C, Hastelloy X
Ni-Cr-Fe-Mo-Nb alloys - Inconel 718, Ni-19Cr-19Fe-3Mo-5Nb+Al,Ti,C
Ni-Cr-Fe-Nb alloy - Up to 40% Fe and 1% Nb - Electrolytic polishing
Ni-Cr-Fe-Si alloy - Alloys with up to 40% Fe, 1% Si - Electrolytic polishing
Ni-Cr-Mn steel - Fe-0.3C-8/21Ni-9Cr-2Mn
Ni-Cr-Mo-Al-C alloy - Ni-15Cr-3/5Mo-7Al-0.2C
Ni-Cr-Mo-C alloy - Ni-15Cr-5Mo-0.2C
Ni-Cr-Mo-Ti-Al-C alloy - Ni-15Cr-0.1/5Mo-2.5/3.5Al-4.5/5.5Ti
Ni-Cr-Mo-W-Al-Ta-C alloy - Ni-6Cr-3Mo-5W-6Al-8Ta-0.1C
Ni-Cr-Ta alloy - 10-12% Cr, 0-15% Ta
Ni-Cr-Ta alloy - 25 wt.% Ta, 10 wt.% Cr
Ni-Cr-Ta-C alloy - 10-12 Cr, 0-15 Ta, 0-1 C
Ni-Cr-Th alloy - 20% Cr, 2% ThO2 - Electrolytic polishing and etching
Ni-Cr-Th alloy - Electrolytic and chemical etching
Ni-Cr-Th alloy - Ni-20Cr-1.35/2.50 ThO2 - Electrolytic thinning and chemical etching
Ni-Cr-Ti alloy - Electrolytic thinning by window technique
Ni-Cu alloy (Monel) - Chemical etching
Ni-Cu alloy - Electrolytic thinning by window technique
Ni-Cu alloys (Monel) - Electrolytic polishing, chemical etching
Ni-Cu alloys - For revealing grain structure
Ni-Fe alloy - 33Ni-67Fe
Ni-Fe alloy - 50Ni-50Fe, 75Ni-25Fe - Shows secondary twins in drawn and rolled material
Ni-Fe alloy - Differences of orientation of martensite plates within prior austenite grains
Ni-Fe alloys (Ni3Fe) - Chemical etching
Ni-Fe alloys - Chemical etching
Ni-Fe alloys - Chemical etching
Ni-Fe alloys - Chemical etching
Ni-Fe alloys - Chemical etching
Ni-Fe alloys, reveals grain boundaries - Chemical ecthing
Ni-Fe, Ni-Mn and Ni-Mo alloys - Chemical etching
Ni-Fe-Cr-Mo alloy - Electrolytic thinning by Bollmann technique
Ni-Fe-Cr-Mo alloys - Hastelloy X.280 Ni-20Fe-22Cr-9Mo-low C
Ni-Fe-Cr-Mo-Ti-Al-C alloy - 901 alloy Ni-0.05C-13Cr-5.6Mo-36.5Fe-0.25Al-2.9Ti
Ni-Fe-Cr-P-B alloy - Metglas 2826A - Fe37-Ni26-Cr14-P17-B6
Ni-Fe-Cr-P-B alloy - Metglas 2826A - Fe37-Ni26-Cr14-P17-B6
Ni-Fe-Cr-Ti alloy - IN 744X, Fe-26.5Cr-6.6Ni, 0.20Ti (+ 0.06 C)
Ni-Fe-Cr-Ti alloys - Chemical etching
Ni-Fe-Cr-Ti alloys - For alloys with Ni-26Fe-35Cr-0.6Ti
Ni-Fe-Mo-Zr alloy - Ni-12.7Fe-6.7Mo-0.4Zr
Ni-Fe-P-B alloy - Ni40-Fe40-B14-B6 - Electrolytic polishing
Ni-Fe-Ti alloy - Fe-12Ni-0.25Ti
Ni-Fe-Ti alloy - Fe-12Ni-0.25Ti
Ni-Fe-Ti alloy - Fe-6Ti-10-25Ni
Ni-Fe-Ti alloy - Ti4Ni3Fe
Ni-Ga alloy - Alloy with approx. 50 at.% Ga
Ni-Ga alloy - Ni3Ga
Ni-Ge alloys (Ni3Ge single crystal) - Electrolytic polishing
Ni-Mn alloy - Approx. Ni3Mn
Ni-Mn alloy - Electrolytic thinning
Ni-Mn alloys - Dislocation etching
Ni-Mn alloys - Electrolytic polishing
Ni-Mn steel - 0.3% C-28% Ni-0.5% Mn
Ni-Mo alloy - Alloy with 16.7 at.% Mo
Ni-Mo alloy - Ni-12/33Mo
Ni-Mo alloy - Ni4Mo
Ni-Mo alloy - Ni4Mo - Electrolytic polishing
Ni-Mo alloy - Ni4Mo - Electrolytic thinning
Ni-Mo alloy - Ni4Mo and Ni3Mo
Ni-Mo alloys - Chemical etching
Ni-Mo steel - Fe-24Ni-4Mo-0.25C
Ni-Mo-Cr-Ti-C alloy - Hastelloy-N, Ni-13Mo-4Cr-2Ti-0.06C
Ni-Mo-Fe alloy - Hastelloy B 65Ni-27Mo-5Fe (+0.3Co, 0.3Si, 0.5Mn, 0.4Cr, 0.3V)
Ni-Nb alloy - Electrolytic thinning for foils
Ni-Nb alloys (Ni-Ni3Nb eutectic) - Electrolytic thinning
Ni-Nb alloys (Ni-Ni3Nb eutectic) - Sample preparation
Ni-Nb alloys - Chemical etching
Ni-Nb-Al alloys - Electrolytic polishing and chemical ecthing
Ni-Si-B glass - Splat cooled alloys
Ni-Si-B system - Chemical etching
Ni-Ta alloy (25 wt.% Ta) - Electrolytic and chemical etching
Ni-Ta alloy (Ni3Ta) - Chemical etching
Ni-Ta alloy - Electrolytic thinning for films
Ni-Ta alloys (low Ta) - Chemical polishing and etching, electrolytic thinning
Ni-Ta alloys - Chemical etching
Ni-Ta-Cr-Al-C eutectic alloy - 69Ni-10Cr-5Al-15Ta-1C
Ni-Ta-Cr-Mn alloy - 57Ni-21Ta-15Cr-7Mn
Ni-Th system - Alloys with 50-70% Ni
Ni-Ti alloy (10 at.% Ti) - Chemical etching
Ni-Ti alloy (NiTi) - Chemical etching
Ni-Ti alloy (NiTi) - Chemical polishing
Ni-Ti alloy (NiTi) - Electrolytic polishing and thinning
Ni-Ti alloy (NiTi) - Electrolytic thinning
Ni-Ti alloys - Chemical etching
Ni-Ti alloys, superalloys - Chemical etching
Ni-Ti-Al alloy - TiNi + 0.05/3.4 at.% Al
Ni-Ti-Al-Si alloys - Chemical etching
Ni-Ti-C alloy - Alloys with 2 wt.% Ti and 0.4 wt.% C
Ni-Ti-Cr-Al alloy - NiTi-2.5 at.% Al-1.5/5 at.% Cr
Ni-V alloy (Ni3V) - Electrolytic thinning and polishing
Ni-V system (Ni3V) - Electrolytic thinning
Ni-W alloy (45% W) - Electrolytic polishing
Ni-W alloys (Ni-26/38% W) - Electrolytic polishing
Ni-W alloys - Electrolytic etching
Ni-Zn alloys (56 wt.% Zn) - Chemical etching
Ni-Zn alloys - Chemical etching
Ni-Zn alloys - Chemical etching
Ni-Zn ferrite (Fe-Ni-O-Zn) - Chemical etching
Ni-Zn ferrite (Fe-Ni-O-Zn) - Ni0.36 x Zn0.64 x Fe2O3
Ni-Zr alloys - Electrolytic etching
Ni-base superalloy - Electrolytic polishing
Ni-base superalloys - Electrolytic polishing
Ni22Cr9Mo steel - Chemical etching
Ni2B thin film - Metal forming
Ni50Al46Nb4 or Ni40Al39Nb21 alloys - Twin jet polishing mehod
NiAl single crystal specimens - Electrolytic polishing
NiAl specimens and alloys - Electrolytic polishing
NiB thin films - Ketone, cleaning
NiChrome 80-20 etchant - Chemical etching
NiChrome 80-20 etchant - Chemical etching
NiChrome 80-20 etchant - Electrolytic etching
NiCu (30%) single crystal - Thermal forming
NiCu (5%) to NiCu (80%) single crystal wafers - Chemical etching
NiI single crystal - Alcohol removal
NiMn single crystal specimens - Electrolytic etching
NiO (100) cleaved wafers - Thermal etching
NiO - Chemical etching
NiO - Dislocation etching
NiO - Electrolytic etching
NiO single crystal specimens - Physical thinning
NiO specimens - Chemical etching
NiO thin film platelets - Chemical etching
NiS as the natural mineral Millerite - Chemical etching
NiSi thin films deposited on silicon substrates - Ionized gas etching
NiSi2 thin films deposited on silicon wafers - Chemical cleaning
NiSi2 thin films grown on silicon substrates - Chemical etching
NiTi shape memory alloys - General etchant
NiTi shape memory and superelastic alloys - Chemical etching
NiTi single crystal specimens - Chemical etching
NiZn ferrite and Ni ferrite - Chemical etching
Nichrome (20% Cr) - Chemical etching
Nichrome-lanthanum oxide system - Ni-20Cr-1.2/1.6La2O3
Nickel aluminate spinel - Chemical etching
Nickel - Ni-Ag, Ni-Al, Ni-Cr, Ni-Cu, Ni-Fe, and Ni-Ti alloys
Nickel - 80Ni-20Cr and 35Ni-20Cr-45Fe alloys
Nickel - Carbides in Ni-Cr alloys
Nickel - Chemical etching
Nickel - Chemical polishing
Nickel - Chemical polishing
Nickel - Contrast etching
Nickel - Electrolytic etching
Nickel - Electrolytic etching
Nickel - Electrolytic etching
Nickel - Electrolytic etching
Nickel - Electrolytic etching
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing
Nickel - Electrolytic polishing and etching
Nickel - Electrolytic polishing and etching
Nickel - Electrolytic polishing, chemical etching
Nickel - Electrolytic thinning
Nickel - Electrolytic thinning
Nickel - Electrolytic thinning
Nickel - Electrolytic thinning
Nickel - Electrolytic thinning by Bollmann technique
Nickel - Electrolytic thinning by window technique
Nickel - Electrolytic thinning by window technique
Nickel - Ni and Ni base alloys, Ni-Cr alloys
Nickel - Ni and Ni base alloys, Ni-Cr and Ni-Cr alloys
Nickel - Ni and Ni base alloys, Ni-Cr and Ni-Fe alloys, cast alloys
Nickel - Ni and Ni base alloys, Ni-Cr, Ni-Fe alloys, superalloys of the Nimonic type
Nickel - Ni base superalloys - Gamma precipitates - Ti and Nb microsegregations
Nickel - Ni base superalloys
Nickel - Ni silicides
Nickel - Ni-Al alloys
Nickel - Ni-Al, Mo-Ni, Ni-Ti alloys
Nickel - Ni-Au, Ni-Mo, and Ni-Cr alloys - Micro inhomogenities in superalloys
Nickel - Ni-Cu alloys, Ni base superalloys
Nickel - Ni-Fe and Ni-Al alloys
Nickel - Ni-Fe, Ni-Cu, and Ni-Ag alloys, Ni base superalloys
Nickel - Ni-Zn alloys
Nickel - Ni-Zn-Ag, Ni-Ag-Ni-Cu, and Ni-Al-Mo alloys
Nickel - One of the best electrolyte for universal use
Nickel - Pure types of Ni and alloys with high Ni content, Ni-Ti and Ni-Cu alloys
Nickel - Pysical etching
Nickel alloy - Jet machinning
Nickel alloys - Electrolytic polishing
Nickel alloys - Electrolytic polishing
Nickel and Ni-Co alloys - Electrolytic polishing
Nickel and Ni-Cu alloys - Chemical etching
Nickel and nickel alloys - Electrolytic polishing
Nickel and nickel alloys - Electrolytic polishing
Nickel and nickel alloys - Electrolytic polishing
Nickel and nickel alloys - Electrolytic polishing
Nickel and nickel alloys - Electrolytic polishing
Nickel and nickel alloys - Electrolytic polishing
Nickel and nickel-copper alloys (Ni-Cu) - For Monel K-500 alloy
Nickel and nickel-copper alloys (Ni-Cu) - For revealing grain boundaries
Nickel and nickel-copper alloys (Ni-Cu) - Microscopic examination of grain boundaries and general structure
Nickel base alloy - Electrolytic thinning by PTFE holder
Nickel base superalloy - Selective phase contrasting
Nickel base superalloy GMR 235 - Chemical etching
Nickel deposits on steel - Chemical etching
Nickel ferrite (Ni-Fe-O) - Chemical etching
Nickel oxide (NiO) - Chemical etching
Nickel oxide (NiO) - Chemical thinning
Nickel phosphorus alloys (Ni-P) - Electrolytic and chemical polishing
Nickel phosphorus glass (Ni-P) - Ni80P20
Nickel plating
Nickel single crystal - Electrolytic polishing
Nickel specimens - Chemical etching
Nickel specimens - Chemical etching
Nickel specimens - Chemical etching
Nickel specimens - Chemical etching
Nickel specimens - Electrolytic polishing
Nickel specimens TD - Thorium deposited nickel - Etch for grain boundary
Nickel specimens and nickel alloys - Electrolytic polishing
Nickel superalloy 718 - Chemical etching
Nickel superalloy 718 - Chemical etching
Nickel superalloy 718 - Chemical etching
Nickel superalloy 718 - Electrolytic etching
Nickel superalloy 718 - Electrolytic etching
Nickel superalloy 718 - Electrolytic etching
Nickel superalloy 718 - Electrolytic etching
Nickel superalloys - Etching for gamma prime in superalloys
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel superalloys - Production of thin foils for electron microscopy
Nickel(CP, HP) - Dislocation etching
Nickel-Ni base superalloys - Especially suitable for Hastelloy types
Nicrofer alloy - Electrolytic polishing
Nimonic 105 - Ni-0.14C-0.3Fe-14.4Cr-1.3Ti-4.7Al-20Co-5Mo
Nimonic 115 alloy - Ni-15Cr-15Co-4Ti-3.5Mo-5Al
Nimonic 80 alloy - Ni-21Cr-2.7Ti-1.6Al-1.5Fe-2Co-0.8Si-0.4Mn-0.2Cu-0.1C
Nimonic 80A - Electrolytic thinning, electrolytic polishing
Nimonic 80A - Ni-20Cr-1.3Al-2.3Ti
Nimonic PE 16 - Fe-43.5Ni-16.5Cr-1.2Ti-3.2Mo-1.2Al
Nimonic alloys - Nimonic 108, 109, 115, 120, EPK 55, Nimonic PK 33 and PK 50
Nimonic alloys - Nimonic 263
Nimonic alloys - Nimonic 75, 80A, 90, 93, 105, 108, 109, 115, 120, EPK 55, and EPK 57. Nimocast alloys
Nimonic alloys - Nimonic 901
Nimonic alloys - Nimonic PE 7, PE 11, PE 16, Nimonic 901
Nimonic alloys - Nimonic PK 31
Nimonic alloys - Nimonic PK 31, Nimonic EPK 57
Nimonic alloys - Nimonic PK 31, Nimonic EPK 57
Nimonic alloys - Nimonic PK 33, PK 50, Nimonic 901
Nimonic alloys - Nimonic alloys 75, 80A, 90, 93, 105
Niobium (high purity) - Etch pit etching
Niobium - Attack polishing
Niobium - Cathodic etching
Niobium - Chemical etching
Niobium - Chemical etching
Niobium - Chemical etching
Niobium - Chemical etching
Niobium - Chemical polishing
Niobium - Chemical polishing
Niobium - Chemical polishing
Niobium - Chemical polishing
Niobium - Chemical polishing
Niobium - Chemical polishing
Niobium - Cr, Nb, and alloys
Niobium - Dislocation etching
Niobium - Dislocation etching
Niobium - Dislocation etching
Niobium - Dislocation etching
Niobium - Dislocation etching
Niobium - Dislocation etching
Niobium - EBSD sample preparation - Dislocation etching
Niobium - Electrolytic etching
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic polishing
Niobium - Electrolytic thinning
Niobium - Electrolytic thinning
Niobium - Electrolytic thinning
Niobium - Electrolytic thinning
Niobium - Electrolytic thinning (wire)
Niobium - Electrolytic thinning by window technique
Niobium - Electrolytic thinning by window technique
Niobium - Electromechanical polishing
Niobium - Etch pits etching
Niobium - Final electrolytic polishing
Niobium - For dislocation etch pits
Niobium - Mo, Ta, Nb, Mo-Ti alloys, Ta-Nb alloys, Pure V and V base alloys
Niobium - Nb, Ta, Mo and their alloys
Niobium - Ta and Ta base alloys, Nb and Nb base alloys
Niobium - Ta base alloys, Nb base alloys
Niobium - Ta base and Nb base alloys
Niobium - Ta, Nb, and their alloys, Cr and Cr silicide, Re silicide, W-Th alloys
Niobium - Twin jet electrolytic polishing
Niobium carbide (NbC) - Dislocation etching
Niobium carbide (NbC) - Thermal etching
Niobium oxide (NbO, Nb2O3, Nb2O5) - Chemical etching
Niobium single crystal - Chemical polishing
Niobium single crystal - Electrolytic polishing
Niobium single crystal - Electrolytic polishing
Niobium single crystal - Produces triangular etch pits on (111) planes
Niobium specimens - Chemical etching
Niobium specimens - Chemical etching
Niobium specimens - Chemical etching
Niobium specimens - Chemical etching
Niobium specimens - Chemical etching
Niobium specimens - Chemical etching
Niobium, Tantalum - Attack polishing
Niobium, Tantalum - Attack polishing
Niobium-Tin (Nb-Sn) - Nb3Sn
Niobium-tin (Nb-Sn) - Chemical thinning
Nital (0.5-10%) - Yb-Zn system - Chemical etching
Nital (1%) - Co-Ce-Fe alloy - Co5CeFe02
Nital (1%) - Co-Dy-Mn alloy - Co5DyMn0.2
Nital (1%) - Co-Dy-Ni alloy - Co5DyNi0.2
Nital (1%) - Co-Dy-Pb alloy - Co5DyPb0.2
Nital (1%) - Co-Dy-Pd alloy - Co5DyPd0.2
Nital (1%) - Co-Dy-Pt alloy - Co5DyPt0.2- General microstructure
Nital (1%) - Co-Dy-Si alloy - Co5DySi0.2- General microstructure
Nital (1%) - Co-Er alloys - Chemical etching
Nital (1%) - Co-Er-Fe alloy - Co5ErFe0.2- General microstructure
Nital (1%) - Co-Fe-Y alloy - Y-Co(1-x)-Fe(x)- General microstructure
Nital (1%) - Co-Gd-Fe alloy - Co5GdFe0.2
Nital (1%) - Co-Ho system - Approx. HoCo5
Nital (1%) - Co-Ho-Fe alloy - Co5HoFe0.2
Nital (1%) - Co-La-Fe alloy - Co5LaFe0.2
Nital (1%) - Co-Lu alloy - Approx. LuCo5
Nital (1%) - Co-Nd-Fe alloy - Co5NdFe0.2
Nital (1%) - Co-Pr-Fe alloy - Co5PrFe0.2
Nital (1%) - Co-Sm-Al alloy - Co5SmAl0.2
Nital (1%) - Co-Sm-Fe alloy - Co5SmFe0.2
Nital (1%) - Co-Tb alloy - Approx. TbCo5
Nital (1%) - Co-Tb-Al alloy - Co5TbAl0.2
Nital (1%) - Co-Tb-Fe alloy - Co5TbFe0.2
Nital (1%) - Co-Tm alloy - Approx. Co5Tm
Nital (1%) - Co-Yb alloy - Aprox. YbCo5
Nital (1%) - Fe-Ni-Co alloy - Iron rich alloys
Nital (1%) - La-Cd alloys - Chemical etching
Nital (1%) - La-Ni alloys - Chemical etching
Nital (1%) - Mn-C alloys - Chemical etching
Nital (10%) - Magnesium - Chemical polishing
Nital (10%) - Nickel superalloy 718 - Electrolytic etching
Nital (2%) - Ce-Zn alloys - Chemical etching
Nital (2%) - Fe-Mo-Co alloy - Chemical etching
Nital (2%) - Mg-Li alloys - Chemical etching
Nital (2-10%) - Pr-Zn alloys - Chemical etching
Nital (3/4%) - Y-Mn alloys - Chemical etching
Nital - AISI 4340 annealed steel - Chemical etching
Nital - Carbon and alloy steels - Develops ferrite grain boundaries in low carbon steels
Nital - Carbon and alloy steels with medium carbon content - General structure (most used etchant for routine work)
Nital - Cd-Sc alloy - Alloy with 3% Sc
Nital - Co-Ce-Al alloy - Ce(1-x) Al (x) Co5, 0< x < 0.6
Nital - Co-Pr-Al alloy - Co5Pr(x)Al(1-x)
Nital - Dual-phase steel
Nital - Fe pure metal samples - Chemical etching
Nital - Fe-Ni (5%)-O (15%) specimens - Chemical etching
Nital - Iron and steels - Chemical etching
Nital - Iron, steels, cast irons - Most common etchant
Nital - Mg and alloys - Chemical etching
Nital - Permanent magnet materials - Rare earth (Co3Cu1.6Fe0.5Ce)
Nital - Pure Gd, RE-Co alloys, grain bounday etchant - Chemical ecthing
Nital - Pure iron, carbon steels, low-alloy steels, and gray cast irons and other alloys
Nital - Steel, carbon type - Chemical etching
Nital - Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 800, general structure; grain boundaries
Nital - Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 825, general structure; grain boundaries
Nital - Zn-Cd alloys - Chemical etching
Nital - Zn-Sn alloy - Zn-Sn alloys processed in a study of solidification in lamellar eutectic systems
Nital 1% - CaCO3 - Dislocation etching
Nital 1% - Co-Dy alloy - DyCo5 alloy
Nital 2% - Cast irons - Observation of ferrite grains boundaries at higher magnification
Nitinol - NiTi alloys
Nitronic 50 (XM-19) stainless steel wire - Chemical etching
Nitrosulfuric (Wesley Austin's) etchant - Iron and steels - Chemical etching
Nivco alloy - Chemical etching
No. 25 alloy - Shows twinned structure
No. 36 alloy - Chemical etching
No.176 alloy - Electrolytic etching
Non-oxide ceramics - Thermal etching
Noren's etchant - Steel weld - Chemical etching
Np specimens - Chemical polishing/etching
O.R.F. formulation - For Mo
OFHC copper, Cu-Zn alloys (10-15% Zn), Cu-7.5% Al alloy - Chemical polishing
ORNL color etchant - For molybdenum
OSD alloy MA956 - Fe-20Cr-4.5Al-0.5Ti-0.5Y2O3
Oberhoffer's etchant - Unalloyed and low-alloy steels
Os - Electrolytic etching
Os alloys - Chemical etching
Os and Os-W alloys - Chemical etching
Os specimens - Chemical etching
Os-Ir alloys - Chemical etching
OsS2 single crystal specimens - Chemical polishing
OsTe2 single crystal specimens - Chemical polishing
Osmium - Electrolytic polishing
Osmium - Os and Os-W alloys
Osmium - Os base alloys, pure Pd and Pd alloys, Pt-Au alloys, Ir
Oxide Ceramics (Be, Zr, Mg, Ca) - BeO, Zr2O3, BaO, MgO, Ca8Zr1-xOy
Oxide ceramics (Al, Si, Be) - Al2O3, SiO2, BeO-UO2-Y2O3 mixtures (toxic)
Oxide ceramics (Al, U, Th) - Al2O3, UO2,ThO2, Al2O3-MgO mixtures
Oxide ceramics (Ca, Mg) - CaO, MgO
Oxide ceramics (Ce, Sr, Al, Zr)-CeO, SrTiO3, Al2O3, ZrO-ZrC mixtures
Oxide ceramics (Mg, U) - MgO, UO2
Oxide ceramics (Th, Y) - ThO2-Y2O3 mixtures (toxic)
Oxide ceramics (U, Th, Pu)-UO2, ThxUyO2 (toxic), PuO2, cast (toxic), PuO2 (gamma, sintered)-toxic
Oxide ceramics (Zr, U, Nd) - ZrO2, U3O8 (toxic)
Oxide ceramics - Al2O3 - Relief formation
Oxide ceramics - Al2O3, Al2O3 x MgO, SnO2 - Physical etching
Oxide ceramics - Al2O3, Al2SiO5
Oxide ceramics - Al2O3, BeO, UO2
Oxide ceramics - BaTiO3, BaTi3O7
Oxide ceramics - BeO
Oxide ceramics - BeO
Oxide ceramics - CaO
Oxide ceramics - Cr2O3, CeO2, Al2O3
Oxide ceramics - Eu2O3
Oxide ceramics - MgO, ThO2, Al2NiO4, PuO3 (gamma, sintered), Y2O3-ZrO2 and Sm2O3-ZrO2 mixtures
Oxide ceramics - MgO-Al2O3-SiO2-ZrO2 mixtures
Oxide ceramics - Nb oxides, NbO (blue), NbO2 (cyan), Nb3O3 (red-dish-brown)
Oxide ceramics - NiO
Oxide ceramics - U4O9 (toxic)
Oxide ceramics - UO2
Oxide ceramics - UO2
Oxide ceramics - UO2
Oxide ceramics - UO2 - Grain size
Oxide ceramics - UO2, UO2-PuP2, UO2-U4O9 and UO2-CeO2 mixtures
Oxide ceramics - UO2-PuO2 mixtures
Oxide ceramics - ZnO
Oxide ceramics combinations - Thermal and chemical etching
Oxide ceramics combinations - Thermal and chemical etching
Oxide dispersion hardened MA6000L alloy - Ni-14Cr-4.6Al-4W-2.3Ti-2.1Ta-2Mo-0.75Y-0.6O2-0.2Fe-0.2N-0.07C-0.07Zr (+B)
Oxide scale - NiO - Potentiostatic etching
Oxygen enriched Zircaloy 2 - Zr-1.2/1.3Sn-< 0.12O2 - 0.13Cr
Oxygen sensing etchant for steels - This etchants is claimed as good for detection of oxygen penetration into steels
Oxyhychroxyapatite - Ca10(PO4)6 x (OH2)2
P etchant - SiO2 thin films deposited on (100) silicon wafers - Chemical etching
P-1 etchant - Zn (0001) wafers - Chemical etching
P-2 etchant - Zn (0001) wafers and cylinders - Chemical etching
P-3 etchant - Zn (0001) wafers and cylinders - Chemical etching
P-ED (EPW) etchant - Si (100) wafers within +/-1? of the plane - Chemical etching
P-Etchant - Chemical etching
P2Cr5 thin film - Chemical etching
P2O5 and other phosphorus compounds - Chemical etching
P2O5 powder - Chemical etching
PBr etchant - CdTe (111), (100), and (110) wafers - Chemical etching
PH13-8 Mo steel - Chemical etching
PLZT [(Pb,La)(Zr,Ti)O3] - Chemical etching
PLZT [(Pb,La)(Zr,Ti)O3] - Chemical etching
PZT (PbZrTiO) - Chemical etching
PZT materials (O-Pb-Ti-Zr) - Chemical ecthing
PZT materials (O-Pb-Ti-Zr) - Chemical etching
PZT materials (O-Pb-Ti-Zr) - Chemical etching
PZT materials (O-Pb-Ti-Zr) - Chemical etching
Palladium - Au alloys with less thn 90% content of precious metals
Palladium - Cathodic etching
Palladium - Chemical etching
Palladium - Chemical etching
Palladium - Electrolytic polishing
Palladium - Electrolytic polishing
Palladium - For Au alloys with high content of precious metals
Palladium - Os base alloys, pure Pd and Pd alloys, Pt-Au alloys, Ir
Palladium - Pure Au and Au-rich alloys, Pd and Pd alloys
Palladium - Pure Au and Pd, Au-Pd, Pd alloys with more than 90% concentration of precious metals
Palladium - Pure Pt and Pd, Au alloys
Palladium alloys - Chemical etching
Palladium and palladium alloys - Electrolytic etching
Palladium welded to Nickel-Silver (Pd, Ni-Ag) - Electric contact material
Palladium-Copper (Pd-Cu) - Electric contact material
Palladium-Platinum-Gold-Silver-Copper-Zinc (Pd-Pt-Au-Ag-Cu-Zn) - Electric contact material
Palladium-Ruthenium (Pd-Ru) - Electric contact material
Palladium-Silver (Pd-Ag) - Electric contact material
Palmerton's etchant - Pure Zn and alloys - Chemical etching
Palmerton's etchant - Zinc specimens - Chemical etching
Palmerton's etchant 2 - Pure Zn and Zn alloys
Palmerton's etchant, modified - All Zn alloys, for pressure die-casting, Zn coatings - Chemical etching
Palmerton's etchant, modified - Zn die-casting alloys - Chemical etching
Palmerton's etchant, modified - Zn-Cu alloys - Chemical etching
Panseri's etchant - Al and Al alloys - Chemical etching
Parameters for the ion beam etching of different layer composites on steel
Pb (100) wafers - Chemical cleaning
Pb (100) wafers - Chemical etching
Pb (100) wafers - Chemical polishing
Pb (100) wafers - Electrolytic polishing
Pb alloys and solders - Chemical etching
Pb and Pb alloys - Chemical etching
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - Electrolytic polishing
Pb and Pb alloys - For etching high Pb content alloys a 5% solution is recommended
Pb and Pb alloys - Pb, Pb-Sb, Pb-Ca and Pb-Sn alloys
Pb and Pb alloys - Pb, Pb-Sb, Pb-Ca and Pb-Sn alloys with low tin content
Pb and Pb-Sn alloys (up to 2% Sb) - Electrolytic etching
Pb and Pb-Sn alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb and alloys - Chemical etching
Pb containing less than 2 Sb - Chemical etching
Pb samples - Chemical etching
Pb single crystal ingots - Chemical etching
Pb single crystal specimens - Chemical polishing
Pb solders and Pb-type alloys - Chemical etching
Pb specimens - Chemical cleaning
Pb specimens - Chemical etching
Pb specimens - Chemical polishing
Pb specimens - Oxide removal
Pb specimens and lead alloys - Chemical etching
Pb specimens and single crystal ingots - Chemical etching
Pb telluride - Attack polishing
Pb telluride - Chemical etching
Pb(NO3)2 grown as single crystals - Chemical polishing
Pb, Pb-Sn alloys (up to 25% Sn) - Chemical etching
Pb, Pb-Sn alloys (up to 3% Sn), and Pb solders - Chemical etching
Pb, Pb-Sn, Pb-Sn-Cd, Pb-Sn-Sb - Electrolytic polishing
Pb-Ag alloys (Pb-rich) - Chemical etching
Pb-Ag eutectic alloy specimens - Chemical etching
Pb-Ag specimen alloys - Electrolytic polishing/etching
Pb-Ag-Sb alloys (Pb-rich) - Chemical etching
Pb-As-Sb alloys - For lead rich alloys
Pb-Au alloys - For Pb rich alloys
Pb-Bi alloys - Chemical and physical etching
Pb-Bi alloys - Chemical etching
Pb-Ca alloys (Pb rich) - Chemical etching
Pb-Ca alloys - Chemical etching
Pb-Ca alloys, inclusions, grain-boundary etchant - Chemical etching
Pb-Cd alloys (Pb rich) - Chemical etching
Pb-Cd and Pb-Sn alloys - Chemical etching
Pb-Cd telleride-Pb(1-x) Cd(x) Te, x <= 0.03
Pb-Cd, Pb-Sn, and Pb-Sb alloys - Chemical etching
Pb-Cd-Sb alloys (Pb rich) - Chemical etching
Pb-Li alloys (Pb rich) - Chemical etching
Pb-Sb alloys - Chemical etching
Pb-Sb alloys - Chemical etching
Pb-Sb alloys - Electrolytic polishing
Pb-Sb alloys, hard lead - White metal and type metal with high Pb content - Chemical etching
Pb-Se-Te system (PbSe(1-x)Te(x)) - Polishing-etching
Pb-Sn + 2% Ag, solder - Chemical etching
Pb-Sn + Ag as various other alloys with or without silver - Chemical etching
Pb-Sn alloy - Chemical cleaning
Pb-Sn alloy contacts on silicon diodes - Chemical cleaning
Pb-Sn alloys (Pb rich) - Sample preparation
Pb-Sn alloys (low Pb) - Chemical etching
Pb-Sn alloys - Chemical etching
Pb-Sn alloys - Chemical etching
Pb-Sn alloys - Chemical etching
Pb-Sn alloys - Electrolytic polishing
Pb-Sn eutectic - Chemical etching
Pb-Sn eutectic - Electrolytic polishing
Pb-Sn eutectic alloy specimens - Chemical etching
Pb-Sn eutectics, solders - Chemical etching
Pb-Sn selenide (Pb(1-x)Sn(x)Se) - Electrolytic polishing and etching
Pb-Sn-Ag (2%), alloy #63 - Chemical cleaning
Pb-Sn-Te system (Pb(1-x)Sn(x))(1-y) Te(y) - Electrolytic polishing and etching
Pb-Sn-Te system - Chemical polishing
Pb-Sn-Te system - Electrolytic etching
Pb-Te-Au system - PbTe-Au section of the diagram
Pb-Te-Fe system - Lead telluride - Iron section
Pb-Ti eutectic alloy specimens - Chemical etching
Pb-rich alloys - Chemical etching
PbAg specimens of alloys - Electrolytic etching
PbGeTe single crystal ingots - Chemical etching
PbI2 as thin crystal platelets - Chemical etching
PbMoO4 single crystals - Pressure
PbO native oxide - Chemical etching
PbO single crystal plates - Cutting
PbS (100) cleaved wafers - Chemical cleaning
PbS (100) wafers - Chemical polishing
PbS (100) wafers - Chemical polishing/etching
PbS (100) wafers - Dislocation etching
PbS (100) wafers - Electrolytic polishing
PbS - Chemical etching
PbS specimen - Chemical etching
PbS, PbSe - Dislocation etching
PbSe (100) cleaved wafers - Chemical cleaning
PbSe (100) wafers - Eelectrolytic polishing/thinning
PbSe (100) wafers and other orientations - Chemical etching
PbSe (100) wafers and other orientations - Chemical polishing
PbSe (100) wafers and other orientations - Electrolytic polishing
PbSe - Dislocation etching
PbSnSe (100) wafers - Electrolytic polishing
PbSnTe (100) wafers - Chemical etching
PbSnTe (100) wafers - Chemical polishing
PbSnTe (100) wafers - Chemical polishing/etching
PbSnTe (100) wafers - Electrolytic polishing
PbTe (100) and PbSnTe (100) wafers - Electrolytic polishing
PbTe (100) cleaved wafers - Chemical etching
PbTe (100) p-type wafers - Oxide removal
PbTe (100) wafers - Chemical etching
PbTe (100) wafers - Chemical etching
PbTe (100) wafers - Chemical polishing
PbTe (100) wafers - Chemical polishing
PbTe (100) wafers - Dislocation etching
PbTe (100) wafers - Electrolytic polishing/etching
PbTe - Dislocation etching
PbTe - Dislocation etching
PbTe specimen - Thermal etching for etch pits
PbTe thin film - Acid float-off
PbZrO3 single crystal specimens - Chemical polishing
PbZrO3 single crystal specimens - Chemical polishing
PbZrO3 single crystal specimens - Chemical polishing
Pd 99.95% pure single crystal specimens - Electrolytic polishing
Pd and alloys - Chemical etching
Pd and alloys - Chemical etching
Pd and alloys - Chemical etching
Pd and alloys - Electrolytic etching
Pd single crystals and thin films - Chemical etching
Pd-Ag-Cu alloy - 35 at.% Ag-25 at.% Cu
Pd-Ce alloy - Alloys with 0-50% Ce
Pd-Ce alloy - Approx. Ce3Pd4
Pd-Ce alloy - Pd rich alloys
Pd-Ce alloy - Pd3Ce
Pd-Dy alloys - Electrolytic etching, chemical etching
Pd-Er alloy - Electrolytic and chemical etching
Pd-Er alloy - Er3Pd4
Pd-Eu alloy - Approx. PdEu
Pd-Ga alloy - Sample preparation with different etching techniques
Pd-Gd alloys (Approx. Gd3Pd4) - Chemical etching
Pd-Gd alloys - Chemical and Electrolytic etching
Pd-Ge system - Pd(x)Ge(1-x), 0.75 <= x =<0.85
Pd-Hf alloys (Approx. 55 at.% Pd) - Chemical etching
Pd-Ho alloys (Approx. Ho3Pd4) - Chemical etching
Pd-Ho alloys - Chemical and electrolytic etching
Pd-Ni alloys - Chemical etching
Pd-Sm alloys - Chemical and electrolytic etching
Pd-U alloys (Up to 25 at.% U) - Chemical etching
Pd-Y alloys - Chemical and electrolytic etching
Pd-Zn system (Pd-45 at.% Zn) - Phsical thinning
Pd-Zn-Ga alloy - PdZn-PdGa pseudo-binary alloys
PdSi and PdSi2 thin films grown on silicon substrates - Chemical etching
Pelleg's electrolytic polishing solution - Niobium - Dislocation etching
Permanent magnet materials - 82Co-6Au-12Fe
Permanent magnet materials - CuNiFe, grain size and structure of the solid-solution alloy
Permanent magnet materials - Vicalloy, general structure
Peroxide etchant (on germanium) - Ge (100) wafers - Chemical etching
Phillip's anodizing solution - Pure Al and Al-Mg alloys - Chemical etching
Phlogophite mica H2KMg3Al(SiO4)3 - Gas drying
Phoschromic etchant - Fe superalloys - Electrolytic etching
Phosphides, sulfides - CdS
Phosphides, sulfides - PbS
Phosphides, sulfides - PuP, PuS
Phosphides, sulfides - UO
Phosphides, sulfides - US
Phospho-picral etchant - Mg and alloys - Chemical etching
Phosphor bronze alloys - Chemical etching
Phosphorus - Chemical etching
Picklesimer's anodizing solution - Nb and alloys - Electrolytic etching
Picklesimer's anodizing solution - Ta and alloys - Electrolytic etching
Picklesimer's anodizing solution - U alloys - Electrolytic etching
Picklesimer's anodizing solution - Zr and alloys - Electrolytic etching
Picklesimer's solution - For Zr, Nb/Sn, Nb/Ti
Picklesimer's solution - Nb-Ti alloy - Anodising
Picklesimer's solution - Nb-Ti alloys
Pickling's anodizing solution - Brass, bronze, and copper alloys - Chemical cleaning
Picral etchant - Carbon and alloy steels - For general structure
Picral etchant - Carbon and alloy steels with medium carbon content - General structure
Picral etchant - Cast iron
Picral etchant - Cast irons - General purpose etching of all pearlitic gray, melleable and ductile cast irons
Picral etchant - Fe, single crystal iron whiskers - Dislocation etching
Picral etchant - Fe-Cr alloys - Chemical etching
Picral etchant - Iron and steels - Chemical etching
Picral etchant - Iron, steels, cast irons - Generally used for iron and heat treated steels
Picral etchant - Pure iron, carbon steels, low-alloy steels, and cast iron
Picral etchant - Steels - Chemical etching
Picral etchant - Steels, high carbon and high alloy types - Chemical etching
Picral etchant - Tin and tin alloys - For etching tin-coated steel and tin-coated cast iron
Picric acid + HCl - Steels - Chemical etching
Piranha - Chemical etching
Plain carbon steel - Chemical etching
Plain carbon steel - Electrolytic polishing
Platinum (Pt) - Pure Pt and Pd, Au alloys
Platinum - Au alloys with less than 90% content of precious metals
Platinum - Chemical polishing
Platinum - Electrolytic lapping
Platinum - Electrolytic polishing
Platinum - Electrolytic polishing
Platinum - Electrolytic polishing
Platinum - Electrolytic polishing
Platinum - Electrolytic thinning
Platinum - Electrolytic thinning by window technique
Platinum - For Au alloys with high content of precious metals
Platinum - Physical etching
Platinum - Pt alloys, Rh, Ir
Platinum - Pt and Pt alloys, Au and Au alloys
Platinum - Pure Au and Au-rich alloys. Pd and Pd alloys
Platinum - Rh base alloys, Pt-10% Rh alloys, Ir alloys, pure Pt and Pt alloys, Ru base alloys
Platinum alloys - Electrolytic etching
Platinum alloys 1 - Electrolytic etching
Platinum alloys 2 - Electrolytic etching
Platinum alloys 3 - Chemical etching
Platinum and platinum alloys - Electrolytic etching
Platinum and related materials - Electrolytic etching
Platinum, Palladium - Attack polishing
Platinum-Iridium (Pt-Ir) - Electric contact material
Platinum-Ruthenium (Pt-Ru) - Electric contact material
Pliskin's etchant - SiO2 thin films deposited on (100) silicon wafers - Chemical etching
Plutonium - Electrolytic etching
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Electrolytic polishing
Plutonium - Pu nad Pu base alloys
Plutonium carbide (PuC) - Electrolytical etching
Plutonium oxide (PuO) - Sample preparation
Plutonium oxide (PuO2) - Chemical etching
Plutonium phosphide
Polisar's etchant - For etch pits on CdTe, CdHgTe, HgTe
Polish - Fairchild's "Magic Polish" - Chemical etching
Polishing aluminum sputtering target - Sample preparation
Poly-Si deposited as silicon-on-insulator structure - Chemical etching
Poly-Si grown on (100) silicon substrates - Chemical etching
Poly-Si material - Chemical etching
Poly-Si material - Chemical polishing
Poly-Si rectangular blocks of silicon - Chemical polishing
Poly-Si wafers - Defects
Poly-Ta rod, sheet, wire - Chemical cleaning
Polyamid (PA) and polyethylene (PE) - Chemical etching
Polycarbonate - Chemical etching
Polycarbonate of styrene, acrylonitrate copolymer - Chemical ecthing
Polycrystalline silicon - Chemical etching
Polyethylene - Reveals lamellar structure - Chemical etching
Polyoxymethylene (POM) - Chemical etching
Polyoxymethylene - Chemical etching
Polyoxymethylene, reveals spherolite cores and growth direction, ploypropylene
Polypropylene (PP) - Chemical etching
Polypropylene (PP) - Chemical etching
Polypropylene - Chemical etching
Polypropylene - Chemical etching
Polypropylene - Spherolites in polyethylene - Chemical etching
Polytetramethylene terephthalate PTMI, Polybutylene terephthalate PBT
Pondo's etchant - Copper
Pondo's etchant - Cu and Cu alloys - Chemical etching
Pondo's etchant - Cu-Sn alloys - Chemical etching
Pondo's etchant - For Cu alloys
Porcelain - Chemical etching
Potash-silica system - Chemical etching
Potash-strontia-niobium oxide system - K2O-SrO-Nb2O5 single crystal
Potassium - Chemical polishing
Potassium - Chemical polishing
Potassium - Chemical polishing
Potassium bromide (KBr) - Dislocation etching
Potassium bromide (KBr)-Potassium chloride mixed crystals - Dislocation etching
Potassium chloride (KCl) - Chemical polishing
Potassium chloride (KCl) - Dislocation etching
Potassium chloride (KCl) - Dislocation etching
Potassium chloride (KCl) - Etch pit etching
Potassium doped lithium carbonate single crystal - Li2O3-1% K2CO3
Poulton's etchant - 6005, 6063 and 6061 Al-Mg-Si alloys - Chemical and electrolytic etching
Pr (0001) wafers - Chemical polishing
Pr specimens - Arc, forming
Pr-Ag alloys - Chemical etching
Pr-Au alloy - Chemical etching
Pr-Pd alloys (Approx. Pr3Pd4) - Chemical etching
PrCo2Si2 single crystals - Chemical etching
Praseodymium - Electrolytic polishing
Praseodymium - Electrolytic polishing
Precipitation hardenable stainless steels - Chemical etching
Precision No. 1 etchant - Ni alloys - Chemical etching
Precision No. 2 etchant - Ni alloys - Chemical etching
Presence of Fe3P in steels - Chemical etching
Presence of SiO2 in Si - Chemical etching
Presence of sigma phase in steel - Electrolytic etching
Primary austenite grain boundaries in low and medium-alloy steels, martensitic and bainitic microstructures - Chemical etching
Pt and Pt alloys with noble metal content bellow 90 - Chemical etching
Pt and Pt alloys, Rh and Rh alloys, Pd-Ag alloys, Ir - Electrolytic etching
Pt and alloys - Chemical etching
Pt and alloys - Electrolytic etching
Pt and alloys - Electrolytic etching
Pt and alloys - Electrolytic etching
Pt and alloys - Electrolytic etching
Pt and alloys - Electrolytic etching
Pt and alloys - Electrolytic etching
Pt as thermocouple wires-paired - Pt and PtRh-Metal, removal
Pt single crystal ingot - Halogen, pasivation
Pt thin film - Acid, float-off
Pt thin films - Chemical etching
Pt-Co alloy - Electrolytic thinning
Pt-Cr alloys - Electrolytic etching
Pt-Pd thin films - Chemical etching
Pt-Sb alloy (PtSb2) - Chemical etching
Pt-Te alloy - No need to etch
Pt-Yb alloys - Chemical etching
Pt2Si thin films formed on silicon, (111) and (100) n-type wafers - Metal deposition
PtAs2 single crystal specimens - Chemical polishing
PtH powder - Chemical cleaning
PtO crystalline thin films - Chemical etching
PtP2 single crystal specimens - Chemical polishing
PtSb2 (100) wafers - Chemical etching
PtSb2 (100), (110) and (111) wafers - Chemical etching
PtSb2 (100), (110) and (111) wafers - Chemical etching
PtSb2 (100), (110) and (111) wafers - Chemical etching
PtSb2 (100), (110) and (111) wafers - Chemical etching
PtSb2 (100), (110) and (111) wafers - Chemical etching
PtSb2 (100), (111) and (110) wafers - Chemical etching
PtSb2 - Dislocation etching
PtSb2 single crystal specimens - Chemical polishing
PtSi specimens - Chemical etching
PtSi thin films deposited on silicon-Ionized gas etching
PtSi thin films grown on silicon substrates - Chemical etching
Pu alloys - Electrolytic etching
Pu specimens - Electrolytic polishing
Pu-Al alloys - Electrolytic polishing
Pu-Al and Pu-Ga alloys - Electrolytic etching
Pu-C alloys - Chemical etching
Pu-Cd alloy - May be examined in the polished unetched state
Pu-Ce alloys - Chemical and electrolytical etching
Pu-Ce-Co alloys - Electrolytic etching
Pu-Ce-Co system - Electrolytic etching
Pu-Fe-C alloy - Final electrolytic polishing
Pu-Ga alloy (1 wt.% Ga) - Chemical etching
Pu-Ga alloy (1 wt.% Ga) - Electrolytic etching
Pu-Ga alloys - Electrolytic etching
Pu-In alloys - Electrolytic etching
Pu-La system - Chemical etching
Pu-Pd alloys (Approx. Pu3Pd4) - Chemical etching
Pu-Zn alloy - Electrolytic and chemical etching
Pu-Zn alloys (Zn rich) - Chemical etching
PuC - Electrolytic etching
PuC - Electrolytic etching
PuO2 - Chemical etching
PuO2 - Chemical etching
PuO2 - Chemical etching
PuP, PuS - Chemical etching
Pure Ag - Electrolytic etching
Pure Ag and Ag alloys - Chemical etching
Pure Ag and Ag alloys - Chemical etching
Pure Ag and some alloys - Chemical etching
Pure Ag, Ag-Cu and Ag alloys - Electrolytic etching
Pure Ag, Ag-Ni alloys, Ag-Pd alloys
Pure Al - Chemical etching
Pure Al, Al-1% Si-1% Fe-0.1% Cu alloy - Chemical polishing
Pure Al, Al-Cu, Al-Mg amd Al-Mg-Si alloys - Chemical etching
Pure Al, Al-Cu, Al-Mg, and Al-Mg-Si alloys - Electrolytic etching
Pure Al, Al-Mg and Al-Mg-Si alloys - Chemical etching
Pure Al, Cu-Al, Mg-Al, Mg-Si-Al, and Zn-Al alloys - Chemical etching
Pure Al2O3, Al2O3 with MgO, Al2O3 with additives CaO, MgO, SiO2, Na2O - Physical etching
Pure Au - Electrolytic etching
Pure Au and Au-rich alloys - Chemical etching
Pure Au and alloys - Chemical etching
Pure Au and alloys - Chemical etching
Pure Be, etch pits - Chemical etching
Pure Be, grain boundaries, impurities, single crystals - Chemical etching
Pure Bi - Electrolytic etching
Pure Co, color etchant - Chemical etching
Pure Copper - Electrolytic polishing
Pure Cu - Electrolytic etching
Pure Cu and Cu-5% Be, Cu-1% Zr, Cu-0.3% Be-2% Ni alloys - Potentiostatic etching
Pure Cu with/without oxide and sulfide inclusions - Chemical etching
Pure Cu, Cu-0.5% Be, Cu-1% Zr, Cu-0.3% Be-2% Ni alloys - Potentiostatic etching
Pure Cu, brasses, Al bronzes, Cu-Ni and Cu-Ag alloys, Alpaca - Chemical etching
Pure Cu, brasses, Alpaca, bronzes, grain boundary etchant - Chemical etching
Pure Fe - Chemical polishing
Pure Gd, for most RE metals and their alloys, Sm-Co alloys - Chemical ecthing
Pure Ge and Ge alloys - Electrolytic etching
Pure Ge, Te, and Se, tellurides, selenides, and Zr silicides - Chemical etching
Pure In - Electrolytic etching
Pure Mg and Mg-rich alloys - Electrolytic etching
Pure Mg and alloys - Chemical etching
Pure Mg and alloys - Chemical etching
Pure Mn and lean alloys - Chemical etching
Pure Molybdenum - EBSD sample preparation
Pure Nb - Electrolytic etching
Pure Ni - Chemical etching
Pure Ni - Chemical polishing
Pure Ni, Ni-Co alloys - Chemical polishing
Pure Ni, Ni-Zn-Ag, Ni-Ag, Ni-Cu and Ni-Al-Mo alloys - Chemical etching
Pure Ni, superalloys, Ni-Cr and Ni-Fe alloys - Chemical etching
Pure Pb - Chemical etching
Pure Pb - Chemical polishing
Pure Pb, Pb alloys - Chemical polishing
Pure Pb, Pb-Ca alloys, Pb with less than 2% Sb - Chemical etching
Pure Pb, Pb-Ca and Pb-Cu alloys - Chemical etching
Pure Pb, Pb-Na alloys - Chemical etching
Pure Pb, Pb-Sn and Pb-Ca alloys - Chemical etching
Pure Pd - Chemical etching
Pure Pt - Chemical etching
Pure Pt - Chemical etching
Pure Pt and Pd, Au alloys
Pure Pt and Pt alloys, Rh-base alloys, Pt-10Rh alloys, Pt-Ir alloys, Ru-base alloys - Electrolytic etching
Pure Pt and Pt with alloy content Rh, Ru, Ir, and Os - Chemical etching
Pure Pu and Pu alloys - Electrolytic etching
Pure Ru - Electrolytic etching
Pure Si and Ge and their alloys, InSb, etch figures of the (111) plane, etches p-n transitions - Chemical etching
Pure Si in Ge and their alloys - Chemical etching
Pure Si, pure Te, pure Se - Chemical etching
Pure Sn - Electrolytic etching
Pure Sn and alloys - Chemical etching
Pure Sn and alloys - Chemical etching
Pure Sn and alloys of Sn and 1% Pb - Chemical etching
Pure Sn, Sn with 1% Pb - Chemical etching
Pure Sn, Sn-Bi alloys - Chemical etching
Pure Te - Chemical etching
Pure Te - Chemical etching
Pure Th and Th alloys - Chemical etching
Pure Ti - Electrolytic etching
Pure Ti - Electrolytic etching
Pure Ti and Ti alloys - Physical etching
Pure Ti and Ti alloys, grain-boundary etchant - Chemical etching
Pure Ti and alloys - Electrolytic etching
Pure Ti and alloys - Electrolytic etching
Pure Ti and alloys - Electrolytic etching
Pure Ti, Ti-base alloys - Electrolytic etching
Pure Ti, alpha Ti, Ti-Al-V-Sn alloys, ferro titanium - Chemical etching
Pure U and U alloys - Chemical etching
Pure U, pure Th - Electrolytic etching
Pure V, V-Al, V-Ga, V-In, V-Si alloy - Anodizing
Pure W (tungsten) - Chemical etching
Pure Zinc - Electrolytic polishing
Pure Zn and Zn-Co and Zn-Cu alloys - Chemical etching
Pure Zn and lean alloys - Electrolytic etching
Pure Zn, Zn-Cu alloys - Chemical etching
Pure Zr - Electrolytic polishing
Pure Zr - Electrolytic polishing
Pure Zr, Zr-U alloys - Chemical etching
Pure Zr, pure Hf, grain constrast - Anodizing
Pure alumina (Al2O3) - Chemical etching
Pure alumina (Al2O3) - Physical etching
Pure cobalt - Electrolytic etching
Pure cobalt - For electron microscopy
Pure copper - Electrolytic polishing
Pure iron - Electrolytic polishing
Pure iron, nitrided with less than 0.015% C - Electrolytic polishing
Pure iron, nitrided with less than 0.015% C - Electrolytic polishing
Pure iron, nitrided with less than 0.015% C - Electrolytic polishing
Pure platinum - Electrolytic etching
Pure tantalum - Polishing
Pure vanadium - Chemical etching
Pure vanadium - Chemical etching
Pure vanadium - Electrolytic etching
Pure vanadium - Electrolytic etching
Pure zinc specimens - Electrolytic polishing
Pyrex blanks - Acid float-off
Pyrex glass beaker - Chemical etching
Pyrolytic SiC - Electrolytic etching
Pyrolytic graphite - Attack polishing
Pyrolytic graphite - Attack polishing
Pyromet 860 alloy - Fe-43Ni-12.6Cr-6Mo-4Co-3Ti-1.25Al (+B)
Pyrophyllite (Al2Si4O10 x (OH)2)
Quenched and tempered steels - Chemical etching
R etchant - For Ti/Al, Ti/Zr
R or A etchant - Ti-Zr alloys - Chemical etching
R-etchant - Ti-Al and Ti-Al-Zr alloys - Chemical etching
R.C. etchant
R.R.E. etchant - For InP, InPAs, GeInPAs
R5In2 grown as single crystals - Chemical etching
RC-1 etchant - GaAs (111) wafers - Dislocation etching
RCA etchant (AB) - SiO2 alpha-quartz frequency crystals - Chemical cleaning
RCA etchant - Si wafers of all major plane orientations - Chemical cleaning
RE metals - Chemical etching
RE metals - Chemical etching
RE metals - Chemical etching
RE metals - Chemical etching
RE metals and alloys - Chemical etching
RE metals, Gd, Er, Ho and Dy - Chemical etching
RE-Co alloys - Chemical etching
RE-Mg alloys - Chemical etching
RIE etchant - TiW thin films - Ionized gas etching
RJFe2 as rare earth ferrites - Chemical etching
RNi6B2 specimens - Chemical etching
Ralph?s etchant - Stainless steel - Chemical etching
Rare earth (RHE) metals and alloys - Chemical etching
Rare earth (RHE) metals and alloys - Chemical etching
Rare earth - Chemical-mechanical polishing
Rare earth - Chemical-mechanical polishing
Rare earth - Chemical-mechanical polishing
Rare earth - Electrolytic polishing and anodozing
Rare earth - Electrolytic polishing and anodozing
Rare earths (Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sm, Sc, Tb, Tm, Yb, Y) - Sample preparation procedure
Rare earths - Electrolytic polishing and etching
Rb metal - Chemical etching
Rb-Fe-F system (RbFeF3 single crystal) - Chemical etching
RbBr (001) wafers - Chemical polishing
RbFeF3 - Dislocation etching
RbI (001) wafers - Chemical polishing
Re (0001) wafers - Chemical etching
Re (0001) wafers - Electrolytic polishing
Re (0001) wafers - Electrolytic thinning
Re - Electrolytic lapping
Re silicides - Chemical etching
Re specimens
Re specimens - Acid oxidation
Re specimens - Chemical etching
Re specimens - Gas oxidation
Re specimens - Molten flux etching
Re, Mo, W alloy - Electrolytic lapping
Re-Hf (<10% Hf) alloys - Chemical etching
Re-Hf alloy - Sample preparation procedure
Re-Hf alloys - Attack polishing
Re-Si system - Chemical etching
Re-W alloys - Electromechanical polishing
Recipe for Au on C and Al/W dendrites
Red brass specimens - Electrolytic etching
Refactaly 26 - Chemical etching - General microstructure
Refractaloy steel - Chemical etching
Refractaloy steel - Chemical etching
Refractaloy steels 80, 90, 100 - Chemical etching
Refractaly - Chemical etching
Rehenium - Electromechanical polishing
Remington A etchant - Ti alloys - Chemical etching
Remington B etchant - Titanium - Chemical etching
Remington's A etchant (Finlay's A etchant) - For Ti alloys
Rene 125 alloy - Ni-10Co-8.9Cr-7.0W-4.75AL-3.8Ta-2.5Ti-2.0Mo-1.5Hf-0.11C (+ 0.05Zr, 0.01B)
Rene 80 alloy - Chemical etching
Rene 80 alloy - Ni-14Cr-4Mo-5Ti-3Al-9Co-4W-0.2C (+ Zr, B)
Rene 95 alloy - 62.2Ni-12.8Cr-8.0Co-3.6Al-3.7Mo-3.5Nb-3.5W-2.6Ti-0.8C by weight
Rene 95 alloy - Ni-01.6C-14Cr-8Co-3.5Mo-2.5W-2.5Ti-3.4Al-3.6Nb
Rene 95 alloy powder - Chemical etching
Rene 95 nickel alloy - Chemical etching
Retained austenite etchant I - Steels - Chemical etching
Retained austenite etchant II - Steels - Chemical etching
Retained austenite etchant III - Steels - Chemical etching
Retained austenite etchant IV - Steels - Chemical etching
Retained austenite in the steels V
Reveals coring in foundry alloys, welds, color etchant - Chemical etching
Rh - Electrolytic etching
Rh alloys - Electrolytic etching
Rh and alloys - Electrolytic etching
Rh-W alloys - Electrolytic etching
Rhenium - Attack polishing
Rhenium - Chemical etching
Rhenium - Chemical etching
Rhenium - Chemical etching
Rhenium - Chemical etching
Rhenium - Cr, Mo, Mo-Cr alloys (up to 80% Cr), Mo-Fe alloys
Rhenium - Electrolytic etching
Rhenium - Electrolytic etching
Rhenium - Electrolytic polishing
Rhenium - Electrolytic polishing
Rhenium - Electrolytic polishing
Rhenium - Electrolytic polishing
Rhenium - Electrolytic polishing
Rhenium - Electrolytic thinning by jet etch
Rhenium - Electrolytic etching
Rhodium - Electrolytic etching
Rhodium - Rh base alloys, Pt-10% Rh alloys
Rhodium and Gold Plated Nickel-Iron (Rh, Au, Ni-Fe) - Electric contact material
Rhodium and Gold plated Nickel-Iron (Rh, Au, Ni-Fe) - Electric contact material
Rhodium specimens - Electrolytic etching
Rhodium specimens - Electrolytic polishing
Rhodium specimens - Pt alloys, Rh, Ir
Rhodium specimens - Pure Au and Pd. Au-Pd, Pd alloys with more than 90% concentration of precious metals
Richard-Crocker's RC etchant - Gallium phosphide (GaP) - Chemical polishing
Richard-Crocker's etchant
Rolls Royce's etchant - Stainless steel - Chemical etching
Roman's etchant - Er, Dy, Gd, Ho, La - Chemical polishing
Roman's etchant - For R.E. alloys
Roman's etchant - Pr-Au alloy - Chemical etching
Roman's etchant - Pr-Ba alloys - Chemical etching
Roman's etchant - Pr-Bi alloys - Chemical etching
Roman's etchant - Pr-Cs alloys - Chemical etching
Roman's etchant - Pr-Hf alloys - Chemical etching
Roman's etchant - Pr-Hg alloys - Chemical etching
Roman's etchant - Pr-Ir alloy
Roman's etchant - Pr-Ir alloy - Chemical etching
Roman's etchant - Pr-Pt alloys - Chemical etching
Roman's etchant - Pr-Re alloys - Chemical etching
Roman's etchant - Pr-Ta alloys - Chemical etching
Roman's etchant - Pr-Tl alloys - Chemical etching
Roman's etchant - Pr-W alloys - Chemical etching
Romans's etchant - Praseodymium-lead alloys (Pr-Pb) - Chemical etching
Romans's etchant - Praseodymium-osmium alloys (Pr-Os) - Chemical etching
Rosenhain's etchant - Co-Sn alloys - Chemical etching
Rowland's etchant - Etchants for galvannealed steels
Ru (100) wafers - Ionized gas cleaning
Ru alloys - Electrolytic etching
Ru, Rh, Ir, Os - Attack polishing
Ru-Mo alloys - Electrolytic etching
RuS2 single crystal specimens - Chemical polishing
RuSe2 single crystal specimens - Chemical polishing
RuTe2 single crystal specimens - Chemical polishing
Rubber-reinforced plastics - Chemical etching
Ruthenium - Electrolytic etching
Ruthenium - Electromechanical polishing
Ruthenium - Ru rich alloys and Ru-Mo alloys
Ruthenium specimens - Electrolytic polishing
Ruthenium specimens - Electrolytic thinning
Ruthenium specimens - Sample preparation procedure
Rutile single crystal (TiO2) - Chemical polishing
S (001) wafers - Chemical etching
S (100) wafers - Chemical etching
S (Slow) etchant - Silicon - Chemical etching
S specimens - Sovent etching
S-816 Modified with B - Chemical etching
SAE 4340 steel - Fe-0.4C-0.7Mn-0.26Si-0.75Cr-0.25Mo-1.8Ni
SM-200 nickel alloy - Chemical etching
SR4 etchant - Ge (111) wafers - Chemical polishing/etching
SR4 etchant - Si (111) wafers used in a study of the variations in surface conductivity of silicon and Germanium
SSA etchant - GaAs wafers - Electrolytic etching
SST 300 series - Electrolytic etching
SST 304 steel - Electrolytic etching
SST 316 steel - Chemical etching
SST substrates used for deposition of WC - Chemical cleaning
SST tubing - Chemical cleaning
SSiC - Chemical etching
SSiC Beta/Beta - Chemical etching
SSiC doped with Al - Chemical etching
SSiC doped with B - Chemical etching
Samarium doped barium titanate - Chemical etching
Samarium oxide-zirconia system (Sm2O3-ZrO2 eutectic) - Chemical etching
Samarium specimens - Electrolytic polishing
Samarium specimens - Electrolytic polishing
Samarium-terbium orthoferrite (Sm0.35 x Tb0.43 x FeO3) - Chemical polishing
Samarium-zinc system (Sm-Zn) - Electrolytic polishing and chemical etching
Sandwich-type composite steel - Foamed aluminium-steel
Sb (0001) wafers - Chemical etching
Sb (0001) wafers cleaved under LN2 - Chemical polishing
Sb (0001) wafers cleaved under LN2 - Chemical polishing
Sb (0001) wafers cleaved under LN2 - Cleave
Sb and Bi alloys - Chemical etching
Sb and Sb alloys - Chemical etching
Sb and Sb alloys - Chemical etching
Sb and Sb alloys, Pb-Sb, Bi-Sn and Bi-Cd alloys - Chemical etching
Sb single crystal wafers - Chemical polishing
Sb, Bi and alloys - Chemical etching
Sb-Ge eutectic - Chemical etching
Sb-Pb alloys - Chemical etching
Sb-Pb, Bi-Sn and Bi-Cd alloys - Chemical etching
Sb-Pb-Te alloys (PbTe-Sb2Te3 section) - Chemical etching
Sb-Pb-Te alloys (Sb and Pb rich) - Chemical etching
Sb-Te system (Sb2Te(3-x)) - Chemical etching
Sb-Tl-Te alloys (Te rich section) - Chemical etching
SbTe and BiTe, detection of Te, InP - Chemical etching
Sc (0001) wafers - Chemical polishing
Sc (0001) wafers - Chemical polishing
Sc polycrystallinc rod - Chemical etching
Sc powder - Chemical etching
Sc-Ag alloys - Chemical etching
Sc-Ag alloys
Sc-Mg system - Alloys with 0-60 at.% Sc - 2% Nital
Sc-Ti alloys - Chemical etching
Sc-Ti alloys - Chemical etching
ScD as thin films - Chemical etching
Scale dip etchant - Cu and Cu alloys - Chemical cleaning
Scandium - Chemical etching
Scandium - Chemical etching
Scandium - Chemical polishing
Scandium - Electrolytic polishing
Scandium doped barium titanate - Thermal and chemical etching
Schell's etchant
Schell's etchant - GaAs (111) wafers - Chemical etching
Schimmel's etch technique - Chemical etching
Schimmel's etchant
Schimmel's etchant - Si (111) and (100) wafers used as substrates for silicon epitaxy growth - Chemical etching
Schimmel's etchant - Silicon - Chemical etching
Schrader's modification of Vilella's etchant - High alloy steels - Chemical etching
Schramm's etchant - Zn-Cu, Zn-Fe, Zn-Mg, Zn-Ni, and Zn-Pb alloys
Schumann's etchant
Schumann's etchant - Fe-Mn alloys - Chemical etching
Schumann's etchant - Mn-Ti-Fe system - Fe-19-27% Mn - up to 1.45% Ti
Scimmel's etchant - Silicon - Defects in epi layers on <100> silicon
Se and Te - Chemical etching
Se and ZnTe - Chemical etching
Se deposits remaining on the (TTT)B surface of HgSe wafers - Chemical etching
Se residual film left on CdSe polycrystalline thin films - Chemical etching
Se single crystal specimens - Chemical etching
Se single crystal specimens - Chemical etching
Se single crystal specimens - Chemical etching
Se single crystal wafers - Chemical etching
Se single crystal wafers - Chemical etching
Se thin films - Acid, float-off
Se, Ge and their alloys, GaSb and InSb, dislocations on the (100) and (111) crystal planes of Si, InAs - Chemical etching
Se, Ge, and their alloys, InAs, InSb, InP, AlSb, GaAs, GaSb, ZnTe, and CdTe - Chemical etching
Se, Te, selenides, tellurides - Chemical etching
Se-bismuth selenide - Chemical etching
Secco's etchant - Dislocation etching
Secco's etchant - For etch pits on Si (100)
Secco's etchant - Si (111) and (100), p-type, 1-10,000 Ohm cm resistivity wafers - Chemical etching
Seeco's etchant - SiO2 thin films grown on silicon, (100), n-type substrates - Chemical etching
Segregation in speralloys - Chemical and elctrolytic etching
Selective etching of delta-ferrite in 18-8 austenitic stainless steels
Selenium - Electrolytic polishing
Selenium - Ge, Te, Se, telurides, selenides and Zr silicide
Selenium - Si, Te, Se
Self-bonded SiC - Electrolytic etching
Shakudo-Sterling silver bimetal-10% Shakudo (4% gold, 96% copper), 90% Sterling silver
Shape memory alloys - Chemical etching
Si (100) and (110) wafers - Chemical etching
Si (100) and (111) wafers - Acid passivation
Si (100) and (111) wafers - Acid, float-off
Si (100) and (111) wafers both n- and p-type - Chemical thinning
Si (100) and (111) wafers used in a study of carbon and oxygen contamination - Chemical etching
Si (100) and (111) wafers, n-type, 10-30 Ohm cm resistivity - Chemical etching
Si (100) and GaAs (100) wafers - Chemical cleaning
Si (100) as-doped, 10 Ohm cm resistivity wafers - Chemical cleaning
Si (100) n-type 3-6 Ohm cm resistivity wafers - Ionized gas etching
Si (100) n-type wafer - Chemical etching
Si (100) n-type wafer used as substrate - Chemical etching
Si (100) n-type wafers - Colloid replication
Si (100) n-type wafers with a p+ Si epitaxy buffer layer - Chemical conditioning
Si (100) n-type wafers, 10 Ohm cm resistivity - Chemical etching
Si (100) n-type, 2-5 Ohm cm resistivity wafers - Chemical etching
Si (100) p- and n-type substrates - Chemical etching
Si (100) p-type wafers - Dislocation etching - Secco's etchant, modified
Si (100) p-type wafers with SiO2 films - Ionized gas etching
Si (100) p-type wafers, 1.2-1.8 Ohm cm resistivity - Chemical cleaning
Si (100) p-type, 4-6 Ohm cm resistivity wafers - Chemical etching
Si (100) wafers - Chemical cleaning
Si (100) wafers - Chemical cleaning
Si (100) wafers - Chemical cleaning
Si (100) wafers - Chemical etching
Si (100) wafers - Chemical etching
Si (100) wafers - Chemical etching
Si (100) wafers - Chemical jet thinning
Si (100) wafers - Chemical thinning
Si (100) wafers - Chemical thinning
Si (100) wafers - Physical etching
Si (100) wafers - Ionized gas etching
Si (100) wafers - Ionized gas etching
Si (100) wafers - Thermal oxidation
Si (100) wafers 100 mm thick - Chemical etching
Si (100) wafers and other orientations - Abrasive polishing
Si (100) wafers and other orientations - Abrasive polishing
Si (100) wafers unpassivated surfaces or with SiO2 or TaSi2 thin films - Chemical cleaning
Si (100) wafers used as substrates - Chemical etching
Si (100) wafers used as substrates for RF sputter of SeGe thin films - Chemical etching
Si (100) wafers used as substrates for epitaxy growth - Chemical etching
Si (100) wafers used as substrates for epitaxy growth - Gas cleaning
Si (100) wafers used as substrates in a study of oxide and nitride - Chemical etching
Si (100) wafers used as substrates with an SiO2 thin film - Physical etching
Si (100) wafers used as substrates with p-doped and undoped poly - Si and SiO2 thin films - Ionized gas etching
Si (100) wafers used for MOCVD growth of SiO2 thin films - Chemical cleaning
Si (100) wafers used in an anisotropic etch study - Chemical etching
Si (100) wafers used in developing the Secco's etchant - Chemical polishing
Si (100) wafers with SiO2 thin films - Ionized gas etching
Si (100) wafers with thermal SiO2 thin films - Ionized gas etching
Si (100) wafers, n-type - Chemical polishing/etching
Si (100) wafers, n-type, 10-30 Ohm cm resistivity - Chemical etching
Si (100) wafers, p-type, 2 Ohm cm resistivity - Chemical thinning
Si (100), n- and p-type wafers, 20 and 25 Ohm cm resistivity - Chemical cleaning
Si (100), n-type, 3-6 Ohm cm resistivity wafers - Chemical etching
Si (100), n-type, 4-7 Ohm cm resistivity wafers - Chemical cleaning
Si (100), n-type, 5-9 Ohm cm resistivity wafers - Chemical cleaning
Si (100), n-type, 5-9 Ohm cm resistivity wafers - Chemical cleaning
Si (100), p- and n-type wafers, 1-10 Ohm cm resistivity - Chemical etching
Si (100), p-type, 2 Ohm cm resistivity wafers - Chemical cleaning
Si (110) wafers with a thermally grown SiO2 thin film - Chemical etching
Si (110), (112), and (113) wafers for p-p+ epitaxy - Chemical cleaning
Si (111) 10-20 Ohm cm resistivity, n-type wafers - Chemical etching
Si (111) and (100) n- and p-type wafers - Chemical jet polishing
Si (111) and (100) wafers - Chemical cleaning
Si (111) and (100) wafers - Chemical etching
Si (111) and (100) wafers - Electrolytic oxidation
Si (111) and (100) wafers and ingots - Alkali, orientation
Si (111) and (100) wafers and spheres - Chemical etching
Si (111) and (100) wafers used as substrates for silicon MBE thin film epitaxy growth - Chemical etching
Si (111) and (100) wafers used in a study of defects - Powder, defect ehnancement
Si (111) and (100) wafers, both n- and p-type - Electrolytic etching
Si (111) and (100) wafers, n-type 10-30 Ohm cm resistivity - Chemical etching
Si (111) and (100) wafers, n-type, 10-30 Ohm cm resistivity - Chemical etching
Si (111) and (100) wafers, p- and n-type of varied resistivity - Electrolytic oxidation
Si (111) and (100) wafers, p- and n-type, 0.2-20 Ohm cm resistivity - Chemical cleaning
Si (111) and (110) wafers - Chemical etching
Si (111) and (110) wafers cut from CZ grown ingots - Chemical etching
Si (111) dendritic-web ribbon crystal - Chemical thinning
Si (111) n- and p-type - Chemical etching
Si (111) n- and p-type wafers - Chemical cleaning
Si (111) n-type 3-5 Ohm cm resistivily wafers - Chemical etching
Si (111) n-type wafers - Chemical polishing
Si (111) n-type wafers - Electrolytic jet polishing
Si (111) n-type wafers - Electrolytic jet polishing
Si (111) n-type wafers - Electrolytic jet polishing
Si (111) n-type wafers 5 Ohm cm resistivity - Thermal cleaning
Si (111) n-type wafers with boron diffused p-n junctions - Chemical etching
Si (111) n-type wafers with diffused p-type layers - Chemical etching
Si (111) n-type wafers with p-n junctions - Chemical junction etching
Si (111) n-type wafers, 1.63 Ohm cm resistivity - Chemical cleaning
Si (111) n-type wafers, 130 Ohm cm resistivity - Chemical polishing
Si (111) n-type wafers, 15-20 Ohm cm resistivity - Chemical etching
Si (111) n-type wafers, 5-120 Ohm cm resistivity - Acid forming
Si (111) n-type wafers, 5-120 Ohm cm resistivity - Dislocation etching
Si (111) n-type wafers, 5-50 Ohm cm resistivity - Acid forming
Si (111) n-type wafers, 50-500 Ohm cm resistivity - Chemical polishing
Si (111) n-type, 1.5-2.5 Ohm cm resistivity wafers - Chemical etching
Si (111) p- and n-type wafers, 8 Ohm cm resistivity - Chemical etching
Si (111) p- and n-type, 20 and 25 Ohm cm resistivity wafers - Chemical cleaning
Si (111) p-type 2-10 Ohm cm resistivity wafers - Gas oxidation
Si (111) p-type wafers - Chemical cleaning
Si (111) p-type wafers, 7-21 Ohm cm resistivity - Chemical cleaning
Si (111) pre-cut bars of material - Chemical polishing
Si (111) wafer and other orientations - Chemical etching
Si (111) wafer substrates used for epitaxy growth of GaP - Chemical cleaning
Si (111) wafers
Si (111) wafers - Chemical cleaning
Si (111) wafers - Chemical cleaning
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching
Si (111) wafers - Chemical etching - Sirtl's etchant modified
Si (111) wafers - Chemical polishing
Si (111) wafers - Chemical polishing
Si (111) wafers - Chemical polishing
Si (111) wafers - Chemical polishing
Si (111) wafers - Chemical polishing
Si (111) wafers - Chemical polishing/thinning
Si (111) wafers - Dislocation etching
Si (111) wafers - Abrasive polishing
Si (111) wafers - Acid, pinhole, jet
Si (111) wafers - Gas etching
Si (111) wafers - Metal decoration
Si (111) wafers - Metal, dislocation
Si (111) wafers - Physical etching
Si (111) wafers and other orientations - Abrasive polishing
Si (111) wafers and other orientations - Chemical ecthing
Si (111) wafers and other orientations - Chemical etching
Si (111) wafers and other orientations - Chemical etching
Si (111) wafers and other orientations - Chemical etching
Si (111) wafers and other orientations - Chemical polishing
Si (111) wafers and other orientations - Chemical polishing
Si (111) wafers and other orientations - Chemical polishing/etching
Si (111) wafers and other orientations - Chemical polishing/thinning
Si (111) wafers and other orientations - Si (111) wafers and other orientations
Si (111) wafers and other orientations with n- and p-type resistivity - Chemical polishing
Si (111) wafers and whiskers - Gas etching
Si (111) wafers both p- and n-type - Electrolytic polishing
Si (111) wafers fabricated as barrier diodes - Chemical etching
Si (111) wafers used as substrate for deposition of a-C - Chemical cleaning
Si (111) wafers used as substrates for epitaxy growth of silicon - Chemical polishing
Si (111) wafers used as substrates for epitaxy growth of silicon - Chemical thinning
Si (111) wafers used in a defect study - Chemical etching
Si (111) wafers used in a defect study - Chemical etching
Si (111) wafers used in a defect study - Electrolytic etching/polishing
Si (111) wafers used in a study of Ag and Fe ion contamination - Chemical polishing
Si (111) wafers used in a study of electrolytic polishing with HF - Electrolytic polishing
Si (111) wafers used in a study of light induced plasticity - Chemical etching
Si (111) wafers used in a study of selenium adsorption - Chemical cleaning
Si (111) wafers used in a study of stacking fault energy - Chemical thinning
Si (111) wafers with diffused n-p-n junctions - Electrolytic junction etching
Si (111) wafers with high boron doping - Chemical cleaning
Si (111) wafers with n+/n diffusion - Chemical etching
Si (111) wafers with p-n junctions - Chemical junction etching
Si (111) wafers, 5-50 Ohm cm resistivity, n-type - Chemical polishing
Si (111) wafers, boron diffused p-type - Chemical etching
Si (111) wafers, n-type, 5-10 Ohm cm resistivity - Chemical polishing
Si (111) wafers, n-type, used to fabricate diffused p-n-p transistors - Chemical polishing
Si (111) wafers, p- and n-type - Chemical etching
Si (111) wafers, p-type - Chemical etching
Si (111) wafers, p-type, 7-21 Ohm cm resistivity - Chemical jet thinning
Si (111) web-dendritic ribbon crystal silicon - Chemical thinning
Si (111), (100) and (110) wafers - Chemical polishing
Si (111), (100) and (110) wafers - Thermal etching
Si (111), (100) and (110) wafers and a 1 cm diameter sphere - Chemical etching
Si (111), (100) and (110) wafers, n-type 0.1-0.7 Ohm cm and p-type 0.4-3 Ohm cm resistivity - Ionized gas thinning
Si (111), (100) wafers - Chemical polishing/thinning
Si (111), (100) wafers as substrates for deposition of Si3N4 - Chemical etching
Si (111), (100) wafers n-type 10-30 Ohm cm resistivity - Chemical etching
Si (111), (100), (112) and (110) oriented wafers - Chemical polishing
Si (111), (100), and (110) wafers and ingots - Chemical etching
Si (111), (100), n- and p-type wafers - Chemical polishing
Si (111), n-type and (110), p-type wafers - Chemical etching
Si (111), n-type, 1-10 Ohm cm resistivity wafers - Chemical etching
Si (111), n-type, 10-15 Ohm cm resistivity wafers - Chemical polishing
Si (111), n-type, 3-5 Ohm cm resistivity wafers - Chemical cleaning
Si (111), p- and n-type wafers - Chemical etching
Si (111), p-type (intrinsic) and doped (extrinsic) wafers - Chemical cleaning
Si (111), p-type wafers used as substrates for tungsten deposition - Chemical cleaning
Si (111), p-type wafers, 0.1-200 Ohm cm resistivity - Chemical polishing
Si and Ge (111) wafers and other orientations - Chemical polishing
Si and Ge wafers - Chemical polishing
Si and Ge wafers - Electrolytic cleaning
Si and SiO(x)N(y) DC sputtered thin films on (111) silicon wafers - Chemical etching
Si and alloys - Chemical etching
Si and alloys - Chemical etching
Si as 15 mm square cut and oriented cubes (100) - Neutron damage
Si as a pre-cut single cystal octahedron, (111) form - Chemical etching
Si as p+-n solar cells - Chemical cleaning
Si as poly-Si films on Si (100) substrates - Electrolytic decoration
Si as poly-Si specimens - Ionized gas etching
Si as poly-Si thin film on silicon wafers - Ionizde gas structuring
Si as poly-Si thin films - Chemical etching
Si as various cut shaped specimens - Chemical etching
Si ingot FZ grown, n-type, 200 Ohm cm resistivity - Dislocation etching
Si ingot etched for defects - Chemical etching
Si n- and p-type wafers - Electrolytic polishing
Si p-n junction wafers - Chemical etching
Si p-n-p transistors - Acid junction cleaning
Si p-n-p transistors - Acid junction cleaning
Si p-type wafers - Chemical etching
Si p-type wafers - Electrolytic polishing
Si poly-Si epitaxy deposited thin films - Chemical cleaning
Si polycrystalline material - Chemical etching
Si polycrystalline spheres - Drop forming
Si single crystal hemispheres - Chemical etching
Si single crystal spheres - Chemical ecthing
Si single crystal spheres - Chemical etching
Si single crystal spheres - Chemical etching
Si single crystal spheres - Chemical etching
Si single crystal spheres - Chemical polishing
Si single crystal spheres - Sample preparation
Si single crystal spheres - Si single crystal spheres
Si single crystal spheres 1/2" diameter - Chemical polishing
Si single crystal spheres From 1/8 to 1/2" in diameter - Sample preparation
Si single crystal spheres, p- and n-type - Sample preparation
Si single crystal wafers - Chemical etching
Si single-crystal or poly-crystalline wafer - Chemical etching
Si specimens - Chemical polishing
Si steel - Fe-0.6C-2.0Si
Si steel - Jet electrolytic polishing
Si steels - Silicon steel with high silicon content
Si substrates used for deposition of a-SiH - Chemical etching
Si thin film deposition on germanium substrates - Chemical etching
Si wafers - Chemical cleaning
Si wafers - Chemical cleaning
Si wafers - Chemical etching
Si wafers - Chemical etching
Si wafers - Chemical etching
Si wafers - Chemical polishing
Si wafers - Electrolytic polishing
Si wafers - Electrolytic polishing
Si wafers - Gas etching
Si wafers - Ionized gas, structure
Si wafers - Surface treatment
Si wafers - Surface treatment
Si wafers - Surface treatment
Si wafers and other orientations - Chemical polishing
Si wafers of different orientations - Chemical etching
Si wafers of different orientations - Electrolytic polishing
Si wafers of various orientations - Chemical etching
Si wafers of various orientations - Ionized gas etching
Si wafers used as substrates for growth of silicides - Ionized gas etching
Si wafers used as substrates for silicon epitaxy as Si/Si - Gas contamination
Si wafers with p-n junctions - Chemical etching
Si wafers with p-n junctions - Chemical junction etching
Si(100) wafers - Ionized gas etching
Si-Al-Mg-Ti glass - 65SiO2-19Al2O3-9MgO-6.5TiO2
Si-as system (SiAs) - Etching for defects
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Chemical etching
Si3N4 - Physical etching
Si3N4 - Thermal etching
Si3N4 amorphous thin films - Chemical ecthing
Si3N4 and oxynitride thin films - Chemical cleaning
Si3N4 and oxynitride thin films on silicon - Chemical etching
Si3N4 and oxynitride thin films on silicon - Chemical etching
Si3N4 and oxynitrides as DC sputtered thin film deposits on (111) silicon, n-type, 5-10 Ohm cm resistivity wafers - Chemical etching
Si3N4 and oxynitrides deposits on (111) silicon - Chemical etching
Si3N4 and oxynitrides grown as thin films by DC sputtering on (111) silicon wafers - Chemical etching
Si3N4 ceramic with TiN - Plasma etching
Si3N4 deposited as pyrolytic thin films - Chemical etching
Si3N4 oxynitrides and SiO2 DC/RF sputtered thin films - Chemical cleaning
Si3N4 pressed powder blanks - Polishing
Si3N4 thin film amorphous deposits on silicon wafer substrates - Chemical etching
Si3N4 thin films - Chemical cleaning
Si3N4 thin films - Chemical etching
Si3N4 thin films deposited by CVD on (100) silicon substrates - Chemical etching
Si3N4 thin films deposited by PECVD - Chemical etching
Si3N4 thin films deposited on silicon substrates - Chemical etching
Si3N4, SiO2 and glass - Chemical cleaning - Glass cleaner etchant
Si3N4, UN - Physical etching
Si3N4, oxynitrides and SiO2 thin films - Chemical cleaning
SiB6 specimens - Cleaning
SiC (0001) blanks - Metal decoration
SiC (0001) grown as alpha-II SiC - Abrasive polishing
SiC (0001) thin films grown on (100) silicon substrates - Chemical cleaning
SiC (0001) wafers - Dislocation etching
SiC (0001) wafers - Gas polishing
SiC (0001) wafers - Molten flux etching
SiC (111) wafers - Molten flux etching
SiC - Chemical etching
SiC - Chemical etching
SiC - Dislocation etching
SiC - Dislocation etching
SiC - Electrolytic etching
SiC - Electrolytic etching
SiC - Physical etching
SiC - Physical etching
SiC - Thermal etching
SiC blanks - Chemical cleaning
SiC carbide - Chemical etching
SiC ceramic with ZrB2 - Chemical and plasma etching
SiC epitaxy thin films - Molten flux, dislocation
SiC n-type wafers doped with aluminum - Metal doping
SiC platelets - Molten flux polishing
SiC reaction bonded - Electrolytic etching
SiC single crystal specimens - Electrolytic polishing
SiC thin films - Electrolytic etching
SiC thin films grown on Si (100) wafers - Gas doping
SiC thin films vapor deposited on silicon wafers - Moletn flux etching
SiC with 1% B4C, B doped SiC - Chemical etching
SiC with 5-10% oxide additions - Physical etching
SiN(x) and SiO2 thin films - Chemical ecthing
SiN(x) and SiO2 thin films - Ionized gas etching
SiO(x)N-H and Si-H thin films - Solvent cleaning
SiO2 (0001), (1010), natural single crystal and artificial fused quartz wafers and blank - Chemical etching
SiO2 (10T0) artificial alpha-quartz blanks - Chemical etching
SiO2 - Chemical polishing
SiO2 - Dislocation etching
SiO2 AT-cut quartz blanks - Acid tuning
SiO2 and Si3N4 thin films deposited on silicon - Chemical etching
SiO2 as a residual PSG surface film - Chemical etching
SiO2 as alpha-cristobalite - Thermal conversion
SiO2 as fused quartz ampoules - Chemical cleaning
SiO2 as natural single crystal - Chemical etching
SiO2 as quartzware - Chemical cleaning
SiO2 as single crystal quartz blanks - Chemical cleaning
SiO2 as the natural mineral coesite - Chemical etching
SiO2 as the natural mineral tridymite - Chemical etching
SiO2 as thermal oxidation on silicon wafers - Chemical etching
SiO2 as thin film deposits - Chemical etching
SiO2 deposited as CVD thin films on (100) silicon substrates - Chemical etching
SiO2 deposited on silicon wafer substrates
SiO2 deposition on aluminum and quartz blanks or silicon wafers - Chemical etching
SiO2 drawn for fiber optics and laser applications - Organic coating
SiO2 fused quartz epitaxy tubes - Chemical cleaning
SiO2 fused quartz tubes - Chemical cleaning
SiO2 fused quartz tubes - Chemical cleaning
SiO2 fused quartz tubes - Solvent cleaning
SiO2 glass specimens
SiO2 grown as a hydrated oxide on silicon wafers - Electrolytic oxidizing
SiO2 grown as a hydrated oxide on silicon wafers - Acid oxidation
SiO2 grown as a hydrated oxide on silicon wafers - Acid oxidation
SiO2 grown as a hydrated oxide on silicon wafers - Acid oxidation
SiO2 grown on IC devices - Chemical etching
SiO2 native oxide - Chemical etching
SiO2 single crystal artificial alpha-quartz blanks - Chemical thinning
SiO2 single crystal artificial specimens - Chemical cleaning
SiO2 single crystal blanks - Chemical cleaning
SiO2 single crystal blanks - Chemical cleaning
SiO2 single crystal blanks - Chemical etching
SiO2 thermally oxidized thin films on p-type (100) silicon wafers - Metal decoration
SiO2 thin film - Chemical etching
SiO2 thin film RF sputtered
SiO2 thin film coatings - Oxide, growth
SiO2 thin film deposited on InP (100) wafer substrates - Chemical etching
SiO2 thin film deposits - Chemical etching
SiO2 thin film deposits - Chemical etching
SiO2 thin film deposits - Ionized gas etching
SiO2 thin film deposits on silicon wafer - Chemical etching
SiO2 thin film layers grown on silicon - Chemical etching
SiO2 thin film oxidation of silicon at 1200?C - Chemical etching
SiO2 thin film oxidation of silicon, (111) n-type wafers - Chemical etching
SiO2 thin films 160 nm thick - Chemical etching
SiO2 thin films RF sputter deposited in argon on (100) oriented silicon wafers - Chemical etching
SiO2 thin films RF sputtered 200-700 nm thick on (100) silicon wafers - Chemical etching
SiO2 thin films and native oxides - Chemical etching
SiO2 thin films deposited by a special technique - Chemical etching
SiO2 thin films deposited in etched grooves of (100) silicon wafers - Chemical etching
SiO2 thin films deposited on (100) silicon substrates - Dislocation etching
SiO2 thin films deposited on (100) silicon wafers - Chemical etching
SiO2 thin films deposited on (100) silicon wafers - Ionized gas etching
SiO2 thin films deposited on (100) silicon wafers - Metal decoration
SiO2 thin films deposited on (111), p-type, 1-3 Ohm cm resistivity wafers - Chemical ecthing
SiO2 thin films deposited on (1OO) silicon wafers - Chemical etching
SiO2 thin films deposited on a variety of substrates/surfaces - Oxide, adhesive coat
SiO2 thin films deposited on silicon (100) - Chemical etching
SiO2 thin films deposited on silicon substrates - Chemical etching
SiO2 thin films deposited on silicon substrates - Chemical etching
SiO2 thin films deposited on silicon wafers
SiO2 thin films deposited on silicon wafers - Chemical etching
SiO2 thin films deposited on silicon wafers - Chemical etching
SiO2 thin films deposition on (100) silicon wafers - Oxide, growth
SiO2 thin films grown on (100) silicon wafers - Ionized gas etching
SiO2 thin films on Si (100) wafers - Chemical etching
SiO2 thin films on Si (100) wafers - Chemical etching
SiO2 thin films on silicon wafers as doped BPSG
SiO2 thin films on various substrates - Chemical cleaning
SiO2 x nH2O as the natural mineral opal - Acid coloring
SiO2-Al2O3-MgO-TiO2-CeO2 glass - 63SiO2-19Al2O3-9MgO-6TiO2-4.5CeO2
SiO2-Al2O3-MgO-ZrO2-CaF2 glass - 65SiO2-19Al2O3-9MgO-6.5ZrO2-1CaF2
SiO2-Al2O3-MgO-ZrO2-CeO2 glass - 65SiO2-19Al2O3-9MgO-6ZrO2-4.5CeO2
SiO2-MgO-Al2O3-TiO2-CaF2 glass - 65SiO2-19Al2O3-9MgO-6.5TiO2-1CaF2
SiO2/SiO4 as the natural mineral stisovite - Chemical etching
SiOi2 AT-cut quartz crystal blanks - Polishing
SiSiC - Chemical etching
SiSiC - Electrolytic etching
SiSn thin films deposited on (100) silicon wafers - Chemical etching
SiV2 thin films - Chemical etching/polishing
Sigma phase in austenitic stainless steel weld
Sigma phase in duplex steels - Electrolytic etching
Sigma phase in duplex steels - Electrolytic etching
Silica (SiO2) - Chemical thinning
Silica-alumina -magnesia-zirconia glass - 65SiO2 x 10Al2O3 x 9MgO x 6.5 ZrO2
Silica-alumina-magnesia-zirconia mixtures - Chemical etching
Silicon (Si) p-n junction - To stain p-n junctions in polycrystalline silicon
Silicon - Attack polishing
Silicon - Cathodic etching
Silicon - Chemical etching
Silicon - Chemical etching
Silicon - Chemical etching
Silicon - Chemical etching
Silicon - Chemical polishing
Silicon - Chemical polishing
Silicon - Chemical polishing and etching
Silicon - Chemical polishing and etching
Silicon - Chemical polishing and etching
Silicon - Chemical polishing and etching
Silicon - Chemical thinning
Silicon - Chemical thinning
Silicon - Chemical thinning
Silicon - Chemical thinning
Silicon - Copper depostion on dislocations
Silicon - Dislocation etching
Silicon - Dislocation etching
Silicon - Dislocation etching
Silicon - Dislocation etching
Silicon - Dislocation etching
Silicon - Dislocation etching
Silicon - Dislocation etching
Silicon - Electrolytic etching
Silicon - Electrolytic etching
Silicon - Electrolytic polishing
Silicon - Electrolytic polishing
Silicon - Etch for stacking faults and dislocations
Silicon - Etch for structure due to micro-segregation
Silicon - Etch pits etching
Silicon - Etchant for revealing twin planes
Silicon - For etch pits etching
Silicon - For stainning - Distinguishes between n and p type silicon
Silicon - Sample preparation procedure
Silicon - Se, Ge, and their alloys
Silicon - Si, Ge, and their alloys
Silicon - Si, Ge, and their alloys, GaSb, InSb - Dislocations on (100) and (111) planes of Si
Silicon - Si, Ge, and their alloys, InSb - Etch pitch on (111) planes, p-n junctions
Silicon - Si, Te, Se
Silicon carbide (SiC) - Beta SiC with B4C
Silicon carbide (SiC) - Chemical etching
Silicon carbide (SiC) - Chemical etching
Silicon carbide (SiC) - Electrolytic etching
Silicon carbide (SiC) - Electrolytic etching
Silicon carbide (SiC) - Electrolytic etching
Silicon carbide (SiC) - Etching of SiC for Transmission Electron Microscopy (TEM)
Silicon carbide (SiC) - For alpha SiC dosed with B
Silicon carbide (SiC) - For beta SiC
Silicon carbide (SiC) - For beta-SiC - Reveals beta/beta grain boundaries
Silicon carbide (SiC) - For pyrolytically manufactured beta SiC
Silicon carbide (SiC) - HPSiC
Silicon carbide (SiC) - Polycrystalline - Chemical and elctrolytic etching
Silicon carbide (SiC) - Pressureless sintered SiC (alpha and alpha + beta)
Silicon carbide (SiC) - Pressureless sintered SiC dosed with B and Al (alpha and alpha + beta)
Silicon carbide (SiC) - Pyrolytic - Electrolytic etching
Silicon carbide (SiC) - Si-SiC, infiltrated - Si, alpha and beta are differentiated
Silicon carbide (SiC) - SiC with B
Silicon carbide (SiC) - SiC, infiltrated - All phases are etched equally
Silicon carbide (SiC) single crystal - For revealing the growth spirals
Silicon carbide (SiC) single crystal - Shows differences between Si (smooth etch) and C (rough etch) faces on opposing (001) surfaces
Silicon carbide (SiC-(beta-form) - Chemical polishing
Silicon carbide (SiC-(beta-form) - Chemical polishing
Silicon carbide - Attack polishing
Silicon carbide SiC - Etching
Silicon defect delineation etches - Chemical etching
Silicon etchant - Polycrystalline silicon (Bell Labs) - Chemical etching
Silicon nitride (Si3N4) - Chemical etching
Silicon nitride (Si3N4) - Chemical etching
Silicon nitride (Si3N4) - Chemical etching
Silicon nitride (Si3N4) - Chemical etching
Silicon nitride (Si3N4) - Chemical etching
Silicon nitride (Si3N4) - Physical etching
Silicon nitride (Si3N4) - Physical etching
Silicon nitride (SiN) - Chemical and physical etching
Silicon nitride (SiN) - Chemical etching
Silicon nitride (SiN) - Chemical etching
Silicon nitride (SiN) - Chemical etching
Silicon nitride (SiN) - Ion beam machinning
Silicon nitride Si3N4 - Etching
Silicon nitride-alumina-silica system - (Si12Al18N8(2Si3N4 x 9Al2O3 x 6SiO2))
Silicon oxide wafer etch process
Silicon single crystals - Etching of the p-n transition
Silicon single crystals - For TEM sample preparation
Silicon single crystals - For TEM sample preparation
Silicon single crystals - For revealing dislocations
Silicon specimens - Chemical etching
Silicon specimens - Chemical etching
Silicon specimens - Chemical etching
Silicon specimens - Chemical etching
Silicon specimens - Chemical etching
Silicon specimens - Chemical etching
Silicon steels - Determination of grain orientaion
Silicon steels - Determination of grain orientaion
Silicon steels - Determination of grain orientaion
Silicon steels - Determination of grain orientaion
Silicon steels - Determination of grain orientaion
Silicon steels - Determination of grain orientaion
Silver - Ag alloys
Silver - Ag rich Ag-Cd alloys, Ag solders, Ag-Cu alloys
Silver - Ag solders
Silver - Ag-Cd, Ag-Cu, silver solders (Ag-Cu-Cd-Zn)
Silver - Ag-Mo alloys, Ag-W alloys, Ag-W carbides
Silver - Cemical polishing and etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical etching
Silver - Chemical polishing
Silver - Chemical polishing
Silver - Chemical polishing
Silver - Chemical polishing
Silver - Chemical thinning
Silver - Dislocation etching
Silver - Dislocation etching - Dislocation etching
Silver - Electric contact material, Silver (99.9% Ag)
Silver - Electric contact material, Silver (99.9% Ag)
Silver - Electric contact material, Silver (99.9% Ag)
Silver - Electrolytic etching
Silver - Electrolytic lapping
Silver - Electrolytic mechanical polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing
Silver - Electrolytic polishing - Dislocation etching
Silver - Electrolytic thinning
Silver - Electrolytic thinning
Silver - Electrolytic thinning
Silver - Etch pit etching
Silver - For silver and silver rich alloys
Silver - One of the best electrolyte for universal use
Silver - Pure Ag and Ag alloys, Ag solders
Silver - Pure Ag and Ag composites with other metals
Silver - Thermal etching
Silver - pure Ag, Ag-Ni and Ag-Pd alloys
Silver alloys - Chemical etching
Silver and alloys - Chemical thinning
Silver chromate etchant - Ag and Ag-Cu alloys - Chemical etching
Silver etchant - Si (111) wafers - Dislocation etching
Silver glycol etchant - Si (111) wafers and other orientation - Chemical etching
Silver single crystal - Chemical polishing
Silver single crystal - Chemical polishing
Silver single crystal - Chemical polishing and etching
Silver solders (Ag-Cu-Cd-Zn) - Chemical etching
Silver-Copper (Ag-Cu) - Electric contact material
Silver-Magnesium-Nickel (Ag-Mg-Ni) - Electric contact material
Silver-Nickel (Ag-Ni) - Electric contact material
Silver-Nickel (Ag-Ni) - Electric contact materials
Silver-Tungsten (Ag-W) - Electric contact material
Sintered Al materials, grain boundaries, removes smeared layers - Chemical etching
Sintered carbides - Chemical etching
Sintered carbides - Electrolytic polishing
Sintered carbides - General etching of sintered carbides
Sintered carbides - Particularly for sintered carbides which-apart from WC-also contain TiC, TaC and NbC
Sintered carbides - Sintered carbides containing Ni-phase
Sintered carbides - Sintered carbides with high content of Ti and Ta carbides
Sintered carbides - To reveal boundaries of the carbide grains against the cobalt phase
Sirtl's etchant - Dislocation etching
Sirtl's etchant - For Ge
Sirtl's etchant - Si (111) wafers and other orientations - Chemical etching
Sirtl's etchant - SiC (0001) wafers - Chemical polishing
Sirtl's etchant - Silicon
Sirtl's etchant - Silicon specimens - Chemical etching
Sirtl's etchant, modified - Si (111), (110) and (211) wafers, ingots - Chemical etching
Sleeve bearing materials (Al, Sn, Pb, Cu)-Al alloy clad to steel, Al-Si alloy clad to steel
Sleeve bearing materials (Cu, Pb, Ni, Ag) - Commercial bronze liner, Cu-Pb alloy liner, Cu-Pb-Sn alloy liner
Sleeve bearing materials (Sn, Cu, Pb)-Sn base babbitt overlay on Cu-Pb-Sn alloy liner
Sleeve bearing materials (Sn, Pb, Sn) - High Sn-Al alloy clad to nickel plated steel
Sleeve bearing materials - Cd alloy liner
Sm specimens - Thermal forming
Sm-Ag alloys - Chemical etching
Sm-Au alloys - Chemical etching
Sm-B system - Chemical etching
Sm-Bi system - Chemical etching
Sm-Co alloy - Approx. SmCo5
Sm-Co alloy - Domain structure
Sm-Co alloy - SmCo5 - Electrolytic polishing
Sm-Co alloys - Chemical etching
Sm-Co alloys - Chemical etching
Sm-Co alloys - Chemical etching
Sm-Co alloys, grain boundary etchant - Chemical etching
Sm-Co and Sm-Fe-Co-Cu alloys - Chemical etching
Sm-Co and Sm-Fe-Co-Cu alloys - Chemical etching
Sm-Co-Cu alloy - Sm(Co0.65 x Cu0.35)5.6 x Sm(Co0.84 x Cu0.16)6.4
Sm-Co-Cu alloy - SmCo(5-x)Cu(x)
Sm-Pd alloys (Approx. single Sm3Pd4) - Chemical etching
Sm2O3 + ZrO2 - Chemical etching
SmBr3 (0001) wafers - Alcohol polishing
SmCo3 specimens - Chemical cleaning
SmCo5 permanent magnetic alloys - Grain boundary and phase etching of SmCo5
SmCo5 permanent magnetic alloys - Phase etching of SmCo5
SmCo5 permanent magnetic alloys - Phase etching of SmCo5 (blue Sm2Co7, brown SmCo5)
Sn (001) and (111) wafers - Electrolytic polishing
Sn (001) and (111)-tetragonal alpha-tin single crystals - Electrolytic polishing
Sn (010) wafers - Chemical etching
Sn alloys - Chemical etching
Sn alloys - Chemical etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and Sn alloys - Electrolytic polishing - Dislocation etching
Sn and alloys - Electrolytic etching
Sn coatings on steel and Sn-bearing alloys - Chemical etching
Sn electroplated thin film - Chemical etching
Sn electroplated thin film - Chemical etching
Sn plated steel - Chemical etching
Sn shot - Chemical cleaning
Sn single crystal ingots - Electrolytic sawing
Sn single crystal specimens - Physical etching
Sn single crystal sphere - Chemical etching
Sn single crystal wires - Electrolytic polishing
Sn specimen, 1/4" wafer in diameter - Acid, cutting
Sn specimens - Electrolytic polishing
Sn white-tin single crystal - Chemical polishing
Sn-As system - Chemical etching
Sn-Bi alloy (5% Bi) - Chemical etching
Sn-Bi alloys - Chemical etching
Sn-Bi system - Electrolytic polishing
Sn-Bi-As alloys - For Sn and Bi rich alloys
Sn-Bi-As system - Sn4As3-Bi-SnAs section
Sn-Bi-Te alloys - Chemical etching
Sn-Cd alloys - Chemical etching
Sn-Cd alloys - Chemical etching
Sn-Co-Hf system (HfCo2Sn) - Chemical etching
Sn-Co-Nb system - Chemical etching
Sn-Co-Ti system - TiCo2Sn
Sn-Co-Zr system - ZrCo2Sn
Sn-Fe-Ti system (TiFe2Sn) - Chemical etching
Sn-Ni-Hf system - HfNiSn and HfNi2Sn
Sn-Ni-Nb system (NbNi2Sn) - Chemical etching
Sn-Ni-Ti system - TiNiSn and TiNi2Sn
Sn-Ni-Ti system - VNi2Sn
Sn-Ni-Ti system - ZrNiSn and ZrNi2Sn
Sn-Pa-Zr alloys (ZrPdSn) - Chemical etching
Sn-Pb alloys (Sn rich) - Electrolytic polishing
Sn-Pb alloys - Electrolytic polishing and chemical etching
Sn-Pb alloys and Sn coatings on steel - Chemical etching
Sn-Pb alloys, Sn solders - Chemical etching
Sn-Pb alloys, Sn-Containing bearing materials, Sn coatings - Chemical etching
Sn-Pb, Sn-Sb and Sn-Cd alloys - Chemical etching
Sn-Pb-As system - Chemical etching
Sn-Pb-As system - Chemical polishing
Sn-Pb-As system - SnPb-Sn4As3 region
Sn-Pb-Cd alloy - Eutectic alloy
Sn-Pb-Cd-Zn alloy - 28.6 wt.% Pb, 52.45 wt.% Sn, 16.7 wt.% Cd, 2.25 wt.% Zn
Sn-Rh-Nb system (NbRhSn) - Chemical etching
Sn-Sb alloys - Chemical etching
Sn-Sb-Cd alloys - Chemical etching
Sn-Sb-Cu alloys - Chemical etching
Sn-Sb-Se system (SnSe-Sb2Se3 section) - Chemical etching
Sn-Se system (SnSe-SnSe3 eutectic) - Pysical etching
Sn-Te system - Chemical polishing
Sn-Te-As system - Chemical etching
Sn-Te-As system - Chemical etching
Sn-Te-As system - Chemical etching
Sn-Te-As system - Chemical etching
Sn-Y alloys - Electrolytic polishing and etching
Sn-Zn system - Electrolytic thinning
Sn-based babbitt metal - Chemical etching
Sn-based babbitt metal - Chemical etching
Sn-coated steels - Chemical etching
Sn-containing Ti alloys - Chemical etching
Sn-plated steels - Chemical etching
Sn-rich alloys - Chemical etching
SnAgCu lead-free solder - Chemical etching
SnAgCu solder joints - EBSD sample preparation
SnO2 specimens - Chemical etching
SnO2 thin films - Chemical etching
SnO2 thin films deposited by CVD
SnO2 thin films deposited on 1 mm glass slides - Chemical etching
SnO2 thin films deposited on SiO2 coated silicon wafer - Electrolytic etching
SnTe (100) wafers - Chemical polishing
SnTe (111) ingot - Electrolytic polishing
SnTe - Chemical polishing
SnTe amorphous thin films - Chemical etching
SnTe specimens - Thermal etching for etch pits
SnTe thin films grown on muscovite mica (0001) substrates - Acid, float-off
Soda glass - Etch for recrystallization effects
Soda-boric oxide-niobium oxide - Chemical etching
Sodium - Chemical polishing
Sodium chloride (NaCl) - Chemical polishing and etching
Sodium chloride (NaCl) - Chemical polishing and etching
Sodium chloride (NaCl) - Chemical polishing of single crystal
Sodium chloride (NaCl) - Chemical thinning
Sodium chloride (NaCl) - Etch pits etching
Sodium chloride (NaCl) - Etch pits etching
Sodium chloride (NaCl) - Etch pits on (001) surfaces
Sodium chloride (NaCl) - For final polishing (110) and (111) faces
Sodium chloride (NaCl) rock salt - Chemical etching
Sodium chloride (NaCl) rock salt - Chemical etching
Sodium chloride (NaCl) rock salt - Etch pits on single crystals
Sodium chloride-Barium chloride - NaCl-1% BaCl2
Sodium chloride-Calcium chloride - Up to 0.1% CaCl2
Sodium fluoride (NaF) - Chemical etching
Sodium fluoride (NaF) - Chemical etching
Sodium specimens - Alcohol polishing
Sodium specimens - Chemical etching
Sodium specimens - Chemical etching
Sodium specimens - Chemical polishing
Soft magnetic glasses - Chemical etching
Solder paste alloys - NiTi alloys
Sopori's etchant - Si (111) wafers and other orientations - Chemical etching
Specimen preparation for EBSD - Ceramics
Spinel (MgAl2O4) - Chemical etching
Spinel (MgAl2O4) - Chemical etching
Spinel (MgAl2O4) - Chemical thinning
Spinel phase - Chemical etching
Spinel single crystal (MgAl2O4) - For etching (100) face
Sr (100) wafers and other orientations - Chemical polishing/etching
Sr material as the carbonate strontianite, SrCO3 and sulfate celestite, SrSO4 - Chemical etching
Sr-Hg system - Mechanical polishing
SrCl2 (100) wafers - Vacuum cleaning
SrF2 (100) thin film deposited on GaAs substrates - Chemical etching
SrF2 and Ba(x)Sr(1-x)F2 thin films and SrF2 (100) wafers - Chemical etching
SrF2 specimens - Chemical etching
SrGa12O19 (0001) cleaved wafers - Chemical etching
SrGa12O19 single crystals - Chemical etching
SrTiO3 single crystal specimens - Abrasive polishing
SrTiO3 single crystal specimens - Abrasive polishing
SrTiO3 specimens - Chemical etching
SrTiO3, MgTiO3 - Chemical etching
SrWO4 single crystal specimens - Chemical polishing
Stainless and alloy steels - Electrolytic polishing
Stainless and alloy steels - Electrolytic polishing
Stainless steel - Chemical polishing
Stainless steel - Chemical thinning
Stainless steel - Chemical thinning
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic polishing
Stainless steel - Electrolytic thinning
Stainless steel - Electrolytic thinning
Stainless steel - Electrolytic thinning
Stainless steel - Electrolytic thinning - Bollmann technique
Stainless steel - Electrolytic thinning by Bollmann technique
Stainless steel - Electrolytic thinning by Bollmann technique
Stainless steel - Electrolytic thinning by Mirand-Saulnier technique
Stainless steel - Electrolytic thinning by modified Mirand-Saulnier technique
Stainless steel - Electrolytic thinning in PTFE holders
Stainless steel - Fe-0.1C-1.5Mn-0.5Si-17/17.5Cr-12.5Ni-0.73Nb
Stainless steel - Fe-0.1C-1.5Mn-0.5Si-17Cr-12.5Ni-0.5Ti
Stainless steel - Fe-20Cr-25Ni-0.05C - Jet electrolytic polishing
Stainless steel - Good for all austenitic heat resistant alloys, 100F plus
Stainless steel - Jet electrolytic polishing
Stainless steel - Physical etching
Stainless steel - Type 304 or 316 stainless steel
Stainless steel - Type 304 Fe-18Cr-8.5Ni-0.06C-0.7Si-1.75Mn-0.36Mo. Type 309 Fe-23.6Cr-14Ni-0.04C-0.6Si-2Mn-0.3Mo
Stainless steel and alloy steel - Electrolytic polishing
Stainless steel and alloy steel - Electrolytic polishing
Stainless steel castings - General structure
Stainless steel castings - General structure
Stainless steel castings - General structure
Stainless steel castings - General structure
Stainless steel castings - General structure
Stainless steel castings - General structure
Stainless steel types 301, 307 - Fe-0.1C-6/8Mn-16/17Cr-4/6Ni-0.1N
Stainless steels - All types of stainless steels
Stainless steels - Carbon steels, low and high alloy steels, stainless steels
Stainless steels - Chemical etching
Stainless steels - Chemical etching
Stainless steels - Chemical etching
Stainless steels - Chemical etching
Stainless steels - Color etchant
Stainless steels - Color etchant
Stainless steels - Color etching - Colors carbides and gamma- prime phase
Stainless steels - Color etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic etching
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - Electrolytic polishing
Stainless steels - General etchant
Stainless steels - General etchant - Heavy attack on austenite, sigma phase and carbides
Stainless steels - Good general-purpose electrolyte
Stainless steels - Potentiostatic etching
Stainless steels - Potentiostatic etching
Stainless steels - Stainless steels different types
Stainless steels - Stainless steels with 0.08-0.20% C
Stainless steels - Tint etching
Stainless steels - To reveal surface carburisation in stainless steels
Stainless steels and high speed steels - Chemical etching
Stainless steels with sigma - Chemical etching
Stainlesss steels - Electrolytic polishing
Stead's No. I etchant - For P in steel
Stead's No. II etchant - For P in steel
Steatite (Mg3 Si4 O10 x (OH)2)) - Sample preparation
Steatite - Chemical etching
Steel - Carbon and alloy - Electrolytic polishing
Steel - Carbon, alloy, stainless - Electrolytic polishing
Steel - Martensite etching
Steel - Martensite etching
Steel - Tint etch for lath or plate martensite
Steel 304 type - Solvent cleaning
Steel 304 type blanks - Chemical cleaning
Steel all type - Chemical etching
Steel alloys containing carbides - Contrast etching
Steel blanks - Chemical etching
Steel blanks - Chemical thinning
Steel blanks - Electrolytic etching
Steel blanks - Electrolytic jet thinning
Steel carbon and alloy - Electrolytic polishing
Steel carbon and alloy - Electrolytic polishing
Steel castings - Particularly suitable for castings
Steel specimens - Carbide etching
Steel specimens - Carbide etching
Steel specimens - Carbon steel and Cr-Mo steel
Steel specimens - Electrolytic polishing
Steel specimens - Electrolytic polishing
Steel specimens - Electrolytic polishing
Steel specimens - Electrolytic polishing
Steel specimens - Electrolytic polishing
Steel specimens - Fe-Cr Alloys, Ni-Cr Alloys, high speed steels and austenitic manganese steels
Steel specimens - For untempered martensite in low alloy Cr-Ni steels
Steel specimens - General etching of carbon steel, cast iron, and also of certain alloyed steels
Steel specimens - TEM sample preparation
Steel specimens - To reveal ferrite grains in annealed carbon steel
Steel specimens - To reveal ferrite structure in low carbon content steels
Steel specimens - To reveal sigma phase
Steel, (100) single crystal specimens - Chemical cleaning for plating
Steel, 300 series - Electrolytic etching
Steel, alloys with untempered martensite - Chemical etching
Steel, carbon - Chemical cleaning/etching
Steel, hard - Chemical cleaning/etching
Steel, high-speed blanks - Chemical etching
Steel, low carbon blanks - Chemical etching
Steels (0.1-0.8% C, up to 3% alloys) - Chemical polishing
Steels (all types) - Chemical etching
Steels - Chemical polishing
Steels - Electrolytic polishing
Steels - Electrolytic polishing
Steels - Electrolytic polishing
Steels - Electrolytic polishing
Steels - Electrolytic polishing
Steels specimen - Cast irons, steels, tool steels, manganese steels, ferritic and martensitic stainless steels
Steels specimen - Cast irons, steels, tool steels, manganese steels, ferritic and martensitic stainless steels
Steels specimen - Cast irons, steels, tool steels, manganese steels, ferritic and martensitic stainless steels
Steels specimen - Cast irons, steels, tool steels, manganese steels, ferritic and martensitic stainless steels
Steels specimen - Cast irons, steels, tool steels, manganese steels, ferritic and martensitic stainless steels
Steels specimen - Electrolytic polishing
Steels specimen - Electrolytic polishing
Steels specimen - Electrolytic polishing
Steels specimen - Electrolytic polishing
Steels specimen - Electrolytic polishing
Steels specimen - Electrolytic polishing
Steels specimen - General etching of carbon steel and cast irons, and of certain alloyed steels
Steels treated by oxidation method - Chemical etching
Steels with high Si content - Chemical etching
Stellite 8, Haynes 21-62Co, Co-27Cr-5.5Mo-3Ni-1Fe+C
Stellite specimens - Solution will selectively attack iron and cobalt in steel alloys
Stellite-6 alloy - Electrolytic etching
Stellites up to 70% Co, Co-base superalloys - Electrolytic etching
Stoke's etchant - MgO (100) wafers - Dislocation etching
Strontium fluoride single crystal (SrF2) - Etch pits on (111) faces are revealed by etching
Strontium oxide-boric oxide silicon system - Chemical etching
Strontium specimens - Electrolytic polishing
Strontium tetrahydrate - SrC4H4O6 x 4H2O single crystal
Strontium tetrahydrate - SrC4H4O6 x 4H2O single crystal
Strontium titanate (O-Sr-Ti) - Dislocation etch in single crystals
Struer's D-2 etchant - Copper and copper alloys - Electrolytic etching
Struers A2 electrolyte - Al and Al alloys - Electrolytic polishing
Struers electrolyte A2 - For Al, Fe, Ni, Ag, stainless steel, steel, Sn, Ti - Dislocation etching
Struers electrolyte A2-I - For Al, Fe, Ni, Ag, stainless steel, steel, Sn, Ti - Dislocation etching
Struers electrolyte A2-II - For Al, Fe, Ni, Ag, stainless steel, steel, Sn, Ti - Dislocation etching
Struers electrolyte A3-I - Martensitic steel, Mo, stainless steel, Ti, V, Zr - Dislocation etching
Struers electrolyte A3-II - Martensitic steel, Mo, stainless steel, Ti, V, Zr - Dislocation etching
Struers electrolyte A8-I - Cr, Hf, Ni, Ti - Dislocation etching
Struers electrolyte A8-II - Cr, Hf, Ni, Ti - Dislocation etching
Struers electrolyte AC2-I - Cast iron, Mg, Ni, stainless steel, steels - Dislocation etching
Struers electrolyte AC2-II - Cast iron, Mg, Ni, stainless steel, steels - Dislocation etching
Struers electrolyte AC2-III - Cast iron, Mg, Ni, stainless steel, steels - Dislocation etching
Struers electrolyte D2 - Brass, Cu, Au - Dislocation etching
Struers electrolyte E5-I - Brass, bronze, carbon steel, cast iron - Dislocation etching
Struers electrolyte E5-II - Brass, bronze, carbon steel, cast iron - Dislocation etching
Struers electrolyte E5-III - Brass, bronze, carbon steel, cast iron - Dislocation etching
Sulfide etchant of Kunkele - Iron and steels - Chemical etching
Sulfides in stainless steels - Chemical etching
Super picral - Carbon and alloy steels with medium carbon content - General structure
Super picral - Iron and steels - Chemical etching
Super picral - Steels - Chemical etching
Superalloy 713LC - Ni-11.7Cr-4.5Mo-6Al-0.75Ti-2Nb(+Ta) (+0.06C)
Superalloy B-1900 - 65Ni-10Co-8Cr-6Mo-6Al-4Ta-1Ti-0.1C-0.1Zr-0.015B
Superalloy In 100 - 60Ni-15Co-10Cr-3Mo-5.5Al-5Ti-1V-0.18C-0.06Zr-0.014B
Superalloy MAR200 - 60Ni-10Co-9Cr-12.5W-5Al-2Ti-1Nb-0.15C-0.05Zr-0.015C
Superalloy MAR200 - Chemical etching
Superalloy MAR200 - Plastic deformation can be revealed by polish-etch-electro polish technique
Superalloy Udimet 700 - 56Ni-17Co-15Cr-5Mo-4Al-3Ti-0.07C
Superalloys - Electrolytic polishing
Superalloys - Electrolytic polishing
Superalloys - Etches gamma phase, carbides, and grain boundaries
Superalloys - Etches gamma phase, carbides, grain-contrast etchant
Superalloys, Hastelloy A type - Chemical etching
Superoxal etchant - Germanium - Etch pits etching
Superoxol - InP (100) Zn doped p-type wafers - Chemical polishing
Superoxol No. 2 etchant - Ge hemispheres - Chemical etching
Superoxol No. 2 etchant, dilute - Ge hemispheres - Chemical etching
Superoxol etchant - Antimonium - Dislocation etching
Superoxol etchant - For Ge - Chemical etching
Superoxol etchant - Ge (111) wafers - Chemical etching
Superoxol etchant - Ge (111) wafers lithium diffused - Chemical etching
Superoxol etchant - Ge specimens - Chemical etching
Superoxol etchant - Germanium - Dislocation etching
Superoxol etchant - InAs (111) wafers - Chemical etching
Superoxol etchant - InSb (111) wafers - Chemical etching
Superoxol etchant, modified - Germanium - Chemical etching
Superoxol etchant, varity - Ge hemispheres - Chemical etching
Surface layers on Ni-base alloys, plasma coatings - Chemical etching
T.D. Ni-Cr alloy - 20% Cr-2% ThO2 - Electrolytic polishing and etching
T.Z.M. Molybdenum - Mo-0.5 wt.% Ti-0.08 wt.% Zr-0.02 wt.% C
TD-Ni, DS-NiCr, Inconel MA-754, TD-NiCrAl and DST-NiCrAl - Chemical etching
TD-NiCr alloy - Heat tint etching
TD-Nickel - Electrolytic etching
TMAH etching of silicon II - Chemical etching
TMAH etching of silicon wafers I - Chemical etching
TRW-NASA VIA alloy - Ni-6Cr-2Mo-1Ti-5.5Al-9Ta-6W-7.5Co-0.5Hf-0.4Re-0.15C (+B, Zr)
Ta (100) wafers - Chemical etching
Ta (111) specimen - Chemical etching
Ta - Chemical-Mechanical polishing
Ta alloy specimens containing a Ta silicide surface coating - Chemical etching
Ta alloys - Chemical etching
Ta alloys - Chemical etching
Ta alloys - Chemical etching
Ta alloys - Chemical etching
Ta alloys - Chemical etching
Ta alloys - Chemical etching
Ta alloys - Chemical etching
Ta and Ta alloy - Anodizing
Ta and Ta alloys - Electrolytic polishing - Dislocation etching
Ta and Ta alloys - Electrolytic polishing - Dislocation etching
Ta and Ta alloys - Electrolytic polishing - Dislocation etching
Ta and Ta alloys - Electrolytic polishing - Dislocation etching
Ta and Ta alloys - Electrolytic polishing - Dislocation etching
Ta and Ta alloys, color etchant - Anodizing
Ta and Ta-base alloys, Nb-Re alloys - Chemical etching
Ta and alloys - Electrolytic etching
Ta and alloys - Electrolytic etching
Ta and alloys - Electrolytic etching
Ta and high-Ta alloys - Chemical etching
Ta as high purity slugs - Chemical cleaning
Ta material - Chemical etching
Ta material - Chemical polishing
Ta material - Electrolytic polishing
Ta or TaN etchant - For Ta and Ta alloys
Ta oxides, nitrides and carbides - Chemical etching
Ta poly sheet blanks - Chemical etching
Ta poly sheet blanks - Chemical etching
Ta poly sheet blanks - Chemical etching
Ta specimens - Chemical cleaning
Ta specimens - Chemical cleaning
Ta specimens - Chemical etching
Ta specimens - Chemical polishing
Ta specimens - Chemical polishing
Ta specimens - Chemical polishing
Ta specimens - Electrolytic polishing
Ta specimens - Electrolytic polishing
Ta specimens - Electrolytic polishing
Ta thin films - Chemical etching
Ta thin films converted to Ta2O5 and TaN - Chemical etching
Ta(C, N, O) specimen - Chemical etching
Ta(C,N,O) - Chemical etching
Ta, Ta-Ir and Ta-Rh alloys - Chemical etching
Ta, W-Anodizing
Ta-C alloys - Chemical etching
Ta-C alloys - Chemical etching
Ta-C alloys - Chemical etching
Ta-C system - < 1.5 at.% C - Chemical polishing
Ta-Mo and Ta noble metal alloys - Chemical etching
Ta-Mo-C alloys - Chemical etching
Ta-Pd system - Chemical etching
Ta-Pt alloys (50-100 at.% Pt) - Electrolytic etching
Ta-Re alloys - Chemical etching
Ta-Ru alloys (Approx. TaRu) - Eletrolytic polishing and etching
Ta-Sc alloys - Chemical etching
Ta-Ti alloys - Chemical etching
Ta-W-Hf alloy T-111-8% W, 2% Hf
Ta-W-Hf alloy T-111-8% W, 2% Hf - Electrolytic polishing by twin jet
Ta-W-Re alloys - Chemical etching
Ta-Zr alloys - Chemical etching
Ta-Zr alloys - Electrolytic polishing and etching
Ta2O3 thin films - Chemical etching
Ta2O5 specimen - Chemical etching
Ta2O5 specimens - Thermal ecthing
Ta2O5 thin films - Gas, stabilizing
TaB2 and other specimens - Chemical etching
TaB2 and other specimens - Chemical etching
TaB2, TaB, and Ta3B4 specimens - Chemical etching
TaC - Chemical etching
TaC - Chemical etching
TaC - Chemical etching
TaC specimens - Chemical cleaning
TaC specimens - Chemical etching
TaC, (Fe,Si)C - Chemical etching
TaC, TiC, SiC - Electrolytic etching
TaC, electrolytic alloy deposited thin films on different substrates - Chemical etching
TaC, electrolytic alloy deposited thin films on different substrates - Chemical etching
TaH powder - Chemical etching
TaH thin films grown on (100) - Electrolytic etching
TaMo single crystal alloy - Electrolytic polishing
TaN - Chemical etching
TaN thin film deposits - Chemical polishing
TaN thin films - Chemical etching
TaN thin films - Chemical etching
TaN thin films - Chemical etching
TaS2 single crystals - Chemical etching
TaSe2 single crystal specimens - Chemical etching
TaSi2 as thin films - Ionized gas etching
TaSi2 thin films - Chemical etching
TaSi2 thin films - Chemical etching
TaSi2 thin films 2500-2800 A - Chemical etching
TaSi2 thin films deposited on silicon (100) - Chemical cleaning
TaSi2 thin films deposited on silicon - Ionized gas etching
TaSi2 thin films deposited on silicon substrates - Ionized gas etching
TaW thin films-Solvent removal
Taff's etchant - For Sn-Bi
Taff's etchant - Pure Sn and Sn-Bi alloys - Chemical etching
Taff's etchant - Sn-Bi alloy (12% Bi) - Chemical etching
Talc, H2O x 3MgO x 4SiO2
Tantalum - Attack polishing
Tantalum - Attack polishing
Tantalum - Attack polishing
Tantalum - Attack polishing
Tantalum - Attack-polishing
Tantalum - Chemical etching
Tantalum - Chemical etching
Tantalum - Chemical etching
Tantalum - Chemical etching
Tantalum - Chemical etching
Tantalum - Chemical etching
Tantalum - Chemical etching
Tantalum - Chemical polishing
Tantalum - Chemical polishing
Tantalum - Chemical polishing
Tantalum - Chemical polishing
Tantalum - Chemical polishing
Tantalum - Chemical polishing and etching
Tantalum - Dislocation etching
Tantalum - Electrolytic etching
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing
Tantalum - Electrolytic polishing and chemical etching
Tantalum - Electrolytic polishing and etch pits etching
Tantalum - Electrolytic thinning
Tantalum - Electrolytic thinning and polishing
Tantalum - Electrolytic thinning by window technique
Tantalum - Electrolytic thinning by window technique
Tantalum - Jet etching
Tantalum - Mo, Ta, Nb, Mo-Ti alloys
Tantalum - Nb, Ta, Mo and their alloys
Tantalum - Physical etching
Tantalum - Pure Ta
Tantalum - Ta and Ta alloys
Tantalum - Ta and Ta alloys
Tantalum - Ta and Ta alloys
Tantalum - Ta and Ta base alloys
Tantalum - Ta and Ta base alloys
Tantalum - Ta and Ta base alloys, Nb and Nb base alloys, Nb-Cr alloys, Mo and Mo alloys
Tantalum - Ta base alloys, Nb base alloys
Tantalum - Ta base and Nb base alloys
Tantalum - Ta, Nb, and their alloys
Tantalum - W and W base alloys, Ta na Ta base alloys
Tantalum boride (TaB2) - Electrolytic etching
Tantalum carbide (TaC) - Thermal etching
Tantalum nitrides (Ta8N, Ta38N5) - Electrolytic thinning
Tantalum specimens - Chemical etching
Tantalum-nitrogen system - 0.6-6.5 at.% N
Tantalum-nitrogen system - 10.6 at.% N2
Tb single crystal specimens - Thermal etching
Tb-Ag alloys - Chemical etching
Tb-Au alloys - Chemical etching
Tb-Bi system - Chemical etching
Tb-Pd alloys (Approx. Tb3Pd4) - Chemical etching
TbCo2Si specimens - Chemical etching
TbCu2Ge2 specimens - Chemical etching
Te (0001) and (1010) wafers - Chemical polishing
Te (0001) and (1010) wafers - Oxide removal
Te (0001) and (1010) wafers - Te (0001) and (1010) wafers
Te (0001) and (12T0) wafers - Chemical cleaning
Te (0001) and other wafer orientations - Chemical etching
Te (0001) specimens - Abrasive polishing
Te (0001) wafers - Chemical polishing
Te (0001) wafers - Chemical polishing
Te (0001) wafers - Sawing
Te (1010) wafers - Chemical polishing
Te (1010) wafers - Dislocation etching
Te (10T0) wafers - Chemical etching
Te material used for epitaxy growth - Salt, removal
Te-As alloys - Chemical etching
Te-bismuth telluride - Chemical etching
TeO2 as natural single crystals - Chemical polishing/etching
TeO2 crystalline native oxide or TeO, amorphous native oxide - Salt, removal
TeO2 grown as a stable native oxide on CdTe (110) wafers - Chemical etching
Tellurium - Dislocation etching
Tellurium oxide (TeO2)-phosphoric pentoxide system (P2O5) - Chemical etching
Tellurium oxide-boric oxide system - Chemical etching
Tellurium oxide-boric oxide-cadmium oxide glass-TeO2 - B2O3 - CdO system
Tellurium oxide-boric oxide-cobalt oxide glass - TeO2-B2O3-CaO glass
Tellurium oxide-boric oxide-germanium oxide glass - TeO2-B2O3-GeO2 system
Tellurium oxide-boric oxide-iron oxide glass - TeO2-B2O3-Fe2O3-system
Tellurium oxide-boric oxide-manganese oxide glass
Tellurium oxide-boric oxide-nickel oxide glass - TeO2-B2O3-NiO system
Tellurium single crystal - Chemical etching
Tellurium specimens - Chemical etching
Tellurium specimens - Electrolytic polishing
Tellurium specimens - Electrolytic-mechanical polishing
Tellurium specimens - Ge, Te, Se, telurides, selenides and Zr silicide
Tellurium specimens - Si, Te, Se
Temper embrittlement in steel - Chemical etching - General microstructure
Temper embrittlement in steel - Chemical etching
Temper embrittlement in steels - Chemical etching
Terbium specimens - Electrolytic polishing
Textured alpha-alumina - EBSD sample preparation
Th and Th alloys - Electrolytic polishing - Dislocation etching
Th and Th alloys - Electrolytic polishing - Dislocation etching
Th and Th alloys - Electrolytic polishing - Dislocation etching
Th and Th alloys - Electrolytic polishing - Dislocation etching
Th and aloys - Chemical etching
Th specimens - Chemical cleaning
Th specimens - Chemical etching
Th specimens - Electrolytic polishing/etching
Th(x)U(y)U2 specimens - Chemical etching
Th(x)U(y)U2 specimens - Chemical etching
Th, U, and alloys - Electrolytic etching
Th-C alloys - Chemical and electrolytical etching
Th-Cu alloys - Electrolytic polishing, air etching
Th-Ge alloys - Chemical etching
Th-Mo alloy - Sample preparation
Th-Pd alloys (Approx. Th3Pd4) - Chemical etching
Th-Zr alloy - Physical ething
ThC - Chemical etching
ThC carbide - Chemical etching
ThC carbide - Chemical etching
ThC carbide - Chemical etching
ThC2 and (Th,U)C2 - Chemical etching
ThC2 carbide - Chemical etching
ThC2 carbide - Chemical etching
ThO2 (111) wafers - Chemical etching
ThO2 + Y2O3 specimens - Chemical etching
ThO2 specimens - Chemical etching
ThO2-W - Electromechanical polishing
ThO2-Y2O3 mixtures - Chemical ecthing
Thallium - Chemical etching
Thallium - Chemical etching
Thallium - Chemical etching
Thallium - Chemical etching
Thallium - Chemical etching
Thallium - Chemical etching
Thallium specimens - Chemical etching
Thallium specimens - Chemical etching
Thallium specimens - Chemical etching
Thallium specimens - Electrolytic etching
Thallium specimens - Electrolytic polishing
Thallium specimens - Electrolytic-mechanical polishing
Thin section for EBSD - EBSD sample preparation
Thorium - Attack polishing
Thorium - Electrolytic and chemical etching
Thorium - Electrolytic etching
Thorium - Electrolytic etching
Thorium - Electrolytic etching
Thorium - Electrolytic polishing
Thorium - Electrolytic polishing
Thorium - Electrolytic polishing
Thorium - Electrolytic polishing
Thorium - Electrolytic polishing
Thorium - Electrolytic polishing
Thorium - Physical etching
Thorium - Th and Th alloys
Thorium carbide (ThC) - Cathodic etching
Thorium carbide (ThC) - Chemical and electrolytic etching
Thorium carbide (ThC) - Chemical ecthing
Thorium carbide (ThC) - Electrolytic polishing
Thorium dicarbide (ThC2)-uranium dicarbide (UC2) - Electrolytic polishing
Thorium oxide (ThO2) - Chemical etching
Thorium oxide (ThO2) - Chemical etching
Thorium oxide (ThO2) - Chemical etching
Thorium oxide (ThO2) - Chemical etching
Thorium oxide (ThO2) - Chemical etching
Thorium oxide (ThO2)-yttrium oxide (Y2O3) - Chemical etching
Thorium oxide (ThO2)-yttrium oxide (Y2O3)-10 mol.% ThO2 - Chemical etching
Thulium orthoferrite (TmFeO3) - Chemical polishing
Thulium specimens - Electrolytic polishing
Ti alloyed steels - To reveal Ti containing grain boundary phases in Ti alloyed steels
Ti alloys - Chemical etching
Ti alloys - Chemical etching
Ti alloys - Chemical etching
Ti alloys - Chemical etching
Ti alloys - Chemical etching
Ti alloys - Electrolytic etching
Ti alloys and Ti-Pd alloys (up to 42% Pd) - Chemical etching
Ti alloys, etches segregation - Chemical ecthing
Ti alloys, removal of Cu deposits on the surface - Chemical etching
Ti alloys, removal of Sn deposits on the surface - Chemical etching
Ti and Ti alloy - Modified window technique
Ti and Ti alloys (single crystals) - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing - Dislocation etching
Ti and Ti alloys - Electrolytic polishing and chemical etching
Ti and Ti-base alloys, segregations, color etchant - Electrolytic etching
Ti and alloy - Sample preparation procedure
Ti and alloys (Battelle) - Chemical etching
Ti and alloys - Chemical etching
Ti and alloys - Chemical etching
Ti and alloys - Chemical etching
Ti and alloys - Chemical etching
Ti and alloys - Chemical etching
Ti and alloys - Electrolytic etching
Ti and alloys - Heat etching
Ti borides - Electrolytic etching
Ti evaporated as thin films - Chemical etching
Ti rod (electrode) - Chemical cleaning
Ti sheet and alloys - Chemical cleaning
Ti sheet and alloys - Chemical etching
Ti sheet and alloys - Chemical etching
Ti sheet and alloys - Chemical etching
Ti sheet and alloys - Chemical etching
Ti sheet and alloys - Chemical etching
Ti sheet specimens - Chemical etching
Ti specimens - Chemical etching
Ti specimens - Chemical etching
Ti specimens - Chemical etching
Ti specimens - Chemical etching
Ti specimens - Chemical etching
Ti specimens - Chemical polishing
Ti specimens - Chemical polishing/etching
Ti specimens - Chemical polishing/etching
Ti specimens - Electrolytic polishing
Ti specimens - Electrolytic polishing
Ti specimens - Electrolytic polishing
Ti specimens - Electrolytic polishing
Ti specimens - Electrolytic polishing
Ti specimens - Electrolytic polishing
Ti specimens - Salt polishing
Ti specimens - Thermal etching
Ti specimens and thin films - Chemical etching
Ti specimens and thin films - Chemical etching
Ti specimens and thin films - Chemical etching
Ti specimens used for electroplating - Electrolytic polishing
Ti thin film deposit - Chemical etching
Ti thin film deposit - Chemical etching
Ti thin film evaporation in vacuum systems - Chemical etching
Ti thin films - Chemical etching
Ti thin films - Chemical etching
Ti thin films - Electrolytic oxidation
Ti, 5% Al and 2.5% Sn alloy - Chemical etching
Ti-12.6% V specimen - Chemical thinning
Ti-6Al-4V alloy - Chemical etching
Ti-Ag alloy - Alloys with 10-26 at.% Ag
Ti-Al alloy ( <25% Al) - Chemical etching
Ti-Al alloy (< 25% Al) - Precipitate etching
Ti-Al alloy (30% Al) - Electrolytic polishing
Ti-Al alloy (Ti-4Al) - Chemical polishing
Ti-Al alloy (Ti-8.6-10Al) - Electrolytic polishing
Ti-Al alloy - Alloy with 5% Al
Ti-Al alloys (3-46% Al) - Electrolytic polishing
Ti-Al alloys (5% Al) - Electrolytic thinning
Ti-Al alloys (Ti rich) - Electrolytic polishing and micro etching
Ti-Al alloys - Alloys with up to 40% Al
Ti-Al alloys - Chemical etching
Ti-Al alloys - Chemical etching
Ti-Al alloys - Chemical etching
Ti-Al alloys - Electrolytic thinning
Ti-Al alloys - Ti rich alloys
Ti-Al system - Alloys with up to 5 at.% Al
Ti-Al-B alloy - Alloy with 5% Ti and 1% B
Ti-Al-B alloys - Chemical etching
Ti-Al-Mn alloy - Electrolytic thinning
Ti-Al-Mn alloy - Electrolytic thinning in PTFE holder
Ti-Al-Mo alloy - 8Al-1Mo-1V
Ti-Al-Mo alloy - Alloy with 6% Al and 2% Mo
Ti-Al-Mo-V alloy - 4-8% Al, 1-3% Mo, 1% V
Ti-Al-Mo-V alloy - 8Al-1Mo-1V
Ti-Al-Mo-V alloy - Chemical etching
Ti-Al-Mo-V alloy - Ti-811 (Ti-8Al-1Mo-1V)
Ti-Al-Mo-V alloy - Ti-8Al-1Mo-1V
Ti-Al-Nb-Ta alloy - Electrolytic thinning
Ti-Al-Nb-Ta-Mo alloy - Ti-6Al-2Nb-1Ta-0.8Mo
Ti-Al-Ni, Ti-Al-Sn, and Ti-Si alloys, hydrides - Chemical etching
Ti-Al-Si alloy (< 10% Al, 1% Si) - Chemical etching
Ti-Al-Sn alloy - Alloy with 2.5-5% Sn, 7-14.5% Al
Ti-Al-Sn alloy - Alloy with 5% Al and 2.5% Sn
Ti-Al-Sn alloy - Alloy with 5% Al and 2.5% Sn
Ti-Al-Sn alloy - Alloys with 5% Al and 2.5% Sn
Ti-Al-Sn alloy - Chemical etching
Ti-Al-Sn-Zr-Mo alloy - Ti-6Al-2Sn-4Zr-2Mo
Ti-Al-V alloy (5.9-9.7% Al, 2-6% V) - Chemical etching
Ti-Al-V alloy (6% Al, 4% V) - Chemical etching
Ti-Al-V alloy (6% Al, 4% V) - Electrolytic thinning
Ti-Al-V alloy (6Al-4V) - Chemical etching
Ti-Al-V alloy (6Al-4V) - Chemical etching
Ti-Al-V alloy (6Al-4V) - Chemical etching
Ti-Al-V alloy (6Al-4V) - Chemical polishing
Ti-Al-V alloy (6Al-4V) - Chemical polishing
Ti-Al-V alloy (6Al-4V) - Electrolytic polishing
Ti-Al-V alloy (6Al-4V) - Electrolytic thinning
Ti-Al-V alloy (6Al-4V)
Ti-Al-V alloy - Alloy with 6% Al and 4% V
Ti-Al-V alloy - Electrolytic thinning
Ti-Al-V alloys - Chemical etching
Ti-Al-V-Sn alloy - Alloy with 6% Al, 6% V and 2% Sn
Ti-Al-V-Sn alloy - Alloy with 6% Al, 6% V and 2% Sn
Ti-Al-V-Sn alloy - Ti-6Al-6V-2Sn alloy
Ti-Al-V-Sn alloy - Ti-6Al-6V-2Sn alloy
Ti-Al-Zr alloys - Alloys with 4.6-4.9% Al and 2-4% Zr
Ti-Al-Zr-Mo-Si alloy - Ti-6Al-6Zr-0.5Mo-0.25Si
Ti-Al-Zr-W-Si alloys - Electrolytic polishing and chemical etching
Ti-Au alloys - For alloys with 4 - 20 at.% Au
Ti-B system - Ti-TiB eutectic
Ti-Be alloys - For alloys with < 10% Be
Ti-Bi alloy (Ti-3.1 at.% Bi) - Chemical etching
Ti-C alloy - Potentiometric etching
Ti-C system - Ti-TiC section
Ti-C system - TiC(x), 0.5 < x < 1.0 - Single crystal
Ti-Co alloy - Alloy with 5% Co
Ti-Co alloy - F.c.c low Ti alloys
Ti-Co alloy - Ti - 3/8 at.% Co
Ti-Cr alloy - Ti - 10-20 at.% Cr - Electrolytic thinning
Ti-Cr alloy - Ti-6% Cr
Ti-Cr alloys - Chemical etching
Ti-Cr-V-Al alloy - 13% Cr, 11% V, 8% Al
Ti-Cr-V-Al alloy - 13Cr-11V-3Al - Electrolytic polishing
Ti-Cr-V-Al alloy - 13V-11Cr-3Al - Chemical polishing
Ti-Cu alloy - Electrolytic thinning by Mirand-Saulnier technique
Ti-Cu alloy - For alloys with 5% Cu
Ti-Cu alloys (approx. Ti2Cu) - Chemical etching
Ti-Cu alloys - Chemical etching
Ti-Cu alloys - Chemical etching
Ti-Cu alloys - Chemical etching
Ti-Fe alloy - Ti-4.5-13 at.% Fe
Ti-Mn alloy (10% Mn) - Electrolytic polishing
Ti-Mn alloy (8% Mn) - Electrolytic polishing and chemical etching
Ti-Mn alloy - Alpha-Beta alloys
Ti-Mn alloy - Ti-8.6 at.% Mn
Ti-Mn alloys - Chemical etching
Ti-Mo alloy (11% Mo) - Chemical etching
Ti-Mo alloy (11-17 at.% Mo) - Electrolytic thinning
Ti-Mo alloy (15% Mo) - Electrolytic polishing
Ti-Mo alloy (15.2 at.% Mo) - Chemical polishing
Ti-Mo alloy (7 at.% Mo) - Chemical etching
Ti-Mo alloy - Electrolytic thinning
Ti-Mo alloys (2-10% Mo) - Chemical etching
Ti-Mo-Zr-V-Al alloy - Electrolytic thinning
Ti-Nb diffusion couple - Electrolytic etching
Ti-Ni alloys (8-14 at.% Ti) - Jet electrolytic polishing
Ti-Ni alloys (Ni-12% Ti) - Electrolytic polishing
Ti-Ni alloys (Ti-3/5 at.% Ni) - Chemical etching
Ti-Ni-Cr alloy - TiNi-2/8% Cr
Ti-Ni-Si alloy - TiNi-1.3/5% Si
Ti-O-H alloy - Attack polishing
Ti-O-H alloys - Chemical etching
Ti-P alloys
Ti-Pb alloy (Ti-5.3 at.% Pb) - Chemical etching
Ti-Pd alloys (Ti rich) - Chemical etching
Ti-Pd alloys (Ti-8 at.% Pd) - Chemical etching
Ti-Si alloy - Ti-0.5/1.5 at.% Si
Ti-Si alloys - Chemical etching
Ti-Si system (Ti-Ti5Si3 eutectic) - Chemical etching
Ti-Sn alloys (10-40% Sn) - Electrolytic thinning
Ti-Sn alloys (up to 25% Sn) - Chemical etching
Ti-Ta alloy - Chemical etching and thinning
Ti-TiAg-Ag thin films - Chemical etching
Ti-V alloy (20% V) - Electrolytic thinning
Ti-V alloy - Electrolytic thinning
Ti-V alloy - Electrolytic thinning
Ti-V alloy - Electrolytic thinning and jet etching
Ti-V alloys (>20% V) - Dislocation etching
Ti-V alloys (15.5% V) - Chemical etching
Ti-V alloys (5-20% V) - Chemical etching and electrolytic thinning
Ti-V alloys (Beta alloys, 20-40 wt.% V) - Chemical polishing and elecytrolytic etching
Ti-V alloys - Chemical polishing
Ti-V-Cr-Al-Mo-Zr alloy - Beta C Ti-3Al-8V-6Cr-4Mo-4Zr
Ti-V-Cr-Al-Mo-Zr alloy - RMI (38-6-44) alloy Ti-3.5Al-8V-6Cr-4Mo-4Zr
Ti-V-Cr-Zr-Mo-Al alloy - Ti-3Al-8V-6Cr-4Zr-4Mo
Ti-V-Fe-Al alloy - Electrolytic polishing, chemical etching, electrolytic thinning
Ti-V-Si alloy - Ti-40V-1Si - Electrolytic polishing
Ti-Zr alloy (2% Ti) - Electrolytic thinning
Ti-Zr alloy (25 at.% Ti) - Chemical thinning and polishing
Ti2O3 specimens and thin films - Chemical etching
Ti3SiC2 (titanium silicon carbide) - Chemical etching
Ti6Al4V alloy - Chemical etching
TiB2 - Chemical etching
TiB2 - Chemical etching
TiB2 - Chemical etching
TiB2 - Chemical etching
TiB2 - Chemical etching
TiB2 - Chemical etching
TiB2 - Chemical etching
TiB2 - Electrolytic etching
TiB2 and TiC single crystal wafers - Cleaning
TiB2, ZrB2 - Chemical etching
TiC (001) cleaved wafers - Electrolytic etching
TiC (001) cleaved wafers - Polishing
TiC (100) thin films - Electrolytic polishing
TiC (100) wafers - Gas cleaning
TiC and TaC - Electrolytic etching
TiC coated steel - Structure of titanium carbide layer
TiC coated steel - This solution revealed a good grain boundry pattern in titanium carbide layer
TiC single crystal ingot - Electrolytic polishing
TiC-C alloys - Electrolytic etching
TiD2 as thin films - Chemical etching
TiN thin films deposited on (100) silicon wafers - Chemical etching
TiN thin films deposited on Ti (0001) substrates - Chemical etching
TiN thin films deposited on poly - Si-Ionized gas etching
TiN thin films deposited on poly-Si - Chemical etching
TiN thin films deposited on silicon wafers - Chemical etching
TiO2 (001) basal oriented wafers - Chemical cleaning
TiO2 (110) natural single crystal rutile specimens - Salt flux decoration
TiO2 - Chemical etching
TiO2 - Chemical polishing
TiO2 - Dislocation etching
TiO2 - Physical etching
TiO2 as a native oxide on titanium substrates - Chemical ecthing
TiO2 as natural minerals - Chemical etching
TiO2 as natural single crystal rutile - Chemical cleaning
TiO2 as natural single crystal rutile - Gas cleaning
TiO2 natural rutile specimens - Chemical cleaning
TiO2 thin film deposited on GaAs (100) substrates - Chemical etching
TiO2 thin film deposits - Chemical etching
TiO2 thin films deposited on (111), n-type silicon substrates - Chemical etching
TiO2 thin films deposited on GaAs (100) substrates - Ionized gas cleaning
TiSi thin films grown on (100) silicon wafers - Chemical etching
TiSi2 arc melted - Chemical polishing
TiSi2 thin film formed on silicon (100) substrates - Chemical etching
TiSi2 thin film grown on Si substrates - Chemical etching
TiSi2 thin films deposited on silicon wafers - Ionized gas etching
TiSi2 thin films grown on silicon substrates - Acid oxidation
TiW thin films - Chemical etching
Tin (Sn) single crystal - Electrolytic polishing, chemical etching
Tin - Chemical etching
Tin - Chemical polishing
Tin - Dislocation etching
Tin - Electrolytic etching
Tin - Electrolytic etching
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing
Tin - Electrolytic polishing and etching
Tin - Electromechanical polishing
Tin - Grain contrast (color) in pure Sn and most Sn alloys
Tin - One of the best electrolyte for universal use
Tin - Pure Sn
Tin - Pure Sn, Sn rich slloys with Cd, Fe, Sb, Cu
Tin - Pure Sn, Sn-Cd, Sn-Fe, Sn-Pb, and Sn-Pb-Cu alloys
Tin - Sn layers on steel and cast irons
Tin - Sn layers on steel, Sn-Pb alloys
Tin - Sn layers, Sn bearing metals
Tin - Sn rich bearing metals and white metals, Sn-Cu alloys and Bi-Sn eutectic
Tin and tin alloys - Chemical etching
Tin and tin alloys - Chemical etching
Tin and tin alloys - Darkens primary and eutectic lead in lead rich Pb-Sn alloys
Tin and tin alloys - For etching tin-coated copper and copper alloys
Tin and tin alloys - For etching tin-coated steel
Tin and tin alloys - General use for Sn and Sn alloys
Tin and tin alloys - Grain boundary etch for pure Sn
Tin and tin alloys - High tin bearing metals
Tin and tin alloys - Pure Sn, Sn-Pb, Sn-Cd and Sn-Fe alloys
Tin and tin alloys - Pure tin and Sn-Pb alloys
Tin and tin alloys - Recommended for etching Sn-Sb alloys
Tin and tin alloys - Soldered joints
Tin oxide (SnO2) - Physical etching
Tin oxide (SnO2) - Physical etching
Tin specimens - Chemical etching
Tint etch for Fe-Ni massive martensite - Chemical etching
Tint etch for Mo alloys (Oak Ridge National Laboratory) - Chemical etching
Tint etch for W - Pre-etch with grain boundary etch
Tint etch for lath or plate martensite - Chemical etching
Tint etch for steels - Chemical etching
Tint etch for steels - Chemical etching
Tint etch for steels - Chemical etching
Tint etch of Lienard and Pacque's - For Cu-Al alloys
Titanium - Attack polishing
Titanium - Attack polishing
Titanium - Attack polishing
Titanium - Attack polishing
Titanium - Attack polishing
Titanium - Attack polishing
Titanium - Cathodic etching
Titanium - Chemical etching
Titanium - Chemical etching
Titanium - Chemical etching
Titanium - Chemical etching
Titanium - Chemical etching
Titanium - Chemical etching
Titanium - Chemical polishing
Titanium - Chemical polishing
Titanium - Chemical polishing
Titanium - Chemical polishing
Titanium - Chemical polishing
Titanium - Chemical polishing
Titanium - Chemical thinning
Titanium - Dislocation etching
Titanium - Electrolytic etching
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing
Titanium - Electrolytic polishing and chemical etching
Titanium - Electrolytic thinning
Titanium - Electrolytic thinning
Titanium - Electrolytic thinning by Mirand-Saulnier technique
Titanium - Electrolytic thinning by window technique
Titanium - Electrolytic thinning in RTFE holder
Titanium - Good general-purpose electrolyte
Titanium - Most types of Ti and Ti alloys, Ti-Mn, Ti-V-Cr-Al alloys
Titanium - One of the best electrolyte for universal use
Titanium - Physical etching
Titanium - Physical etching
Titanium - Pure Ti and Ti base alloys
Titanium - Sample preparation procedure
Titanium - Thermal etching
Titanium - Ti alloys
Titanium - Ti and Ti alloys, Grain boundary etchant
Titanium - Ti and Ti base alloys - Tint etching - Precipitates
Titanium - Ti, Ferro Ti, Ti-Al-V-Sn alloys
Titanium - Ti-Al-Sn and Ti-Al-Ni alloys
Titanium - Zr, Ti, U, steels, superalloys
Titanium 500 alloy - Chemical etching
Titanium 600 alloy - Chemical etching
Titanium alloys - Color etching - Alpha titanium grains
Titanium alloys - Color etching
Titanium alloys - Color etching
Titanium alloys - Electrolytic polishing
Titanium alloys - Electrolytic polishing
Titanium alloys - Thermal etching
Titanium alpha-Ti single crystal - Chemical polishing
Titanium and titanium alloys - Chemical etching
Titanium and titanium alloys - Chemical etching
Titanium and titanium alloys - Chemical etching
Titanium and titanium alloys - Chemical polish and etch - For most titanium alloys
Titanium and titanium alloys - Electrolytic polishing
Titanium and titanium alloys - Electrolytic polishing
Titanium and titanium alloys - For Ti-Si alloys
Titanium and titanium alloys - General purpose etch
Titanium and titanium alloys - General purpose etch - For Ti-3Al-8V-6Cr-4Mo-4Zr alloy
Titanium and titanium alloys - General purpose etch - For Ti-8Mn; aged Ti-13V-11Cr-3Al
Titanium and titanium alloys - General purpose etch - For Ti-Al-Zr and Ti-Si alloys
Titanium and titanium alloys - General purpose etch - For most titanium alloys
Titanium and titanium alloys - Nonstaining etch - For most titanium alloys
Titanium and titanium alloys - Removes stain - For most titanium alloys
Titanium and titanium alloys - Reveals alpha case - For most titanium alloys
Titanium and titanium alloys - Reveals hydrides - For unalloyed titanium
Titanium and titanium alloys - Reveals hydrides - For unalloyed titanium
Titanium and titanium alloys - Stains alpha, transformed beta - For alpha-beta Titanium alloys
Titanium boride (TiB2) - For revealing structure of TiB2
Titanium boride TiB2 - Chemical etching
Titanium carbide (TiC) - Chemical and electrolytic etching
Titanium carbide (TiC) - Electrolytic polishing and chemical etching
Titanium carbide (TiC) - Electrolytic thinning
Titanium carbide (TiC) - TiC(0.97)
Titanium carbide (TiC) single crystal - Electrolytic polishing
Titanium diboride (B-Ti(2)) - Chemical etching
Titanium diboride (B-Ti(2)) - Chemical etching
Titanium diboride (B-Ti(2))
Titanium diboride single crystals (B-Ti(2)) - Chemical etching
Titanium dioxide (TiO2) - Chemical etching
Titanium nitride (TiN)-Molybdenum cermets (MoO3) - Chemical etching
Titanium oxide (Rutile-TiO2) - Chemical etching
Titanium silicide (TiSi2) - Chemical etching
Titanium-gallium alloys (Ti-Ti3Ga) - Chemical etching
Tl (0001) wafers - Chemical cleaning
Tl poly crystalline specimens - Chemical etching
Tl specimens - Chemical etching
Tl specimens - Chemical etching
Tl2Se3 and TlSe single crystal - Chemical polishing
Tm single crystal specimens - Thermal etching
Tm-Ag alloys - Chemical etching
Tm-Au alloy - Chemical etching
Tm-Bi system - Chemical etching
Tm-Pd alloys (Approx. Tm3Pd4) - Chemical etching
To detect oxidation in steel - Chemical etching
To detect oxidation in steel - Chemical etching
Tool steels - Chemical etching
Tool steels - Color etching - Colors ferrite grains - Reveals banded structures
Tool steels - Color etching - For Mn, Mn-C, Mn-Cr steels
Tool steels - Color etching - For carbon, alloy and tool steels
Tool steels - Color etching - Colors pearlite and hardened structures of unlloyed steels
Tool steels - Color etching - Colors the martensite in Fe-C alloys
Tool steels - Color etching - For carbon, alloy and Fe-Mn (5-18% Mn) steels
Tool steels - Color etching - For carbon, alloy and manganese steels
Topaz-Al2(SiO4)(OH,F)2 - Etching for defects (etch pits, etc.)
Tri-iodide etchant - Au specimens and thin films - Chemical etching
Tri-iodine etchant - Au thin film deposits as a multilayer Au/Ni/Au/TiW/Si(100) substrate - Chemical etching
Tri-iodine etchant - AuGe (13%) alloy ribbon - Chemical etching
Tucker's etchant - 5052 Al alloy - Chemical etching
Tucker's etchant I - Pure Al, Mn-Al, Si-Al, Mg-Al, Mg-Si-Al alloys
Tucker's etchant II - For Al alloys
Tungsten boride - Attack polishing
Tungsten - Attack polishing
Tungsten - Attack polishing
Tungsten - Attack polishing
Tungsten - Cathodic etching
Tungsten - Chemical etching
Tungsten - Chemical etching
Tungsten - Chemical etching
Tungsten - Chemo-mechanical polishing
Tungsten - Cr, Mo, Mo-Cr alloys (up to 80% Cr)
Tungsten - Dislocation etching
Tungsten - Dislocation etching
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing
Tungsten - Electrolytic polishing and etching
Tungsten - Electrolytic thinning
Tungsten - Electrolytic thinning
Tungsten - Electrolytic thinning by window technique
Tungsten - Electromechanical polishing
Tungsten - Eutectic W-Co alloys
Tungsten - For removing slip lines and twins
Tungsten - For sub grain boundaries and slip lines
Tungsten - Mo and Mo-Ni alloys, W and W alloys
Tungsten - Mo, W and their alloys
Tungsten - Mo, W and their alloys
Tungsten - Mo, W and their alloys
Tungsten - Tint etching
Tungsten - W and W base alloys
Tungsten - W and W base alloys
Tungsten - W and W base alloys. Mo and Mo base alloys
Tungsten - W and W base alloys. Ta na Ta base alloys
Tungsten - W-Co alloys containing 10-70% W
Tungsten alloys - Electrolytic polishing
Tungsten alloys - Electrolytic polishing
Tungsten and tungsten alloys - Chemical etching
Tungsten and tungsten alloys - Chemical etching
Tungsten and tungsten alloys - Chemical etching
Tungsten and tungsten alloys - W-Co alloys with 10-70% W
Tungsten and tungsten alloys - W-Co alloys with 10-70% W
Tungsten and tungsten alloys - W-Co alloys with eutectic compostion (cca 46% W)
Tungsten single crystal - Electrolytic polishing
Tungsten single crystal - Electrolytic polishing, chemical polishing
Tungsten specimens - Chemical etching
Tungsten specimens - Chemical etching
Tungsten specimens - Chemical etching
Tungsten, color etchant - Chemical etching
Tungsten-2.8 vol.% ThO2 alloy - Electrolytic thinning
Tungsten-Silicon alloys (WSi2) - Chemical etching
Tungsten-Wire - Electrolytic polishing
Type 300 maraging steel - Fe, 18.5% Ni, 8.75% Co, 4.9% Mo, 0.65% Ti, max. 0.03% C, 0.1% Al
Type 304 L stainless steel - Fe-0.03C-19Cr-10Ni-0/2Mn-0/1Si
Type 304 and 304L stainless steels - Fe-0.03/0.06C-18Cr-9/10Ni-1/1.2Mn
Type 304 stainless heat resisting steel - Fe-0.1C-18Cr-8.5Ni-1.4Mn-0.5Si
Type 304 stainless steel - Chemical etching
Type 304 stainless steel - Electrolytic etching
Type 304 stainless steel - Electrolytic thinning
Type 304 stainless steel - Fe-0.07C-18.8Cr-9.4Ni-0.8Mn-0.65Si
Type 304 stainless steel - Fe-18.6Cr-9.5Ni-1.3Mn-0.35Mo-0.44Si-0.25Cu-0.04C
Type 304 stainless steel - Fe-18Cr-8.6Ni-1.2Mn-0.2Co-0.1Cu-0.1Mo-0.1W0-0.04C
Type 304 stainless steel - Jet electrolytic polishing
Type 304 stainless steel - Jet thinning
Type 304 stainless steel - Twin jet electrolytic thinning
Type 310 stainless steel - Fe-25.5Cr-20Ni-0.04C-0.7Si-0.4Mn
Type 316 stainless steel - Chemical etching - General microstructure
Type 316 stainless steel - Chemical etching
Type 316 stainless steel - Fe-0.02/0.04C-1.8/2.5Mn-17/18Cr-12/12.5Ni-2.25Mo-0.4/0.8Si
Type 316 stainless steel - Fe-16/17Cr-10/12Ni-2.2/2.5Mo-0.45/1.7Mn-0.2/0.4Si-0.04/0.07C
Type 4140 steel - 0.4C-0.8Mn-1Cr-0.3Mo
Type 430 stainless steel - Fe-16Cr-0.06C-0.4Si-0.4Mn
Type 800 stainless steel - Fe-21.4Cr-33.2Ni-0.5Ti-0.5Si-0.6Mn-0.3Al-0.015C
Type AISI 316 stainless steel - Fe-18Cr-8Ni-2.5Mo
Type AISI 316 stainless steel - Twin jet electrolytic polishing
Type I glass-70% SiO2 - 23% B2O3 - 7% Na2O
Type II glass - 81% SiO2, 12.6% B2O3, 3.9% Na2O, 2.4% Al2O3
U alloy and 2% Zr - Electrolytic etching
U alloys (U-N-Mo alloys) - Physical etching
U alloys - Chemical etching
U alloys - Chemical etching
U alloys - Electrolytic etching
U alloys and 10% Nb alloys - Chemical etching
U alloys and 5% fission products - Electrolytic etching
U and 5% fission products - Chemical etching
U and U alloy - Anodising etching solution
U and U alloys - Electrolytic etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and U alloys - Electrolytic polishing - Dislocation etching
U and alloys - Chemical etching
U and alloys - Electrolytic etching
U and alloys - Electrolytic etching
U and alloys - Electrolytic etching
U beryllides and U-Zr and U-Nb alloys - Chemical etching
U carbide - Chemical etching
U silicides, U-Zr, U-Ti, U-Zr-Mo alloys - Chemical etching
U specimens - Chemical cleaning
U specimens - Chemical cleaning
U specimens - Chemical polishing
U specimens - Chemical polishing
U specimens - Chemical polishing
U specimens - Electrolytic polishing
U specimens - Electrolytic polishing
U(C, N) specimens - Ceramic compunds
U(C, O) specimens - Ceramic compunds
U, Pu - Chemical etching
U, Pu, Am - Chemical etching
U-10Nb alloys - Chemical etching
U-2% Zr alloy - Sample preparation procedure
U-Al alloys - Chemical etching
U-Al alloys - Chemical etching
U-Al alloys - Chemical etching and electrolytic etching
U-Al-Ni system - UAl2-NiAl section
U-Be alloys, U-Zr and U-Nb alloys - Chemical etching
U-C alloys - Electrolytic etching
U-C alloys - Electrolytic etching
U-Co alloys - Physical etching
U-Co-Al alloy - UCo2-UAl3 section
U-Cu system - Electrolytic polishing
U-Fe alloys - Chemical and electrolytic etching
U-Fe-C alloys - Electrolytic polishing
U-Mn system - Electrolytic polishing
U-Mo alloy (16 wt.% Mo) - Electrolytic etching
U-Mo alloy (5 at.% Mo) - Sample preparation
U-Mo alloy - Electrolytic thinning by Mirand-Saulnier technique
U-Mo alloys - Electrolytic etching and polishing
U-Mo alloys - Physical etching
U-Mo and U-Zr alloys - Chemical etching
U-Mo and U-Zr alloys with stabilized gamma phase - Chemical etching
U-Mo-Ti alloys - Attack polishing
U-N-P alloy - UN-UP pseudobinary
U-Nb alloy - Cathodic etching
U-Nb alloy - Sample preparation
U-Nb alloys - Potentiostatic etching
U-Nb-H alloys - Chemical etching
U-Nb-Mo alloy - Cathodic etching
U-Nb-Zr alloy - Alloy with 7.5 Nb-2.5Zr
U-Ni-Zr alloy (7.5% U, 2.5% Zr) - Electrolytic polishing and etching
U-Pd alloys (Approx. 55 at.% Pd) - Chemical etching
U-Pu alloys - Electrolytic polishing
U-Re alloys - Chemical and Electrolytic etching
U-Si alloy - Cathodic etching
U-Si alloys - Electrolytic etching
U-Ti alloys - Chemical etching
U-Zr alloy - Electrolytic polishing
U-Zr alloys (Zr rich) - Electrolytic polishing
U-Zr alloys - Chemical etching
U-Zr alloys - Electrolytic etching
U-Zr alloys - Electrolytic polishing
U2C3+UC2 specimens - Ceramic compunds
U3N4 specimens - Chemical etching
U3Si alloys - Chemical etching
U4O9 - Chemical etching
UB4, UB2 and UB12 specimens - Chemical etching
UB4, UB2, and UB specimens - Chemical etching
UC (001) wafers - Electrolytic jet thinning
UC - Dislocation etching
UC single crystal wafers - Chemical etching
UC specimens - Chemical etching
UC+PuN specimens - Ceramic compunds
UC+PuN specimens - Ceramic compunds
UC+ZrC - Ceramic compunds
UC+ZrC - Ceramic compunds
UC, U(C,O) x U(C,N), UC-ZrC mixtures, UC-UC2, UC2-U2C3 mixtures,(U,Pu)C C-rich
UC2+UC - Ceramic compunds
UN (001) wafers - Electrolytic jet thinning
UN+U(N, O)+U2N3 - Ceramic compunds
UN+U2N3 - Ceramic compunds
UN-PuN, UO2-PuO2 and irradiated UO2-PuO2 alloys - Chemical etching
UO2 + ZrO2 - Chemical etching
UO2 - Chemical etching
UO2 - Dislocation etching
UO2 - Electrolytic etching
UO2 - Thermal etching
UO2 and UO2CeO2 - Chemical etching
UO2 specimens - Chemical etching
UO2 specimens - Chemical etching
UO2 specimens - Electrolytic polishing
UO2 x Th(x)U(y)O2, PuO2 cast, PuO2 (gamma, sintered) - Chemical ecthing
UO2, U3Si - Attack polishing
UO2, UO2-CeO2, UO2-U4O9, and UO2-PuO2 mixtures - Chemical ecthing
UO2, UO2CeO2 - Attack polishing
UO2, carbide-coated graphite, pyrolitic graphite - Attack polishing
UO2-PuO2 mixtures - Chemical ecthing
UP - Chemical etching
US (001) wafers - Electrolytic jet thinning
US - Chemical etching
US specimens - Chemical etching
UTi single crystal specimens - Electrolytic polishing
Udimet 500 alloy - Ni-15/20Cr-13/20Co-3/5Mo-2.5/3.25Al-0/4Fe
Udimet 700 - Chemical etching
Udimet 700 - Chemical etching
Udimet 700 - Electrolytic polishing, chemical etching
Udimet 700 - Stain etch for inclusions
Udimet 700 alloy - Ni-18.5Co-13Cr-3.5Ti-4.3Al-5.3Mo-0.08C-0.03B
Udimet 700 and Rene 41 - Chemical etching
Unalloyed and low-alloy steels, martensitic and bainitic microstructures, ferritic Cr steels, manganese steels, soldered joints with brass solder - Chemical etching
Unalloyed steels - Electrolytic polishing
Unalloyed steels - Electrolytic polishing
Unalloyed steels - Electrolytic polishing
Unalloyed steels - Electrolytic polishing
Untempered high-Si steels - Electrolytic etching
Uranium - Attack polishing
Uranium - Attack polishing
Uranium - Attack polishing
Uranium - Cathodic etching
Uranium - Cathodic etching
Uranium - Cathodic etching
Uranium - Chemical etching
Uranium - Chemical etching
Uranium - Chemical thinning and electrolytic polishing
Uranium - Electrolytic etching
Uranium - Electrolytic etching
Uranium - Electrolytic etching
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing
Uranium - Electrolytic polishing and etching
Uranium - Electrolytic thinning
Uranium - Electrolytic thinning
Uranium - Electrolytic thinning
Uranium - Electrolytic thinning
Uranium - Electrolytic thinning
Uranium - Electrolytic thinning by Bollmann technique
Uranium - Electrolytic thinning by Mirand-Saulnier technique
Uranium - Electrolytic thinning in PTFE holder
Uranium - Gamma phase stablized U-Mo and U-Zr alloys
Uranium - Good general-purpose electrolyte
Uranium - One of the best electrolyte for universal use
Uranium - Pure U and Th
Uranium - U alloys
Uranium - U and most U alloys
Uranium - U silicides
Uranium - U-Al alloys
Uranium - U-Be alloys, U-beryllides, U-Zr, and U-Nb alloys
Uranium - Zr, Ti, U, steels, superalloys
Uranium alloys - Color etching - Electrolytic etching
Uranium alloys - Color etching - Physical etching
Uranium alloys - Electrolytic polishing
Uranium and uranium alloys - Electrolytic etching
Uranium carbide (UC) - Chemical etching
Uranium carbide (UC) - Electrolytic polishing
Uranium carbide (UC) - Electrolytic polishing and etching
Uranium carbide (UC) - Electrolytic thinning
Uranium carbide (UC) - Physical etching
Uranium carbide (UC)-zirconium carbide (ZrC) system - Chemical etching
Uranium carbide (UC)-zirconium carbide (ZrC) system - Chemical etching
Uranium carbide-Lanthanum alloys
Uranium carbide-neodymium alloys (C-Nd-U)
Uranium carbides (UC, U2C3, UC2) - Chemical etching
Uranium dioxide (UO2) - A suitable etching method for determining grain size
Uranium dioxide (UO2) - Cathodic etching
Uranium dioxide (UO2) - Chemical etching
Uranium dioxide (UO2) - Chemical etching
Uranium dioxide (UO2) - Chemical etching
Uranium dioxide (UO2) - Chemical etching
Uranium dioxide (UO2) - Chemical etching
Uranium dioxide (UO2) - Chemical etching
Uranium dioxide (UO2) - Chemical thinning
Uranium dioxide (UO2) - Electrolytic thinning
Uranium dioxide (UO2) and higher oxides - Chemical etching
Uranium dioxide (UO2) single crystals - Used mainly for (111) faces but can be used for (100) faces
Uranium dioxide (UO2, irradiated) - Chemical etching
Uranium dioxide (UO2, irradiated) - Chemical etching
Uranium dioxide (UO2, irradiated) - Chemical etching
Uranium dioxide-carbon-nitrogen system - Chemical etching
Uranium dioxide-thoria system (10% UO4) - Chemical etching
Uranium nitride (UN) - Chemical etching
Uranium nitride (UN) - Chemical etching
Uranium nitride (UN) - Electrolytic polishing
Uranium oxide (U3O8) - Chemical etching
Uranium oxide (U4O9) - Chemical etching
Uranium oxide (UO2) - Chemical etching
Uranium oxide (UO2) - Chemical etching
Uranium oxide (UO2) - Electrolytic etching
Uranium oxide (UO2) - Electrolytic polishing
Uranium oxide (UO2) - Physical etching
Uranium oxide (UO2) - Physical etching
Uranium oxide (UO2) - Physical etching
Uranium phosphide - Chemical etching
Uranium phosphide - Chemical etching
Uranium silicon alloys - Chemical etching
Uranium silicon alloys - Distinguishes U3Si2, U3Si, alpha U and UC
Uranium silicon alloys - Distinguishes U3Si2, U3Si, alpha U and UC
Uranium silicon alloys - For U2Si2, U3Si, alpha U and UC
Uranium sulphide (US) - Chemical etching
Uranium-gallium alloys (U-Ga) - Chemical etching
Uranium-molybdenum alloys - Chemical etching
Uranium-osmium alloys (U-Os) - Chemical and electrolytic etching
V alloys - Chemical etching
V alloys - Chemical etching
V and V alloys - Electrolytic polishing - Dislocation etching
V and V alloys - Electrolytic polishing - Dislocation etching
V and V alloys - Electrolytic polishing - Dislocation etching
V and V alloys - Electrolytic polishing - Dislocation etching
V and alloys - Chemical etching
V and alloys - Electrolytic etching
V modified AISI 4330 steel - Fe-0.32C-0.28Si-0.61Mn-2.24Ni-0.43Cr-0.6Mn-0.1V
V poly-wire - Chemical etching
V single crystal and polycrystalline spheres - Thermal forming
V specimens - Chemical etching
V specimens - Chemical etching
V specimens - Chemical polishing/etching
V specimens - Electrolytic polishing
V specimens - Electrolytic polishing/thinning
V thin films evaporated on silicon substrates - Chemical etching
V-C alloys - Electrolytic polishing and etching
V-C system - Electrolytic thinning
V-C system - Etching for etch pits
V-C system - VC(0.76) single crystals
V-Ga, V-Si, V-Al alloys - Electrolytic etching
V-H system - Chemical polishing
V-H system - Chemical thinning
V-Ni alloys - Chemical etching
V-O alloys (< 10 at.% O) - Electrolytic polishing
V-O alloys - Attack polishing
V-O system (V to VO section) - Chemical etching
V-O system - Electrolytic and chemical polishing, chemical etching
V-Pt alloys - Electrolytic etching
V-Zr alloys - Chemical etching
V2A etchant
V3Ge and V3Si - Chemical etching
V3Si (111) and (100) wafers - Chemical polishing
V3Si (111) wafers - Electrolytic polishing
V3Si (111), (100) wafers - Dislocation etching
V3Si and V3Ge - Chemical polishing
V3Si specimens - Chemical cleaning
VAl3 deposited on silicon, (001) substrates - Chemical cleaning/etching
VB2 and VB specimens - Chemical etching
VB2 and VB specimens - Chemical etching
VB2 and VB specimens - Chemical etching
VBr2 single crystals - Chemical polishing/etching
VC (1OO) single crystal and polyerystalline specimens - Chemical etching
VC (1OO) single crystal ingots - Electrolytic etching
VC - Chemical etching
VC specimens - Molten flux etching
VC-Co system - Chemical etching
VGa single crystal filaments - Chemical etching
VSi2 thin films
Vanadium - Attack polishing
Vanadium - Attack polishing
Vanadium - Chemical polishing
Vanadium - Chemical polishing
Vanadium - Chemical polishing
Vanadium - Cr and Cr base alloys. Fe-Cr alloys and V
Vanadium - Electrolytic etching
Vanadium - Electrolytic etching
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic polishing
Vanadium - Electrolytic thinning
Vanadium - Electrolytic thinning and jet etching
Vanadium - Electrolytic-mechanical polishing
Vanadium - Mo, Ta, Nb, Mo-Ti alloys, Ta-Nb alloys, Pure V and V base alloys
Vanadium - V and V base alloys
Vanadium - V and V base alloys
Vanadium alloys - For etching V-Ti3, V-Ti15, V-Ti 20--Nb10 alloys
Vanadium carbide (VC) - Dislocation etching
Vanadium carbide (VC0.84) - Chemical etching
Vanadium oxide-lanthanum oxide system - V2O3-La2O3 system
Vanadium oxide-phosphoric oxide glass (VO2-V2O5-P2O5) - Chemical etching
Vanadium oxide-phosphoric oxide-boric oxide glass - VO2 10-14 mol.%/V2O5 69-73%, P2O5 12-16%, B2O3 up to 9%
Vanadium silicide (V3Si) - Electrolytic polishing
Vanadium single crystal - Electrolytic polishing and etching
Vanadium specimens - Chemical etching
Vanadium-gallium alloys (Approx.V3Ga) - Etches V6Ga5 and V solid solution, but leaves V3Ga
Vanadium-gallium alloys (Approx.V3Ga)
Vanadium-gallium alloys (V3Ga) - Electrolytic thinning
Vanadium-nitrogen system (V-N) - Chemical etching
Vanadium-nitrogen system (V-N) - Electrolytic polishing
Vanadium-technetium alloys (V-Tc) - Electrolytic polishing and etching
Vapour deposited Silicon Carbide (SiC) - Thermal etching
Vegesack's etchant - Steel specimens - To reveal lead inclusions
Velguth's etchant - X40 or No. 31 alloys - Chemical etching
Vermilyea's anodizing solution for Ta - Electrolytic etching
Vilella etchant - Stainless steel castings - General structure
Vilella's etchant - Al and Al alloys - Chemical etching
Vilella's etchant - Carbon and alloy steels - For contrast etching
Vilella's etchant - Carbon and alloy steels with medium carbon content - For austenite grain boundaries
Vilella's etchant - Cast irons - High chromium irons
Vilella's etchant - Cu-Pb alloys - Chemical etching
Vilella's etchant - Duplex stainless steel - Sigma phase
Vilella's etchant - Ferritic Cr steels, austenitic CrNi steels, austenitic cast alloys, Pd and its alloys
Vilella's etchant - High alloy steels
Vilella's etchant - In and lean alloys - Chemical etching
Vilella's etchant - In-Cd alloys - Chemical ecthing
Vilella's etchant - Indium specimens - Chemical etching
Vilella's etchant - Iron and steels - Chemical etching
Vilella's etchant - Iron and steels - Chemical etching
Vilella's etchant - Nickel superalloys - Production of thin foils for electron microscopy
Vilella's etchant - Pd dental alloys, Pd alloys with Al, Os, In, Sn, Fe, and Cu - Chemical etching
Vilella's etchant - Stainless steels - Chemical etching
Vilella's etchant - Stainless steels
Vilella's etchant - Steels, high carbon and alloys types - Chemical etching
Vilella's etchant - Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 825, general structure
Vilella's etchant - Wrought stainless steels - General structure
Vilella's etchant - Zirconium specimens - Chemical etching
Vilella's etchant, modified - N-155 alloy - Chemical etching
Vitallium alloys - Electrolytic etching
Vogel's etchant - Si (111) and other oriented wafers - Dislocation etching
Vycor 7913 glass - Chemical etching
Vycor 7913 glass - Chemical etching
Vycor 7913 glass - Chemical etching
W (001) wafers - Chemical etching
W (001) wafers and other orientations - Acid thinning
W (001) wafers and single crystals - Electrolytic polishing
W (111) wafers as deposited thin film - Ionized gas etching
W - Chemical-Mechanical polishing
W - Electrolytic lapping
W and W alloys - Electrolytic polishing - Dislocation etching
W and W alloys - Electrolytic polishing - Dislocation etching
W and W alloys - Electrolytic polishing - Dislocation etching
W and W alloys - Electrolytic polishing - Dislocation etching
W and alloys - Chemical etching
W and alloys - Chemical etching
W and alloys - Chemical etching
W and alloys - Chemical etching
W and alloys - Electrolytic etching
W and alloys - Electrolytic etching
W and alloys - Electrolytic etching
W discs of pressed powder - Chemical cleaning
W etchant - LiF (100) wafers - Chemical etching
W single crystal wafers - Chemical etching
W specimens - Alcohol cleaning
W specimens - Chemical cleaning
W specimens - Chemical cleaning
W specimens - Chemical etching
W specimens - Chemical etching
W specimens - Chemical etching
W specimens - Chemical etching
W specimens - Chemical etching
W specimens - Chemical etching
W specimens - Chemical polishing
W specimens - Chmical cleaning or electrolytic polishing
W specimens - Electrolytic polishing
W specimens - Keytone cleaning
W specimens and W thin film deposits - Chemical etching
W specimens and parts - Chemical cleaning
W specimens as wire, W single crystal wafers - Gas, forming
W specimens used for electroplating - Chemical polishing
W specimens used for electroplating - Chemical polishing
W specimens used for electroplating - Chemical polishing
W specimens used for electroplating - Chemical polishing
W specimens used for electroplating - Chemical polishing
W thin film evaporated on silicon (100) substrates - Ionized gas etching
W thin film evaporation in vacuum systems - Chemical etching
W thin films - Chemical etching
W thin films - Chemical etching
W thin films - Chemical etching
W thin films - Ionized gas etching
W thin films deposited by sputtering - Ionized gas entrapment
W wire 0.015-0.025 diameter - Chemical cleaning
W wires and whiskers - Electrolytic polishing
W-10% Co specimen - For electron and optical microscopy
W-3% Re alloy - Chemical etching
W-C system - Chemical etching
W-Co alloys - Chemical etching
W-Co alloys ith 10-70% W - Chemical etching
W-Hf alloys - Chemical etching
W-Mo-Os alloys - Chemical etching
W-Ni-Fe alloys - Electrolytic polishing
W-Re alloy (23.4% Re + 0.3% HfC) - Electrolytic thinning
W-Re alloy (25% Re) - Electrolytic polishing and chemical etching
W-Re alloy (3% Re) - Chemical etching
W-Re alloys (5, 25% Re) - Electrolytic polishing
W-Re alloys (9, 24% Re) - Electrolytic thinning
W-Re-Hf-C alloy - 4 at.% Re, 0.2-0.8 at.% Hf, up to 1.35 at.% C
W-Sc alloys - Chemical etching
W-Ta alloy (3% Ta) - Electrolytic thinning
W-Th alloys - Chemical etching
W-Th alloys - Chemical etching
W-Ti-B alloys - Chemical etching
W-Y alloys - Chemical etching
W2O3(PO4)2 as an amorphous glassy thin film - Chemical etching
WAg etchant - Ge (111) wafers - Chemical etching
WAg etchant - Ge hemispheres - Chemical etching
WB2 and other tungsten borides - Chemical etching
WB2 and other tungsten borides - Chemical etching
WB2, W2B2, W2B5 - Chemical etching
WC - Chemical etching
WC - Chemical etching
WC - Chemical etching
WC single crystal specimens - Thermal etching
WC, Mo2C, TiC, or Ni in sintered carbides - Chemical etching
WC, TiC, TaC, and Co in sintered carbides - Chemical etching
WC-6% Co alloy - For revealing the microstructure of the WC-Co material
WC-Co - Chemical etching
WC-Co - Chemical etching
WC-Co - Chemical etching
WC-Co - Good etchant for WC crystals - Electrolytic etching
WC-Co - Suited for SEM examination - Electrolytic etching
WC-Co and complex sintered carbides - Chemical etching
WC-Co or Ni matrix with Mo2C, TiC, WC2, TaC - Chemical etching
WC-Co sintered carbides - Chemical etching
WC-Co system - Electrolytic thinning
WC-Co, WC-TiC-TaC-Co - Chemical etching
WC-Co, reveals Co - Electrolytic etching
WC-Mo2C-TiC-Ni - Chemical etching
WC-Mo2C-TiC-Ni cemented carbides
WC-Ti-Ta, NbC-Co - Physical etching
WC-TiC-NbC-Co - Chemical etching
WII etchant - Cr-Ni steels - Chemical etching
WO(x) (x=3) thin film
WO2 oxide specimens - Chemical etching
WO3 oxide specimens - Chemical etching
WO3 thin film deposited on 2100 A SnO2 on a glass substrate - Chemical etching
WRh (2%) and (6%), (100) wafers - Electrolytic polishing
WSe2 single crystal specimens - Solvent cleaning
WSi2 thin films
WSi2 thin films - Chemical etching
WSi2 thin films grown on silicon substrates - Ionized gas etching
Wafer cleaning - All wafers
Walker's etchant
Walker's etchant - Ni alloys
Walker's etchant - Rene 95 alloy
Walker's etchant - Rene 95 alloy - Chemical ecthing
Walker's etchant - Rene 95 alloy - Chemical etching
Wallner's etchant - Corrosion-resistant CrNi steels
Warekois etchant - ZnTe (111) wafers - Chemical etching
Waspaloy - 59.2Ni-13.2Co-18.8Cr-4.1Mo-1.2Al-3.0Ti-0.04C by weight
Waspaloy - Twin jet polishing mehod
Wassermann's etchant - For Mg-Al
Wassermann's etchant - Mg-7.5% Al-2.5% Zn alloy - Chemical etching
Wassermann's etchant - Mg-Al alloys
Waterbury's etchant
Waterbury's etchant - Silver-Cadmium (Ag-Cd) - Electric contact material
Waterbury's etchant - Silver-Cadmium (Ag-Cd) brazed to brass - Electric contact material
Waterbury's etchant - Silver-Copper (Ag-Cu) - Electric contact material
Waterbury's etchant - Silver-Graphite (Ag-C) - Electric contact material
Waterless Kallings's etchant - Nickel superalloy 718 - Chemical etching
Weck's color etchant - Etchant/procedure to examine for overheated titanium - Chemical etching
Weck's etchant - Pure Ti and Ti alloys
Weck's etchant - Pure Ti and Ti alloys - Chemical etching
Weck's tint etch for alpha Ti - Chemical etching
Weck's tint etch for alpha Ti alloys - Chemical etching
Weck's tint etchant - Ti and alloys - Tint etching
Weck's tint etchant - Ti and alloys - Tint etching
Weld etch inspection of AISI 4130 steel - Chemical etching
Westinghouse W Ag etchant - Ge and Ge alloys - Chemical etching
Westinghouse silver etchant - Germanium - Dislocation etching
Westinghouse silver etchant WAG - Ge
Westinghouse's silver etchant WAG - Germanium - Etch pits etching
White cast irons - Color etchant
White's etchant - Ge (111) wafers - Chemical etching
White's etchant - Si (100) cleaved wafers - Chemical polishing
White's etchant - Si (111) wafers, n- and p-type - Chemical thinning
White's etchant - Si (111) wafers, n-type, 130 Ohm cm resistivity - Chemical sphere polishing
Whiteley's etchant - Method for coloring sulfides - Iron and steels - Chemical etching
Wiliams-Blackburn's etchant - Ti-Mo-Al-Cr alloy - Ti-4.5Al-5Mo-1.5Cr
Williams's solution - For Ti and alloys - Electrolytic polishing
Worner and Worner's etchant - Th
Worner and Worner's etchant - Thallium specimens - Chemical polishing
Wright's etchant - For Si stacking faults dislocations
Wright's etchant - Si (100), (111), p- and n-type, 0.2-20 Ohm cm resistivity wafers - Dislocation etching
Wright-Jenkins etchant - Dislocation etching
Wrought Fe-Ni-Cr heat resisting alloy - AISI 660, general structure
Wrought Fe-Ni-Cr heat resisting alloy - AISI 660, general structure; may stain or pit
Wrought Fe-Ni-Cr heat resisting alloy - U-700 (AISI 687) - General structure; grain boundaries
Wrought Fe-Ni-Cr heat resisting alloys - AISI 660 steel , general structure
Wrought Fe-Ni-Cr heat resisting alloys - Hastelloy C, general structure
Wrought Fe-Ni-Cr heat resisting alloys - Hastelloy W, general structure
Wrought Fe-Ni-Cr heat resisting alloys - Hastelloy X (AISI 680), general structure
Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 800, carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 800, general structure; carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 800, grain boundaries
Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 800, preferential attack at grain boundaries
Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 825, grain boundaries; carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Incoloy 825, grain boundaries; carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 600 and 601 - General structure
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 600 and 601 - General structure; carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 600 and 601 - General structure; grain boundaries; carbide
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 600 and 601, excellent for revealing carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 600 and 601- Grain boundary contrast
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 625
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 625 - Grain boundaries
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 625 - Grain boundary films
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 625, general structure
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 625, general structure; grain boundaries
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 706 and alloy 718
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 706 and alloy 718 - General structure; microsegregation
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 706 and alloy 718 - General structure; precipitate phases
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 706 and alloy 718 - Good for general structure and phase outline; grain boundaries
Wrought Fe-Ni-Cr heat resisting alloys - Inconel 706 and alloy 718 - Grain boundary films
Wrought Fe-Ni-Cr heat resisting alloys - Inconel X-750 (AISI 688) - Excellent for showing details of overaged gamma prime
Wrought Fe-Ni-Cr heat resisting alloys - Inconel X-750 (AISI 688) - Good for revealing grain boundaries and carbide particles
Wrought Fe-Ni-Cr heat resisting alloys - Inconel X-750 (AISI 688), general structure
Wrought Fe-Ni-Cr heat resisting alloys - Inconel X-750 (AISI 688), grain boundaries; carbide
Wrought Fe-Ni-Cr heat resisting alloys - Inconel X-750 (AISI 688)- General structure; microsegregation
Wrought Fe-Ni-Cr heat resisting alloys - RA 330, for etch pitting
Wrought Fe-Ni-Cr heat resisting alloys - RA 330, general structure; precipitates
Wrought Fe-Ni-Cr heat resisting alloys - Waspaloy (AISI 685) - General structure
Wrought Fe-Ni-Cr heat resisting alloys - Waspaloy (AISI 685) - General structure
Wrought Fe-Ni-Cr heat resisting alloys - Waspaloy (AISI 685) - General structure
Wrought Mg alloys - Chemical etching
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure
Wrought stainless steels - General structure, carbides
Wrought stainless steels - General structure, sigma phase
Wrought stainless steels - General structure, sigma phase
X-l114 etchant - Ge (111) wafers - Chemical polishing
X22CrMoV12.1 steel - Chemical etching
X40 or No. 31 alloys - Chemical etching
X41CrMoV5-1 steel - Chemical etching
X41CrMoV5-1 steel - Chemical etching
X5CrNiTi26.6 steel - Chemical and Electrolytic etching
Y specimens - Chemical etching
Y-Ag alloys - Chemical etching
Y-Al alloys - Electrolytic polishing
Y-Al-C alloys - Chemical etching
Y-Bi system - Chemical etching
Y-C system - Electrolytic polishing
Y-Cd system - Chemical etching
Y-Cd-Zn alloy - Chemcial etching
Y-Fe-Al garnet (Y4Fe4AlO12) - Chemical etching
Y-Gd-Tm-Ga-Fe garnet - Chemical etching for etch pits
Y-Ge system - Chemical ecthing
Y-Hf alloy - Chemical etching
Y-N system - Up to 5 at.% N
Y-O system (up to 15. at.% O2) - Chemical ecthing
Y-Pb system - Chemical etching
Y-Pd alloys (approx. Y3Pd4) - Chemical etching
Y-Sb alloy - Pysical etching
Y-Ta alloys - Chemical etching
Y-Ta alloys - Chemical etching
Y-Ti alloy - Chemical etching
Y-Ti, Y-Zr and Y-Hf alloys - M-etch - Chemical etching
Y-V alloys - Chemical etching
Y-Zr alloy - Chemical etching
Y2Ga7O12 single crystals - Chemical cleaning
Y2O3 + ZrO2 specimens - Chemical etching
Y2O3 x ThO2 - Chemical etching
Y2O5 - Dislocation etching
Y3Al5O12 (YAG) (110) wafers - Chemical etching
Y3Fe5O12 (110) wafers - Chemical etching
Y3Fe5O12 (111) wafers - Chemical etching
Y3Fe5O12 (YIG) single crystal - Chemical cleaning
Y3Fe5O12 (YIG) single crystal spheres - Abrasive polishing
Y3Fe5O12 - Dislocation etching
Y3Fe5O12 and Y3Fe4AlO12 - Chemical etching
Y5Fe5O12 (YIG) (0001) wafer
YBCO superconducting material - Sample preparation
YBa2Cu3O7 - For observation of grain boundaries, twain boundaries and cracks
Yb single crystal specimens - Chemical etching
Yb-Ag alloys - Chemical etching
Yb-Ag alloys - Chemical etching
Yb-Al alloys - Polishing
Yb-Au alloys - Chemical etching
Yb-Bi system - Chemical etching
Yb-In alloys - Chemical and eltrolytical etching
Yb-Mg system - Chemical etching
Yb-Ni system - Chemical etching
Yb-Pb system - Chemical etching
Yb-Pd alloys (Approx. Yb3Pd4) - Chemical etching
Yittria dispersed Nichrome - (Cr-Ni-O-Y)-Ni-20Cr-0.2/1.1Y2O3
Young's etchant - For etch pits on Al
Ytterbium - Electrolytic polishing
Ytterbium - Electrolytic thinning
Yttrium - Chemical etching
Yttrium - Electrolytic polishing
Yttrium - Electrolytic polishing
Yttrium iron garnet (Y3Fe5O12) - Chemical etching
Yttrium iron garnet (Y3Fe5O12) - Chemical etching
Yttrium oxide (Y2O3) - Chemical etching
Yttrium oxide (Y2O3) - Dislocation etching
Yttrium silicate (Y5Si3Ox) - Chemical etching
Yttrium-aluminium garnets (Nd doped) - Chemical polishing
Yttrium-aluminium garnets - Chemical etching
Yttrium-aluminium garnets - Chemical polishing
Yttrium-niobium (Y-Nb) alloy - Nb rich alloys
Yttrium-niobium (Y-Nb) alloys - Chemical etching
Yttrium-niobium (Y-Nb) alloys - Chemical etching
Yttrium-ortoaluminate (YAlO2) - Chemical etching
ZIP's etchant - Inconel 617 - Chemical etching
Zicronium carbide (ZrC) - Etch pits on (100) planes
Zinc (99.99%) - Dislocation etching
Zinc (dilute alloys) - Dislocation etching
Zinc - A cellular structure is shown in Zn single crystals by etching in this solution
Zinc - An extremely useful electrolyte for certain applications, but dangerous
Zinc - Chemical etching
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing
Zinc - Chemical polishing and etching
Zinc - Dislocation etching
Zinc - Dislocation etching
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic polishing
Zinc - Electrolytic thinning
Zinc - Electrolytic thinning by window technique
Zinc - Electrolytic thinning by window technique
Zinc - Etch pits etching
Zinc - Fe, Pb, Mg, Cu, and Ni-Zn alloys
Zinc - Fiber structure in extruded Zn alloys
Zinc - For most types of Zn and Zn alloys, especially for rolled Zn containing Pb and Zn-Cu alloys
Zinc - Ion beam etching
Zinc - Physical etching
Zinc - Pure and low alloy Zn
Zinc - Technically pure Zn, Zn-Co and Zn-Cu alloys, generally for low alloy Zn
Zinc - Tint etching of Zn and low alloy Zn
Zinc - Zn alloys with metals of the iron group, Zn platings
Zinc - Zn alloys with much nobler constituents, for example, Cu, Ag, Au
Zinc - Zn and Zn rich alloys, Zn-Cu-Al alloys
Zinc - Zn-Cu alloys to distinguish between gamma and epsilon phase
Zinc - Zn-Fe layers of galvanized steel or ferrous materials
Zinc alloys - Electrolytic polishing
Zinc and zinc alloys - Chemical etching
Zinc and zinc alloys - Chemical etching
Zinc and zinc alloys - Chemical etching
Zinc and zinc alloys - Chemical etching
Zinc and zinc alloys - Chemical etching
Zinc and zinc alloys - For rolled Zn-Cu alloys
Zinc and zinc alloys - For zinc and zinc die-casting aloys; alloys AC41A or AG40A
Zinc and zinc alloys - To reveal the microstructure
Zinc and zinc alloys - To reveal the microstructure in alloys of zinc with metals of the iron group
Zinc oxide (ZnO) - Removal of surface damage with above solution
Zinc oxide single crystal (ZnO) - Chemical polishing and etching
Zinc oxide-bismuth oxide - Chemical etching
Zinc oxide-bismuth oxide - ZnO x Bi2O3
Zinc oxide-bismuth oxide-antimony oxide-tin oxide - 5% Sb2O3, 1% Bi2O3, 1% SnO2
Zinc oxide-lithium oxide system (ZnO-1 at.% Li2O) - Chemical etching
Zinc selenide (ZnSe) - Chemical etching
Zinc selenide (ZnSe) - Chemical polishing
Zinc selenide (ZnSe) - Chemical polishing
Zinc selenide (ZnSe) - Chemical polishing
Zinc selenide (ZnSe) - Etchant for zinc selenide single crystals
Zinc single crystal - Sample preparation procedure
Zinc specimens - Chemical etching
Zinc specimens - Chemical etching
Zinc sulphide (ZnS) - Chemical etching
Zinc sulphide (ZnS) - Chemical polishing and etching
Zinc telluride (ZnTe) - Chemical etching
Zinc telluride (ZnTe) - Chemical polishing and etching
Zinc-aluminium-copper alloys (Zn-Al-Cu) - Ion beam etching
Zinc-aluminium-copper alloys (Zn-Al-Cu) - Ion beam etching
Zinc-aluminium-copper alloys (Zn-Al-Cu) - Ion beam etching
Zinc-aluminium-copper alloys (Zn-Al-Cu) - Ion beam etching
Zircalloy-2, Hf - Attack polishing
Zircalloy-4 - Chemical etching
Zircaloy - EBSD sample preparation
Zircaloy 2 (Zr-Sn alloy) - Electrolytic etching
Zircaloy 4 (Zr-1.2/1.7% Sn) - Chemical polishing
Zircaloy 4 - Zr-1.2/1.7Sn-0.18/0.24Fe-0.07/0.13Cr - Chemical polishing
Zircaloy 4 - Zr-1.4Sn-0.2Fe-0.1C
Zircaloy 4-Zirconia system - Zr (1.2-1.7% Sn)-ZrO2 (O2 up to 2%)
Zircaloy with precipitates - Anodizing
Zircaloy-2 and Hf - Chemical etching
Zircaloy-2 and Hf - Chemical etching
Zircaloy-2, Hf - Chemical polishing
Zircaloy-4 - Chemical polishing
Zirconia (ZrO2) - Chemical etching
Zirconia ZrO3 (CaO stabilised) - Chemical etching
Zirconia-scandia system (ZrO2-Sc2O3) - Chemical etching
Zirconium - Alpha-Zr
Zirconium - Attack polishing
Zirconium - Attack polishing
Zirconium - Attack polishing
Zirconium - Attack polishing
Zirconium - Attack polishing
Zirconium - Attack polishing
Zirconium - Cathodic etching
Zirconium - Cathodic etching
Zirconium - Chemical etching
Zirconium - Chemical etching
Zirconium - Chemical etching
Zirconium - Chemical etching
Zirconium - Chemical machining
Zirconium - Chemical polishing
Zirconium - Chemical polishing
Zirconium - Chemical polishing
Zirconium - Dislocation etching
Zirconium - Dislocation etching
Zirconium - Electrolytic etching
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic polishing
Zirconium - Electrolytic thinning
Zirconium - Good general-purpose electrolyte
Zirconium - Heat tint etching
Zirconium - Jet electrolytic thinning
Zirconium - One of the best electrolyte for universal use
Zirconium - Polish and etch simultaneously - Electrolytic polishing
Zirconium - Pure and low alloy Hf and Zr for observation in polarized light, Zr-U, Zr-Al, Hf-Re alloys
Zirconium - Universal electrolyte
Zirconium - Zr and Hf base alloys, Zr-Nb alloys
Zirconium - Zr and its alloys
Zirconium - Zr, Zr-Be, Zr-H, and Zr-Nb alloys, Zircaloy
Zirconium - Zr-Mg, Zr-Mo, Zr-Sn, Zr-U, Zr-B, Zr-Fe, Zr-Ni alloys
Zirconium - Zr-Th, Zr-Sn, Zr-Nb, Zr-Cu, Zr-Si, Zr-Ni alloys
Zirconium and zirconium alloys - Suitable for zirconium and Zircalloy II
Zirconium and zirconium alloys - Suitable for zirocnium and Zircalloy II
Zirconium boride - Electrolytic etching
Zirconium boride ZrB2 - Chemical etching
Zirconium diboride - Chemical etching
Zirconium diboride - Chemical etching
Zirconium diboride single crystals - Electrolytic thinning
Zirconium dioxide ZrO2 - Etching
Zirconium hydride phases - Chemical etching
Zirconium nitride (ZrN) - ZrN-ZrN(0.55)
Zirconium oxide (ZrO2) - Chemical etching
Zirconium oxide (ZrO2) - Chemical etching
Zirconium oxide (ZrO2) - Chemical etching -General microstructure
Zirconium oxide (ZrO2) - Etching for microstructure
Zirconium oxide (ZrO2) - Physical etching
Zirconium oxide (ZrO2) - Physical etching
Zirconium specimens - Chemical etching
Zirconium specimens - Chemical etching
Zirconium-thorium-oxygen system (Zr-ThO2, Zr-Th x ThO2) - Chemical polishing
Zirconium-yttrium-oxygen system (Zr-Y2O3) - Chemical polishing
Zn (0001) cleaved wafers
Zn (0001) freshly cleaved surface - Acid, defect
Zn (0001) platelets - Chemical cleaning
Zn (0001) single crystal wafers - Metal decoration
Zn (0001) specimens - Electrolytic polishing
Zn (0001) wafers - Chemical etching
Zn (0001) wafers - Chemical etching
Zn (0001) wafers - Chemical polishing/etching
Zn (0001) wafers - Acid cutting
Zn (0001) wafers - Zn (0001) wafers used in an etch pit study
Zn (0001) wafers and ingots - Chemical polishing
Zn alloy single crystal platelets - Chemical polishing
Zn alloys - Chemical etching
Zn and Cu specimens - Ionized gas etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and Zn alloys - Electrolytic polishing - Dislocation etching
Zn and alloys - Chemical etching
Zn and lean alloys - Chemical etching
Zn cylinder with (10T0) prism orientation - Chemical etching
Zn diffused into GaAs wafers - Chemical etching
Zn diffused into InSb, (100), n-type wafers - Chemical etching
Zn pellets - Chemical cleaning
Zn phosphors - Solution used as a general removal etch
Zn phosphors - Solution used as a general removal etch
Zn single crystal - Chemical etching
Zn single crystal specimens - Acid, cutting
Zn single crystal specimens - Dislocation etching
Zn single crystal wafers - Zn single crystal wafers acid-saw cut using a braided SST wire and nitric acid
Zn single crystals - Chemical polishing
Zn specimens - Chemical etching
Zn specimens - Chemical polishing
Zn specimens - Electrolytic etching
Zn specimens - Electrolytic polishing
Zn specimens - Electrolytic polishing
Zn specimens - Electrolytic polishing
Zn specimens 3/8" thick - Acid, cutting
Zn wafers and single crystals - Zn (0001) cleaved wafers
Zn, Zn-Sn-Fe, Zn-Al-Cu - Electrolytic polishing
Zn-Al alloys - For alloy with 22% Al
Zn-Al alloys - For alloy with 22% Al
Zn-Al and Zn-Cr alloys, Zn-Fe layers in galvanized steel or ferrous materials - Chemical etching
Zn-Cu alloys - Electrolytic etching
Zn-Cu alloys - Electrolytic etching
Zn-Fe, Zn-Al, and Zn-Cr alloys and Zn coated steels - Chemical etching
Zn-Ge alloys (5/25 at.% Ge) - Electrolytic thinning for amorphous alloys
Zn-Sn-As system - Investigation of polishing behaviours of chemical mixtures on ZnSnAs material
Zn-Ti alloys - Chemical etching
Zn3As2 single crystal sphere - Thermal etching
Zn3P2 single crystal and thin film - Chemical etching
ZnCd - Chemical polishing
ZnHg specimen - Chemical etching
ZnHg specimens - Acid, cutting
ZnO (0001) and (10T0) wafers - Chemical etching
ZnO (0001) wafers from natural zincite - Chemical etching
ZnO (0O01) wafers - Chemical polishing
ZnO (1O1O) prism cut wafers - Chemical etching
ZnO (OOO1) as platelets and grains - Chemical etching
ZnO - Chemical etching
ZnO - Chemical etching
ZnO grain boundaries - Chemical etching
ZnO single crystal material - Thermal treatment
ZnO single crystal specimens - ZnO single crystal specimens used in a study of deformation
ZnO single crystal wafers - Chemical etching
ZnO specimens - Chemical etching
ZnO-Bi2O3-Co3O4-MnO2-Sb2O3-SiO2 - Chemical etching
ZnS (0001) hexagonal wafers - Chemical cleaning
ZnS (001) wafers - Chemical etching
ZnS (100) wafers - Chemical polishing
ZnS (111) cleaved wafers - Chemical etching
ZnS (111) wafers - Chemical etching
ZnS (111) wafers - Chemical etching
ZnS (111) wafers - Dislocation etching
ZnS (synthetic) - Dislocation etching
ZnS single crystal wafers - Chemical etching
ZnSe (100) wafers - Chemical etching
ZnSe (100) wafers - Chemical etching
ZnSe (100) wafers - Chemical polishing
ZnSe (110) wafers - Dislocation etching
ZnSe (111) (SI) wafers - Chemical cleaning
ZnSe (111) wafers - Chemical etching
084236
ZnSe single crystal platelets - Chemical etching
ZnSe single crystal wafers - Chemical etching
ZnSe single crystal wafers - Chemical polishing
ZnSe thin films - Chemical cleaning/polishing
ZnSe-S (111) (SI) wafers and ZnSe single crystals - Chemical cleaning
ZnSiF2 single crystals - Chemical etching
ZnSiP2 (100) single crystal wafers - Chemical polishing
ZnSnAs2 single crystals - Chemical etching
ZnSnP2 thin films grown on GaAs - Chemical etching
ZnTe (110) wafers and ingots - Dislocation etching
ZnTe (111) wafers - Chemical etching
ZnTe (111) wafers - Chemical etching
ZnTe (111) wafers - Chemical etching
ZnTe (111) wafers - Chemical polishing
ZnTe (111) wafers - Chemical polishing/etching
ZnTe (111) wafers - Dislocation etching
ZnTe (111) wafers - Thermal etching
ZnTe specimens - Chemical cleaning
ZnTe thin films - Acid, float-off
ZnTe thin films - Chemical etching
ZnW (001) cleaved wafers - Chemical etching
ZnW (001) cleaved wafers - Chemical polishing
Zr (0001) and (1010) wafers - Electrolytic polishing
Zr alloys - Chemical etching
Zr alloys - Chemical etching
Zr alloys - Electrolytic etching
Zr alloys - Electrolytic etching
Zr alloys - Electrolytic etching
Zr alloys containing Al, Be, Fe, Ni and Si - Chemical etching
Zr alloys containing Al, Be, Fe, Ni, Si and up to 10% Pt - Chemical etching
Zr alloys with intermetallic phases, oxides, nitrides and hydrides - Anodizing
Zr and Zr alloy - Electrolytic thinning by modified Bollman technique
Zr and Zr alloys - Chemical etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr alloys - Electrolytic polishing - Dislocation etching
Zr and Zr base alloy - Anodic etching
Zr and Zr base alloys - Chemical and electrolytic etching
Zr and Zr-Al and Zr-U alloys - Chemical etching
Zr and Zr-Th alloys - Chemical etching
Zr and Zr-U alloys - Chemical etching
Zr and alloys - Chemical etching
Zr and alloys - Chemical etching
Zr and alloys of Zr and 5% Ta - Chemical etching
Zr poly sheet - Chemical thinning
Zr poly sheet - Chemical thinning
Zr polycrystalline rod - Chemical cleaning
Zr polycrystalline rod - Electrolytic polishing
Zr polycrystalline sheet - Chemical cleaning/etching
Zr single crystal
Zr specimens - Chemical etching
Zr specimens - Chemical etching
Zr specimens - Chemical polishing
Zr specimens - Chemical polishing
Zr specimens - Chemical slurry polishing
Zr thin film - Chemical etching
Zr, 4% Sn, and 1.6% Mo alloy - Chemical etching
Zr, Hf and alloys - Chemical etching
Zr, Hf, Zircaloys - Chemical polishing
Zr, Zr-2.5% Nb alloy, Zircaloy-2, Zircaloy-4, Hf - Chemical polishing
Zr, Zr-Ni, Zr-Cr, Zr-Si, Zr-Ag, and Zr-Al alloys - Chemical etching
Zr, Zr-Si, Zr-B, Zr-Nb, and Zr-Fe alloys - Chemical etching
Zr-2.5Nb alloy - Electrolytic polishing - Dislocation etching
Zr-Al alloy - For alloy with 1% Al
Zr-Be, and Zr-H alloys, pure Zr, Zircaloy - Chemical polishing
Zr-C system - Chemical etching
Zr-Ce-O system - Zr-Ce2O3 x 2ZrO2
Zr-Co-Si system - Zr(85-x) Co(x) Si(15)
Zr-Cr alloy - Zr-2Cr - Electrolytic thinning
Zr-Cr alloys - Chemical polishing
Zr-Cr-Fe alloy - Zr-2 at.% Cr-0.16 at.% Fe
Zr-Cr-O alloys (Zr-rich) - Chemical polishing
Zr-Cr-O alloys, Zr alloys other than Zircaloys - Chemical polishing
Zr-Cr-Si alloy - Zr(85-x) Cr(x) Si(15) - Electrolytic thinning
Zr-Cu alloys - Chemical etching
Zr-Cu alloys - For alloys with 0.1-0.8 wt.% Cu
Zr-Cu eutectoid - Zr-1.6% Cu - Chemical polishing
Zr-Cu-Si alloy - Zr(85-x)Cu(x)Si15 - Electrolytic thinning
Zr-Fe-Si alloy - Electrolytic thinning for amorphous alloys
Zr-Hf system - Chemical etching
Zr-Hf-Si alloy - Zr(85-x)Hf(x)Si(15) - Electrolytic thinning for amorphous alloys
Zr-Hf-Ti alloys - Chemical etching
Zr-Mg and Zr-Ni alloys - Chemical etching
Zr-Mg, Zr-Sn, and Zr-U alloys - Chemical etching
Zr-Mn alloy - Alloys with 0.5-2.0 at. % Mn
Zr-Mo alloy - Beta Zr-Mo, alloys with 2-6% Mo
Zr-Mo-Si alloy - Zr(85-x) Mo(x) Si(15)
Zr-Nb alloy - Cathodic etching
Zr-Nb alloys - Chemical etching
Zr-Nb alloys - Chemical etching
Zr-Nb-Cr alloy - 0.5 wt.% Nb, 1% Cr
Zr-Nb-Si alloy - Zr(85-x) Nb(x) Si(15)
Zr-Ni eutectics and Zr-Si alloys - Chemical etching
Zr-Ni-Co system - Chemical etching
Zr-Ni-Co system - Twin jet electrolytic thinning
Zr-Ni-Si alloy - Zr(85-x) Ni(x) Si(15)
Zr-Si alloys - Chemical etching
Zr-Si system - Zr(100-x)Si(x) - Electrolytic thinning for amorphous alloys
Zr-Sn alloy (Zircaloy 2 1-3% Sn) - Electrolytic thinning
Zr-Sn alloy (Zircaloy 2 1-3% Sn) - Electrolytic thinning
Zr-Sn, Zr-Mo, Zr-Cu, Zr-Si, Zr-N, Zr-O, and Zr-Al alloys - Chemical etching
Zr-Ta-Si alloy - Zr(85-x)Ta(x)Si(15) - Electrolytic thinning for amorphous alloys
Zr-Th alloys - Chemical polishing
Zr-Th alloys - Electrolytic polishing
Zr-Th, Zr-Sn and Zr-Nb alloys - Chemical etching
Zr-Ti-Si alloy - Electrolytic thinning for amorphous alloys
Zr-V-Si alloy - Zr(85-x)V(x)Si(15) - Electrolytic thinning for amorphous alloys
Zr-W-Si alloy - Zr(85-x)W(x)Si(15) - Electrolytic thinning for amorphous alloys
Zr-W-Ta alloys - Chemical etching
Zr2Ni single crystal specimen - Chemical etching
Zr2Ni single crystals - Chemical etching
Zr3Al based alloys - Chemical etching
Zr3Al-based alloys - Attack polishing
Zr3Al-based alloys - Chemical etching
ZrB and other zirconium borides - Chemical etching
ZrB, ZrB2, Zr3B4, and ZrB12 specimens - Chemical etching
ZrB2 - Chemical etching
ZrC - Chemical etching
ZrC - Chemical etching
ZrN (100) wafers - Thermal cleaning
ZrN - Chemical etching
ZrN thin films - Chemical cleaning
ZrO2 - Chemical ecthing
ZrO2 - Chemical etching
ZrO2 single crystal specimen and ZrO2 thin film - Chemical etching
ZrO2 single crystal specimens - General etching
ZrO2 specimens with low Hafnium content - Chemical cleaning/polishing
ZrO2 thin film deposits - Electrolytic polishing
ZrO2 with MgO, CaO - Physical etching
ZrO2, Zr2O3 - Chemical etching
ZrO2-TZP (Y2O3, RE oxide, TiO2), ZrO2-PSZ (Y2O3, MgO, CaO), ZrO2-CSZ (ZrO2, MgO, CaO), ZrO-ZTC
ZrO2-TZP, ZrO2-PSZ, ZrO2-CSZ, ZrO2-ZTC - Chemical etching
ZrS2 single crystal specimens - Sample etching
ZrV single crystal metallic alloy - Chemical etching
a-Ge as thin film material deposited on NaCl (100) substrates - Float-off
a-Ge evaporated on fused quartz blanks
a-Ge thin film grown on NaCl-Acid, float-off
a-Ge thin films deposited on NaCl - Acid, float-off
a-Ge-H and a-Si-H hydrogenated thin films - Chemical cleaning/etching
a-Nb3Ge compound - Physical etching
a-Si thin film, 300 A thick - Film removal
a-Si-H thin film deposited on an a-SiO(x)N(y)H thin film - Chemical etching
a-Si-H thin films - Electrical defect
a-Si-H thin films grown on SiO2, Al2O3, and ZrO2 substrates - Chemical etching
a-Si3N4-H thin films - Ionized gas etching
a-SiC-H amorphous thin films - Ionized gas etching
a-SiC-H amorphous thin films 500-3500 A thick - Chemical etching
a-SiC-H thin films - Chemical etching
a-SiC-H thin films - Metal pinhole decoration
a-SiC-H thin films deposited on Si (100) substrates - Chemical etching
a-SiC-H thin films deposited on Si (100) substrates - Chemical etching
a-SiN-H thin films deposited on (100) silicon and germanium wafers - Chemical etching
a-SiO2 thin films used as a diffusion mask on silicon wafers - Thermal conversion
a-WO3 thin films 499-8500 A thick - Chemical etching
i-C-Gas, growth
n-Bi2Te3 (0001) wafers - Chemical etching
n-GaP (111) and p-GaP (111) wafers - Chemical etching
p-Bi2Te3 (0001) cleaved wafers - Oxidation
p-GaP (100) wafers - Chemical etching